A Fluorescence Quenching Method for the Determination of Chromium(VI) with L-Tyrosine

Abstract

A fluorescence quenching method for the determination of Cr(VI) in aqueous solution is described. The fluorescence intensity of the system is linear ever the range 5×10^?6 - 1.0×10^?4 M Cr(VI). The method has been applied to the determination of Cr(VI) In cast iron and waste water.     

Synthesis and Characterization of Copper-Doped Zinc Selenide Quantum Dots as Fluorescence Probes for Sparfloxacin

Copper-doped zinc selenide quantum dots modified with mercaptopropionic acid were prepared. The fluorescence quenching of the quantum dots was directly proportional to sparfloxacin concentration. A novel method was established to determine sparfloxacin using the copper-doped zinc selenide quantum dots as fluorescent probes. The interaction between the quantum dots and sparfloxacin was investigated by fluorescence and absorption spectroscopies. A linear relationship was obtained between the quenched fluorescence and sparfloxacin concentration from 1 × 10^?6 to 1.8 × 10^?5 moles per liter in KH₂PO₄-Na₂HPO₄ buffer at pH 7.5 using copper-doped zinc selenide quantum dots at 2.9 × 10^?6 moles per liter. The limit of detection for sparfloxacin was 2.4 × 10^?9 moles per liter. The method was used for the determination of sparfloxacin in tablets and water with satisfactory results.     

Effect of biogenic photochromic electron acceptors on chlorophyll fluorescence

It is shown that the photophysical properties of chlorophyll a (Chl) depend on the nature and relative amounts of 2-methyl-1,4-naphthoquinone (MNQ) and nicotinamide adenine dinucleotide phosphate (NADP). Photoinduced charge separation occurs in aqueous ethanol solutions of Chl (1 × 10^?5 M) and NADP (5 × 10^?6–5 × 10^?4 M), resulting in the dynamic quenching of Chl fluorescence. Coordination interaction between Chl and NADP is established at an NADP concentration of ≥5 × 10^?4 M. The nonlinear Stern-Volmer dependence in this range is due to the input from static quenching. It is shown that the quenching of Chl fluorescence in an MNQ solution at Chl and MNQ concentrations of 1 × 10^?5 M and 6.7 × 10^?5–1 × 10^?4 M, respectively, is described by a linear dependence in the Stern-Volmer coordinates; no complex formation is observed for Chl and MNQ under these conditions, and electron transfer is of the dynamic type. Static or mixed-type energy transfer from MNQ to Chl dominates at elevated MNQ concentrations.     

Iron(III) selective fluorescence probe based on perylene tetracarboxylic diimide

Responses of organic fluorophore, perylenediimide derivative N,N′-di[3-[2-(3-thienyl)ethyl]phenyl]perylene-3,4,9,10-bis-(dicarboxyimide) (PDI1) was investigated in polymer matrix of polyvinyl chloride (PVC) by emission spectrometry. Its response to Fe(III) ions was evaluated in terms of the effect of pH. The properties of time dependent response, reversibility, limit of detection, linear concentration range for the metal ion and repeatability characteristics of the sensing element also have been studied. The offered sensor exhibited remarkable fluorescence intensity quenching at pH 6.0 in the concentration range of 1 × 10^?6 to 2.5 × 10^?3 M Fe(III) ions. The reproducibility of the sensor membrane was investigated by alternately changing the solution between 1 × 10^?4 M Fe(III) in Na₂HPO₄ (4 × 10^?2 M) and NaH₂PO₄ buffer (2 × 10^?3 M).     

健那绿B的荧光猝灭研究及作为核酸测定探针的应用

用紫外可见光谱、稳态荧光发射及荧光寿命测定研究了核酸猝灭十二烷基磺酸钠胶束中的健那绿荧光。水溶液中弱的健那绿荧光在十二烷基磺酸钠胶束中被大大加强，其最大发射从425纳米移至410纳米，核酸的加入将猝灭健那绿的荧光，当健那绿浓度为2.5×10^–5 mol•L^-1时，荧光猝灭(F₀/F)分别与小牛胸腺DNA及鱼精DNA在2.4×10^–8 到 1.08×10^–7及 1.9×10^–8 到 3.8×10^–8 mol•L^-1范围内成正比, 检测限分别为1.3×10^–8 mol•L^-1 (小牛胸腺DNA)及6.3×10^–9 mol•L^-1 (鱼精DNA)。当DNA浓度较高时, 将系统偏离Stern-Volmer方程。这是因为动态猝灭和静态猝灭同时存在。方法已应用于鸡血提取液中DNA的测定, 测定结果与紫外法一致。     

Spectrofluorimetric method for the determination of uric acid in human serum

A new spectrofluorimetric method is described for the determination of uric acid (UA), that can remarkably reduce the fluorescence intensity of the enoxacin (ENX)-terbium ion (Tb³⁺) complex at 545 nm. The reduced fluorescence intensity of Tb³⁺ ion at pH 5.7 is proportional to the concentration of UA. Optimum conditions for the determination of UA have been investigated. The linear range and detection limit for the determination of UA are 6.0 × 10^?7–3.0 × 10^?5 M and 1 × 10^?7 M, respectively. The relative standard deviation (RSD) was 0.4% for 6 × 10^?6 M UA (n = 11). The method is simple, practical and relatively free of interferences. It has been successfully applied to assess UA in serum at the level of 3 × 10^?4 M with an RSD of 5–7% (n = 3). The results were evaluated by comparison with a common clinical spectrophotometric method using phosphotungstic acid as developer.     

Peroxyoxalate chemiluminescence of 1,4-dihydroxy-3-methyl-thioxanthone and quenching effect of β-cyclodextrin

The chemiluminescence generated from the reaction of bis(2,4,6-trichlorophenyl) oxalate (TCPO), hydrogen peroxide and 1,4-dihydroxy-3-methyl-thioxanthone (DMT) was investigated. Effects of reacting components, solvent and concentrations of TCPO, sodium salicylate, hydrogen peroxide and DMT were studied and their optimal values were determined. In addition, the influences of β-Cyclodextrin (β-CD) on the peroxyoxalate chemiluminescence (PO-CL) system of DMT were examined at optimized condition. The results showed that the presence of β-CD causes both enhancing and quenching effects on PO-CL system of DMT based upon its concentration. The Stern–Volmer quenching constant (K _q) was evaluated as 2.32?×?10⁴?M^?1 (R ^2?= 0.991) by creating a linear regression plot on experimentally obtained data. This study resulted in satisfactorily determination of β-CD in the range 5.0?×?10^?6 to 1.0?×?10^?4?M.     

Determination of Cysteine using the Fluorescence from a L-Tyrosine-Copper(II) Complex

A simple and sensitive method for the determination of cysteine is reported based on fluorescence quenching and recovery of L-tyrosine. At pH 10, copper(II) reacted with L-tyrosine to form a 1:1 complex that resulted in the quenching of L-tyrosine. However, the quenched fluorescence of L-tyrosine was recovered upon adding cysteine due to the strong affinity between these components. Under the optimized conditions, the recovered fluorescence was linearly proportional to the concentration of cysteine from 6.5?×?10^?7 to 4?×?10^?5?mol?L^?1 with a detection limit of 7.32?×?10^?8?mol?L^?1, demonstrating high sensitivity for the determination of cysteine. The mechanisms of fluorescence quenching and recovery were characterized and the method was used to determine cysteine in a pharmaceutical product with satisfactory results.     

A New Fluorimetric Reagent for Determination of Trace Amounts of Europium

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｃｈｅｍｉｃａｌｐｒｏｐｅｒｔｉｅｓｏｆｒａｒｅ ｅａｒｔｈｅｌｅｍｅｎｔｓａｒｅｖｅｒｙｓｉｍｉｌａｒ ,ｃｏｎｓｅｑｕｅｎｔｌｙ ,ｉｔｉｓｄｉｆｆｉｃｕｌｔｔｏｄｅｔｅｃｔａｎｉｎ ｄｉｖｉｄｕａｌｉｏｎｉｎｔｈｅｉｒｍｉｘｔｕｒｅｓｏｗｉｎｇｔｏｔｈｅｉｎｔｅｒｆｅｒｅｎｃｅｏｆｏｔｈｅｒｒａｒｅ ｅａｒｔｈｅｌｅｍｅｎｔｓ .Ｄｕｅｔｏａｈｉｇｈｅｒｓｅｎｓｉｔｉｖｉｔｙａｎｄｓｅｌｅｃｔｉｖｉｔｙ ,ｆｌｕｏｒｉｍｅｔｒｉｃｍｅｔｈｏｄｓｏｆｒａｒｅ ｅａｒｔｈｅｌ…     

A simple fluorescent sensor for highly sensitive detection of UO22+

Extensive application of nuclear energy has caused widespread environmental uranium contamination. New detection approaches without complicated sample pretreatment and precision instruments are in demand for on-site and in-time determination of uranyl ions in environmental monitoring, especially in an emergency situation. In this work, a simple and effective fluorescent sensor (Z)-N'-hydroxy-4-(1,2,2-triphenylvinyl)benzimidamide (TPE-A) with aggregation-induced emission (AIE) character was established and studied. It could realize to detect UO₂²⁺ via quenching the fluorescence of its aggregation-induced emission, with good selectivity and sensitivity. Such strategy shows a wide linear range from 5.0 × 10^?8 mol/L to 4.5 × 10^?7 mol/L (R² = 0.9988) with exceptional sensitivity reaching 4.7 × 10^?9 mol/L, which is far below the limit for uranium in drinking water (30 μg/L, ca. 1.1 × 10^?7 mol/L) stipulated by the WHO. A response time less than four minutes make it rapid for uranyl ion measurement. It was applied for detection of uranyl ion in spiked river water samples with recoveries in the range of 98.7%-104.0%, comparable to those obtained by ICP-MS. With the advantages of portable apparatus, rapid detection process and high sensitivity, TPE-A can serve as a promising fluorescent sensor for the detection of UO₂²⁺ in environmental water samples.     

Cyclic voltammetry of Tifluadom at a C18-modified carbon-paste electrode

Tifluadom, N-[5-(2-fluorophenyl)-2,3-dihydro-methyl-1H-1,4-benzodiazepine]-2-4-methyl-3-thiophene carboxamide, was determined by using a carbon-paste electrode modified with C₁₈ μBondapak. Adsorption on the electrode served as a preconcentration step which improved the limit of detection. Preconcentration for 5 min (open circuit) gave a linear range of 2.2×10^?7 M?4.5×10^?6 M with a detection limit of 1.3×10^?7 M (%C₁₈=25, w/w) for Tifluadom in Britton-Robinson buffer pH 6. The determination of Tifluadom added to urine required no preliminary treatment; the detection limit was 1.3×10^?6 M.     

Electrochemical investigation and determination of ceftazidime in pharmaceutical dosage forms and human urine

A voltammetric study of the oxidation of Ceftazidime (CEFT) has been carried out at the glassy carbon electrode by cyclic, differential pulse (DPV) and square wave (SWV) voltammetry. The oxidation of CEFT was irreversible and exhibited diffusion controlled process depending on pH. The oxidation mechanism was proposed and discussed. According to the linear relationship between the peak current and concentration, DPV and SWV voltammetric methods for CEFT assay in pharmaceutical dosage forms and human urine were developed. For analytical purposes, a well resolved diffusion controlled voltammetric peak was obtained in 0.1 M H₂SO₄ at 1.00 and 1.02 V for differential pulse and square wave voltammetric techniques, respectively. The linear response was obtained within the range of 4 × 10^?6?8 × 10^?5 M with a detection limit of 6 × 10^?7 M for differential pulse and 4 × 10^?6–2 × 10^?4 M with a detection limit of 1 × 10^?6 M for square wave voltammetric technique. The determination of CEFT in 0.1 M H₂SO₄ was possible over the 2 × 10^?6–1 × 10^?4 M range in urine sample for both techniques. The standard addition method was used for the recovery studies.     

Non-enzymatic hydrogen peroxide sensor based on a nanoporous gold electrode modified with platinum nanoparticles

A novel non-enzymatic electrochemical sensor based on a nanoporous gold electrode modified with platinum nanoparticles was constructed for the determination of hydrogen peroxide (H₂O₂). Platinum nanoparticles exhibit good electrocatalytic activity towards hydrogen peroxide. The nanoporous gold (NPG) increases the effective surface area and has the capacity to promote electron-transfer reactions. With electrodeposition of Pt nanoparticles (NPs) on the surface of the nanoporous gold, the modified Au electrode afforded a fast, sensitive and selective electrochemical method for the determination of H₂O₂. The linear range for the detection of H₂O₂ was from 1.0 × 10^?7 M to 2.0 × 10^?5 M while the calculated limit of detection was 7.2 × 10^?8 M on the basis of the 3σ/slope (σ represents the standard deviation of the blank samples). These findings could lead to the widespread use of electrochemical sensors to detect H₂O₂.     

Sensitive and efficient determination of gabapentin in human serum based on capillary electrophoresis with laser-induced fluorescence detection

A sensitive and efficient analytical method for gabapentin (GBP) in human serum based on capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection has been established. 6-Oxy-(N-succinimidyl acetate)-9-(2′-methoxycarbonyl) fluorescein (SAMF), a new synthesized fluorescent reagent, was used for precolumn derivatization of the non-fluorescent drug in serum. γ-Aminobutyric acid (GABA) was used as an internal standard (I.S.). The best derivative condition was obtained in phosphate buffer (pH 8) at room temperature for 10 min. Optimal separation and detection were obtained with a background electrolyte (BGE) of 3.5 × 10^?2 M phosphate buffer (pH 5.5) and laser-induced fluorescence detection excited at 473 nm. The method developed for GBP was linear over the concentration range of 4.0 × 10^?9 to 4.0 × 10-7 M. The concentration limit of detection was 2.0 × 10^?10 M (signal-to-noise ratio = 3). The sensitive method was used for the determination of GBP in serum samples.     

Optimization of a sensitive method for the “switch-on” determination of mercury(II) in waters using Rhodamine B capped gold nanoparticles as a fluorescence sensor

Monodisperse and “naked” gold nanoparticles (GNPs) were modified with thioglycolic acid (TGA). The fluorescence of rhodamine B (RB) is quenched completely by the gold NPs surface with negative charge mainly as a result of fluorescence resonance energy transition (FRET) and collision. The quenching mechanism can be described by a Langmuir isotherm, which was systematically investigated by steady-state fluorescence spectrometry and absorption spectrometry. Hg(II) ion disrupts the GNPs–RB pair, producing a large “switch-on” fluorescence. A low background, highly sensitive and reproducible fluorescence assay for Hg(II) is presented. Under the optimum conditions, the restoration fluorescence intensity is proportional to the concentration of Hg(II). The calibration graphs are linear over the range of 1.0?×?10^?9 to 3.1?×?10^?8 mol L^?1 with a detection limit of 4.0?×?10^?10 mol L^?1. The relative standard deviation was 1.2% for a 5.0?×?10^?9 mol L^?1 Hg(II) solution (N?=?6). This method was applied to the analysis of Hg(II) in environmental water samples, and the results were consistent with those of atomic absorption spectroscopy (AAS).     

Phthalocyanine-based fluorescent chemosensor for the sensing of Zn (II) in dimethyl sulfoxide-acetonitrile

A tetra-substituted phthalocyanine based on 4-[2-(4-nitrophenoxy)ethoxy]phthalonitrile carrying nitrophenyl group for the sensing of Zn²⁺ has been prepared and characterized by elemental analysis, FT-IR, ¹H and ¹³C NMR, and MS spectral data. The sensing of Zn²⁺ is based on the fluorescence quenching of Pc. Both absorbance and fluorescence spectra of ZnPc exhibit distinct changes in visible region in response to treatment with Zn²⁺ ion in dimethyl sulfoxide. The fluorescence spectrum of the ligand showed quenching in the intensity of the signal at 688?nm for Zn²⁺. The complex composition of ZnPc was found 1:1 by means of spectrophotometric and spectrofluorimetric titration data. The spectrofluorimetric method showed good sensitivity for Zn²⁺ with linear range and detection limit of 4.0?×?10^?6–4.4?×?10^?5 and 2.4×10^?7?M, respectively.     

Spectrophotometric determination of trace nitrite based on catalytic oxidation of thionine by potassium bromate

A kinetic method for the determination of trace nitrite (7 × 10^?9–1.2 × 10^?6 M) based on its catalytic effect on the reaction between potassium bromate and thionine in strongly acidic media is reported. The reaction is monitored spectrophotometrically by measuring the decreasing colour of thionine at 602 nm by the fixed-time method. At a given time of 5 min at 30°C, the detection limit is 2 × 10^?9 M (0.001 absorbance ratio, b = 1 cm) and the relative standard deviation for 1 × 10^?6 M nitrite is 2.6% (n = 6). The method is free from most interferences, especially from large amounts of nitrate. The procedure was successfully applied to the determination of trace nitrite in natural water and sausage samples without preconcentration and separation.     

Selective fluorometry of cytochrome c using glutathione-capped CdTe quantum dots in weakly basic medium

Glutathione-capped CdTe quantum dots (GSH-CdTe QDs) were synthesized in aqueous medium. Their interactions with proteins, especially three heme-containing proteins, were investigated over a broad pH range. At 6.0?<?pH?<?8.0, the fluorescence of the GSH-CdTe QDs can be effectively quenched by cytochrome c (Cyt. c) and hemoglobin, respectively. At pH?>?8.0, only cytochrome c quenched the fluorescence of the GSH-CdTe QDs, and no significant fluorescence changes were observed for hemoglobin or other proteins. Based on the distinct fluorescence response, a novel method has been developed for the selective determination of cytochrome c using GSH-CdTe QDs as the fluorescence probe at pH 9.0. Under optimum conditions, the linear range of the calibration curve is from 3.2?×?10^?8 to 2.4?×?10^?6?mol L^?1 and the detection limit is 3.0?×?10^?9?mol L^?1. The method has been applied to the determination of cytochrome c in three synthetic and real samples, and satisfactory results were obtained with QDs through selecting the proper pH value.