Bichromophoric naphthalene derivatives of diethylenetriaminepentaacetate (DTPA): fluorescent response to H+, Ca2+, Zn2+, and Cd2+

As an effort to design selective fluorescent sensors toward Ca²⁺, Zn²⁺ and Cd²⁺, synthetic and fluorometric studies were performed on four bichromophores, each of which consists of two naphthyl or methynaphthyl units (1- and 2-isomers) linked with a diethylenetriaminepentaacetate (DTPA) chain. Every bichromophore exhibits naphthalene-monomer emission at 370 nm and excimer emission at 405 nm. Emission intensities show sensitive pH dependence, from which protonation constants were determined. Fluorometric titrations with the metal ions were performed at the physiological pH and the conditional formation constants were determined. Naphthyl rings define the stoichiometry and stability of the complexes. The insertion of CH₂ spacer intensifies the emission and enhances the selective response to metal ions: the excimer emission is strengthened by 70?100 % with Cd²⁺ coordination, weakened by 60 % with Zn²⁺, and insensitive to Ca²⁺. The high response of methylnaphthyl bichromophores to Cd²⁺ is advantageous in fluorometric analyses.     

Novel nanostructured dendrimer based on 1,3-bis(4,6-dichloro-1,3,5-triazine-2-yl)urea as an excellent adsorbent for Pb2+, Ni2+, Co2+ and Zn2+ metal ions

Human health is seriously harmed by the consumption of poor-quality water. Due to high toxicity and water solubility, heavy metals are present in wastewater discharged from numerous industries. In the environmental realm, metal-containing water must be treated before being released. A dendrimer is a superior adsorbent for the removal of heavy metal ions due to its nanostructure and hydrophilic end group. In this work, a novel triazine-based hydroxy-terminated dendrimer up to generation three is designed employing a carbamide core. The dendrimer's structure was explored using FT-IR and ¹H NMR studies. Full generation dendrimers UG1.0, UG2.0, and UG3.0 were utilized as an adsorbent for Pb²⁺, Ni²⁺, Co²⁺ and Zn²⁺ metal ion removal from water in a series of tests. The ability of dendrimers to uptake Pb²⁺, Ni²⁺, Co²⁺ and Zn²⁺ metal ions was investigated under various pH, time interval and dendrimer generation parameters. The presence of metal in the dendrimer was confirmed by FT-IR studies of dendrimer-metal complexes. The overall results show that Pb²⁺, Ni²⁺, Co²⁺ and Zn²⁺ metal ions uptake increases with the generation, time, and pH.     

Purification of waste waters containing 60Co2+, 115mCd2+ and 203Hg2+ radioactive ions by ETS-4 titanosilicate

Summary The sorption of ⁶⁰Co²⁺, ^115mCd²⁺ and ²⁰³Hg²⁺ from diluted solutions (as analogues for radioactive waste waters) on ETS-4 microporous titanosilicate was studied at 277, 293, 313 and 333 K by measuring the sorption kinetics using a batch-method. The sorption of these radiocations was compared by means of the distribution coefficient and of the sorption capacity. The maximum sorption capacities follow the order: ²⁰³Hg²⁺>^115mCd²⁺3⁶⁰Co²⁺. The thermodynamic functions of the sorption processes have been estimated. The increase of the absolute value of DG° with increasing temperatures shows that higher temperatures favor ionic exchange.     

Sorption of plutonium from low level liquid waste using nano MnO2

Nano-crystalline MnO₂ has been synthesized by the method of alcoholic hydrolysis of KMnO₄ and its potential as a sorbent for plutonium present in the low level liquid waste (LLW) solutions was investigated. The kinetic studies on the sorption of Pu by MnO₂ reveal the attainment of equilibrium sorption in 15 h, however 90 % of sorption could be achieved within an hour. In the studies on optimization of the solution conditions for sorption, it was observed that the sorption increases with the pH of the aqueous solution, attains the maximum value of 100 % at pH = 3 and remains constant thereafter. The sorption was found to be nearly independent of the ionic strength (0.01–1.0 M) of the aqueous solutions maintained using NaClO₄, indicating the inner sphere complexation between the Pu⁴⁺ ions and the surface sites on MnO₂. Interference studies with different fission products, viz., Cs⁺, Sr²⁺ and Nd³⁺, revealed decrease in the percentage sorption with increasing pH of the suspension indicating the competition between the metal ions. However, at the metal ion concentrations prevalent in the low level liquid waste solutions, the decrease in the Pu sorption was only marginally decreased to 90 % at pH = 3, the decrease being more in the case of Nd³⁺ than that in the case of Cs⁺. This study, therefore, shows nano-crystalline MnO₂ can be used as a sorbent for separation of Pu from LLW solutions.     

Agricultural biomasses as sorbents of some trace metals

The studies of sorption of six metal ions (Cd²⁺, Cu²⁺, Pb²⁺, Zn²⁺, Ni²⁺, Cr³⁺ and Cr(VI)) from by-products of agriculture are taken into account. The Langmuir q_max values obtained with the use of different biomasses are evaluated and, in order to acquire comparable results, the necessity of using molar concentrations is stressed. The main effects of pH on sorption are estimated by considering both the behaviour of metal ions (hydrolysis and hydroxide precipitation) and the effect of pH on coordination, using a simulated example. Some considerations are made on the information that can be obtained using the most common isotherms and on the need to use chemical dimensions rather than weight in order to make comparison among various metal ions (since atomic weight differences deeply alter the significance of parameters in non-chemical units) and to predict the effects of competition between two (or more) of these for the same sorbent sites on the biomass surface.     

Studies on Synthetic Inorganic Ion Exchangers-III Quantitative Separations of Mg2+ -Pb2+, Zn2+ - Pb2+ Cu2+ - Pb2+, Al3+ - Pb2+, Zn2+ - Cd2+, and Mg2+ - Cd2+ on Lead Antimonate Columns

Abstract

A new inorganic ion exchanger, lead antimonate has been synthesized having an Pb:Sb ratio of 1:5 and cation exchange capacity of 1.46 mequiv./g. It is fairly stable in water and dilute solutions of acids, bases and salts. Ion distribution studies on twenty metal ions have been determined on this gel at pH 1,2,3 and 5. The following mixtures have been separated: Mg²⁺ - Pb²⁺, Zn²⁺ - Pb²⁺, Zn²⁺ - Pb²⁺, Cu²⁺ - Pb²⁺, Al³⁺ - Pb²⁺, Zn²⁺ - Cd²⁺ and Mg²⁺ - Cd²⁺. Mg²⁺ and Al³⁺ were removed with 0.4 M ammonium nitrate, Cu²⁺ and Zn²⁺ with 0.4 M ammonium nitrate + 0.1M nitric acid (1:1), Pb²⁺ with 0.5M nitric acid and Cd²⁺ with 0.25M nitric acid. A tentative structure of this material is proposed on the basis of chemical analysis, pH titrations, thermogravimetry and IR spectrophotometry.     

Removal of UO2 2+ from aqueous solution by plasma functionalized MWCNTs

The study was undertaken to evaluate the feasibility of functionalized multi-walled carbon nanotubes (MWCNTs) for the removal of UO₂ ²⁺ from aqueous solutions. The MWCNTs was treated by oxygen plasma and characterized by FTIR and XPS. The characterization indicates that MWCNTs is successfully functionalized of oxygen groups such as –COOH on its surface (denote as P-MWCNTs). The sorption of UO₂ ²⁺ from aqueous solution on P-MWCNTs was studied as a function of contact time, solid contents, pH, ionic strength and temperature under ambient conditions using batch experiment. Two simplified kinetic models of pseudo-first-order and pseudo-second-order were tested to determine kinetic parameters such as rate constants, equilibrium sorption capacities and related correlation coefficients for kinetic models of the sorption process. It can be seen that the UO₂ ²⁺ sorption on P-MWCNTs could be described more favorably by the pseudo-second-order model. The thermodynamic parameters (?G°, ?S°, ?H°) calculated from the temperature-dependent sorption isotherms indicated that the sorption of UO₂ ²⁺ on P-MWCNTs were an endothermic and spontaneous processes. The results of the present study suggest that P-MWCNTs can be used beneficially in treating industrial effluents containing radioactive and heavy metal ions.     

Uptake of Divalent Metal Ions (Cu2+, Zn2+ and Cd2+) by Polysiloxane Immobilized Glycinate Ligand System

ABSTRACT

Porous solid siloxane polymer carrying glycinate functional group of formula –(CH₂)₃NHCH₂COOH has been prepared by the sol-gel process. Treatment of aqueous solutions of divalent metal ions with the polysiloxane glycinate ligand system demonstrates that this material exhibits high potential for preconcentration of metal ions (Cu²⁺, Zn²⁺ and Cd²⁺). The ligand system chemisorbs these divalent metal ions, at optimum conditions, in the order: Cd²⁺ < Zn²⁺ < Cu²⁺. The uptake of copper ions is concentration dependent but it is independent on the presence of other competing ions. Treatment of the glycinate ligand system with acidic solution results in leaching of bound ligands. The highest leaching occurs in presence of copper ions at low pH     

Transport of Ca2+, Sr2+, Ba2+, Na+, K+ and Cs+ through hollow fiber supported liquid membrane

The transport of metal ions (Ca²⁺, Sr²⁺, Ba²⁺, Na⁺, K⁺, Cs⁺) through hollow fiber supported dichlorobenzene liquid membrane has been studied. The transport of cations using 8-crown-6 ether as a carrier and picrate as co-counter ion as well as a pertraction device and capillary isotachophoresis (ITP) measurement of the cation concentration is described.     

Chelation Ion Chromatography on DMSO Impregnated Silica Gel-G Layers: Specific Separation of Cd2+, W6+, and Zr4+ from Transitional Metal Ions

Abstract

Chelation ion chromatography of metal ions on DMSO impregnated silica gel-G layers in ether; DMSO: 1M HNO₃ (1:1); n-butanol: acetone: HNO₃ (6:6:1) and di-isopropyl ether: DMSO: THF systems having varying compositions, was performed. The zero R_f for a number of cations is explained in terms of precipitation and strong adsorption. It was possible to separate Cd²⁺, W⁶⁺, Zr⁴⁺, Zn²⁺ and VO²⁺ from numerous metal ions. A number of analytically important binary and ternary separations were also achieved and were found useful in synthetic alloy analysis.     

Effect of pH on the adsorption of Ce3+, Sm3+, Eu3+ and Gd3+ ions on activated charcoal

The adsorption of metal ions such as Ce³⁺, Sm³⁺, Eu³⁺ and Gd³⁺ ions on activated charcoal has been studied as a function of pH. The adsorption mechanism of these ions is discussed in terms of hydrolyzed species formed in aqueous solution at different pH.     

Chemically modified kapok fiber for fast adsorption of Pb2+, Cd2+, Cu2+ from aqueous solution

Kapok fiber, a natural hollow fiber with thin shell and large cavity, has rarely been used as adsorbent for heavy metal ions. In this paper, kapok fibers were modified with diethylenetriamine pentaacetic acid (DTPA) after hydrophilicity treatment. The adsorption behavior of the resultant kapok-DTPA influenced by pH, adsorption time and initial concentration of metal ion was investigated. The results demonstrate that adsorption equilibrium was reached within 2 min for Pb²⁺ and Cd²⁺. Adsorption kinetics showed that the adsorption rate was well fitted by pseudo-second-order rate model. The adsorption isotherms were studied, and the best fit was obtained in the Langmuir model. The maximum adsorption capacities of kapok-DTPA were 310.6 mg g^?1 for Pb²⁺, 163.7 mg g^?1 for Cd²⁺, 101.0 mg g^?1 for Cu²⁺, respectively. After eight desorption and re-adsorption loops, the lost adsorption capacities for Pb²⁺ and Cu²⁺ were less than 10 %. Because of the large specific area derived from the hollow fiber structure, kapok-DTPA exhibited much better adsorption capacity compared with many other reported adsorbents based on natural materials.     

Preconcentration and Determination of Copper(II) by Novel Solid-Phase Extraction and High-Resolution Continuum Source Flame Atomic Absorption Spectrometry

Amberlite XAD-4 modified with N-para-anisidine-3,5-di-tert-butylsalicylaldimine was investigated as a new chealting sorbent for the selective separation and preconcentration of Cu(II). The metal ion was retained by chemical sorption on the modified resin, eluted by hydrochloric acid, and determined by high-resolution continuum source flame atomic absorption spectrometry. The prepared resin was characterized for the solid-phase extraction of Cd²⁺, Co²⁺, Cr³⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ in a column. The influence of the pH, the mass of solid phase, eluent, flow rate, and sample volume was optimized. Using the optimum conditions, only Cu(II) showed quantitative sorption at the 95% confidence level, and the recoveries of the other metal ions were below 80%. A preconcentration factor 125 was obtained for Cu(II) with a limit of detection of 0.56?µg?L^?1. The method was used for the determination of Cu(II) in tap water, river water, tomato leaves, and fish. The relative standard deviation and the relative error were lower than 7%.     

Uptake of Divalent Metal Ions (Cu2+, Zn2+ and Cd2+) by Polysiloxane Immobilized Monoamine Ligand System

ABSTRACT

Porous solid siloxane polymers carrying a monoamine functional group of formula P-(CH₂)₃NH₂ (Where P- represents a siloxane framework silica like ) has been prepared by polycondensation of Si(OEt)₄ and (MeO)₃Si(CH₂)₃-NH₂. Treatment of aqueous solutions of divalent metal ions with the polysiloxane monoamine ligand system demonstrates that this material has high potential for preconcentration of metal ions (Cu²⁺, Zn²⁺ and Cd²⁺). The tendency of these divalent metal ions to chemisorb by the monoamine ligand system at the optimum conditions increases in the order: Cd²⁺ <Zn²⁺ <Cu²⁺. The optimum pH is 5.5 for copper and 6-7 for zinc and cadmium. The ammonia/ ammonium chloride buffer solution gave maximum uptake for all metal ions. It is also found that the uptake of copper ions is concentration dependent and is independent of the presence of other competing ions. The monoamine ligand system suffers from leaching of ligand containing groups upon treatment with acidic solutions. The highest leaching occurs at low pH.     

Sludge of wastewater treatment plants as Co2+ ions sorbent

Sludges produced in huge amounts by wastewater treatment plants (WWTP) display high fertility properties; however, the presence of heavy metals restricts their use for agricultural purposes. Sorption capacity of sludge is generally much higher and it can also be considered as a cheap sorbent of heavy metals. The paper describes cobalt sorption by dried activated sludge (DAS) obtained from the aerobic phase of a WWTP. DAS was characterized by FT-IR spectroscopy, cation exchange capacity (CEC), and atomic absorption spectrometry (AAS) analysis. Sorption capacity of DAS (Q _eq) increased with the initial concentration (C ₀) of Co²⁺ (CoCl₂) within the range from 100 μmol g^?1 to 4000 μmol g^?1, reaching 15 μmol g^?1 and 200 μmol g^?1, respectively. The maximum uptake capacity (Q _max) at pH 6.0 calculated from the Langmuir isotherm model was (256 ± 9) μmol g^?1 for Co²⁺ ions. Obtained Q values were dependent on pH within the range from 3.0 to 7.0. Competitive effect of other bivalent cations such as Ni²⁺ in Co²⁺ sorption equilibrium was confirmed; which is in agreement with the hypothesis of the decisive role of ion-exchange mechanism in metal sorption. The obtained data are discussed from the point of view of potential utilization of sludges as sorbents, i.e. in non-agricultural application.     

Theoretical studies on the interaction of anionic collectors with Cu+, Cu2+, Zn2+ and Pb2+ ions

 The influence of collector structure on interaction with metal cations was modelled by computational ab initio methods. The interaction energies were calculated between metal ions (Cu⁺, Cu²⁺, Zn²⁺ and Pb²⁺) and selected collector anions: ethyl xanthate, ethyl trithiocarbonate, dithiobutyric acid, ethyl dithiocarbamate, diethyl dithiocarbamate, diethylphosphinecarbodithioic acid and diethoxyphosphinecar bodithioic acid. The strongest interaction was found with diethyl dithiocarbamate. The results give qualitative information on the effect of the collector structure on the initial adsorption steps on sulphide mineral flotation. Received: 25 September / Accepted: 11 October 2001 / Published online: 22 March 2002     

Adsorptive features of polyacrylic acid hydrogel for UO2 2+

Polyacrylic acid hydrogel was synthesized by Free Radical polymerization and characterized by means of FTIR. The FTIR results show that the carboxylic groups in the complexes coordinated to the metal ions in the form of two dentate. The effects of contact time, solid/liquid ratio, pH value, and initial concentration on the adsorption of UO₂ ²⁺ ions onto polyacrylic acid were investigated. The adsorption of UO₂ ²⁺ ions was highly dependent on the initial pH of metal ions solution and initial metal ions concentration. The adsorption kinetic data indicated that the chemical adsorption was the swiftness processes, the adsorption equilibrium could be achieved within 15 min. And there are very good correlation coefficients of linearized equations for Freundlich model, which indicated that the sorption isotherm of the hydrogel for UO₂ ²⁺ can be fitted to the Freundlich model. It was found that the maximum adsorption quantity of UO₂ ²⁺ was 1,179 mg/g. After five times of repeated tests for the hydrogel it still remained its excellent adsorption.     

Sorption properties of composite sorbent and its components,black sea bottom sediment and oxidized carbon from natural raw material

Sorption properties of a new composite sorbent containing Black Sea bottom sediments and oxidized carbon produced from a natural raw material, coconuts were examined. Quantitative characteristics demonstrating the selectivity of sorption of Cu²⁺, Zn²⁺, and Cd²⁺ ions by the synthesized sorbent and its components were obtained. The role played by the sorbent components in the sorption processes under study was elucidated.     

Monitoring 60Co activity for the characterization of the sorption process of Co2+ ions in municipal activated sludge

In large volumes produced activated sludges from wastewater treatment plants (WWTPs) with low concentrations of heavy metals can be utilized as agricultural fertilizers and soil conditioners. Increased contents of toxic xenobiotics are limiting factors that affect the utilization of these heterogeneous wastes. The main aim of our paper was to show the utilization of dried activated sludge (DAS) from municipal WWTP as potential Co²⁺ ions sorbent i.e. for non-agricultural purposes. The radio indicator method by radionuclide ⁶⁰Co and γ-spectrometry for characterization DAS sorption properties was used. DAS soluble and solid fractions were characterized by biochemical, ETAAS and CEC analysis. The sorption of Co²⁺ ions by DAS was rapid process and equilibrium was reached within 2 h. Sorption capacity of DAS (Q) increased with the initial concentration of CoCl₂ in the range from 100 to 4,000 μmol l^?1, reaching 20 and 160 μmol g^?1. Obtained Q values were depent on pH value from 2.0 to 8.0. The maximum sorption capacity (Q _max) of DAS at pH 6 calculated from mathematical model of Langmuir adsorption isotherm was 175 ± 9 μmol g^?1. FT-IR analyses showed the crucial role of carboxyl functional groups of DAS surfaces on cobalt uptake. For confirmation ion-exchange mechanism in sorption process of Co²⁺ ions by DAS scanning electron microscopy and EDX analysis were used.     

A novel method for the simple and simultaneous preconcentration of Pb2+, Cu2+ and Zn2+ ions with aid of diethylenetriamine functionalized SBA-15 nanoporous silica compound

A rapid method for the extraction and monitoring of nanogram level of Pb²⁺, Cu²⁺ and Zn²⁺ ions using uniform silanized mesopor (SBA-15) functionalized with diethylenetriamine groups and flame atomic absorption spectrometry (FAAS) is presented. The preconcentration factor of the method is 100 and detection limit of the technique is 5.5?ng?mL^?1 and 1.4?ng?mL^?1 and 0.1?ng?mL^?1 for Pb²⁺, Cu²⁺ and Zn²⁺ respectively. The time and the optimum amount of the sorbent, pH and minimum amount of acid for stripping of ions from functionalized SBA-15 were tested. The maximum capacity the functionalized SBA-15 was found to be 183.0 (±1.9) µg, 156.0 (±1.5) µg and 80.0 (±1.6) µg of Pb²⁺, Cu²⁺ and Zn²⁺/mg functionalized SBA-15, respectively.