Sample preparation in the determination of metals in oil and petroleum products by ICP MS

Comparative elemental analysis of the Tengiz oil and diesel fuel is performed by inductively coupled plasma mass-spectrometry with autoclave digestion, digestion, dilution with organic solvents, and also rotating coiled columns (RCCs). The advantages and drawbacks of each of the listed sample preparation techniques for the separation of microelements are discussed. In contrast to the other versions, the use of RCCs is shown to provide a unique opportunity to preconcentrating microelements from oil and petroleum products into tiny volumes of aqueous solutions (10 mL of 0.5 M HNO₃). The eluate prepared can be used in the subsequent analysis by ICP MS with no extra sample preparation steps. The RCC preconcentration of elements from oil and petroleum products makes it possible to determine metals in concentrations from μg/kg to ng/kg.     

Direct determination of cadmium and lead in pharmaceutical ingredients using anodic stripping voltammetry in aqueous and DMSO/water solutions

A new electrochemical method has been developed to detect and quantify the elemental impurities, cadmium(II) (Cd²⁺) and lead(II) (Pb²⁺), either simultaneously or individually in pharmaceutical matrices. The electro-analytical approach, involving the use of anodic stripping voltammetry (ASV) on an unmodified glassy carbon electrode, was performed in both aqueous and in a 95/5 dimethyl sulfoxide (DMSO)/water solutions, without acid digestion or dry ashing to remove organic matrices. Limits of detection (LODs) in the μg L⁻¹ [or parts per billion (ppb), mass/volume] range were obtained for both heavy metals - in the presence and absence of representative pharmaceutical components. To the best of our knowledge, the work demonstrates the first analysis of heavy metals in DMSO/water solutions through ASV. The strong reproducibility and stability of the sensing platform, as well as obviation of sample pretreatment show the promise of utilizing ASV as a sensitive, robust, and inexpensive alternative to inductively-coupled-plasma (ICP)-based approaches for the analysis of elemental impurities in, e.g., pharmaceutical-related matrices.     

Direct μ-flow injection isotope dilution ICP-MS for the determination of heavy metals in oil samples

The determination of trace elements in oil samples and their products is of high interest as their presence significantly affects refinery processes and the environment by possible impact of their combustion products. In this context, inductively coupled plasma mass spectrometry (ICP-MS) plays an important role due to its outstanding analytical properties in the quantification of trace elements. In this work, we present the accurate and precise determination of selected heavy metals in oil samples by making use of the combination of μ-flow direct injection and isotope dilution ICP-MS (ICP-IDMS). Spike solutions of ⁶²Ni, ⁹⁷Mo, ¹¹⁷Sn and ²⁰⁶Pb were prepared in an organic solvent, mixed directly with the diluted oil samples and tested to be fit for purpose for the intended ID approach. The analysis of real samples revealed strong matrix effects affecting the ICP-MS sensitivity, but not the isotope ratio measurements, so that accurate results are obtained by ICP-IDMS. Typical relative standard deviations were about 15% for peak area and peak height measurements, whereas the isotope ratios were not significantly affected (RSD < 2%). The developed method was validated by the analysis of a metallo-organic multi-element standard (SCP-21, typically applied as a calibration standard) and the standard reference material SRM1084a (wear metals in lubricating oil). The obtained results were in excellent agreement with the certified values (recoveries between 98% and 102%), so the proposed methodology of combining μ-flow direct injection and ICP-IDMS can be regarded as a new tool for the matrix-independent, multi-element and reliable determination of trace elements in oil and related organic liquids.     

Effect of Asphaltenes and Resins on Asphaltene Aggregation Inhibition,Rheological Behaviour and Waterflood Oil-Recovery

This study presents an investigation about the influence of resins and asphaltenes, extracted from two Mexican crude oils (light and heavy oil samples), on the asphaltene aggregation inhibition, rheological behavior, and waterflood oil-recovery. Resins and asphaltenes were characterized by means of elemental analysis, metals analysis by atomic absorption, ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopy, and electrospray ionization mass spectrometry (ESI-MS) in order to evaluate the effect of their structural parameters on the phenomena studied. Efficiency of the resins fraction as natural inhibitors of asphaltene aggregation was evaluated trough ultraviolet–visible (UV–vis) spectroscopy. Results showed better efficiencies of resins on asphaltene aggregation inhibition at resin/asphaltene (R/A) ratios close to unity and at high temperature. In addition, efficiencies were influenced by structural characteristics of the asphaltene–resin system. Rheological behavior of the heavy crude oil sample was significantly influenced by the presence of asphaltenes and resins. Finally, asphaltenes and resins played an important role on wettability and waterflood oil-recovery.     

Simultaneous separation and preconcentration of ultra-trace of Cu(II), Pb(II) and Zn(II) in water samples by air-assisted liquid–liquid microextraction prior to determination by graphite furnace atomic absorption spectrometry

A simple, rapid and efficient method has been developed for the extraction, preconcentration and determination of copper, lead and zinc ions in water samples by air-assisted liquid–liquid microextraction coupled with graphite furnace atomic absorption spectrometry (GFAAS). In the proposed method, much less volume of an organic solvent (in the order of some µL) was used as the extraction solvent in the absence of disperser solvent. Fine organic droplets were formed by sucking and injecting of the mixture of aqueous sample solution and extraction solvent with a syringe for several times in a conical test tube. After extraction, phase separation was achieved by centrifugation and the enriched analytes in the sedimented phase were determined by GFAAS. Several variables potentially affecting the extraction efficiency were investigated and optimized. Calibration graphs were linear in the concentration range of 45.0–1100 ng L^?1. Detection limits were in the range of 18.0–26.0 ng L^?1. The accuracy of the developed procedure was checked by analyzing NRCC-SLRS4 Riverine water as a certified reference material. Finally, the proposed method was successfully applied to determine the selected heavy metals in tap, surface and river water samples.     

Sample preparation methods for subsequent determination of metals and non-metals in crude oil—A review

In this review sample preparation strategies used for crude oil digestion in last ten years are discussed focusing on further metals and non-metals determination. One of the main challenges of proposed methods has been to overcome the difficulty to bring crude oil samples into solution, which should be compatible with analytical techniques used for element determination. On this aspect, this review summarizes the sample preparation methods for metals and non metals determination in crude oil including those based on wet digestion, combustion, emulsification, extraction, sample dilution with organic solvents, among others. Conventional methods related to wet digestion with concentrated acids or combustion are also covered, with special emphasis to closed systems. Trends in sample digestion, such as microwave-assisted digestion using diluted acids combined with high-efficiency decomposition systems are discussed. On the other hand, strategies based on sample dilution in organic solvents and procedures recommended for speciation analysis are reported as well as the use of direct analysis in view of the recent importance for crude oil field. A compilation concerning sample preparation for crude oil provided by official methods as well as certified reference materials available for accuracy evaluation is also presented and discussed.     

A layered magnetic iron/iron oxide nanoscavenger for the analytical enrichment of ng-L concentration levels of heavy metals from water

Magnetically driven separation techniques have received considerable attention in recent decade because of their great potential application. In this study, we investigate the application of an unmodified layered magnetic Fe/Fe₂O₃ nanoscavenger for the analytical enrichment and determination of sub-parts per billion concentrations of Cd(II), Pb(II), Ni(II), Cr(VI) and As(V) from water samples. The synthesized nanoscavenger was characterized by BET, TGA, XRD and IR and the parameters influencing the extraction and recovery of the preconcentration process were assessed by atomic absorption spectrometry. The possible mechanism of the enrichment of heavy metals on Fe/Fe₂O₃ was proposed, which involved the dominant adsorption and reduction. The nanoscale size offers large surface area and high reactivity of sorption and reduction reactions. The obtained limits of detection for the metals studied were in the range of 20–125 ng L⁻¹ and the applicability of the nanomaterial was verified using a real sample matrix. The method is environmentally friendly as only 15 mg of nanoscavenger are used, no organic solvent is required for the extraction and the experiment is performed without the need for filtration or preparation of packed preconcentration columns.     

A combined method of sample preparation for the determination of the total element composition of oils

A comprehensive approach to the determination of the elemental composition of oils (including those with a viscosity of 5000 mm²/s) is proposed. It ensures the determination of the most elements present in oils using two versions of sample preparation, autoclave decomposition of oil samples and extraction preconcentration of elements from oil into an aqueous solution on rotating coiled columns (RCCs). The application of RCCs in the elemental analysis of oil ensures the preconcentration of a number of trace elements from oil (including rare-earth elements) and the determination of their concentrations at a level of ng/kg. The preconcentration factor of trace elements from oil using an RCC depends on the volume of oil sample pumped through a constant volume of the stationary phase (acid solution) retained in the column and on the speciation of elements in the oil.     

Extraction and determination of organophosphorus pesticides in water samples by a new liquid phase microextraction-gas chromatography-flame photometric detection

A rapid, sensitive and efficient liquid phase microextraction (LPME) method was developed to determine trace concentrations of some organophosphorus pesticides in water samples. This method combines liquid phase microextraction with gas chromatographic (GC) analysis in a simple and inexpensive apparatus involving very little organic solvent consumption. It involves exposing a floated drop of an organic solvent on the surface of aqueous solution in a sealed vial. Experimental parameters which control the performance of LPME such as type of organic solvent, organic solvent and sample volumes, sample stirring rate, sample solution temperature, salt addition and exposure time were investigated and optimized. Finally, the enrichment factor, dynamic linear range (DLR), limit of detection (LOD) and precision of the method were evaluated by the water samples spiked with organophosphorus pesticides. Using optimum extraction conditions, very low detection limits (0.01-0.04 μg L⁻¹) and good linearities (0.9983 < r² < 0.9999) were achieved. The LPME was performed for determination of organophosphorus pesticides in different types of natural water samples and acceptable recoveries (96-104%) and precisions (3.5 < R.S.D.% < 8.9) were obtained. The results suggested that the newly proposed LPME method is a rapid, accurate and effective sample preparation method and could be successfully applied for extraction and determination of organophosphorus pesticides in water samples.     

Rapid determination of essential oil compounds in Artemisia Selengensis Turcz by gas chromatography-mass spectrometry with microwave distillation and simultaneous solid-phase microextraction

In the work, for the first time, two solvent-free sample preparation techniques of microwave distillation (MD) and solid-phase microextraction (SPME) were combined, and developed for determination of essential oil compounds in traditional Chinese medicine (TCM). Using the proposed method, isolation, extraction and concentration of TCM essential oil compounds can be carried out in a single step. To demonstrate its feasibility, MD-SPME was compared with a conventional technique, steam distillation (SD), for gas chromatography-mass spectrometry (GC-MS) analysis of essential oil compounds in a TCM, Artemisia Selengensis Turcz. Forty-nine compounds in the TCM were separated and identified by the present method, while only 26 compounds were detected by SD method. Relative standard deviation (R.S.D.) values less than 9% show that the present method has good precision. The SD method required long time (6 h) to isolate of the essential oil, and large amount of organic solvent for further extraction, while MD-SPME needed little time (only 3 min) to prepare sample, and no organic solvent. These results show that MD-SPME-GC-MS is a simple, rapid and solvent-free method for determination of TCM essential oil.     

Biocatalytic removal of nickel and vanadium from petroporphyrins and asphaltenes

Asphaltenes from a crude oil rich in heavy metals (Castilla crude oil) were fractionated and partially characterized. Biocatalytic modifications of these fractionated asphaltenes by three different hemoproteins: chloro-peroxidase (CPO), cytochrome C peroxidase (Cit-C), and lignin peroxi-dase (LPO) were evaluated in both aqueous buffer and organic solvents. The reactions were carried out in aqueous buffers, ternary systems of toluene: isopropanol: water, and aqueous-miscible organic solvent solutions with petroporphyrins as substrate. The petroporphyrins were more soluble in the ternary systems and aqueous miscible-organic solvent systems than in the aqueous buffer systems. However, only the CPO-mediated reactions were effective in eliminating the Soret peak in both aqueous and organic solvent systems. The effects of CPO-mediated reactions on the release of the metals complexed with the porphyrins and asphaltenes were also determined. Chloroperoxidase was able to alter components in the heavy fractions of petroleum and remove 53 and 27% of total heavy metals (Ni and V, respectively) from petroporphyrin-rich fractions and asphaltenes     

加参片中大孔树脂有机残留溶剂的顶空-气相色谱法测定

运用顶空-气相色谱法在同一色谱条件下以乙苯为内标测定了中药复方制剂加参片中可能存在的正己烷、苯、正癸烷、甲苯、二甲苯(对、间、邻)、苯乙烯等8种大孔树脂残留溶剂,为大孔树脂的安全应用提供保证.在设定的顶空-气相条件下,各待测残留物与复方制剂中的其它成分分离良好,在考察的浓度范围内线性关系良好(r=0.9966～0.9998),加样回收率92.05%～112.46%,精密度0.7%～5.8%,各溶剂检测限满足残留溶剂的限度要求.结果表明,使用净品级大孔树脂,能够简化预处理工作,经其提取纯化制得的3批成品中,各残留溶剂均未检出,符合限度要求.该方法适用于中药复方制剂加参片中大孔树脂残留溶剂的控制.此外,本研究对色谱条件、顶空条件进行了探讨.     

A water-in-oil emulsion containing Kelex-100 for the speciation analysis of trace heavy metals in water

A water-in-oil (w/o) emulsion containing Kelex-100 (7-dodecenyl-8-quinolinol) and Span-80 (sorbitan monooleate, non-ionic surfactant) was ultrasonically prepared from 1.0 mol l⁻¹ hydrochloric acid and a (1 + 3) mixture of toluene and n-heptane. The resulting emulsion was gradually injected into water sample and dispersed as numerous tiny globules (0.01-0.1 mm in diameter). Dissolved inorganic species (free metal species) of heavy metals (e.g., Fe, Co, Cu, Cd, and Pb) were selectively transported through the oil layer into the internal aqueous phase of the emulsion, leaving other species, such as humic complexes and suspended particles (larger than 1 μm), in the sample solution. After collecting the dispersed emulsion globules, they were demulsified and the heavy metals in the segregated aqueous phase were determined by graphite-furnace atomic absorption spectrometry. The emulsion-based separation method allowed the selective collection of free metal species with a high concentration factor of 100, whereas the conventional solvent extraction did not offer such discrimination. This unique property of the emulsion method was successfully applied to the selective determination of free species of heavy metals in fresh water samples.     

Identification of volatile basic components in tobacco by headspace liquid-phase microextraction coupled to matrix-assisted laser desorption/ionization with Fourier transform mass spectrometry

A method incorporating headspace liquid-phase microextraction (HS-LPME) coupled to matrix-assisted laser desorption/ionization (MALDI) with Fourier transform mass spectrometry (FTMS) was established to analyze volatile basic components in tobacco. The sample preparation volume for MALDI-MS was compatible with the volume of the solvent microdrop in the HS-LPME procedure. The pH and the polarity of the solvent for HS-LPME were adjusted by choice of the MALDI matrix and matrix additive. Based on the elemental composition and tandem mass spectrometry information, 25 volatile nitrogenous compounds in tobacco were detected and identified. The approach is fast and sensitive, and has the potential for automation for high-throughput analysis. This approach offers an alternative method for analysis of trace volatile organic compounds in complex samples.     

Tributyl phosphate degradation by immobilized cells of aCitrobacter sp.

Tributyl phosphate (TBP), a plasticizer and solvent, is used in nuclear fuel reprocessing, generating TBP wastes laden with residual uranium. ACitrobacter sp. accumulated heavy metals via a phosphohydrolase(s) that precipitated metals with inorganic phosphate liberated from an organic phosphate “donor” molecule (TBP). Mutant analysis suggested that TBP hydrolysis was not attributable to a previously documented acid phosphatase (monoesterase). Purified monoesterase had little activity against phospho di- and triesters, had no requirement for Mg²⁺ or Mn²⁺, and was EDTA-resistant. Conversely, TBP cleavage by immobilized cells was enhanced by Mg²⁺, and ininhibited by Mn²⁺ and EDTA. A separate phosphotri/diesterase was implicated.     

Determination of lead in petroleum and petroleum products by atomic absorption spectrometry with a carbon rod atomizer

The use of a carbon rod atomizer for the analysis of lead in petroleum and petroleum products is described. Variables affecting sensitivity studied include: type of lead salt and type of solvent for standard and sample preparation, hydrogen diffusion flame, choice of analytical wavelength and interferences. For the 217.00-nm line, a sensitivity of 1·10^-11 g (absolute) and for the 283.31-nm line, a detection limit of 2·10^-12 g (absolute) are reported. Results of analysis of gasoline, used bunker heating oil, used jet engine lubricating oil, and crude oil for lead content are presented. An organic-to-aqueous solvent extraction system for lead is described.     

Leaching behavior of metal-containing species in residual oils with different organic solvents

The leaching behavior of two different residual oils is investigated with 24 organic solvents including alkanes, aromatics, esters, ethers ketones, alcohols and nitrogen compounds. A 2-g portion of sample oil is shaken with 20 ml of the organic solvent. The leaching of the organic matrix of the oil is determined by weighing the dissolved organic matrix after removal of solvent. The leaching of vanadium, iron and nickel was determined by flame atomic absorption spectrophotometry after ashing of the dissolved fraction. The leaching of those metals depends strongly on the solvent used; for example, vanadine is almost completely leached into toluene, but only slightly into methanol. The leaching of iron is poor compared with that of vanadium or nickel. In most solvents, leaching of those metal-containing species is poorer than that of organic material. Exceptionally, N,N-dimethylformamide is more efficient in leaching vanadium species than organic material.     

Combination of asymmetric flow field-flow fractionation (AF4) and total-reflexion X-ray fluorescence analysis (TXRF) for determination of heavy metals associated with colloidal humic substances

To assess the structural variability of colloidal humic substances and the associated heavy metals an off-line coupling of asymmetric flow field-flow fractionation (AF⁴) with total-reflection X-ray fluorescence analysis (TXRF) is presented. AF⁴ allows a rather gentle separation of colloids with a minimum of interference and artifacts as no shear forces, drying, or interactions with a stationary phase are involved. After a calibration with suitable polymer particles of known molecular weight, the molecular weight distribution of colloidal humic substances between 1 and 10³ kDa can be assessed with AF⁴. The combination with TXRF permits a simultaneous multielement analysis after preconcentration of samples on the AF⁴ channel using an optimized buffer. The analysis of seepage and sewage water sample and a sewage sludge sample yielded continuous distributions of the molecular weight and the associated heavy metals. The potential of AF⁴-TXRF coupling for the study of metal ion exchange equilibria with colloids was demonstrated by spiking seepage water with various heavy metals and subsequent AF⁴-TXRF analysis of the heavy metals bound to the colloidal fraction (Cu, Cr, Zn, Ni, Co).     

High‐performance liquid chromatography with fluorescence detection for the rapid analysis of pheophytins and pyropheophytins in virgin olive oil

Pheophytins and pyropheophytin are degradation products of chlorophyll pigments, and their ratios can be used as a sensitive indicator of stress during the manufacturing and storage of olive oil. They increase over time depending on the storage condition and if the oil is exposed to heat treatments during the refining process. The traditional analysis method includes solvent‐ and time‐consuming steps of solid‐phase extraction followed by analysis by high‐performance liquid chromatography with ultraviolet detection. We developed an improved dilute/fluorescence method where multi‐step sample preparation was replaced by a simple isopropanol dilution before the high‐performance liquid chromatography injection. A quaternary solvent gradient method was used to include a fourth strong solvent wash on a quaternary gradient pump, which avoided the need to premix any solvents and greatly reduced the oil residues on the column from previous analysis. This new method not only reduces analysis cost and time but shows reliability, repeatability, and improved sensitivity, especially important for low‐level samples.     

Determination of benzo[a]pyrene in edible oils using phase‐transfer‐catalyst‐assisted saponification and supramolecular solvent microextraction coupled to HPLC with fluorescence detection

For the analysis of edible oils, saponification is well known as a useful method for eliminating oil matrices. The conventional approach is conducted with alcoholic alkali; it consumes a large volume of organic solvents and impedes the retrieval of analytes by microextraction. In this study, a low‐organic‐solvent‐consuming method has been developed for the analysis of benzo[a]pyrene in edible oils by high‐performance liquid chromatography with fluorescence detection. Sample treatment involves aqueous alkaline saponification, assisted by a phase‐transfer catalyst, and selective in situ extraction of the analyte with a supramolecular solvent. Comparison of the chromatograms of the oil extracts obtained by different microextraction methods showed that the supramolecular solvent has a better clean‐up effect for the unsaponifiable matter from oil matrices. The method offered excellent linearity over a range of 0.03– 5.0 ng mL⁻¹ (r > 0.999). Recovery rates varied from 94 to 102% (RSDs <5.0%). The detection limit and quantification limit were 0.06 and 0.19 μg kg⁻¹, respectively. The proposed method was applied for the analysis of 52 edible oils collected online in China; the analyte contents of 23 tested oil samples exceeded the maximum limit of 2 μg kg⁻¹ for benzo[a]pyrene set by the Commission Regulation of the European Union.