New example of proline-induced fragmentation in electrospray ionization mass spectrometry of peptides

The positive ion electrospray ionization (ESI+) mass spectra of peptides usually display only protonated molecules provided that soft ionization conditions are applied (low cone voltage to prevent in-source dissociations). Such ions can be multiply charged depending on the molecular weight of the studied compounds. We have experienced an unexpected behavior during the ESI analysis of a modified peptide of relatively high mass (3079 Da). A specific fragmentation occurred even under soft energetic conditions, leading to a mass spectrum containing multiply charged molecular and fragment ions. The selective rupture involved the amide bond between the glutamic acid and proline residues (E-P sequence). The successive replacement of each amino acid by an alanine residue (positional scanning study) was undertaken to assess which part of the sequence induced such selective and abundant fragmentation on multiply charged species. The succession P-P was evidenced as the minimum unit giving rise to the first peptide bond rupture in the sequence X-P-P. Any acidic amino acid at the X position (X = D, E) favored the fragmentation by an intramolecular interaction. Such proline-induced fragmentation occurring readily in the source differed from the literature data on the specific behavior of proline-containing peptides where bond ruptures occur solely in dissociation conditions.     

Electrolytic deposition of metals on to the high-voltage contact in an electrospray emitter: implications for gas-phase ion formation

The electrospray ion source is an electrolytic flow cell. Electrolytic reactions in the electrospray emitter maintain the production of charged droplets by this ion source that contain an excess of ions of one polarity. These redox reactions necessarily change the composition of the solution that initially enters the emitter. As a result, the ions ultimately observed in the gas phase by electrospray mass spectrometry (ESMS) may be substantially influenced by both the nature and extent of these electrochemical reactions. It is demonstrated in this paper that Ag(+), Cu(2+) and Hg(2+) ions in solution can be electrolytically reduced and deposited as the respective metals on to the surface of the high-voltage contact in the electrospray emitter in negative ion mode electrospray. The deposited metals are shown to be liberated from the surface by switching the electrospray high-voltage polarity to operate in the positive ion mode. The deposited metals are oxidized in positive ion mode, releasing the metal ions back into solution where they are detected in the electrospray mass spectrum. In a semi-quantitative analysis, it was found that up to 50% of the Ag(+) in a 2.5 microM solution was deposited on the high-voltage contact of the emitter as the solution flowed through the emitter. Deposition of Cu(2+) and Hg(2+) was less efficient. These data illustrate that in the analysis of metals by ESMS, one must be aware that both the concentration and form of the metals may be altered by electrochemical processes in the emitter. Hence reduction or oxidation of metals in the electrospray emitter, which may remove ions from solution, or change metal valence, would be expected to impact both quantitative metal determinations and metal speciation attempts using ESMS.     

Tandem mass spectrometry of kahalalides: identification of two new cyclic depsipeptides, kahalalide R and S from Elysia grandifolia

Spectra obtained using electrospray ionization mass spectrometry (ESI-MS) of the mollusk Elysia grandifolia showed a cluster of molecular ion peaks centered at a molecular mass of 1478 Da (kahalalide F, an anticancer agent). Two new molecules, kahalalide R (m/z 1464) and S (m/z 1492) were characterized using tandem mass spectrometry. The mass differences of 14 Da suggest that they are homologous molecules. In addition, previously identified kahalalide D and kahalalide G are also reported. However, the ESI-MS of the mollusk's algal diet Bryopsis plumosa showed the presence of only kahalalide F. The amino acid sequences of kahalalide R and S are proposed using collision-induced dissociation (CID) experiments of singly and doubly charged molecular ions and by comparison with the amino acid sequence of kahalalide F. The pathway is presented for the loss of amino acid residues in kahalalide F. It is observed that there is sequential loss of amino acids in the linear peptide chain, but in the cyclic part the ring opens at the amide bond rather than at the lactone linkage, and the loss of amino acid residues is not sequential. The CID experiment of the alkali-metal-cationized molecular ions shows that the sodium and potassium ions coordinate to the amide nitrogen/oxygen in the linear peptide chain of the molecule and not to the lactone oxygen of the lactone. In the case of kahalalide D, CID of the protonated peptide opens the depsipeptide ring to form a linear peptide with acylium ion, and fragment ion signals indicate losses of amino acids in sequential order. In this study, tandem mass spectrometry has provided the detailed information required to fully characterize the new peptides.     

Pulsed dual electrospray ionization for In/In reactions

A pulsed dual electrospray ionization source has been developed to generate positive and negative ions for subsequent ion/ion reaction experiments. The two sprayers, typically a nano-electrospray emitter for analytes and an electrospray emitter for reagents, are positioned in a parallel fashion close to the sampling orifice of a triple quadrupole/linear ion trap tandem mass spectrometer (Sciex Q TRAP). The potentials applied to each sprayer are alternately pulsed so that ions of opposite polarity are generated separately in time. Ion/ion reactions take place after ions of each polarity are sequentially injected into a high-pressure linear ion trap, where axial trapping is effected by applying an auxiliary radio frequency voltage to the end lenses. The pulsed dual electrospray source allows optimization of each sprayer and can be readily coupled to any spray interface with no need for instrument modifications, provided the potentials required to transmit the ion polarity of interest can be alternated in synchrony with the emitter potentials. Ion/ion reaction examples such as charge reduction of multiply charged protein ions, charge inversion of peptides ions, and protein-protein complex formation are given to illustrate capabilities of the pulsed dual electrospray source in the study of gas-phase ion/ion chemistry.     

High-energy collision-induced dissociation of multiply charged polypeptides produced by electrospray

The recent commercial implementation of an electrospray source on a four-sector mass spectrometer has allowed the study of high-energy collisional activation of multiply charged cations. With this configuration, higher mass-to-charge ratios can be accommodated in both precursor ion selection and fragment ion detection. Good mass accuracy facilitates analysis of fragment ions and allows more reliable mechanistic correlation of these fragments. A convenient scheme was devised to permit the use of kilovolt potentials in both MS-I and MS-II, with precursors of varying charge states. Algorithms were devised to assign masses of different types of multiply charged fragment ions. Nine polypeptides were studied in the mass range 2000–5000 Da. Through this entire mass range, fragment ions were observed to be amply formed by cleavages in both the backbone and side chains, analogous to high-energy collisional activation of singly charged ions. This stands in sharp contrast to the patterns reported with low-energy, multiple collisions. Abundances of sequence ion series are influenced by the positions of basic residues. Analysis of charge distributions in fragment ions also indicates that the charges tend to be spread out across the peptides.     

Manipulation of charge states of biopolymer ions by atmospheric pressure ion/molecule reactions implemented in an extractive electrospray ionization source

A home-made extractive electrospray ionization source is coupled to an linear quadrupole ion trap mass spectrometer to investigate ion/molecule reactions of biopolymers at ambient pressure. Multiply charged biopolymers such as peptides and proteins generated in an electrospray are easily reduced to a low charge state by the atmospheric pressure ion/molecule reactions occurring between the multiply charged ions and a strong basic reagent sprayed in neutral form into the electrospray plume. The charge state of the biopolymer ions can be manipulated by controlling the amount of the basic reagent. The production of biopolymer ions with low charge states results in a substantial improvement of sensitivity and reduced spectral congestion in ESI-MS. This is of importance for biopolymer mixture analysis and could have promising applications in proteomics.     

A collision cross-section database of singly-charged peptide ions

A database of ion-neutral collision cross-sections for singly-charged peptide ions is presented. The peptides included in the database were generated by enzymatic digestion of known proteins using three different enzymes, resulting in peptides that differ in terms of amino acid composition as well as N-terminal and C-terminal residues. The ion-neutral collision cross-sections were measured using ion mobility (IM) spectrometry that is directly coupled to a time-of-flight (TOF) mass spectrometer. The ions were formed by a matrix-assisted laser desorption ionization (MALDI) ion source operated at pressures (He bath gas) of 2 to 3 torr. The majority (63%) of the peptide ion collision cross-sections correlate well with structures that are best described as charge-solvated globules, but a significant number of the peptide ions exhibit collision cross-sections that are significantly larger or smaller than the average, globular mobility-mass correlation. Of the peptide ions having larger than average collision cross-sections, approximately 71% are derived from trypsin digestion (C-terminal Arg or Lys residues) and most of the peptide ions that have smaller (than globular) collision cross-sections are derived from pepsin digestion (90%).     

Tandem mass spectrometry of half-generation PAMAM dendrimer anions

Ions derived from negative electrospray ionization of polyamidoamine (PAMAM) dendrimer generation 0.5 were subjected to ion trap tandem mass spectrometry. Ion/ion proton transfer reactions were used to manipulate the charge states of PAMAM precursor ions to form lower charge states from those initially formed by electrospray, as well as to facilitate the interpretation of the product ion mass spectra. Most of the products derived from dendrimer precursor ions could be rationalized by retro-Michael decomposition reactions. The dominant fragmentation channels are highly dependent on the composition of the counter-ions, which in this case are restricted to different numbers of sodium ions and protons, and whether the precursor ion is multiply charged or singly charged. An interpretation is given that is consistent with all of the observations made with the various anions associated with this study. The nature of the structural information that can be obtained via ion trap tandem mass spectrometry of the dendrimers is dependent on the types of precursor ions subjected to study. The tandem mass spectrometry data also provided information about the structure of faulty synthesis products present in the PAMAM dendrimer sample.     

Tandem mass spectrometry of model peptides modified with trans-2-hexenal, a product of lipid peroxidation

Small molecules formed during lipid peroxidation can react with the basic groups in proteins through different mechanisms. Recently, substituted pyridinium moieties were observed during in vitro incubations of lysine-containing peptides with 2-alkenals. To explore the dissociation behavior of peptides with pyridinium-derivatized lysine residues, the peptide ions created through either matrix-assisted laser desorption/ionization or electrospray ionization were studied with tandem mass spectrometry. The permanently charged pyridinium ions fragment primarily through the charge-remote processes. Under high energy collision-induced dissociation, a number of diagnostic ions were observed that could potentially be used to identify modified residues in proteins. The origins of these ions were studied using deuterium exchange and higher-order mass spectrometry experiments using an ion trap instrument. Rational structures for these ions are proposed.     

Electrospray tandem mass spectrometry of new porphyrin amino acid conjugates

Porphyrin amino acid conjugates with one or two porphyrin units were analyzed by electrospray ionization tandem mass spectrometry (ESI-MS/MS). The ESI-MS spectra of all the porphyrins studied, obtained in positive ion mode, show the presence of the corresponding protonated molecule [M+H]+; ESI-MS spectra of diporphyrinyl compounds also show the doubly charged ions [M+2H]2+. The fragmentations of these ions induced by collision with argon were studied (ESI-MS/MS). ESI-MS/MS gives detailed structural information about the amino acids associated with the porphyrin. Cleavage of the bonds in the vicinity of the porphyrin moiety and those involving the side chain of amino acid residues gives structural information about this type of association. A fragmentation common to all derivatives corresponds to the cleavage of the phenyl-CO bond. The expected cleavage of the amide bond, that links the porphyrin to the amino acid moiety, is a minor fragmentation, which in some cases is even absent. The MS/MS spectra of the monoporphyrinyl derivatives show product ions characteristic of the amino acid linked to the porphyrin; the fragmentation also indicates when the amino acids has a terminal carboxylic group or a terminal ester group. The fragmentations of the diporphyrinyl compounds occur mainly by the cleavage of the spacer, leading, in the case of the doubly charged ions, to predominantly mono-charged ions, indicating a preferential location of the two protons in separated porphyrinic units.     

Electron ionization and electrospray mass spectra of diaryl-substituted enaminoketones and their thio analogs

Electron ionization (EI) and positive electrospray ionization (ESI) mass spectra of selected diaryl enaminoketones and enaminothiones have been studied. In the EI mass spectra of both classes of compound, molecular ion peaks are accompanied by the peaks corresponding to the [M-H](+) ions. The formation of these ions can be rationalized by a cyclization reaction resulting in the formation of the respective isoxazolium and isothiazolium cations. Under positive ESI conditions, in the spectra recorded for the enaminoketones peaks corresponding to the [M+H](+), [M+Na](+) and [2M+Na](+) ions appeared, while in the spectra recorded for the enaminothiones, peaks corresponding to the [M-H](+) ions were dominant. These ions are most likely formed by oxidation of the neutral enaminothione molecules on the surface of the positively charged stainless steel capillary in the ESI ion source (anodic oxidation).     

Electrospray ionization mass spectra of amino acid phosphoramidates of adenosine

Amino acid phosphoramidates of adenosine were synthesized and determined by positive and negative ion electrospray ionization mass spectrometry (ESI-MS) in conjunction with tandem mass spectrometry (MS/MS). The fragmentation pathways were investigated. In the positive ion mass spectra abundant characteristic fragment ions appeared, and many complementary ions were found. In the negative ion mass spectra only a few fragment ions were observed, and most of them contained phosphoryl groups. The results show that ESI-MS is a useful tool for structural determination of amino acid phosphoramidates of nucleosides.     

Protein structural effects in gas phase ion/molecule reactions with diethylamine.

The relationship between gas-phase protein structure and ion/molecule reactivity is explored in comparisons between native and disulfide-reduced aprotinin, lysozyme, and albumin. Reactions are performed in the atmospheric-pressure inlet to a quadrupole mass spectrometer employing a novel capillary interface-reactor. In reactions with equal concentrations of diethylamine, multiply protonated molecules generated by electrospray ionization (ESI) of 'native' proteins shifted to lower charge states than did multiply protonated molecules from ESI of the disulfide-reduced counterparts, suggesting that the disulfide-reduced protein ions are less reactive than native protein ions of the same charge state. Differences in reactivity may arise from protonation of different amino acid residues and/or differences in the proximities of charge sites in the two molecules. These results suggest that the reactivity of multiply charged proteins can be significantly affected by their gas-phase structure.     

Collision induced decomposition of peptides. Choice of collision parameters

Collision-induced dissociation product ion spectra of a series of doubly charged tryptic peptide ions produced by electrospray ionization were obtained by triple-quadrupole tandem mass spectrometry. The sequence information content of the product ion spectra was explored as a function of collision energy and collision-cell gas pressure for parent ions with molecular masses ranging from 300 to 2000 u. The energy range (at a given pressure) in which the degree of fragmentation is acceptable was found to be narrow for parent ions of a given mass, and the optimal collision energy was observed to exhibit a strong linear correlation with parent ion mass. This observed correlation opens the way for on-line software-controled selection of optimal mass spectrometric conditions in the enzymatic digestion-liquid chromatography-tandem mass spectrometric strategy of amino acid sequencing of proteins.     

Study of the dissociation of a charge-reduced phosphopeptide formed by electron transfer from an alkali metal target

Doubly protonated phosphopeptide (YGGMHRQET(p)VDC) ions obtained by electrospray ionization were collided with Xe and Cs targets to give singly and doubly charged positive ions via collision-induced dissociation (CID). The resulting ions were analyzed and detected by using an electrostatic analyzer (ESA). Whereas doubly charged fragment ions resulting from collisionally activated dissociation (CAD) were dominant in the CID spectrum with the Xe target, singly charged fragment ions resulting from electron transfer dissociation (ETD) were dominant in the CID spectrum with the Cs target. The most intense peak resulting from ETD was estimated to be associated with the charge-reduced ion with H2 lost from the precursor. Five c-type fragment ions with amino acid residues detached consecutively from the C-terminal were clearly observed without a loss of the phosphate group. These ions must be formed by N--Calpha bond cleavage, in a manner similar to the cases of electron capture dissociation (ECD) and ETD from negative ions. Although the accuracy in m/z of the CID spectra was about +/-1 Th because of the mass analysis using the ESA, it is supposed from the m/z values of the c-type ions that these ions were accompanied by the loss of a hydrogen atom. Four z-type (or y--NH3, or y--H2O) ions analogously detached consecutively from the N-terminal were also observed. The fragmentation processes took place within the time scale of 4.5 micros in the high-energy collision. The present results demonstrated that high-energy ETD with the alkali metal target allowed determination of the position of phosphorylation and the amino acid sequence of post-translational peptides.     

Reactions of poly(ethylene glycol) cations with iodide and perfluorocarbon anions

Multiply charged poly(ethylene glycol) ions of the form (M+nNa) ⁿ⁺ derived from electrospray ionization have been subjected to reactions with negative ions in the quadrupole ion trap. Mixtures of multiply charged positive ions ranging in average mass from about 2000 to about 14,000 Da were observed to react with perfluorocarbon anions by either proton transfer or fluoride transfer. Iodide anions reacted with the same positive ions by attachment. In no case was fragmentation of the polymer ion observed. In all cases, the multiply charged positive ion charge states could be readily reduced to +1, thereby eliminating the charge state overlap observed in the normal electrospray mass spectrum. With all three reaction mechanisms, however, the +1 product ions were comprised of mixtures of products with varying numbers of sodium ions, and in the case of iodide attachment and fluoride transfer, varying numbers of halogen anions. These reactions shift the mass distributions to higher masses and broaden the distributions. The extents to which these effects occur are functions of the magnitudes of the initial charges and the width of the initial charge state distributions. Care must be taken in deriving information about the polymer molecular weight distribution from the singly charged product ions arising from these ion/ion reactions. The cluster ions containing iodide were shown to be intermediates in sodium ion transfer. Dissociation of the adduct ions can therefore lead to a +1 product ion population that is comprised predominantly of M+Na⁺ ions. However, a strategy based on the dissociation of the iodide cluster ions is limited by difficulties in dissociating high mass-to-charge ions in the quadrupole ion trap.     

Redox buffering in an electrospray ion source using a copper capillary emitter.

An electrospray ion source used in electrospray mass spectrometry is a two-electrode, controlled-current electrochemical flow cell. Electrochemical reactions at the emitter electrode (oxidation and reduction in positive and negative ion modes respectively) provide the excess charge necessary for the quasi-continuous production of charged droplets and ultimately gas-phase ions with this device. We demonstrate here that a copper capillary emitter, in place of the more commonly used stainless-steel capillary emitter, can be utilized as a redox buffer in positive ion mode. Anodic corrosion of the copper capillary during normal operation liberates copper ions to solution and in so doing maintains the interfacial potential at this electrode near the equilibrium potential for the copper corrosion process [E degrees = 0.34 V versus standard hydrogen electrode (SHE)]. Fixing the interfacial potential at the emitter electrode provides control over the electrochemical reactions that take place at this electrode. It is shown that the oxidation of N-phenyl-1,4-phenylenediamine to N-phenyl-1,4-phenylenediimine (E(p/2) = 0.48 V versus SHE) can be completely avoided using the copper emitter, whereas this analyte is completely oxidized with a stainless-steel capillary emitter under the same conditions. Moreover, using N-phenyl-1,4-phenylenediimine, we demonstrate that reduction reactions can occur at the copper emitter electrode in positive ion mode. Emitter corrosion, in addition to redox buffering, provides a convenient means to introduce metal ions into solution for analytical use in electrospray mass spectrometry.     

Performance and Attributes of Liquid Chromatography–Mass Spectrometry with Targeted Charge Separation in Quantitative Analysis of Therapeutic Peptides

Herein we describe a new method, targeted enhanced multiply charged scans (tEMC), for the quantification of therapeutic peptides in tandem mass spectrometry on the linear ion trap mass spectrometer. Therapeutic peptides with chain lengths between eight and 39 amino acid residues and charge states from 2+ to 6+ were used to evaluate and illustrate the method which relies on the ability to separate ions trapped in a linear ion trap according to their charges. In particular, interference from singly charged ions on multiply charged ions can be effectively minimized. The method requires optimization of relatively few parameters, the most important of which being the exit lens barrier (EXB) voltage, thereby offering substantial time saving in a high-throughput quantification environment that currently relies on selected reaction monitoring.     

Photoionisation mass spectra of volatile derivatives of short peptides and appearance potentials of their characteristic ions

Mass spectra of the volatile derivatives of short peptides were studied by the photoionisation method with the use of monochromatic photons. The dependence of the intensity of the main peaks on the photon energy was analysed from 7·5 to 13·0 eV. The data obtain reveal the influence of the chemical structure of amino acid residues on the relative probability of the decomposition of peptide molecular ions at the CH? CO and CO? NH bonds, resulting in the formation of positively charged aldimine and amino acid N-terminal fragments, respectively. These data may be used as a basis for the application of the photoionisation technique to mass spectrometric sequential studies in peptides. In peptides containing residues of aliphatic amino acid the decomposition results mainly in the formation of aldimine ions, the stability of which increase with the increase of the alkyl chain size. In peptides containing residues of aromatic amino acids the decomposition is usually observed leading to formation of the amino acid ions. Ionisation potentials, as well as photoionisation efficiency curves and appearance potentials were determined for characteristic ions. Comparison was made of the values of the appearance potentials of different fragments formed upon decomposition of molecular ions. It has been shown that for peptides containing aliphatic amino acid moieties the appearance potentials of aldimine fragments are always lower than those inherent to peptides containing aromatic amino acid residues. The larger the size of an aliphatic chain, the lower is the energy of formation of these fragments. For all the compounds studied, including the peptides containing aromatic amino acid residues, the appearance potentials of the aldimine ions did not exceed those of the amino acid ions. These data indicate that, contrary to the experiments with electron-impact with energy of about 70 eV, upon ionisation with photons with energy from 7·5 to 13·0 eV, the aldimine fragments appear directly due to primary decomposition of molecular ions, independent of the formation of the amino acid fragments. The photoionisation efficiency curves for peptides containing different types of amino acid residues facilitate the choice of an optimal photon energy providing unequivocal information on the amino acid sequence in the peptide under study.     

Is droplet evaporation crucial in the mechanism of electrospray mass spectrometry?

Evaporation of solvent from charged droplets was found not to be a prerequisite to ion desorption in electrospray mass spectrometry. Evidence of evaporation was absent in an examination of the electrospray mass spectral profiles of cytochrome c and myoglobin in 0.2% acetic and propionic acid solutions; the pHs of these two acid solutions are expected to change in opposite directions with evaporation. The results strongly suggest that ions, as observed in electrospray mass spectrometry, are desorbed from solutions that have undergone minimal evaporation, in other words, at the beginning rather than later parts of the electrospray process. It is speculated that ions are desorbed directly from the solution-air interface at the needle tip.