Derivatization of synthetic polymers in mass spectrometric studies

The review describes various derivatization approaches employed for the investigation of synthetic polymers by mild ionization mass spectrometry (fast atom and ion bombardment, matrix-assisted laser desorption/ionization, electrospray/ionization). The potentials of chemical methods for modification of end- and side-chain functional groups without the decomposition of molecules are demonstrated. Methods of the preliminary chemical degradation of polymer molecules for the investigation of their microstructure are considered. The possibilities of the chemical modification of polymer surfaces for the identification and quantitative determination of functionalized fragments are shown.     

Tandem mass spectrometry of synthetic polymers

The detailed characterization of macromolecules plays an important role for synthetic chemists to define and specify the structure and properties of the successfully synthesized polymers. The search for new characterization techniques for polymers is essential for the continuation of the development of improved synthesis methods. The application of tandem mass spectrometry for the detailed characterization of synthetic polymers using the soft ionization techniques matrix‐assisted laser desorption/ionization mass spectrometry (MALDI‐MS) and electrospray ionization mass spectrometry (ESI‐MS), which became the basic tools in proteomics, has greatly been increased in recent years and is summarized in this perspective. Examples of a variety of homopolymers, such as poly(methyl methacrylate), poly(ethylene glycol), as well as copolymers, e.g. copolyesters, are given. The advanced mass spectrometric techniques described in this review will presumably become one of the basic tools in polymer chemistry in the near future. Copyright © 2009 John Wiley & Sons, Ltd.     

Optimized sample preparation for MALDI mass spectrometry analysis of protected synthetic peptides

The recent development and commercialization of Fuzeon (enfuvirtide) demonstrated that a convergent strategy comprised of both solid- and solution-phase synthetic methodologies presents a viable route for peptide manufacturing on a multi-ton scale. In this strategy, the target sequence is prepared by stepwise solid-phase synthesis of protected peptide fragments, which are then coupled together in the solution-phase to give the full-length sequence. These synthetic methodologies pose a unique challenge for mass spectrometry (MS), as protected peptide intermediates are often marked by poor solubility, structural lability, and low ionization potential. Matrix-assisted laser desorption/ionization (MALDI) MS is uniquely suited to such analytes; however, generalized protocols for MALDI analysis of protected peptides have yet to be demonstrated. Herein, we report an operationally simple sample preparation method for MALDI analysis of protected peptides, which greatly facilitates the collection and interpretation of MS data. In this method, the difficulty in MS analysis of protected peptides has been greatly diminished by use of dithranol as a matrix and CsCl as an additive, giving rise to intentionally-formed Cs(+) adducts. With greatly reduced fragmentation, better crystalline morphology, and easier data interpretation, we anticipate that these findings will find utility in peptide process development and manufacturing settings for reaction monitoring, troubleshooting, and quality control.     

氨基酸-稳定同位素稀释质谱法用于合成肽段准确含量分析

建立了氨基酸同位素稀释液相色谱-串联质谱法准确测定合成肽段绝对含量的方法。实验中对合成肽段的纯度进行了表征,色谱纯度表征结果为99%以上,质谱纯度为90%以上。在肽段溶液中加入13C标记的氨基酸后进行酸溶液水解时间的优化,水解后的氨基酸直接经液相色谱分离和质谱检测,结果表明肽段中的被测氨基酸在150 ℃、6 mol/L HCl溶液水解4～6 h就可以达到水解平衡。每个肽段选择两个或两个以上的被测氨基酸,测得随机选择的5种合成肽段的绝对含量为62.07%～88.18%,测定结果的相对标准偏差小于8%,相对误差小于5%,均满足定量要求。除常用的被测氨基酸苯丙氨酸、缬氨酸、异亮氨酸外,还考察了选择赖氨酸和精氨酸作为被测氨基酸的可行性,实验结果表明增加精氨酸为被测氨基酸是可行的,从而进一步增加了方法的普适性。该方法的建立避免了色谱法定量时氨基酸衍生化处理带来的副反应影响及操作繁琐等问题,提高了肽段含量测定的准确度和精密度,为肽段含量的准确测定提供了一种新的方法。     

Desorption electrospray ionisation mass spectrometry and tandem mass spectrometry of low molecular weight synthetic polymers

A range of low molecular weight synthetic polymers has been characterised by means of desorption electrospray ionisation (DESI) combined with both mass spectrometry (MS) and tandem mass spectrometry (MS/MS). Accurate mass experiments were used to aid the structural determination of some of the oligomeric materials. The polymers analysed were poly(ethylene glycol) (PEG), polypropylene glycol (PPG), poly(methyl methacrylate) (PMMA) and poly(alpha-methyl styrene). An application of the technique for characterisation of a polymer used as part of an active ingredient in a pharmaceutical tablet is described. The mass spectra and tandem mass spectra of all of the polymers were obtained in seconds, indicating the sensitivity of the technique.     

Rapid fingerprinting of red wines by MALDI mass spectrometry

Here we report a simple and fast method for wine fingerprinting based on direct matrix-assisted laser desorption/ionization (MALDI) mass spectrometry analysis of different red wine samples, useful for batch-to-batch analysis and for the detection of key compounds even in trace amounts which may vary from vintage to vintage, and from one treatment to another one. A series of 20 samples from different wines were subjected to MALDI mass spectrometry. We found that 2,5-dihydroxybenzoic acid is far superior with respect to all the matrices tested To the best of our knowledge this is the first application of an effective wine profiling not limited to detection of anthocyanins. More than 80 molecular species were detected. Moreover, qualitative and quantitative differences were observed, owing to the nature and relative abundance of different chemical compounds among the wines.     

Coating of nanoparticles bearing amino groups on the surface with hydrophilic HPMA-based polymers

Two hydrophilic polymer systems, multivalent N-(2-hydroxypropyl)methacrylamide-based copolymers bearing thiazolidine-2-thione (TT) reactive groups randomly distributed along the polymer chain and monovalent semitelechelic pHPMA with the TT end group, were designed for surface modification of gene delivery vectors, namely, DNA polyelectrolyte complexes (PECs) and adenoviruses. In this study, the amino group-modified polystyrene latex nanoparticles were selected as a suitable model of a nanoparticulate delivery system bearing NH₂ groups on the surface. The coating process was monitored by changes in molecular weight and hydrodynamic parameters of the nanoparticles by light scattering methods. It was shown that for study of the coating process the model latex particles are more suitable than the original PEC vectors due to better chemical and physical stability of latexes. The results obtained in the model study (reaction conditions, methods of evaluation) suggest an optimal polymer structure and a method of efficient and complete coating of nanoparticle surface well applicable to the real gene delivery vectors.     

Sequence of polymers by mass spectrometry

Mass Spectrometry, being able to look at the mass of individual molecules in a mixture of homologues, is particularly suitable for the detection of a series of oligomers. However, mass spectra had not been exploited to estimate oligomers distributions, due to the diffuse notion that a lack of correlation existed between peak intensities and concentration of the oligomers in the mixture. The introduction of soft-ionization techniques has largely eliminated this problem. A novel method for the determination of the microstructure of copolymers is presented here. We have recently found that opportune decoding of the information contained in the mass spectral intensities leads to the determination of composition and microstructure in copolymers, and this represents a significant progress. Statistical modeling of the mass spectral intensities of copolymers has been used to derive information on the distribution of monomers along the copolymer chain, and an automated procedure to find the composition and the sequence of the copolymers analyzed has been developed. The statistical analysis of copolymers makes use of Bernoullian and Markovian models in order to characterize the microstructure of copolymer samples, and assuming a theoretical distribution and then fitting the calculated oligomer abundances with the experimental MS peak intensities, the copolymer composition can be determined. A method is also reported to obtain the copolymer conposition by direct analysis of the mass spectra. These theories have been applied to determine the composition and the microstructure of several copolymers whose mass spectra have been reported in the most recent literature.     

A sialylation study of mouse brain gangliosides by MALDI a-TOF and o-TOF mass spectrometry

Matrix-assisted laser desorption/ionization (MALDI) process of sialoglycoconjugates is generally accompanied by different levels of cleavage of sialic acid residues and/or by dehydration, and decarboxylation reactions. Quantitative densitometry of the mouse brain ganglioside (MBG) components separated by high-performance thin layer chromatography (HPTLC) and evidenced by orcinol staining was a basis to verify the ganglioside composition pattern with respect to the relative abundances of individual components in the mixture. A systematic mass spectrometry (MS) sialylation analysis has been carried out to evaluate the feasibility of an axial time-of-flight (a-TOF) MS, equipped with a vacuum MALDI source and an orthogonal-TOF (o-TOF) instrument with an ion source operated at about 1 mbar of N(2). Besides, the esterification by one methyl group of the carboxyl group in sialic acid to increase the stability of the ganglioside species for MALDI MS analysis has been tested and the yield of intact ganglioside species and of the neutral loss of water and carbon dioxide estimated. For the sialylation analysis of native ganglioside mixtures the MALDI o-TOF analysis with 6-azo-2-thiothymine/diammonium citrate (ATT/DAC) as a matrix appears as an optimal approach for ganglioside profiling.     

Direct mass spectrometry of polymers. XIV. Thermal fragmentation processes in poly-schiff bases

The thermal fragmentation processes in poly-Schiff bases have been investigated by direct pyrolysis–mass spectrometry. The mass spectral data show that the thermal fragmentation occurring in the polymers under investigation is characterized by hydrogen transfer reactions. In the case of a totally aromatic poly-Schiff base (polymer I ), the thermal fragmentation process involves hydrogen transfer irom the methyne group with formation of fragments bearing nitrile and/or phenyl end groups. In the case of aromatic-aliphatic poly-Schiff bases (polymers II–IV ), the hydrogen transfer process occurs from the aliphatic methylene groups. The latter process involves a lower energy and therefore occurs at lower temperatures with respect to the totally aromatic polymer I , with formation of thermal fragments bearing olefin and/or imine end groups. Beside these fragments, several thermal fragmentation compounds are also evolved by multiple hydrogen transfer reactions.     

Endgroup determination of synthetic polymers by electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry

Electrospray ionization (ESI) was performed on a Fourier transform ion cyclotron resonance mass spectrometer for the endgroup and monomer mass determination of three poly(oxyalkylene)s in the mass range of 400–8000 Da. A combined use of the multiple charge states observed with ESI, leads to a threefold increase in accuracy of the endgroup and monomer determination. The improvement is attributed to the increased number of datapoints used for the regression procedure, yielding more accurate results. Endgroup masses are determined with a mass error better than 5 and 75 millimass units for the molecular weight range of 400–4200 and 6200–8000 Da, respectively. A mass error of better than 1 millimass unit was observed for all monomer mass determinations. With ESI, endgroup and monomer masses have been determined for poly(ethylene glycol) oligomers with a mass higher than 8000 Da. This is almost two times higher than observed with matrix-assisted laser desorption/ ionization on the same instrument.     

The analysis of industrial synthetic polymers by electrospray droplet impact/secondary ion mass spectrometry

Electrospray droplet impact (EDI)/secondary ion mass spectrometry (SIMS) is a new desorption/ionization technique for mass spectrometry in which highly charged water clusters produced from the atmospheric‐pressure electrospray are accelerated in vacuum by several kV and impact the sample deposited on the metal substrate. In this study, several industrial synthetic polymers, e.g. polystyrene (PS) and polyethylene glycol (PEG) were analyzed by EDI/SIMS mass spectrometry. For higher molecular weight analytes, e.g. PS4000 and PEG4600, EDI/SIMS mass spectra could be obtained when cationization salts are added. For the polymers of lower molecular weights, e.g. PEG300 and PEG600, they could be readily detected as protonated ions without the addition of cationization agents. Anionized PS was also observed in the negative ion mode of operation when acetic acid was added to the charged droplet. Compared to matrix‐assisted laser desorption/ionization (MALDI), ion signal distribution with lower background signals could be obtained particularly for the low‐molecular weight polymers. Copyright © 2009 John Wiley & Sons, Ltd.     

Elucidating dynamic behavior of synthetic supramolecular polymers in water by hydrogen/deuterium exchange mass spectrometry

A comprehensive understanding of the structure, self-assembly mechanism, and dynamics of one-dimensional supramolecular polymers in water is essential for their application as biomaterials. Although a plethora of techniques are available to study the first two properties, there is a paucity in possibilities to study dynamic exchange of monomers between supramolecular polymers in solution. We recently introduced hydrogen/deuterium exchange mass spectrometry (HDX-MS) to characterize the dynamic nature of synthetic supramolecular polymers with only a minimal perturbation of the chemical structure. To further expand the application of this powerful technique some essential experimental aspects have been reaffirmed and the technique has been applied to a diverse library of assemblies. HDX-MS is widely applicable if there are exchangeable hydrogen atoms protected from direct contact with the solvent and if the monomer concentration is sufficiently high to ensure the presence of supramolecular polymers during dilution. In addition, we demonstrate that the kinetic behavior as probed by HDX-MS is influenced by the internal order within the supramolecular polymers and by the self-assembly mechanism.     

Silver cluster interferences in matrix-assisted laser desorption/ionization (MALDI) mass spectrometry of nonpolar polymers

Potential difficulties associated with background silver salt clusters during matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) of nonpolar polymers are reported. Silver salt cluster ions were observed from m/z 1500 to 7000 when acidic, polar matrices, such as 2,5-dihydroxybenzoic acid (DHB), all-trans-retinoic acid (RTA) or 2-(4-hydroxyphenylazo)benzoic acid (HABA), were used for the analysis of nonpolar polymers. These background signals could be greatly reduced or eliminated by the use of nonpolar matrices such as anthracene or pyrene. Representative examples of these background interferences are demonstrated during the analysis of low molecular weight nonpolar polymers including polybutadiene and polystyrene. Nonpolar polymers analyzed with acidic, polar matrices (e.g., RTA) and silver cationization reagents can yield lower quality mass spectral results when interferences due to silver clusters are present. Replacing the polar matrices with nonpolar matrices or the silver salts with copper salts substantially improved the quality of the analytical results. In addition, it was found that silver contamination cannot be completely removed from standard stainless steel sample plates, although the presence of silver contamination was greatly reduced after thorough cleaning of the sample plate with aluminum oxide grit. Carry-over silver may cationize polymer samples and complicate the interpretation of data obtained using nonpolar matrices in the absence of added cationization reagents.     

Identification of oligosaccharides from histopathological sections by MALDI imaging mass spectrometry

Direct tissue analysis using matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) provides the means for in situ molecular analysis of a wide variety of biomolecules. This technology—known as imaging mass spectrometry (IMS)—allows the measurement of biomolecules in their native biological environments without the need for target-specific reagents such as antibodies. In this study, we applied the IMS technique to formalin-fixed paraffin-embedded samples to identify a substance(s) responsible for the intestinal obstruction caused by an unidentified foreign body. In advance of IMS analysis, some pretreatments were applied. After the deparaffinization of sections, samples were subjected to enzyme digestion. The sections co-crystallized with matrix were desorbed and ionized by a laser pulse with scanning. A combination of α-amylase digestion and the 2,5-dihydroxybenzoic acid matrix gave the best mass spectrum. With the IMS Convolution software which we developed, we could automatically extract meaningful signals from the IMS datasets. The representative peak values were m/z 1,013, 1,175, 1,337, 1,499, 1,661, 1,823, and 1,985. Thus, it was revealed that the material was polymer with a 162-Da unit size, calculated from the even intervals. In comparison with the mass spectra of the histopathological specimen and authentic materials, the main component coincided with amylopectin rather than amylose. Tandem MS analysis proved that the main components were oligosaccharides. Finally, we confirmed the identification of amylopectin by staining with periodic acid-Schiff and iodine. These results for the first time show the advantages of MALDI-IMS in combination with enzyme digestion for the direct analysis of oligosaccharides as a major component of histopathological samples.     

Direct analysis of laser capture microdissected cells by MALDI mass spectrometry

Laser capture microdissection (LCM) has become an important tool in biological research, permitting isolation of specific cell populations from frozen tissue samples containing a mixture of cell types. Cells obtained by LCM can be directly analyzed by matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS). We report here methodology for the preparation and analysis of LCM captured cells with MALDI MS, giving high sensitivity and mass resolution. Comparison of the spectra obtained from cell populations of interest can identify unique disease or function-related protein markers. Using this approach, mass spectra obtained from human breast tissue containing invasive mammary carcinoma and normal breast epithelium using LCM were compared. Over 40 peaks were identified that significantly differed in intensity between invasive mammary carcinoma and normal breast epithelium. In addition, mass spectra are presented that show protein patterns from mouse liver and mouse colon crypts. The reported tissue preparation procedure and subsequent analysis by MALDI MS provide a new methodology for protein discovery involving LCM captured cells.     

Ultra-thin layer MALDI mass spectrometry of membrane proteins in nanodiscs

Nanodiscs have become a leading technology to solubilize membrane proteins for biophysical, enzymatic, and structural investigations. Nanodiscs are nanoscale, discoidal lipid bilayers surrounded by an amphipathic membrane scaffold protein (MSP) belt. A variety of analytical tools has been applied to membrane proteins in nanodiscs, including several recent mass spectrometry studies. Mass spectrometry of full-length proteins is an important technique for analyzing protein modifications, for structural studies, and for identification of proteins present in binding assays. However, traditional matrix-assisted laser desorption/ionization-time-of-flight (MALDI-TOF) mass spectrometry methods for analyzing full-length membrane proteins solubilized in nanodiscs are limited by strong signal from the MSP belt and weak signal from the membrane protein inside the nanodisc. Herein, we show that an optimized ultra-thin layer MALDI sample preparation technique dramatically enhances the membrane protein signal and nearly completely eliminates the MSP signal. First-shot MALDI and MALDI imaging are used to characterize the spots formed by the ultra-thin layer method. Furthermore, the membrane protein enhancement and MSP suppression are shown to be independent of the type of membrane protein and are applicable to mixtures of membrane proteins in nanodiscs.