Photoinduced charge property of Ag‐TiO2 films and its relationships with photocatalytic activity under visible illumination

In this article, TiO₂ films were synthesized by traditional spin coating method. To improve their photocatalytic activities, we deposited silver on these films by photodeposition. These films also were characterized by several testing techniques, such as X‐ray diffraction, ultraviolet–visible diffuse reflection spectrum, XPS, Raman spectroscopy (Raman), surface photovoltage spectroscopy, and SEM. The activity of different films was evaluated for degrading rhodamine B solution under visible illumination. The effects of AgNO₃ solution concentration on photoinduced charge property and photocatalytic activity were investigated. The results show that the Ag‐TiO₂ film immersed in 10^?3 mol·L^?1 AgNO₃ solution exhibits higher activity, which is in good agreement with the characterization results. The weaker the surface photovoltage spectroscopy signal, the higher the photocatalytic activity. Moreover, the activity of some films is higher than that of international Degussa P‐25 TiO₂ under visible illumination. Copyright © 2012 John Wiley & Sons, Ltd.     

Tuning the properties of a black TiO2-Ag visible light photocatalyst produced by a rapid one-pot chemical reduction

A highly efficient black TiO₂-Ag photocatalytic nanocomposite, active under both UV and visible light illumination, was synthesized by decorating the surface of 25 nm TiO₂ particles with Ag nanoparticles. The material was obtained via a rapid, one-pot, simple (surfactant and complexing agent free) chemical reduction method using silver nitrate and formaldehyde as a metal salt and reducing agent, respectively. The nanocomposite shows an increase of over 800% in the rate of photocatalytic methylene blue dye degradation, compared to commercial unmodified TiO_2, under UV-VIS illumination. Unlike pure TiO₂, the nanocomposite exhibits visible light activation, with a corresponding drop in optical reflectance from 100% to less than 10%. The photocatalytic properties were shown to be strongly enhanced by post-reduction annealing heat treatments in air, which were observed to decrease, rather than coarsen, silver particle size, and increase particle distribution. This, accompanied by a variation in the silver surface oxidation states, appear to dramatically affect the photocatalytic efficiency under both UV and visible light. This highly active photocatalyst could have wide ranging applications in water and air pollution remediation and solar fuel production.     

Effect of Erbium on the Photocatalytic Activity of TiO2/Ag Nanocomposites under Visible Light Irradiation

Erbium co‐doped TiO₂/Ag catalysts are synthesized by using a simple, one‐step solvothermal method and characterized by X‐ray diffraction, field‐emission scanning electron microscopy, transmission electron microscopy, Raman analysis, X‐ray photoelectron spectroscopy, and diffuse reflectance spectroscopy. The catalysts exhibit anatase crystal structures with increased visible light absorption compared with pure TiO₂. Enhanced photocatalytic activity is observed with Er co‐doped TiO₂/Ag nanocomposites for Rhodamine B degradation under visible light irradiation. The photocatalytic activity of 1 % Er co‐doped TiO₂/Ag is much higher than that of TiO₂/Ag, TiO₂/Er, pure TiO₂, and commercial Degussa P25. The kinetics of the degradation process are studied and the pseudo‐first‐order rate constant (k) and half‐life time (t_1/2) of the reaction are calculated. The enhanced activity might be accredited to the efficient separation of electron–hole pairs by silver and higher visible light absorption of TiO₂ induced by Er.     

Microwave‐Hydrothermal Preparation and Visible‐Light Photoactivity of Plasmonic Photocatalyst Ag‐TiO2 Nanocomposite Hollow Spheres

Visible‐light‐driven plasmonic photocatalyst Ag‐TiO₂ nanocomposite hollow spheres are prepared by a template‐free chemically‐induced self‐transformation strategy under microwave‐hydrothermal conditions, followed by a photochemical reduction process under xenon lamp irradiation. The prepared samples are characterized by using scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, N₂ adsorption‐desorption isotherms, X‐ray photoelectron spectroscopy, UV/Vis and Raman spectroscopy. Production of ?OH radicals on the surface of visible‐light illuminated TiO₂ was detected by using a photoluminescence method with terephthalic acid as the probe molecule. The photocatalytic activity of as‐prepared samples was evaluated by photocatalytic decolorization of Rhodamine B (RhB) aqueous solution at ambient temperature under visible‐light irradiation. The results show that the surface plasmon absorption band of the silver nanoparticles supported on the TiO₂ hollow spheres was red shifted, and a strong surface enhanced Raman scattering effect for the Ag‐TiO₂ nanocomposite sample was observed. The prepared nanocomposite hollow spheres exhibits a highly visible‐light photocatalytic activity for photocatalytic degradation of RhB in water, and their photocatalytic activity is higher than that of pure TiO₂ and commercial Degussa P25 (P25) powders. Especially, the as‐prepared Ag‐TiO₂ nanocomposite hollow spheres at the nominal atomic ratio of silver to titanium ( R ) of 2 showed the highest photocatalytic activity, which exceeds that of P25 by a factor of more than 2.     

Microstructure and hydrogen production activity of Pt–TiO2 prepared by precipitation–photodeposition

A series of Pt–TiO₂ photocatalysts were prepared by a facile precipitation–photoreduction method under different pH conditions, using H₂PtCl₆ as platinum precursor. The microstructure and chemical state of Pt loaded on the surface of TiO₂ were analyzed by X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). It was revealed that the size and distribution of Pt nanoparticles on TiO₂ surface is closely related to the initial pH of H₂PtCl₆ solution. The optimal pH value for forming highly dispersed Pt nanoparticles is 12. The photocatalytic activities of the prepared samples were investigated in terms of hydrogen production. The results indicated that the Pt–TiO₂ sample prepared by precipitation–photodeposition method shows much higher activity than that prepared by traditional photodeposition method.     

火焰辅助热解方法制备Ag2O/TiO2及其光催化制氢性能

以钛酸丁酯和硝酸银为前驱体,采用一步火焰辅助热解法制备了Ag₂O/TiO₂光催化剂并研究了样品在紫外-可见光照射下的光催化制氢性能。利用X射线衍射（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）、X射线光电子能谱（XPS）和紫外-可见漫反射吸收光谱（UV-Vis DRS）对样品进行了表征。XRD结果表明TiO₂均为锐钛矿晶型,Ag的引入对XRD结果无明显影响。SEM图显示未修饰的TiO₂是微球形貌,随着引入Ag含量的增加,微球减少直至消失。通过XPS分析和化学沉淀法表明样品中Ag的存在形式为Ag₂O。UV-Vis DRS测试发现引入Ag后提高了样品的光吸收。前驱体中Ag的量影响样品的光催化活性,最高的光催化制氢的活性可以达到相同条件下的P25的15倍。对光催化反应后的样品进行分析,认为在光催化过程中部分Ag₂O通过光生电子转化为Ag形成Ag/TiO₂,进一步提高光催化制氢活性。     

Silver‐Doped TiO2‐Coated Cotton Fabric as an Effective Photocatalytic System for Dye Decolorization in UV and Visible Light

In this study, titanium tetra‐isopropoxide was used as a precursor of TiO₂ for in situ coating on cotton fabric by sol–gel method. Subsequently, silver nitrate was used as doping agent to prepare silver‐doped TiO₂‐coated cotton fabric during hydrothermal treatment. The treated samples were characterized through field‐emission scanning electron microscopy, energy‐dispersive X‐ray analysis, inductively coupled plasma‐mass spectroscopy and UV–visible absorption spectroscopy to study morphology, composition of deposited elements and light absorption behavior of treated samples. X‐ray photoelectron spectroscopy was carried out to analyze the electronic state of silver in TiO₂‐coated fabric after hydrothermal treatment. Doping of silver on TiO₂‐coated fabric and subsequent hydrothermal treatment was found to enhance dye decolorization rate of rhodamine B dye solution in both UV and visible light radiations with respect to undoped TiO₂. The study shows that an optimal level of silver‐doped TiO₂‐coated fabric can be used repeatedly for dye decolorization without significant loss in its photocatalytic activity. The self‐cleaning properties of samples were also studied using methylene blue as a staining agent. It was observed that the presence of 1.8% silver on the weight of titanium in doped samples provides almost 82% of stain degradation.     

Nanodisperse photocatalysts based on titanium dioxide

A new method for synthesizing amorphous ultradisperse titanium oxide particles immobilized on the surface of SiO₂ aerogel was suggested. TiO₂/SiO₂ systems containing 3–15 wt % TiO₂ were prepared. The chemical composition, structure, and morphology of the surface of the synthesized catalysts were studied by transmission electron microscopy, X-ray diffraction, and IR spectroscopy. The Brunauer-Emmett-Teller method was used to estimate the specific surface area of the samples. The photocatalytic activity of the systems was studied in the model reaction of the decomposition of methylene blue dye. The systems synthesized were found to be more active than TiO₂ Degussa P25.     

火焰辅助热解方法制备Ag_2O/TiO_2及其光催化制氢性能

以钛酸丁酯和硝酸银为前驱体,采用一步火焰辅助热解法制备了Ag_2O/TiO_2光催化剂并研究了样品在紫外-可见光照射下的光催化制氢性能。利用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis DRS)对样品进行了表征。XRD结果表明TiO_2均为锐钛矿晶型,Ag的引入对XRD结果无明显影响。SEM图显示未修饰的TiO_2是微球形貌,随着引入Ag含量的增加,微球减少直至消失。通过XPS分析和化学沉淀法表明样品中Ag的存在形式为Ag_2O。UV-Vis DRS测试发现引入Ag后提高了样品的光吸收。前驱体中Ag的量影响样品的光催化活性,最高的光催化制氢的活性可以达到相同条件下的P25的15倍。对光催化反应后的样品进行分析,认为在光催化过程中部分Ag_2O通过光生电子转化为Ag形成Ag/TiO_2,进一步提高光催化制氢活性。     

Sustainable fabrication of silver-titania nanocomposites using goji berry (Lycium barbarum L.) fruit extract and their photocatalytic and antibacterial applications

Silver-titania nanocomposites (Ag-TiO₂ NCs) have unique functional attributes due to their photocatalytic and antibacterial properties. In this study, titania nanoparticles (TiO₂-NPs) were successfully in-situ decorated with silver nanoparticles (Ag-NPs) using the aqueous extract of goji berries (Lycium barbarum L.) as a bioreducing and stabilizing agent. Different Ag-TiO₂ NCs were synthesized by treating different concentrations of silver nitrate with a specific concentration of TiO₂-NPs in the presence of fruit extract. The green-synthesized NCs were characterized using several techniques viz., ultraviolet–visible spectrophotometry, X-ray diffractometry (XRD), scanning electron microscopy, field-emission transmission electron microscopy (FE-TEM), Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. XRD analysis revealed the formation of face-centered cubic (fcc) crystals, and FE-TEM analysis revealed the embedment of Ag-NPs throughout the surface of TiO₂-NPs. The average size of Ag-NPs on TiO₂-NPs increased from 11.2 ± 3.05 nm to 16.4 ± 4.5 nm with an increase in the concentration of silver ions, and the morphology of Ag-NPs was predominantly quasi-spherical and hexagonal. These NCs exhibited an excellent photocatalytic degradation of an azo dye, methylene blue (MB). The synthesized Ag-TiO₂ NCs (3:1) showed higher photocatalytic degradation efficiency of ∼ 93.4% for MB in 130 min under visible light irradiation. Ag-TiO₂ NC_S also exhibited good antibacterial activities towards Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative). Therefore, the formation of Ag-NPs on the surface of TiO₂-NPs to form Ag-TiO₂ NCs exhibits eco-friendly photocatalytic degradation of azo dye contaminants as well as antibacterial activity.     

Plasmon-resonance-enhanced visible-light photocatalytic activity of Ag quantum dots/TiO2 microspheres for methyl orange degradation

We successfully prepared Ag quantum dots modified TiO₂ microspheres by facile solvothermal and calcination method. The as-prepared Ag quantum dots/TiO₂ microspheres were characterized by scanning electron microscope, transmission electron microscope, X-ray diffraction, X-ray photoelectron spectroscopy and UV-vis diffuse reflectance spectroscopy. The Ag quantum dots/TiO₂ photocatalyst showed excellent visible light absorption and efficient photocatalytic activity for methyl orange degradation. And the sample with the molar ratio of 0.05 (Ag to Ti) showed the best visible light photocatalytic activity for methyl orange degradation, mainly because of the surface plasmon resonance (SPR) effects of Ag quantum dots to generate electron and hole pairs for enhanced visible light photocatalysis. Finally, possible visible light photocatalytic mechanism of Ag quantum dots/TiO₂ microspheres for methyl orange degradation was proposed in detail.     

Preparation of Ag deposited TiO2 (Ag/TiO2) composites and investigation on visible-light photocatalytic degradation activity in magnetic field

In this study, Ag deposited TiO₂ (Ag/TiO₂) composites were prepared by three different methods (Ultraviolet Irradiation Deposition (UID), Vitamin C Reduction (VCR) and Sodium Borohydride Reduction (SBR)) for the visible-light photocatalytic degradation of organic dyes in magnetic field. And then the prepared Ag deposited TiO₂ (Ag/TiO₂) composites were characterized physically by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The visible-light photocatalytic activities of these three kinds of Ag deposited TiO₂ (Ag/TiO₂) composites were examined and compared through the degradation of several organic dyes under visible-light irradiation in magnetic field. In addition, some influence factors such as visible-light irradiation time, organic dye concentration, revolution speed, magnetic field intensity and organic dye kind on the visible-light photocatalytic activity of Ag deposited TiO₂ (Ag/TiO₂) composite were reviewed. The research results showed that the presence of magnetic field significantly enhanced the visible-light photocatalytic activity of Ag deposited TiO₂ (Ag/TiO₂) composites and then contributed to the degradation of organic dyes.     

Photocatalytic degradation of organic compounds by Au-TiO2/sepiolite composites as the highly efficient catalysts

Photocatalytic oxidation of methyl orange (MO) and Congo red (CR) as typical model organic contaminants was investigated in aqueous solution within a cooperating Au/TiO₂/sepiolite heterostructure system under UV light irradiation. The Au/TiO₂/sepiolite composites with a single-crystalline (anatase) framework was synthesized by a facile sol-gel method using titanium tetrachloride as a TiO₂ precursor and depositing metal Au on the surface of TiO₂ nanostructures via a facile chemical reduction process. The crystal structure, surface area, light adsorption and the photoinduced charge separation rate of the photocatalyst prepared were characterized in detail. As compared with the pristine TiO₂, the Au/TiO₂/sepiolite hybrid material exhibited good photocatalytic efficiency (90%) for the UV-light photooxidation of methyl orange, which is four-fold of that of reference TiO₂. In addition, Au/TiO₂/sepiolite hybrid material also shows a good photodegradation performance toward Congo red removal. The highly efficient photocatalytic activity is associated with the strong adsorption ability of sepiolite for aromatic dye molecules, fast photogenerated charge separation due to the formation of Schottky junction between TiO₂ and metallic Au. This work suggests that the combination of the excellent adsorption properties of sepiolite and the efficient separation effect of noble metallic nanoparticles provides a versatile strategy for the synthesis of novel and highly efficient photocatalysts.     

Enzyme mediated synthesis of Ag–TiO2 photocatalyst for visible light degradation of reactive dye from aqueous solution

The purpose of this study was to develop bio-inspired photocatalyst with solar light activity for textile dye degradation. Three TiO₂ samples namely TiO₂ (TiO₂-A), biotemplated TiO₂ (TiO₂-B), and enzyme mediated Ag–TiO₂ biotemplate (TiO₂-C), were developed. The presence of anatase phase of TiO₂ and silver in synthesized samples were confirmed using X-ray diffraction, field emission scanning electron microscopy, energy-dispersive spectroscopy, and UV–Vis–NIR spectroscopy. Photocatalytic efficiencies of these photocatalysts were evaluated by studying the oxidation of a commercial reactive dye (reactive black) under solar light irradiation in batch reactors. Photocatalytic efficiencies of the sample were compared using statistical tools like one-way ANOVA and Tukey test. The results confirmed that photocatalytic efficiency of TiO₂-C was 40 % higher than that of TiO₂-A under solar light irradiation.     

Evaluation of the plasmonic effect of Au and Ag on Ti-based photocatalysts in the reduction of CO_2 to CH_4

Crystalline TiO_2(P25) and isolated titanate species in a ZSM-5 structure(TS-1) were modified with Au and Ag, respectively, and tested in the gas-phase photocatalytic CO_2 reduction under high purity conditions. The noble metal modification was performed by photodeposition. Light absorbance properties of the catalysts are examined with UV–Vis spectroscopy before and after the activity test. In the gas-phase photocatalytic CO_2 reduction, it was observed that the catalysts with Ag nanostructures are more active than those with Au nanostructures. It is thus found that the energetic difference between the band gap energy of the semiconductor and the position of the plasmon is influencing the photocatalytic activity.Potentially, plasmon excitation due to visible light absorption results in plasmon resonance energy, which affects the excitation of the semiconductor positively. Therefore, an overlap between band gap energy of the semiconductor and metal plasmon is needed.     

Novel preparation method of nanosilver doped sol gel TiO2 photocatalysts for dye pollutant degradation

In the present study, a novel method for the silver nanoparticle incorporation into TiO₂ sol is reported which provides efficient dispersion of inserted metal in the calcined gel. Glucose mediated metal nanoparticle synthesis eliminates the additional steps for the introduction of dopant over the support. Ag nanoparticle acts as competent trapping centers preventing the recombination of electron?Chole pairs. Thus, in spite of the low UV intensity present in the sunlight, considerable enhancement in the catalytic efficiency was observed for the degradation of dye pollutants over nanosilver loaded TiO₂. Transmission electron microscopic images display the well isolated nanoparticles of silver having uniform dimensions of less than 5?nm over the best system, 2?wt% nanosilver loaded TiO₂, which is accountable for its effectiveness as a photocatalyst. Anatase is found to be the photocatalytic active phase, as evident from the X-ray diffraction studies.     

Photocatalytic degradation of acid blue 74 in water using Ag–Ag2O–Zno nanostuctures anchored on graphene oxide

Water pollution due to industrial effluents from industries which utilize dyes in the manufacturing of their products has serious implications on aquatic lives and the general environment. Thus, there is need for the removal of dyes from wastewater before being discharged into the environment. In this study, a nanocomposite consisting of silver, silver oxide (Ag₂O), zinc oxide (ZnO) and graphene oxide (GO) was synthesized, characterized and photocatalytically applied in the degradation (and possibly mineralization) of organic pollutants in water treatment process. The Ag–Ag₂O–ZnO nanostructure was synthesized by a co-precipitation method and calcined at 400 °C. It was functionalized using 3-aminopropyl triethoxysilane and further anchored on carboxylated graphene oxide via the formation of an amide bond to give the Ag–Ag₂O–ZnO/GO nanocomposite. The prepared nanocomposite was characterized by UV–Vis diffuse reflectance spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electronic microscopy (SEM), energy dispersive X-ray spectrometry (EDX), Fourier transformed infrared spectroscopy (FTIR), and Raman spectroscopy. The applicability of Ag–Ag₂O–ZnO/GO nanocomposite as a photocatalyst was investigated in the photocatalytic degradation of acid blue 74 dye under visible light irradiation in synthetic wastewater containing the dye. The results indicated that Ag–Ag₂O–ZnO/GO nanocomposite has a higher photocatalytic activity (90% removal) compared to Ag–Ag₂O–ZnO (85% removal) and ZnO (75% removal) respectively and thus lends itself to application in water treatment, where the removal of organics is very important.     

Silver embedded C-TiO2 exhibits improved photocatalytic properties with potential application in waste water treatment

Non-metal element doping on photocatalysts demonstrates a wide range of disadvantages. Hence metal embedding on nanomaterials is considered to enhance photocatalytic efficiency. In this study, we employed silver nano particle embedding on C-TiO₂ photocatalyst to improve its phtotocatytic degradation efficiency of organic water pollutant such as methyl orange. Modified sol-gel methods based on self-assembly technique was used to prepare the nanoformulations. The synthesized nanoparticles were characterized by X-Ray diffraction (XRD), Fourier transforms infrared (FT-IR), Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), UV–vis diffuse reflectance spectroscopy, and photoluminescence spectra (PL). Compared to non-silver formulation (C-TiO₂), silver embedded nanomaterial (C-TiO₂/Ag) displayed an increased shift in the light absorption towards visible spectrum. A low photoluminescence (PL) intensity by 1 wt% C-TiO₂/Ag indicated improved photocatalytic efficiency. Further, higher degradation of organic dye methyl orange confirmed that 1 wt% C-TiO₂/Ag exhibited the best photodegradation rate over its non Ag embedded C-TiO₂. Embedding of silver on C-TiO₂ extends optical absorption edge of C-TiO₂ to more visible spectrum and inhibits electron-hole recombination resulting in enhanced photocatalytic activity. Photocatalytic degradation on methyl orange organic pollutant was considerably improved indicating its potential use in water treatment applications.     

Effect of Cl− anions on photocatalytic decomposition of gaseous ozone over Au @ Ag/TiO2 catalyst

Au core Ag shell composite structure nanoparticles were prepared using a sol method. The Au core Ag shell composite nanoparticles were loaded on TiO₂ nanoparticles as support using a modified powder–sol method, enabling the generation of Au @ Ag/TiO₂ photocatalysts for photocatalytic decomposition and elimination of ozone. The sols were characterized by means of ultraviolet–visible light (UV–Vis) reflection spectrometry, X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). The activity of the Au @ Ag/TiO₂ photocatalysts for photocatalytic decomposition and elimination of ozone was evaluated and the effect of Cl^? anions on the photocatalytic activity of the catalysts was highlighted. Results showed that Au @ Ag/TiO₂ prepared via the modified powder–sol route in the presence of an appropriate amount of NaCl solid as demulsifier had better activity in the photocatalytic decomposition and elimination of ozone. At the same time, Au @ Ag/TiO₂ catalysts had better ability to resist poisonous Cl^? anions than conventional Au/TiO₂ catalyst. The reasons could be, first, that NaCl was capable of reducing the concentration of free Ag⁺ by adsorption on the surface of Ag particles forming AgCl and enhancing the formation of Au core Ag shell particles, leading to a better resistance to Cl^? anions of the catalysts, and, second, AgCl took part in the photocatalytic decomposition of ozone together with Au @ Ag/TiO₂ catalysts and had a synergistic effect on the latter, resulting in better photocatalytic activity of Au @ Ag/TiO₂ catalysts.     

One-dimensional porous Ag/AgBr/TiO<Subscript>2</Subscript> nanofibres with enhanced visible light photocatalytic activity

One-dimensional (1D) Ag/AgBr/TiO₂ nanofibres (NFs) have been successfully fabricated by the one-pot electrospinning method. In comparison with bare TiO₂ NFs and Ag/AgBr/PVP (polyvinylpyrrolidone) NFs, the 1D Ag/AgBr/TiO₂ NFs photocatalyst exhibits much higher photocatalytic activity in the degradation of a commonly used dye, methylene blue (MB), under visible light. The photocatalytic removal efficiency of MB over Ag/AgBr/TiO₂ NFs achieves almost 100 % in 20 min. The photocatalytic reaction follows the first-order kinetics and the rate constant (k) for the degradation of MB by Ag/AgBr/TiO₂ NFs is 5.2 times and 6.6 times that of Ag/AgBr/PVP NFs and TiO₂ NFs, respectively. The enhanced photocatalytic activity is ascribed to the stronger visible light absorption, more effective separation of photogenerated electron-hole pairs, and faster charge transfer in the long nanofibrous structure. The Ag/AgBr/TiO₂ NFs maintain a highly stable photocatalytic activity due to its good structural stability and the self-stability system of Ag/AgBr. The mechanisms for photocatalysis associated with Ag/AgBr/TiO₂ NFs are proposed. The degradation of MB in the presence of scavengers reveals that h⁺ and ^?O ₂ ^? significantly contribute to the degradation of MB.