Changes in the surface properties and stability of biocolloids of a sludge system upon extraction of heavy metals

The influence of chemical and biological extraction of heavy metals on the stability of natural sludge sol, as well as on the wetting and electrosurface properties of its particles, is studied. The biological extraction of metals is found to result in hydrophobization of sludge colloids and reduce their negative charge. Heavy metal extraction destabilizes the sludge sol, the level of destabilization being maximum upon bioleaching. The presence of exopolysaccharides considerably stabilizes the sludge system; however, it weakly affects the system’s stability after extraction of heavy metals.     

Possibilities for the harmonization of methods of the dynamic fractionation of elements in soils and bottom sediments

The paper presents the first comparative study of the fractionation of heavy metals, arsenic, antimony, and selenium in soils, sludge and bottom sediments using two systems for dynamic extraction, rotating coiled columns (RCC) and cylindrical microcolumns (MC). It has been revealed that the results of the fractionation of the forms of elements are related with the physicochemical properties of soils, sludge, and bottom sediments and the special features of mixing the sample and eluent in RCC and MC. In particular, it has been demonstrated that, as compared to MC, RCC provides more efficient recovery of the most mobile (ecologically relevant) forms of arsenic, antimony, and selenium from samples rich with organic matter. However, in the majority of cases, despite the different efficiency of the recovery of individual fractions, RCC and MC provide comparable diagrams of the distribution of the extracted forms of elements. The influence of the rate of the eluent flow on the processes of the dynamic extraction of heavy metals, arsenic and antimony in RCC and MC has been estimated. The directions of research for the further harmonization of the methods of dynamic fractionation of forms of elements in soils, sludge, and bottom sediments with different physicochemical mobilities and potential biological availabilities are outlined.     

Assessment of the health of a river ecosystem due to the impact of pollution from industrial discharge using instrumental neutron activation analysis and inductively coupled plasma-mass spectrometry

Inductively coupled plasma-mass spectrometry (ICP-MS) and neutron activation analysis (NAA) were employed in the determination of heavy metal concentrations in water, plant and sediment samples to assess the extent of heavy metal pollution in a river system which is located within an industrial zone. Elemental concentrations of As, Pb, Hg, Cr, Cu, Cd, Ni and Zn were measured in the samples. Statistical analysis was performed on the data obtained to look for trends in the pollution pattern of these elements on the river system. The trend in concentrations of heavy metals pollution in water samples is in the order of Zn > Cu > Ni > Cr > As > Pb > Hg > Cd, whereas in plants the order is Zn > Cr > Cu > Pb > Ni > As > Hg > Cd and in sediments Zn > Cu > Pb > Ni > As > Hg.     

A Comparison of Conventional and Ultrasound-Assisted BCR Sequential Extraction Methods for the Fractionation of Heavy Metals in Sewage Sludge of Different Characteristics

The purpose of this study was to determine the heavy metal (HM: Cd, Cr, Cu, Ni, Pb, Zn, and Hg) content in particular chemical fractions (forms) of sewage sludge with different characteristics (primary and dewatered sludge) using conventional (CSE) and ultrasound-assisted (USE) BCR sequential extraction methods (Community Bureau of Reference, now the Standards, Measurements and Testing Programme). The concentrations of HMs were determined using inductively coupled plasma optical spectrometry (ICP-OES). Only mercury was assayed with cold vapor atomic absorption spectrometry (CVAAS). Ultrasound treatment was conducted in the ultrasonic bath (Sonic 5, Polsonic). The optimal sonication time (30 min) was determined using ERM-CC144 (Joint Research Center; JCR) certified reference material. The conducted experiment revealed that the use of ultrasound waves shortened the extraction time to 4 h and 30 min (Stages I to III). The recoveries (R_M) of heavy metals ranged from 62.8% to 130.2% (CSE) and from 79.8% to 135.7% (USE) for primary sludge, and from 87.2% to 113.2% (CSE) and from 87.8% to 112.0% (USE) for dewatered sludge. The only exception was Hg in dewatered sludge. The conducted research revealed minor differences in the concentrations and fractionation patterns for Cd, Ni, and Zn extracted from sludge samples by the tested methods. However, it was confirmed that the above findings do not significantly affect the results of a potential ecological risk assessment (with minor exceptions for Cd and Zn in the primary sludge), which is extremely essential for the natural use of sludge, and especially dewatered sludge (the final sludge). The shorter extraction time and lower energy consumption prove that ultrasound-assisted extraction is a fast and simple method for HM fractionation, and that it provides an alternative to the conventional procedure. Therefore, it can be considered a “green method” for the assessment of the bioavailability and mobility of heavy metals in solid samples.     

Screening of dissolved heavy metals (Cu,Zn, Mn,Al, Cd,Ni, Pb) in seawater by a liquid-membrane–ICP–MS approach

A bulk liquid membrane system has been developed and applied to the simultaneous separation and preconcentration of up to seven heavy metals (copper, zinc, lead, cadmium, aluminium, manganese, and nickel) in seawater. Copper was selected to optimize transport conditions and then, under these conditions, the simultaneous extraction of other heavy metals was studied. The system achieved preconcentration yields ranging between 44.11% (Cd) and 77.77% (Cu) after nine hours of operation, the effectiveness of metal transport being Cu > Zn > Pb > Mn > Ni > Al > Cd. The system was applied to the preconcentration of four real seawater samples before their quantification by inductively coupled plasma–mass spectrometry (ICP–MS). Compared with the analytical procedures commonly used for trace metal determination in oceanography, the results obtained demonstrated that the new system may be used as a very clean (sample contamination-free), simple, and one-step alternative for semiquantitative, and even quantitative, simultaneous determination of heavy metals in seawater.     

Combining multivariate analysis and geochemical approaches for assessing heavy metal level in sediments from Sudanese harbors along the Red Sea coast

Multivariate statistical analysis and geochemical approaches were exploited for the assessment of the level of some heavy metals (Mn, Fe, Ni, Cu, Zn and Pb) in sediments from Sudanese harbors along the Red Sea coast. Principal component analysis, as a multivariate statistical analysis approach, was applied to identify contribution sources by heavy metals in sediments. While a single source (crustal) was recorded in the bulk sediments and coarse sediment grains (grain-size 1000-500 µm), two sources (crustal and anthropogenic) were recorded in fine sediment grains (grain-size < 500 µm). Furthermore, enrichment factor (EF), as a geochemical approach, appointed polluted sites by heavy metals in the study area. Based upon a previous study addressed the interpretation of EF values, minor to moderate anthropogenic enrichment were recorded in sediments from some sites in the study area. The main anthropogenic activities that believed to be the major sources of pollution by heavy metals in the study area are discharges from oil refinery, industry, shipping activity and domestic waste. Hierarchical cluster analysis (HCA), as another multivariate statistical analysis approach, was applied for the concentrations of heavy metals in bulk sediments to group sediments according to their mineralogical composition. The output of HCA is that sediments from the Port-Sudan harbor can be divided mainly into three areas — east, west and south. For the Sawakin harbor, no apparent trend for the spatial distribution of heavy metals in sediments was recorded.     

Analysis of heavy metals in road-deposited sediments

Road-deposited sediments were analysed for heavy metal concentrations at three different landuses (residential, industrial, commercial) in Queensland State, Australia. The sediments were collected using a domestic vacuum cleaner which was proven to be highly efficient in collecting sub-micron particles. Five particle sizes were analysed separately for eight heavy metal elements (Zn, Fe, Pb, Cd, Cu, Cr, Al and Mn). At all sites, the maximum concentration of the heavy metals occurred in the 0.45-75 μm particle size range, which conventional street cleaning services do not remove efficiently. Multicriteria decision making methods (MCDM), PROMETHEE and GAIA, were employed in the data analysis. PROMETHEE, a non-parametric ranking analysis procedure, was used to rank the metal contents of the sediments sampled at each site. The most polluted site and particle size range were the industrial site and the 0.45-75 μm range, respectively. Although the industrial site displayed the highest metal concentrations, the highest heavy metal loading coincided with the highest sediment load, which occurred at the commercial site. GAIA, a special form of principal component analysis, was applied to determine correlations between the heavy metals and particle size ranges and also to assess possible correlation with total organic carbon (TOC). The GAIA-planes revealed that irrespective of the site, most of the heavy metals are adsorbed to sediments below 150 μm. A weak correlation was found between Zn, Mn and TOC at the commercial site. This could lead to higher bioavailability of these metals through complexation reactions with the organic species in the sediments.     

Determination of alkylphenols and alkylphenol ethoxylates in sewage sludge: effect of sample pre-treatment

A complete characterization of sewage sludge collected from five biological waste water treatment plants was done to determine physico-chemical parameters, heavy metals and alkylphenols, making special emphasis on sampling, homogenization, and sample pre-treatment. Ultrasonic extraction followed by gas chromatrography coupled with mass spectrometry was used to evaluate the effect of sample pre-treatment (untreated sample, freeze-drying, drying at 40 °C or drying at 100 °C) on the concentration of octylphenol (OP), nonylphenol (NP) and nonylphenol ethoxylates (NP₁EO, NP₂EO). Untreated samples and samples dried at 100 oC gave concentration levels up to 62% and 89% lower, respectively, than freeze-dried samples. In 50% of cases, freeze-dried samples led to significantly higher concentrations than those obtained by drying at 40 °C. Thus, freeze-drying is the recommended sample pre-treatment to prevent possible losses of OP, NP, and NP₁EO. Using this methodology, concentrations detected were from 3.2 to 199 mg kg⁻¹ being NP followed by NP₁EO found in highest concentration. The total concentration of NP and NP₁EO exceeded the limit of 50 mg kg⁻¹ proposed by the draft European directive on sewage sludge in three out of five samples studied. Contrarily, heavy metals were below the legislated values.     

Trace Metal Speciation and Research in Marine Geochemistry

Abstract

In order to precise the origin and behaviour of trace metals associated with coastal marine sediments, marine geochemists frequently utilize various methods of sequential extraction. The main objective is to test the potential mobility / stability of particulate metals in the natural environments. Several examples are presented in the article, namely: i/ Exchangeable Pb from podzolic soils of the drainage basin of a lagoon which sediments and phreatic waters are for a large part inherited from the surrounding soils; ii/ Evolution of particulate metals in an estuary; iii/ Mobility of metals at the sea bottom interface; iv/ Role of amorphous components of estuarine sediments and suspended matter; v/ Effects of dredging activities on solubility of metals in an estuary; vi/ Behaviour of heavy metals in lagoons.

Main results obtained from the extraction procedures are described, as well as particular difficulties encountered when applying some classical methods.     

Application of Leaching Tests for the Assessment of Available Heavy Metals from Domestic and Industrial Sludges

Various sludge samples from different domestic and industrial wastewater treatment plants were analyzed by Flame Atomic Absorption Spectrometry to evaluate their total and available contents of heavy metals (Cu, Cr, Ni, Pb, Zn and Fe). The EDTA and acetic acid single extraction procedures were applied to these samples with the aim to study the leaching behaviour of the metals in the different sludges and also to predict their possible mobility when these wastes are disposed on the environment and landfills. In acidic medium, a higher extraction efficiency was observed for the major part of the elements studied in the industrial sludges, except for Ni and Zn, which were also considerably released from domestic sludges. In contrast, in the presence of the EDTA complexing ligand, a more elevated mobility of metals was found in the domestic sludges and little or no metals were released from the industrial sludges. Moreover, the results of the microwave total digestions were compared, for all metals, with those obtained using a more simplified pseudototal digestion procedure (based on the EPA Method 3051, named microwave assisted acid digestion of sediments, sludges, soils and oils) and a good agreement was found between them, except for Cr and Ni in some particular samples. The between-batch precision (expressed as RSD) of both compared digestion methods was very similar and values lower than 7.7% were obtained in both cases. A certified domestic sludge material (SRM 2781) was employed to validate the two digestion procedures and no significant differences were found between the certified and experimental values for all the elements studied.     

Investigation of heavy metals mobility in shrimp aquaculture sludge—Comparison of two sequential extraction procedures

Influence of heavy metals was investigated by conducting various tests on the samples collected from aquaculture shrimp in Selangor, Malaysia. The concentration of heavy metals in the sludge and potential of mobility based on its association forms was studied. Two sequential extraction methods (five stages Tessier method and three steps BCR method) were used to determine the binding forms of the metals.From the analysis, Ca, Fe and Mn were found to be highest concentrated metals compared to Zn, Cu, Cr, Cd and Pb in aquaculture shrimp sludge. From the sequential extraction, Cd, Mn and Pb were mostly found in exchangeable/carbonate form, showed its susceptibility to be leached easily. Also Cu and Zn were extracted predominantly in oxidizable form. All metal concentrations (except Cd, Zn and Cu) were extracted to be higher in residual fraction in this method. The results of BCR method are totally similar to the five stages Tessier method. By comparing the percent of recovery, the BCR method was better than Tessier method. Nevertheless for both methods the percent of their recoveries were acceptable. For Pseudototal metal digestion, although the concentration of Cd is less than other heavy metals, it is very harmful as a fertilizer because Cd is one of the heavy metals that might be in the leaf or fruit of plants. Also for investigation of Ca in the sludge, this element was measured and high amounts of that show sludge is useful for growing of plant. The results of direct digestion of heavy metals show that with the control of Cd in this sludge we can use this sludge as fertilizer in soils for agriculture but it is better if it is used for fruitless plants.     

The sequential analytical procedure as a tool for evaluation of As, Cd and Zn mobility in soil

The BCR EUR 14763 EN sequential extraction method, developed for the analysis of heavy metals in sediments, was applied to 35 soil samples covering the area of the Czech Republic. The soils varied in their physical-chemical properties and total element contents. While the residual fraction in the case of cadmium was only 18% of total Cd, for Zn and As the residual fraction was dominant (55 and 75%, respectively). The decreasing concentrations of extractable elements in the order Cd > Zn > As correspond to their availability in plants. The influence of selected soil properties (pH, sorption capacity, organic matter, and clay-silt-sand content) on the distribution of As, Cd and Zn was evaluated. Received: 3 August 1998 / Revised: 18 November 1998 / Accepted: 20 November 1998     

Evaluation of heavy metal bioavailability in soil amended with poultry manure using single and BCR sequential extractions

In the present study, three-step Community Bureau of Reference sequential extraction scheme (BCR-SES) and single extraction methods were performed to assess the mobility and availability of heavy metals (Cd, Cu, Pb, Fe and Zn) in an agricultural soil before and after amendment with poultry waste (PW).The PW samples were collected from poultry farms, situated in Hyderabad Sindh, Pakistan. The extractable heavy metals were measured by flame and electrothermal atomic absorption spectrometry. The validation of the method was carried out by analysis of a certified reference material of soil amended with sewage sludge (BCR-483). The single extractions using calcium chloride and EDTA, separately, while BCR-SESs were developed to evaluate the available heavy metals to plants and their environmental accessibility for control soil (CS), PW and soil amended with PW (SPW).The pH of the PW and SPW were found to be < 6.0, which may enhance the leaching of heavy metals to agricultural soil. The results from the partitioning study indicated that easily mobilised forms (acid exchangeable) of Cd were higher than other heavy metals. The oxidisable fractions of all heavy metals were dominant in PW and SPW as compared to found in CS samples. The EDTA- and CaCl₂-extractable heavy metals correspond to 5.0 to 10 and 0.5 to 3.0%, respectively of total contents in all three solid samples. Contamination factors revealed that the retention of Pb and Zn were higher compared with Cu, Cd and Fe in CS, PW and SPW samples.     

Waste-activated sludge (WAS) as Cr(III) sorbent biosolid from wastewater effluent

A biological sludge – waste-activated sludge (WAS) – from a dairy filtering station was investigated for the removal of trivalent chromium from aqueous solution. Kinetic results revealed that chromium adsorption was instantaneous. The removal rate increases up to pH 4 for contact times beyond 20 min. The equilibrium state is attained in 30 min in all the considered systems. The reaction orders as well as the diffusion rate constant were determined. Values adsorption isotherms measured at pH 3 generally followed the Langmuir model. The maximum uptake capacity was 25.64 mg/g. Values of thermodynamic parameters show that chromium (III) sorption on WAS is an exothermic process.This study provides an opportunity for the removal of heavy metals such as chromium from aqueous solutions using a low-cost biosolid as adsorbent support.     

Speciation of Heavy Metals in Sewage Sludge and Sludge-Amended Soil

Abstract

The presence of heavy metals in sewage sludge restricts their agricultural use. Sequential extraction procedures may provide an assessment of the mobility of these elements in sludge and sludge-amended soil, and may help to predict the release of metals in soil solution. Nevertheless, the “phases” in which an element occurs are operationally defined and it is necessary to standardize a procedure in order to allow the comparison of result from different laboratories.     

On the Possibility of Recovery of Heavy Metals from Excess Activated Sludge at 6-37°C

A method for recovery of heavy metals (Fe, Zn, Cu, Cr, Ni, Pb, Co) from excess activated sludge is proposed, based on substitution of heavy metals in the cells of microorganisms by calcium after introducing poorly soluble calcium salts into the system at 6-37°C.     

氧化与还原条件下伊通河长春区段沉积物重金属形态特征的对比研究

利用改进的Tessier连续萃取法研究了伊通河长春市自由大桥处不同深度沉积物样品在氧化及还原条件下Cu,Pb,Zn和Ni的形态变化规律,同时分析了沉积物样品中酸可挥发性硫(Acid volatile sulfide,AVS)和同时提取重金属(Simultaneous extract metals,SEM)的含量. 实验结果表明，样品经干燥、研磨处理后,Cu有机/硫化物结合态比例减少40%,锰氧化物结合态的比例显著增加; Pb,Zn和Ni 3种元素有机/硫化物结合态比例均略有下降,变化幅度小于Cu,并重新分配到不同的化学相中. 通过SEM中各金属含量与有机/硫化物结合态中金属含量的对比可知,还原性沉积物中Cu除了与硫化物结合外,很大一部分是以有机物形态存在的,Pb,Zn,Ni,Fe和Mn则主要以硫化物形态存在,各元素形态分析均不同程度地受到萃取剂的影响.     

缺氧沉积物中重金属形态连续萃取方法的稳定性研究

考察了海水养殖区域缺氧沉积物中重金属形态连续萃取法萃取过程中溶液pH值、温度变化和胶体形成对形态分离结果的影响。结果表明,连续萃取法Step1萃取酸溶态时,萃取液pH值的轻微升高使Pb和Zn的萃取结果明显降低;Step2萃取还原态时,萃取液pH值明显升高对重金属的萃取结果影响很小;Step3萃取有机质结合态时,萃取液pH值的降低对重金属萃取结果影响较小(除Pb外)。由于连续萃取法中各步萃取反应的热力学过程不同,Step1和Step2萃取后溶液温度轻微升高而在Step3中溶液温度稍微降低,溶液温度变化(<2.5℃)对重金属形态的影响很小。在Step1、Step2和Step4萃取过程中胶体的形成和存在,对萃取液Cd、Zn和Cu有明显的吸附影响;而在Step3萃取中萃取剂的分散作用有效控制了溶液中胶体的形成。因此采用连续萃取方法评价沉积物中的重金属形态时,控制萃取液pH值和胶体形成有利于提高萃取结果的稳定性和准确性。     

Desorption of Heavy Metals from Typical Soil Components (Clay,Peat) with Glycine

Abstract

Natural organic chelating agents take part in the mobilization and translocation of heavy metals in unpolluted and polluted soils. They also have to be considered as possible extracting agents for the decontamination of heavy metal polluted soils. For an assessment of the desorption capability of glycinc, heavy metals (Cd, Cu, Ni, Pb, Zn) were adsorbed onto typical soil components (bentonite and peat). The metal loaded sorbents were resuspended in aqueous solutions of glycine at pH 7.0 and 4.5 and the quantities of the desorbed metals were analysed in the liquid phase. Furthermore, the dependency of the desorption rate on the duration of experiments and the metal content were investigated. The remobilization of heavy metals from bentonite by glycine at pH 7.0 decreases following the order Cu > Ni > Zn > Cd > Pb and ranges from 95% to 9.5%. The desorption rate was significantly lower at pH 4.5 and in suspensions of peat.     

火焰原子吸收光谱法分析沉积物中重金属元素的形态

采用原子吸收光谱法研究了金沙江攀枝花段水系沉积物中重金属的形态及分布特征。研究发现,各重金属的形态以残渣态为主,离子交换态含量很少。同时说明原子吸收光谱法完全可以用来研究重金属形态特征,在环境研究中具有重要意义。