On the propulsive efficiency of vibrating bodies in a subsonic gas flow

In the cited work [1], a variational problem of the minimum power required to obtain a given thrust for a wing with a surface able to vibrate in a supersonic flow is considered. In the present work the theoretical maximum efficiency in a subsonic flow of bodies whose shape can be simulated by unsteady sources is found. For axisymmetric bodies a shape is found giving an efficiency as close as required to the theoretical limit. The results obtained make it possible to evaluate possible improvements not only of artificial devices but also of living creatures, since they move at subsonic speeds.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 128–132, July–August, 1984.     

Influence of nozzle profile on the characteristics of a gas-dynamic laser

The results are given of numerical profiling and analysis of the influence of nozzle shape and the gas-dynamic parameters on the characteristics of gas-dynamic lasers. Investigation of the two-dimensional nonequilbrium flow in a family of similar nozzles and nozzles with different angles of inclination of the contracting part show that it is expedient to choose a shape of the subsonic part that ensures a straight sonic line. Relationships between the geometrical parameters of the subsonic and transonic part of the nozzle are recommended which ensure separationless flow and a shape of the sonic surface that is nearly flat. A parametric investigation was made of the supersonic section of two classes of planar gas-dynamic laser nozzles constructed on the basis of uniform and symmetric characteristics at the exit. The parametric investigations of the influence of the degree of expansion, the total pressure and the temperature, and also the gas composition show that the smallest losses of useful vibrational energy in the cavity are achieved for nozzles constructed on the basis of uniform characteristics.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 163–167, November–December, 1982.     

Thin axisymmetric cavities in a subsonic compressible flow

The investigation of subsonic compressible flow past thin axisymmetric cavities carried out in [1–3] is continued by the method of asymptotic expansions. The dependence of the elongation of the cavity on the cavitation number and the Mach number is obtained.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 174–177, September–October, 1987.The author is grateful to Yu. L. Yakimov for discussing his results.     

Numerical investigation of flow separation ahead of a step

A numerical investigation by means of the Navier-Stokes equations is used to solve the problem of the flow of a viscous perfect gas over a step at subsonic and supersonic velocities of the undisturbed flow and different Reynolds numbers. The dependence of the resulting separation flow on the parameters of the undisturbed flow is investigated. The gas-dynamic characteristics and the size of the separated flow are determined. The results of the calculations are compared with the experimental data of Chapman et al. [1].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No 5, pp. 72–79, September–October, 1979.     

Computation of base flow characteristics with uniform blowing

Blowing at bluff body base was considered under different conditions and for small amount of blowing this problem was solved using dividing streamline model [1]. The effect of supersonic blowing on the flow characteristics of the external supersonic stream was studied in [2–4]. The procedure and results of the solution to the problem of subsonic blowing of a homogeneous fluid at the base of a body in supersonic flow are discussed in this paper. Analysis of experimental results (see, e.g., [5]) shows that within a certain range of blowing rate the pressure distribution along the viscous region differs very little from the pressure in the free stream ahead of the base section. In this range the flow in the blown subsonic jet and in the mixing zones can be described approximately by slender channel flow. This approximation is used in the computation of nozzle flows with smooth wall inclination [6, 7]. On the other hand, boundary layer equations are used to compute separated stationary flows with developed recirculation regions [8] in order to describe the flow at the throat of the wake. The presence of blowing has significant effect on the flow structure in the base region. An increasing blowing rate reduces the size of the recirculation region [9] and increases base pressure. This leads to a widening of the flow region at the throat, usually described by boundary-layer approximations. At a certain blowing rate the recirculation region completely disappears which makes it possible to use boundary-layer equations to describe the flow in the entire viscous region in the immediate neighborhood of the base section.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 1, pp. 76–81, January–February, 1984.     

Unsteady reflection of a shock wave from a body with a cylindrical recess

In a number of cases of supersonic flow past bodies with recesses pulsations in the flow arise [1–3]. Experiments [4, 5] indicate that stabilization of the steady supersonic flow past the body with a recess on which a shock wave is incident takes place after a series of oscillations of the bow wave. Numerical calculation of the interaction of a supersonic jet with a cylindrical cavity [6] reveals that damped pressure pulsations arise inside the cavity if the jet is homogeneous, and undamped pulsations it is inhomogeneous. The authors explain the damping of the pulsations by the influence of artificial viscosity. This paper investigates experimentally and theoretically (by numerical methods) the oscillations of the bow shock wave and the parameters of the flow behind it in the case of unsteady reflection of a shock wave from a body with a cylindrical recess turned towards the flow. The problem is posed as follows. A plane shock wave with constant parameters impinges on a cylinder with a cavity. The unsteady flow originating from this interaction is investigated.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 199–202, September–October, 1984.     

Solution of the direct problem of the mixed flow of a conducting gas in a laval nozzle with a meridional magnetic field

We consider the direct problem in the theory of the axisymmetric Laval nozzle (including sonic transition) for the steady flow of an inviscid and nonheat-conducting gas of finite electrical conductivity. The problem is solved by numerical integration of the equations of unsteady gas flow using an explicit difference scheme that was proposed by Godunov [1,2], and was used to calculate steady and unsteady flows of a nonconducting gas in nozzles by Ivanov and Kraiko [3]. The subsonic and the supersonic flows of a conducting gas in an axisymmetric channel when there is no external electric field, the magnetic field is meridional, and the magnetic Reynolds numbers are small have previously been completely investigated. Thus, Kheins, Ioller and Élers [4] investigated experimentally and theoretically the flow of a conducting gas in a cylindrical pipe when there is interaction between the flow and the magnetic field of a loop current that is coaxial with the pipe. Two different approaches were used in the theoretical analysis in [4]: linearization with respect to the parameter S of the magnetogasdynamic interaction and numerical calculation by the method of characteristics. The first approach was used for weakly perturbed subsonic and supersonic flows and the solutions obtained in analytic form hold only for small S. This is the approach used by Bam-Zelikovich [5] to investigate subsonic and supersonic jet flows through a current loop. The numerical calculations of supersonic flows in a cylindrical pipe in [4] were restricted to comparatively small values of S since, as S increases, shock waves and subsonic waves appear in the flow. Katskova and Chushkin [6] used the method of characteristics to calculate the flow of the type in the supersonic part of an axisymmetric nozzle with a point of inflection. The flow at the entrance to the section of the nozzle under consideration was supersonic and uniform, while the magnetic field was assumed to be constant and parallel to the axis of symmetry. The plane case was also studied in [6]. The solution of the direct problem is the subject of a paper by Brushlinskii, Gerlakh, and Morozov [7], who considered the flow of an electrically conducting gas between two coaxial electrodes of given shape. There was no applied magnetic field, and the induced magnetic field was in the direction perpendicular to the meridional plane. The problem was solved numerically in [7] using a standard process. However, the boundary conditions adopted, which were chosen largely to simplify the calculations, and the accuracy achieved only allowed the authors [7] to make reliable judgments about the qualitative features of the flow. Recently, in addition to [7], several papers have been published [8–10] in which the authors used a similar approach to solve the direct problem in the theory of the Laval nozzle (in the case of a nonconducting gas).Translated from Izvestiya Akademiya Nauk SSSR, Mekhanika Zhidkosti i Gaza., No. 5, pp. 14–20, September–October, 1971.In conclusion the author wishes to thank M. Ya. Ivanov, who kindly made available his program for calculating the flow of a conducting gas, and also A. B. Vatazhin and A. N. Kraiko for useful advice.     

Calculation of unsteady supersonic flow past a two-dimensional cascade of plates ween vorticity inhomogeneities of the flow act on it

In the framework of the linear theory of small perturbations the problem of unsteady subsonic flow past a two-dimensional cascade of plates has been considered in a number of papers. Thus, the unsteady aerodynamic characteristics of a cascade of vibrating plates were calculated in [1] by the method of integral equations, while the same method was used in [2, 3] to calculate the sound fields that are excited when sound waves Coming from outside or vorticity inhomogeneities of the oncoming flow act on the cascade. The problem of a two-dimensional cascade of vibrating plates in a supersonic flow was solved in [4, 5]. In [4] the solution was constructed on the basis of the well-known solution of the problem of vibrations of a single plate, while in [5] a variant of the method of integral equations was used which differed slightly from the usual formulation of this method [1–3]. The approach proposed in [5] is used below to calculate the unsteady flow past a two-dimensional cascade of plates in the case when vorticity inhomogeneities of a supersonic oncoming flow act on it. Equations are obtained for the strength of the unsteady pressure jumps arising in such a flow and the vortex wakes shed from the trailing edges of the plates. Examples of the calculations illustrating the accuracy of the method and its possibilities are given.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp, 152–160, May–June, 1986.     

“Lateral” interaction of a supersonic underexpanded ideal-gas jet with surfaces of different shape

A numerical investigation is made of the interaction of an underexpanded jet of an inviscid and nonheat-conducting gas issuing from an axisymmetric conical nozzle with plane, cylindrical, and spherical surfaces. It is assumed that the flow turning angle for flow about a barrier is smaller than the critical angle, and subsonic regions are absent in the flow field studied. The effect of the characteristic parameters (Mach number at the nozzle exit, jet underexpansion) on the flow pattern and jet forces is analyzed. The results of numerical calculations are compared to the results of approximate theories and experimental data. A theoretical solution of the problem of the effect of a supersonic jet on a surface of given shape, even in the approximation of an inviscid, nonheat-conducting gas, is quite difficult. A reason for this is that the flow region contains shock waves interacting with each other, contact discontinuities, and zones of mixed sub-and supersonic flow. As far as is known to the authors, the results obtained for three-dimensional problems for the interaction of supersonic jets with each other or with barriers are primarily experimental (for example, [1–6]). A numerical analysis of the interaction of axisymmetric ideal-gas jets was carried out in [7–10]. In [7] a three-dimensional form of the method of characteristics was used to calculate the initial interaction region for two supersonic cylindrical jets (with Mach number M=10) intersecting at an angle of 60. The interaction of several jets has been considered in [8, 9], where the solution was obtained according to the Lax—Wendroff method without elimination of the discontinuity lines of flow parameters. In [10] the lateral interaction of axisymmetric supersonic jets with each other and with a plate is investigated by means of a straight-through calculationTranslated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 3–8, November–December, 1974.The authors thank A. N. Kraiko for useful discussions of the results, and A. L. Isakov and É. N. Gasparyan for kindly providing the experimental data.     

Use of direct variational methods to optimize axisymmetric Laval nozzles in the case of equilibrium and nonequilibrium two-phase flows

In the construction of the optimal profile of a Laval nozzle when there are subsonic regions in the flow, the use of effective methods such as the general method of Lagrangian multipliers [1] becomes very difficult. In the present paper, direct variational methods are therefore used. For nozzles, these methods were used for the first time to profile the supersonic parts of nozzles in the case of nonequilibrium two-phase flows by Dritov and Tishin [2]. For equilibrium flows, they have been used to optimize supersonic nozzles [3, 4] and in the construction of a profile of the subsonic part of a nozzle ensuring parallel sonic flow in the minimal section of the nozzle [3].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 181–183, January–February, 1982.I thank A. N. Kraiko for a number of helpful comments in a discussion of the formulation of the problem.     

Experimental Study of Flow in a Cavity on an Axisymmetric Body

The flow past a cylindrical cavity on an axisymmetric body in the range of Mach numbers from 0.6 to 1.18 and the effect of the Mach number in the transition from subsonic to supersonic flow velocities are studied experimentally. In addition, a broad, 5.3—11.3 range of relative elongations of the cavity which permits one to determine the influence of the elongation on flow regimes including flows with closed and open separation zones is studied.     

Calculation of hydrogen-air combustion behind detached shock wave for supersonic flow past a sphere

Many of the published theoretical studies of quasi-one-dimensional flows with combustion have been devoted to combustion in a nozzle, wake, or streamtube behind a normal shock wave [1–6].Recently, considerable interest has developed in the study of two-dimensional problems, specifically, the effective combustion of fuel in a supersonic air stream.In connection with experimental studies of the motion of bodies in combustible gas mixtures using ballistic facilities [7–9], the requirement has arisen for computer calculations of two-dimensional supersonic gas flow past bodies in the presence of combustion.In preceding studies [10–12] the present author has solved the steady-state problem under very simple assumptions concerning the structure of the combustion zone in a detonation wave.In the present paper we obtain a numerical solution of the problem of supersonic hydrogen-air flow past a sphere with account for the nonequilibrium nature of eight chemical reactions. The computations encompass only the subsonic and transonic flow regions.The author thanks G. G. Chernyi for valuable comments during discussion of the article.     

Transverse subsonic flow past a cylinder

At around the critical Reynolds number Re = (1.5–4.0)·10⁵ there is an abrupt change in the pattern of transverse subsonic flow past a circular cylinder, and the drag coefficient C_x decreases sharply [1]. A large body of both experimental and computational investigations has now been made into subsonic flow past a cylinder [1–4]. A significant contribution to a deeper understanding of the phenomenon was made by [4], which gives a physical interpretation of a number of theoretical and experimental results obtained in a wide range of Re. Nevertheless, the complicated nonstationary nature of flow past a cylinder with separation and the occurrence of three-dimensional flows when two-dimensional flow is simulated in wind tunnels do not permit one to regard the problem as fully studied. The aim of the present work was to make additional experimental investigations into transverse subsonic flow past a cylinder and, in particular, to study the possible asymmetric stable flow regimes near the critical Reynolds number.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 154–157, March–April, 1980.     

Passage of a subsonic flow around V-shaped wings

In view of the problems involved in the design of hypersonic aircraft great interest has arisen in recent years as to the behavior of wings in fast supersonic flows. Two main approaches have been used: a study of hypersonic flow around traditional wings, and a search for new configurations with optimum aerodynamic properties. Aerodynamic [1, 2], heat-transfer [3], and stability investigations (for V-shaped wings in super- and hypersonic flows) belong to the latter category. Before attaining supersonic flight the aircraft has to overcome the range of subsonic velocities. In this connection it is important to study flow around V-shaped wings at M < 1. Little research has been devoted to flow around such configurations at subsonic velocities, principal attention having been directed at the study of rapid flow around aircraft configurations with V-shaped wings or tails. The results of analytical and numerical calculations allowing for the interference of transient aerodynamic forces acting on a V-shaped and mutiple-fin tail group in combination with the fuselage were presented in [4, 5]. An experimental study of V-shaped wings as regards the influence of the wing dihedral angle on the aerodynamic characteristics of a model aircraft was presented in [6, 7].Translated from Zhurnal Prikladnoi Mekhaniki i Technicheskoi Fiziki, No. 4, pp. 102–106, July–August, 1975.     

Unsteady three-dimensional viscous shock layer in nonuniform gas flow in the neighborhood of a stagnation point

The combined influence of unsteady effects and free-stream nonuniformity on the variation of the flow structure near the stagnation line and the mechanical and thermal surface loads is investigated within the framework of the thin viscous shock layer model with reference to the example of the motion of blunt bodies at constant velocity through a plane temperature inhomogeneity. The dependence of the friction and heat transfer coefficients on the Reynolds number, the shape of the body and the parameters of the temperature inhomogeneity is analyzed. A number of properties of the flow are established on the basis of numerical solutions obtained over a broad range of variation of the governing parameters. By comparing the solutions obtained in the exact formulation with the calculations made in the quasisteady approximation the region of applicability of the latter is determined. In a number of cases of the motion of a body at supersonic speed in nonuniform media it is necessary to take into account the effect of the nonstationarity of the problem on the flow parameters. In particular, as the results of experiments [1] show, at Strouhal numbers of the order of unity the unsteady effects are important in the problem of the motion of a body through a temperature inhomogeneity. In a number of studies the nonstationary effect associated with supersonic motion in nonuniform media has already been investigated theoretically. In [2] the Euler equations were used, while in [3–5] the equations of a viscous shock layer were used; moreover, whereas in [3–4] the solution was limited to the neighborhood of the stagnation line, in [5] it was obtained for the entire forward surface of a sphere. The effect of free-stream nonuniformity on the structure of the viscous shock layer in steady flow past axisymmetric bodies was studied in [6, 7] and for certain particular cases of three-dimensional flow in [8–11].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 175–180, May–June, 1990.     

Far nonlinear field of a nonlifting airfoil for a generalised equation of transonic flow

The transonic flow equation [1] for plane unsteady irrotational idealgas flows is extended to the case of subsonic, transonic or supersonic flows in a region with an almost constant value of the velocity using orthogonal flow coordinates (family of equipotential lines and streamlines). A solution for the nonlinear far field of steady transonic flow past an airfoil has been obtained for the transonic equation [2]. In this paper it is obtained for a generalized transonic equation and its asymptotic expansion is given. In using difference methods of calculating the flow past an airfoil in the transonic regime a knowledge of the nonlinear field makes it possible to reduce the dimensions of the calculation region (near field) as compared with the region determined by the far field of the linear theory.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 87–91, January–February, 1986.     

Approximate solution of the problem of the bottom zone in a rarefied gas

The problem of the steady-plane monatomic rarefied gas flow around a semiinfinite bar is considered (the plane stationary case of the problem about the bottom zone). The problem is solved numerically at the level of the Krook relaxation model [1, 2]. A depenence of the gas density, velocity, and temperature in the whole flow domain on the space coordinates is obtained for supersonic and subsonic gas streams flowing around a body by using calculations on an M-20 electronic calculator.Khar'kov. Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 139–143, January–February, 1972.     

Optimal lifting surfaces of complicated-geometry wings at supersonic flight velocities

Infinitely thin wings weakly perturbing a supersonic flow of perfect gas are investigated. The flow problem is solved in a linear formulation [1]. The shape of the wing in plan and the Mach number M of the oncoming flow are specified. The optimal wing surface is determined as a result of finding the function of the local angles of attack _M(x, z) which ensures a minimum of the drag coefficient c_x when there are limitations in the form of equalities on the lift coefficient c_y and the pitching moment m_z. A separationless flow regime is realized on the optimal wing for the given number M, and its subsonic leading edge does not experience a load [2].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 154–160, November–December, 1985.     

Experimental investigation of the anomalous aerodynamic heating of bodies with a deep cavity

This paper analyzes the results of experiments using hollow models of different form, located in a steady-state subsonic or supersonic flow at different angles of attack. Concepts of the physical conditions of the appearance of an effect of heating the gas inside the cavity above the stagnation temperature of the oncoming flow are refined.Deceased.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 113–119, January–February, 1978.In conclusion, the authors thank O. Yu. Pivovarov and V. A. Shilov for their aid in carrying out the experiments.     

Numerical investigation of gasdynamic features of control jets

Numerical methods, based on first order difference schemes are used to investigate features of three-dimensional subsonic and supersonic flows of an inviscid non-heat-conducting gas in control jets. Elements of the nozzle channels considered are axisymmetric, and flow symmetry arises from the nonaxial feature of the prenozzle volume and the subsonic part of the nozzle, or because of nonaxiality of elements of the supersonic part. In the first case the nozzle includes an asymmetric subsonic region in which reverse-circulatory flow is observed, and in the second case it includes a region of sudden expansion of the supersonic flow from the asymmetric stagnation zone.Translated from Izvestiya Akademii NaukSSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 126–133, November–December, 1978.The authors thank A. N. Kraiko for useful comments and M. Ya. Ivanov for his interest in this work.