Synthesis, structure and properties of Li2Rh3B2

Li₂Rh₃B₂ has been synthesized at 1000 °C from a stoichiometric mix of rhodium and boron and an excess of lithium. Li₂Rh₃B₂ crystallizes in the orthorhombic space group Pbam (no. 55, Z=2) with room temperature lattice constants a=5.7712(1) Å, b=9.4377(2) Å, c=2.8301(1) Å and cell volume 154.149(6) Å³. The structure was solved from single crystal X-ray diffraction yielding the final R indices (all data) R1=2.8% and wR2=4.7%. The structure is a distortion of the CeCo₃B₂ structure type, containing a network of Rh₆B trigonal prisms and short Li-Li contacts of 2.28(2) Å. Li₂Rh₃B₂ is a diamagnetic metal with a room temperature resistivity of 19 μΩ cm, as determined by magnetic susceptibility and single crystal transport measurements. The measured diamagnetism and electronic structure calculations show that Li₂Rh₃B₂ contains rhodium in a d¹⁰ configuration.     

Quaternary selenostannates Na2−xGa2−xSn1+xSe6 and AGaSnSe4 (A=K, Rb, and Cs) through rapid cooling of melts. Kinetics versus thermodynamics in the polymorphism of AGaSnSe4

The quaternary alkali-metal gallium selenostannates, Na_2−xGa_2−xSn_1+xSe₆ and AGaSnSe₄ (A=K, Rb, and Cs), were synthesized by reacting alkali-metal selenide, Ga, Sn, and Se with a flame melting-rapid cooling method. Na_2−xGa_2−xSn_1+xSe₆ crystallizes in the non-centrosymmetric space group C2 with cell constants a=13.308(3) Å, b=7.594(2) Å, c=13.842(3) Å, β=118.730(4)°, V=1226.7(5) Å³. α-KGaSnSe₄ crystallizes in the tetragonal space group I4/mcm with a=8.186(5) Å and c=6.403(5) Å, V=429.1(5) Å³. β-KGaSnSe₄ crystallizes in the space group P2₁/c with cell constants a=7.490(2) Å, b=12.578(3) Å, c=18.306(5) Å, β=98.653(5)°, V=1705.0(8) Å³. The unit cell of isostructural RbGaSnSe₄ is a=7.567(2) Å, b=12.656(3) Å, c=18.277(4) Å, β=95.924(4)°, V=1741.1(7) Å³. CsGaSnSe₄ crystallizes in the orthorhombic space group Pmcn with a=7.679(2) Å, b=12.655(3) Å, c=18.278(5) Å, V=1776.1(8) Å³. The structure of Na_2−xGa_2−xSn_1+xSe₆ consists of a polar three-dimensional network of trimeric (Sn,Ga)₃Se₉ units with Na atoms located in tunnels. The AGaSnSe₄ possess layered structures. The compounds show nearly the same Raman spectral features, except for Na_2−xGa_2−xSn_1+xSe₆. Optical band gaps, determined from UV-Vis spectroscopy, range from 1.50 eV in Na_2−xGa_2−xSn_1+xSe₆ to 1.97 eV in CsGaSnSe₄. Cooling of the melts of KGaSnSe₄ and RbGaSnSe₄ produces only kinetically stable products. The thermodynamically stable product is accessible under extended annealing, which leads to the so-called γ-form (BaGa₂S₄-type) of these compounds.     

Synthesis and thermochemistry of SrB2O4·4H2O and SrB2O4

Two pure strontium borates SrB₂O₄·4H₂O and SrB₂O₄ have been synthesized and characterized by means of chemical analysis and XRD, FT-IR, DTA-TG techniques. The molar enthalpies of solution of SrB₂O₄·4H₂O and SrB₂O₄ in 1 mol dm⁻³ HCl(aq) were measured to be −(9.92 ± 0.20) kJ mol⁻¹ and −(81.27 ± 0.30) kJ mol⁻¹, respectively. The molar enthalpy of solution of Sr(OH)₂·8H₂O in (HCl + H₃BO₃)(aq) were determined to be −(51.69 ± 0.15) kJ mol⁻¹. With the use of the enthalpy of solution of H₃BO₃ in 1 mol dm⁻³ HCl(aq), and the standard molar enthalpies of formation for Sr(OH)₂·8H₂O(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpies of formation of −(3253.1 ± 1.7) kJ mol⁻¹ for SrB₂O₄·4H₂O, and of −(2038.4 ± 1.7) kJ mol⁻¹ for SrB₂O₄ were obtained.     

On the electronic and structural properties of aluminum diboride Al0.9B2

Single crystals of aluminum diboride (space group P6/mmm, No. 191) a=3.0050(1) Å, c=3.2537 (8)  Å; Z=1) were prepared by the aluminum flux method. Crystal structure refinement shows defects at the aluminum site and resulted in composition Al_0.894(9)B₂≈Al_0.9B₂. The defect structure model is confirmed by the measured mass density ρ_exp=2.9(1) g/cm³ in comparison with a calculated value ρ_x=3.17 g/cm³ for full occupancy of the aluminum position. The results of ¹¹B NMR measurements support the defect model and are in agreement with the structure obtained by X-ray diffraction methods. Electrical resistivity measured on a single crystal parallel to its hexagonal basal plane with ρ(300 K)−ρ(2 K)=2.35 μΩ cm shows temperature dependence like a typical metal. Charge is dominantly carried by holes (Hall-coefficient R=+2×10⁻¹¹ m/C). Respective, p-type conductivity is confirmed by theoretical calculations. Chemical bonding in aluminum diboride is discussed using the electron localization function.     

Thermodynamic studies on SrFe12O19(s), SrFe2O4(s), Sr2Fe2O5(s) and Sr3Fe2O6(s)

The citrate-nitrate gel combustion route was used to prepare SrFe₂O₄(s), Sr₂Fe₂O₅(s) and Sr₃Fe₂O₆(s) powders and the compounds were characterized by X-ray diffraction analysis. Different solid-state electrochemical cells were used for the measurement of emf as a function of temperature from 970 to 1151 K. The standard molar Gibbs energies of formation of these ternary oxides were calculated as a function of temperature from the emf data and are represented as (SrFe₂O₄, s, T)/kJ mol⁻¹ (±1.7)=−1494.8+0.3754 (T/K) (970?T/K?1151). (Sr₂Fe₂O₅, s, T)/kJ mol⁻¹ (±3.0)=−2119.3+0.4461 (T/K) (970?T/K?1149). (Sr₃Fe₂O₆, s, T)/kJ mol⁻¹ (±7.3)=−2719.8+0.4974 (T/K) (969?T/K?1150).Standard molar heat capacities of these ternary oxides were determined from 310 to 820 K using a heat flux type differential scanning calorimeter (DSC). Based on second law analysis and using the thermodynamic database FactSage software, thermodynamic functions such as Δ_fH°(298.15 K), S°(298.15 K) S°(T), C_p°(T), H°(T), {H°(T)-H°(298.15 K)}, G°(T), free energy function (fef), Δ_fH°(T) and Δ_fG°(T) for these ternary oxides were also calculated from 298 to 1000 K.     

The new binary intermetallic YbGe2.83

The new compound YbGe_2.83 was obtained from the reaction of Yb and Ge in liquid indium. The crystal structure of YbGe_2.83 adopts the trigonal, P3?m1 space group with a=b=8.3657(12) Å and c=7.0469(14) Å. The structure of YbGe_2.83 is a variant of the CaAl₂Si₂ structure type with ordered vacancies. Germanium atoms form double layers of puckered hexagons creating slabs that sandwich the Yb atoms. YbGe_2.83 can be classified as a Zintl compound with the formula Yb^(2+x)+(Ge_2.83)^(2+x)−. The deficiencies at the Ge sites cause a mixed/intermediate valent state of ytterbium (Yb^2.35+). Valence bond sum calculations suggest an average valence of Yb ions in YbGe_2.83 of 2.51 consistent with an intermediate valence compound.     

K2Li(NH2)3 and K2Na(NH2)3—synthesis and crystal structure of two crystal-chemically isotypic mixed-cationic amides

K₂Li(NH₂)₃ (1) was the only crystalline product obtained from the reaction of potassium with dilithium decahydro-closo-decaborate Li₂B₁₀H₁₀ in liquid ammonia at −38 °C. The compound crystallizes in the space group P4₂/m with Z=4, a=6.8720(5) Å, c=11.706(1) Å and V=552.81(7) Å³. The investigated crystal-chemically isotypic sodium compound K₂Na(NH₂)₃ (2) was merohedrally twinned and crystallized from a reaction mixture containing potassium and disodium decahydro-closo-decaborate Na₂B₁₀H₁₀ in liquid ammonia with a=7.0044(5) Å, c=12.362(1) Å and V=606.48(9) Å³. The compounds contain pairs of edge sharing tetraamidolithium or tetraamidosodium tetrahedra which are interconnected by potassium ions forming three-dimensional infinite networks.     

Magnetostructural correlations in the antiferromagnetic Co2−x Cux(OH)AsO4 (x=0 and 0.3) phases

The Co_2−xCu_x(OH)AsO₄ (x=0 and 0.3) compounds have been synthesized under mild hydrothermal conditions and characterized by X-ray single-crystal diffraction and spectroscopic data. The hydroxi-arsenate phases crystallize in the Pnnm orthorhombic space group with Z=4 and the unit-cell parameters are a=8.277(2) Å, b=8.559(2) Å, c=6.039(1) Å and a=8.316(1) Å, b=8.523(2) Å, c=6.047(1) Å for x=0 and 0.3, respectively. The crystal structure consists of a three-dimensional framework in which M(1)O₅-trigonal bipyramid dimers and M(2)O₆-octahedral chains (M=Co and Cu) are present. Co₂(OH)AsO₄ shows an anomalous three-dimensional antiferromagnetic ordering influenced by the magnetic field below 21 K within the presence of a ferromagnetic component below the ordering temperature. When Co²⁺ is partially substituted by Cu²⁺ions, Co_1.7Cu_0.3(OH)AsO₄, the ferromagnetic component observed in Co₂(OH)AsO₄ disappears and the antiferromagnetic order is maintained in the entire temperature range. Heat capacity measurements show an unusual magnetic field dependence of the antiferromagnetic transitions. This λ-type anomaly associated to the three-dimensional antiferromagnetic ordering grows with the magnetic field and becomes better defined as observed in the non-substituted phase. These results are attributed to the presence of the unpaired electron in the dx²−y² orbital and the absence of overlap between neighbour ions.     

Third- and second-order optical nonlinearity of Ge-Ga-S-PbI2 chalcohalide glasses

Two series of metal iodide doped chalcohalide glasses (100−2x)GeS₂·xGa₂S₃·xPbI₂ (0?x?20) and (100−x)(0.8GeS₂·0.2Ga₂S₃)·xPbI₂ (0?x?15) were prepared and characterized. The microstructure of these glasses has been studied by Raman scattering spectra. Utilizing femtosecond time-resolved optical Kerr effect (OKE) technique at the wavelength of 820 nm, a largest third-order nonlinearity χ⁽³⁾ of 2.07×10⁻¹³ esu was obtained for the 90GeS₂·5Ga₂S₃·5PbI₂ glass, and it decreases with the addition of PbI₂ in both two series. After thermally poled, second-harmonic generation (SHG) has been observed in these glasses according to Maker fringe method and a large second-order nonlinearity χ⁽²⁾ as well as 4 pm/V was obtained for the 70GeS₂·15Ga₂S₃·15PbI₂ glass. The variations of χ⁽²⁾ and χ⁽³⁾ on glass composition are ascribed to the evolution of micro-structural units in glass. These novel chalcohalide glasses would be expected to be the promising candidate materials for nonlinear optical devices.     

Crystal structure and magnetic properties of Na2Ni(HPO3)2

Na₂Ni(HPO₃)₂, obtained as light yellow-green crystals under mild hydrothermal conditions, crystallizes in the orthorhombic Pnma space-group with lattice parameters: a=11.9886(3), b=5.3671(2), c=9.0764(3) Å, V=584.01 Å³, Z=4. The structure consists of zig-zag chains of NiO₆ octahedra bridged by two HPO₃²⁻ and the chains are further connected through HPO₃²⁻ to four nearest chains to form a three dimensional framework, delimiting intersecting tunnels in which the sodium ions are located. The Na cations reside in the irregular Na(1)O₅, Na-O of 2.276-2.745 Å, and Na(2)O₉, Na-O of 2.342-2.376 Å, environments. The presence of the phosphite monoanion has been further confirmed by IR spectroscopy. Due to the 3D framework of Ni connected by O-P-O bridges, the magnetic susceptibility behaves as a paramagnet above 100 K (C=1.49(2) emu K mol⁻¹, μ_eff=3.45 μ_B, Θ=−39(2) K) and below 6 K, it orders antiferromagnetically as confirmed the sharp drop and the non-Brillouin behavior of the isothermal magnetization at 2 K.     

Crystal structure and physical properties of the novel ternary intermetallics URuSi3−x and U3Ru2Si7

Two novel ternary intermediate phases, namely URuSi_3−x (x=0.11) and U₃Ru₂Si₇ were found in the Si-rich part of the U-Ru-Si phase diagram. Single crystal X-ray diffraction measurements, carried out at room temperature, indicated that URuSi_3−x crystallizes in its own tetragonal type structure (space group P4/nmm, no. 129; unit cell parameters: a=12.108(1) Å and c=9.810(1) Å), being a derivative of the BaNiSn₃-type structure. U₃Ru₂Si₇ adopts in turn a disordered orthorhombic La₃Co₂Sn₇-type structure (space group Cmmm, no. 65; unit cell parameters: a=4.063(1) Å, b=24.972(2) Å and c=4.072(1) Å). As revealed by magnetization, electrical resistivity and specific heat measurements, both compounds order magnetically at low temperatures. Namely URuSi_3−x is a ferromagnet with T_C=45 K, and U₃Ru₂Si₇ shows ferrimagnetic behavior below T_C=29 K.     

Synthesis, crystal structure and mono-dimensional thallium ion conduction of TlFe0.22Al0.78As2O7

A new solid solution TlFe_0.22Al_0.78As₂O₇ has been synthesized by a solid-state reaction. The structure of the title compound has been determined from a single-crystal X-ray diffraction and refined to final values of the reliability factors: R(F²)=0.030 and wR(F²)=0.081 for 1343 independent reflections with I>2σ(I). It crystallizes in the triclinic space group P-1, with a=6.296(2) Å, b=6.397(2) Å, c=8.242(2) Å, α=96.74(2)°, β=103.78(2)°, γ=102.99(3)°, V=309.0(2) Å³ and Z=2. The structure can be described as a three-dimensional framework containing (Fe/Al)O₆ octahedra connected through As₂O₇ groups. The metallic units and diarsenate groups share oxygen corners to form a three-dimensional framework with interconnected tunnels parallel to the a, b and c directions, where Tl⁺ cations are located. The ionic conductivity measurements are performed on pellets of the polycrystalline powder. At 683 K, The conductivity value is 5.23×10⁻⁶ S cm⁻¹ and the ionic jump activation energy is 0.656 eV. The bond valence analysis reveals that the ionic conductivity is ensured by Tl⁺ along the [001] direction.     

A new phase in the system lithium-aluminum: Characterization of orthorhombic Li2Al

Investigation of the Li rich part of the binary Li-Al system revealed the existence of a new phase, orthorhombic Li₂Al, which is isostructural to Li₂Ga and Li₂In. The crystal structure was determined from single crystal X-ray diffraction data (Cmcm, a=4.658(2) Å, b=9.767(4) Å, c=4.490(2) Å, Z=4). Refinement of atomic position site occupancies yielded a composition Li_1.92Al_1.08 (64 at% Li) indicating a small homogeneity range, Li_2−xAl_1+x. Li₂Al is the peritectic decomposition product of the stoichiometric compound Li₉Al₄, which is stable below 270±2 °C. Li₂Al itself decomposes peritectically to Li₃Al₂ and Li rich melt at 335±2 °C. The discovery of Li₂Al (Li_2−xAl_1+x) settles a long standing inconsistency in the Li-Al phase diagram which was based on the assumption that Li₉Al₄ possesses a high temperature modification.     

Mn environment in layered Li[Mg0.5−xNixMn0.5]O2 oxides monitored by EPR spectroscopy

X-band and high-frequency EPR spectroscopy were used for studying the manganese environment in layered Li[Mg_xNi_0.5−xMn_0.5]O₂, 0?x?0.5. Both layered LiMg_0.5Mn_0.5O₂ and monoclinic Li[Li_1/3Mn_2/3]O₂ oxides (containing Mn⁴⁺ ions only) were used as EPR standards. The EPR study was extended to the Ni-substituted analogues, where both Ni²⁺ and Mn⁴⁺ are paramagnetic. For LiMg_0.5−xNi_xMn_0.5O₂ and Li[Li_(1−2x)/3Ni_xMn_(2−x)/3]O₂, an EPR response from Mn⁴⁺ ions only was detected, while the Ni²⁺ ions remained EPR silent in the frequency range of 9.23-285 GHz. For the diamagnetically diluted oxides, LiMg_0.25Ni_0.25Mn_0.5O₂ and Li[Li_0.10Ni_0.35Mn_0.55]O₂, two types of Mn⁴⁺ ions located in a mixed (Mn-Ni-Li)-environment and in a Ni-Mn environment, respectively, were registered by high-field experiments. In the X-band, comparative analysis of the EPR line width of Mn⁴⁺ ions permits to extract the composition of the first coordination sphere of Mn in layered LiMg_0.5−xNi_xMn_0.5O₂ (0?x?0.5) and Li[Li_(1−2x)/3Ni_xMn_(2−x)/3]O₂ (x>0.2). It was shown that a fraction of Mn⁴⁺ are in an environment resembling the ordered “α,β”-type arrangement in Li_1−δ1Ni_δ1[Li_{(1−2x)/3+δ1}Ni_2x/3−δ1)_α(Mn_(2−x)/3Ni_x/3)_β]O₂ (where and δ₁=0.06 were calculated), while the rest of Mn⁴⁺ are in the Ni,Mn-environment corresponding to the Li_1−δ2Ni_δ2[Ni_1−yMn_y]O₂ () composition with a statistical Ni,Mn distribution. For Li[Li_(1−2x)/3Ni_xMn_(2−x)/3]O₂ with x?0.2, IR spectroscopy indicated that the ordered α,β-type arrangement is retained upon Ni introduction into monoclinic Li[Li_1/3Mn_2/3]O₂.     

Three-dimensional molecular network, [{Cu(dps)2(SO4)}·3H2O·DMF]n, and its different third-order NLO performance (dps=4,4′-dipyridyl sulfide)

A new three-dimensional non-interpenetrating coordination polymer, [{Cu(dps)₂(SO₄)}·3H₂O·DMF]_n (1) (dps=4,4′-dipyridyl sulfide) was synthesized and structurally characterized. 1 crystallizes in triclinic system, space group P−1 with cell parameters of a=10.9412(1) Å, b=11.8999(1) Å, c=12.5057(1) Å, V=1400.7(3) Å³, Z=2, D_c=1.573 g cm⁻³, F(0 0 0)=686, μ=1.059 mm⁻¹. R₁=0.0436, wR₂=0.1148. In the polymeric architecture, serve as bridging coligands to connect highly puckered [Cu₂(dps)₂]_n frameworks resulting in a 3D motif containing channels for guest molecule inclusion. Quantum chemistry calculation shows that the third-order NLO properties of polymer 1 are controlled by groups and dps ligands, and metal ions have less influence on the third-order NLO properties.     

New one-dimensional uranyl and neptunyl iodates: crystal structures of K3[(UO2)2(IO3)6](IO3)·H2O and K[NpO2(IO3)3]·1.5H2O

The uranyl and neptunyl(VI) iodates, K₃[(UO₂)₂(IO₃)₆](IO₃)·H₂O (1) and K[NpO₂(IO₃)₃]·1.5H₂O (2), have been prepared and crystallized under mild hydrothermal conditions. The structures of 1 and 2 both contain one-dimensional _∞¹[AnO₂(IO₃)₃]¹⁻(An=U,Np) ribbons that consist of approximately linear actinyl(VI) cations bound by iodate anions to yield AnO₇ pentagonal bipyramids. The AnO₇ units are linked by bridging iodate anions to yield chains that are in turn coupled by additional iodate anions to yield ribbons. The edges of the ribbons are terminated by monodentate iodate anions. For 1 and 2, K⁺ cations and water molecules separate the ribbons from one another. In addition, isolated iodate anions are also found between _∞¹[UO₂(IO₃)₃]¹⁻ ribbons in 1. In order to aid in the assignment of oxidation states in neptunyl containing compounds, a bond-valence sum parameter of 2.018 Å for Np(VI) bound exclusively to oxygen has been developed with b=0.37 Å. Crystallographic data (193 K, MoKα, λ=0.71073): 1, triclinic, , a=7.0609(4) Å, b=14.5686(8)  Å, c=14.7047(8)  Å, α=119.547(1)°, β=95.256(1)°, γ=93.206(1)°, Z=2, R(F)=2.49% for 353 parameters with 6414 reflections with I>2σ(I); (203 K, MoKα, λ=0.71073): 2, monoclinic, P2₁/c, a=7.796(4)  Å, b=7.151(3)  Å, c=21.79(1)  Å, β=97.399(7)°, Z=4, R(F)=6.33% for 183 parameters with 2451 reflections with I>2σ(I).     

The study of Bi3B5O12: synthesis, crystal structure and thermal expansion of oxoborate Bi3B5O12

The paper presents a new data on the crystal structure, thermal expansion and IR spectra of Bi₃B₅O₁₂. The Bi₃B₅O₁₂ single crystals were grown from the melt of the same stoichiometry by Czochralski technique. The crystal structure of Bi₃B₅O₁₂ was refined in anisotropic approximation using single-crystal X-ray diffraction data. It is orthorhombic, Pnma, a=6.530(4), b=7.726(5), c=18.578(5) Å, V=937.2(5) Å³, Z=4, R=3.45%. Bi³⁺ atoms have irregular coordination polyhedra, Bi(1)O₆ (d(B-O)=2.09-2.75 Å) and Bi(2)O₇ (d(B-O)=2.108-2.804 Å). Taking into account the shortest bonds only, these polyhedra are considered here as trigonal Bi(1)O₃ (2.09-2.20 Å) and tetragonal Bi(2)O₄ (2.108-2.331 Å) irregular pyramids with Bi atoms in the tops of both pyramids. The BiO₄ polyhedra form zigzag chains along b-axis. These chains alternate with isolated anions [B₂^IVB₃^IIIO₁₁]⁷⁻ through the common oxygen atoms to form thick layers extended in ab plane. A perfect cleavage of the compound corresponds to these layers and an imperfect one is parallel to the Bi-O chains. The Bi₃B₅O₁₂ thermal expansion is sharply anisotropic (α₁₁≈α₂₂=12, α₃₃=3×10⁻⁶ °C⁻¹) likely due to a straightening of the flexible zigzag chains along b-axis and decreasing of their zigzag along c-axis. Thus the properties like cleavage and thermal expansion correlate to these chains.     

Hydrothermal synthesis, thermal, structural, spectroscopic and magnetic studies of the Mn5−xCox(HPO4)2(PO4)2(H2O)4 (x=1.25, 2, 2.5 and 3) finite solid solution

The Mn_5−xCo_x(HPO₄)₂(PO₄)₂(H₂O)₄ (x=1.25, 2, 2.5, 3) finite solid solution has been synthesized by mild hydrothermal conditions under autogeneous pressure. The phases crystallize in the C2/c space group with Z=4, belonging to the monoclinic system. The unit-cell parameters obtained from single crystal X-ray diffraction are: a=17.525(1), b=9.0535(6), c=9.4517(7) Å, β=96.633(5) ° being R1=0.0436, wR2=0.0454 for Mn75Co25; a=17.444(2), b=9.0093(9), c=9.400(1) Å, β=96.76(1) ° being R1=0.0381, wR2=0.0490 for Mn60Co40; a=17.433(2), b=8.9989(9), c=9.405(1) Å, β=96.662(9) ° being R1=0.0438, wR2=0.0515 for Mn50Co50 and a=17.4257(9), b=8.9869(5), c=9.3935(5) Å, β=96.685(4) ° being R1=0.0296, wR2=0.0460 for Mn40Co60. The structure consists of a three dimensional network formed by octahedral pentameric entities (Mn,Co)₅O₁₆(H₂O)₆ sharing vertices with the (PO₄)³⁻ and (HPO₄)²⁻ tetrahedra. The limit of thermal stability of these compounds is, approximately, 165 °C, near to this mean temperature the phases loose their water content in two successive steps. IR spectra show the characteristic bands of the water molecules and the phosphate and hydrogen-phosphate oxoanions. The diffuse reflectance spectra are consistent with the presence of MO₆ octahedra environments in slightly distorted octahedral geometry, except for the M(3)O₆ octahedron which presents a remarkable distortion and so a higher Dq parameter. The mean value for the Dq and B-Racah parameter for the M(1),(2)O₆ octahedra is 685 and 850 cm⁻¹, respectively. These parameters for the most distorted M(3)O₆ polyhedron are 825 and 880 cm⁻¹, respectively. The four phases exhibit antiferromagnetic couplings as the major magnetic interactions. However, a small spin canting phenomenon is observed at low temperatures for the two phases with major content in the anisotropic-Co(II) cation.     

K2Re(NCS)6: A weak ferromagnet

The preparation of the potassium salt of hexathiocyanate Re(IV) as a pure and crystalline solid is described. The crystal structure for [{K(H₂O)₂}₂{Re(NCS)₆}] (P2₁/c, a = 8.29132(8) Å, b = 15.0296(2) Å, c = 8.5249(1) Å, β = 90.885(1)°, V = 1062.21(2) Å³) revealed the formation of a 3-D coordination polymer based on K-S linkages. This organization leads to rather short intermolecular S···S contacts. The magnetic behavior for the compound is characterized by substantial antiferromagnetic interactions (with Curie-Weiss parameters C = 1.93 cm³mol⁻¹ and θ = −171 K) that in turn lead to a weak ferromagnet with T_C = 13 K.     

Thermodynamic properties of hydrated sodium l-threonate Na(C4H7O5)·H2O(s)

Low-temperature heat capacities of the compound Na(C₄H₇O₅)·H₂O(s) have been measured with an automated adiabatic calorimeter. A solid-solid phase transition and dehydration occur at 290-318 K and 367-373 K, respectively. The enthalpy and entropy of the solid-solid transition are Δ_transH_m = (5.75 ± 0.01) kJ mol⁻¹ and Δ_transS_m = (18.47 ± 0.02) J K⁻¹ mol⁻¹. The enthalpy and entropy of the dehydration are Δ_dH_m = (15.35 ± 0.03) kJ mol⁻¹ and Δ_dS_m = (41.35 ± 0.08) J K⁻¹ mol⁻¹. Experimental values of heat capacities for the solids (I and II) and the solid-liquid mixture (III) have been fitted to polynomial equations.