Invertase production on solid-state fermentation by Aspergillus niger strains improved by parasexual recombination

Invertase production by Aspergillus niger grown by solid-state fermentation was found to be higher than by conventional submerged fermentation. The haploid mutant strains Aw96-3 and Aw96-4 showed better productivity of various enzymes, as compared to wild-type parental strain A. niger C28B25. Here we use parasexual crosses of those mutants to increase further the productivity of invertase in solid-state fermentation. We isolated both a diploid (DAR2) and an autodiploid (AD96-4) strain, which were able to grow in minimal medium after mutation complementation of previously isolated haploid auxotrophic strains. Invertase production was measured in solid-state fermentation cultures, using polyurethane foam as an inert support for fungal growth. Water activity value (Aw) was adjusted to 0.96, since low Aw values are characteristic in some solid-state fermentation processes. Such diploid strains showed invertase productivity levels 5–18 times higher than levels achieved by the corresponding haploid strains. For instance, values for C28B25, Aw96-3, Aw96-4, DAR2, and AD96-4 were 441, 254, 62, 1324, and 2677 IU/(L·h), respectively. These results showed that genetic recombination, achieved through parasexual crosses in A. niger, results in improved strains with potential applications for solid-state fermentation processes.     

Solid-state fermentation with Aspergillus niger for cellobiase production

Aspergillus niger NRRL3 was cultivated in a moist wheat bran and ground corncob solid medium supplemented with inorganic minerals for the production of cellobiase (β-1,4-glucosidase, EC 3.2.1.21). With this method, A. niger NRRL3 was able to produce a high concentration of cellobiase (215 IU/gofsolid substrate) after 96 h of incubation. Temperature and moisture content affected final cellobiase titers. The best conditions for cell obiase production from solid substrate by A. niger NRRL3 were determined to be 70% moisture and 35°C.     

Enzyme production and profile by Aspergillus niger during solid substrate fermentation using palm kernel cake as substrate

The oil palm sector is one of the major plantation industries in Malaysia. Palm kernel cake is a byproduct of extracted palm kernel oil. Mostly palm kernel cake is wasted or is mixed with other nutrients and used as animal feed, especially for ruminant animals. Recently, palm kernel cake has been identified as an important ingredient for the formulation of animal feed, and it is also exported especially to Europe, South Korea, and Japan. It can barely be consumed by nonruminant (monogastric) animals owing to the high percentages of hemicellulose and cellulose contents. Palm kernel cake must undergo suitable pretreatment in order to decrease the percentage of hemicellulose and cellulose. One of the methods employed in this study is fermentation with microorganisms, particularly fungi, to partially degrade the hemicellulose and cellulose content. This work focused on the production of enzymes by Aspergillus niger and profiling using palm kernel cake as carbon source.     

Effect of operating conditions on biomass growth during citric acid production by solid-state fermentation

The effect of aeration, agitation, and bed loading on biomass and product concentration during citric acid biosynthesis by solid-state fermentation was investigated. For this purpose, Aspergillus niger S was cultivated on sugar beet pulp in a 4.5 dm³ horizontal rotating drum bioreactor. The results suggest that the parameters examined have a remarkable effect on the quantity of biomass being formed and on the product concentration. The maximum citric acid production (about 150 g per kg of the substrate dry matter) was obtained under the following conditions: aeration rate 0.2 dm³ kg⁻¹ min⁻¹, mixing (periodical) 1 min once an hour, and bed loading 30 % of the bioreactor working volume. However, these values did not favour biomass formation. Moreover, it was found that accumulation of the product reached its maximum when the amount of biomass was minimal (approximately 252-29 g per kg of the substrate dry matter) under the conditions involved. Presented at the 34th International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 21–25 May 2007.     

Optimization of glucoamylase production by Aspergillus niger in solid-state fermentation

Glucoamylase production by Aspergillus niger in solid-state fermentation was optimized using factorial design and response surface techniques. The variables evaluated were pH and bed thickness in tray, having as response enzyme production and productivity. The bed thickness in tray was the most significant variable for both responses. The highest values for glucoamylase production occurred using pH 4.5 and bed thickness in the inferior limits at 2.0-4.2 cm. For productivity, the optimal conditions were at pH 4.5 as well and bed thickness from 4.4 to 7.5 cm. The optimal conditions for glucoamylase production while obtaining high activity without loss of productivity were pH 4.5 and bed thickness in tray from 4.0 to 4.5 cm, which resulted in an enzyme production of 695 U/g and productivity of 5791 U/h.     

Culture conditions dictate protease and tannase production in submerged and solid-state cultures of Aspergillus niger Aa-20

Undesirable protease production by Aspergillus niger Aa-20 in submerged culture and solid-state culture was evaluated using different concentrations of tannic acid as sole carbon source in a model system designed for tannase production. Protease production was found to be dependent on the culture system used (submerged culture or solid-state culture) and on the initial tannic acid concentration. Expression of protease activity in submerged culture was higher (up to 10 times) than activity obtained in solid-state culture, using identical culture medium composition. In submerged culture, the lowest final protease activity (0.13 IU) was obtained with the highest tannic acid concentration, while in solid-state culture protease activity was not affected by changes in initial substrate concentration. Absence of detectable proteolytic activity in solid-state culture is related to high production of tannase enzyme. Hence, the use of solid-state culture for fungal enzyme production may allow for higher and more stable enzyme titers present in culture extracts.     

Xylanase production by Aspergillus awamori in solid-state fermentation and influence of different nitrogen sources

The use of purified xylan as a substrate for bioconversion into xylanases increases the cost of enzyme production. Consequently, there have been attempts to develop a bioprocess to produce such enzymes using different lignocellulosic residues. Filamentous fungi have been widely used to produce hydrolytic enzymes for industrial applications, including xylanases, whose levels in fungi are generally much higher than those in yeast and bacteria. Considering the industrial importance of xylanases, the present study evaluated the use of milled sugarcane bagasse, without any pretreatment, as a carbon source. Also, the effect of different nitrogen sources and the C∶N ratio on xylanase production by Aspergillus awamori were investigated, in experiments carried out in solid-state fermentation. High extracellular xylanolytic activity was observed on cultivation of A. awamori on milled sugarcane bagasse and organic nitrogen sources (45 IU/mL for endoxylanase and 3.5 IU/mL for β-xylosidase). Endoxylanase and β-xylosidase activities were higher when sodium nitrate was used as the nitrogen source, when compared with peptone, urea, and ammonium sulfate at the optimized C∶N ratio of 10∶1. The use of yeast extract as a supplement to the these nitrogen sources resulted in considerable improvementin the production of xylanases, showing the importance of this organic nitrogen source on A. awamori metabolism.     

Effect of span 20 concentration on oxalic acid production from post-refining fatty acids by Aspergillus niger XP

Submerged fermentation experiments were carried out to study the stimulating effects of the surfactant Span 20 on the growth of Aspergillus niger XP mutant and oxalic acid production from the post-refining fatty acids. Span 20 concentration of 0.75 g dm⁻³ was found to be the most suitable for oxalic acid production from fatty acids. Using this dose and a fermentation medium containing 30 g dm⁻³ of post-refining fatty acids, the oxalic acid production, oxalate yield, and overall oxalate productivity were the highest. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

High-yield bacillus subtilis protease production by solid-state fermentation

A Bacillus subtilis isolate was shown to be able to produce extracellular protease in solid-state fermentations (SSF) using soy cake as culture medium. A significant effect of inoculum concentration and physiological age on protease production was observed. Maximum activities were obtained for inocula consisting of exponentially growing cells at inoculum concentrations in the range of 0.7–2.0 mg g⁻¹. A comparative study on the influence of cultivation temperature and initial medium pH on protease production in SSF and in submerged fermentation (SF) revealed that in SSF a broader pH range (5–10), but the same optimum temperature (37°C), is obtained when compared to SF. A kinetic study showed that enzyme production is associated with bacterial growth and that enzyme inactivation begins before biomass reaches a maximum level for both SF and SSF. Maximum protease activity and productivity were 960 U g⁻¹ and 15.4 U g⁻¹ h⁻¹ for SSF, and 12 U mL⁻¹ and 1.3 U mL⁻¹ h⁻¹ for SF. When SSF protease activity was expressed by volume of enzyme extract, the enzyme level was 10-fold higher and the enzyme productivity 45% higher than in SF. These results indicate that this bacterial strain shows a high biotechnological potential for protease production in solid-state fermentation.     

Mutagenesis and analysis of mold Aspergillus niger for extracellular glucose oxidase production using sugarcane molasses

Aspergillus niger ORS-4.410, a mutant of A. niger ORS-4, was generated by repeated ultraviolet (UV) irradiation. Analysis of the UV treatment dose on wild-type (WT) A. niger ORS-4, conidial survival, and frequency of mutation showed that the maximum frequency of positive mutants (25.5%) was obtained with a 57% conidial survival rate after the second stage of UV irradiation. The level of glucose oxidase (GOX) production from mutant A. niger ORS-4.410 thus obtained was 149% higher than that for WT strain A. niger ORS-4 under liquid culture conditions using hexacyanoferrate (HCF)-treated sugarcane molasses (TM) as a cheaper carbohydrate source. When subcultured monthly for 24 mo, the mutant strain had consistent levels of GOX production (2.62±0.51 U/mL). Mutant A. niger ORS-4.410 was markedly different from the parent strain morphologically and was found to grow abundantly on sugarcane molasses. The mutant strain showed 3.43-fold increases in GOX levels (2.62±0.51 U/mL) using HCF-TM compared with the crude form of cane molasses (0.762±0.158 U/mL). The results reported herein were obtained while the author was working at the Department of Biotechnology, Indian Institute of Technology, Roorkee-247667, India.     

Xylanase production by the thermophilic mold Humicola lanuginosa in solid-state fermentation

Among the lignocellulosic substrates tested, wheat bran supported a high xylanase (EC 3.2.1.8) secretion by Humicola lanuginosa in solid-state fermentation (SSF). Enzyme production reached a peak in 72 h followed by a decline thereafter. Enzyme production was very high (7832 U/g of dry moldy bran) when wheat bran was moistened with tap water at a substrate-to-moistening agent ratio of 1:2.5 (w/v) and an inoculum level of 3 × 10⁶ spores/10 g of wheat bran at a water activity (a _w ) of 0.95. Cultivation of the mold in large enamel trays yielded a xylanase titer comparable with that in flasks. Parametric optimization resulted in a 31% increase in enzyme production in SSF. Xylanase production was approx 23-fold higher in SSF than in submerged fermentation (SmF). A threshold constitutive level of xylanase was secreted by H. lanuginosa in a medium containing glucose as the sole carbon source. The enzyme was induced by xylose and xylan. Enzyme synthesis was repressed beyond 1.0% (w/v) xylose in SmF, whereas it was unaffected up to 3.0% (w/w) in SSF, suggesting a minimization of catabolite repression in SSF.     

Relationship between coffee husk caffeine degradation and respiration of Aspergillus sp. LPBx in solid-state fermentation

Studies were carried out in a packed-bed column fermentor using coffee husk as substrate in order to verify a relationship between caffeine degradation and the respiration of Aspergillus sp. LPBx. Fermentation conditions were optimized by using factorial design experiments. The kinetic study showed that the caffeine degradation was related to the development of mold and its respiration and also with the consumption of reducing sugars present in coffee husk. From the values obtained experimentally for oxygen uptake rate and CO₂ evolved, we determined a biomass yield of 3.811 g of biomass/g of consumed O₂ and a maintenance coefficient of 0.0031 g of consumed O₂/(g of biomass·h). The maximum caffeine degradation achieved was 90%.     

Purification and properties of three cellobiases from Aspergillus niger A20

Three cellobiases, here called cellobiase A, B, and C, from the culture filtrate of Aspergillus niger A20, were purified by precipitation with ammonium sulphate, gel filtration through Sephadex G-75, and column chromatography of DEAE-cellulose. The purified enzymes were homogeneous on polyacrylamide disk electrophoresis. The mol wt of the purified enzymes were estimated by SDS-gelelectrophoresis to be 88,000, 80,000, and 71,000 for cellobiases A, B, and C, respectively. The enzymes were active at pH 4.5 and 55–60°C. The pattern of their aminoacid compositions showed high contents of aspartic acid, glutamic acid, threonine, serine, and glycine. The apparent K_m values for cellobiose were 0.9, 1.63, and 1.0 mM for cellobiases A, B, and C, respectively. Calcium ions stimulated cellobiases B and C, and Co²⁺ and Mg²⁺ ions stimulated cell obiase A. The purified enzymes hydrolyzed cellobiose and aryl-β-d-glucosides, but they had no action on sucrose, maltose, and cellulose. The three cellobiases catalyzed transglycosylate reaction, and the major product formed from cellobiose was tetramer of glucose.     

Optimization of ammonium nitrate concentration in single-stage continuous cultures of Aspergillus niger with biomass retention

The effect of ammonium nitrate concentration in the citric acid biosynthesis by Aspergillus niger NC-12 in single-stage continuous cultures with biomass retention was investigated. Experiments were carried out in a BIOMER laboratory fermenter with 5 dm³ working volume. At the initial stage of each cultivation, the substrate in the bioreactor contained 1.5 g NH₄NO₃ dm⁻³. After 120 h onwards, the bioreactor was fed continuously at a constant dilution rate of 0.009 h⁻¹. NH₄NO₃ concentration in the feed was varied from one culture to another, ranging between 0.5 g dm⁻³ and 2.5 g dm⁻³. Promising results were obtained when NH₄NO₃ concentration of 1.5 g dm⁻³ was used. The observed concentration of citric acid (c _P) and yield of citric acid with respect to the introduced sucrose (Y _P/S) were 117.88 g dm⁻³ and 78.59 %, respectively. The efficiency coefficient of citric acid biosynthesis (K _ef) was very high, amounting to 83.38. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Microencapsulated mycelium-bound tannase from Aspergillus niger

Microencapsulated Aspergillus niger with mycelium-bound tannase activity was employed to investigate the esterification of propyl gallate from gallic acid and propanol in organic solvents. The effects of various organic solvents (log P:−1.0 to 6.6) on the enzymatic reactions showed that benzene (log P:2.0) was the suitable solvent, for which the conversion reached 26.8%. The optimum catalyst concentration and water concentration was found at 25 capsules in 10 mL of benzene and 0.04 g of water/capsule. The external mass transfer effect could be eliminated at stirring speeds of 180 rpm or higher. Both substrates 1-propanol and gallic acid had significant inhibition effects on the tannase activity. Maximum molar conversion (36.2%) was achieved with 9.1% (v/v) 1-propanol and 8 mM gallic acid and decreased with increasing amounts of substrates.     

Enhanced production of xylanase from locally isolated fungal strain using agro-industrial residues under solid-state fermentation

This study is related to the isolation of fungal strain for xylanase production using agro-industrial residues. Forty fungal strains with xylanolytic potential were isolated by using xylan agar plates and quantitatively screened in solid-state fermentation. Of all the tested isolates, the strain showing highest ability to produce xylanase was assigned the code Aspergillus niger LCBT-14. For the enhanced production of the enzyme, five different fermentation media were evaluated. Out of all media, M4 containing wheat bran gave maximum enzyme production. Effect of different variables including incubation time, temperature, pH, carbon and nitrogen sources has been investigated. The optimum enzyme production was obtained after 72 h at 30°C and pH 4. Glucose as a carbon source while ammonium sulphate and yeast extract as nitrogen sources gave maximum xylanase production (946 U/mL/min). This study was successful in producing xylanase by A. niger LCBT-14 economically by utilising cheap indigenous substrate.     

Heterologous expression of Trametes versicolor laccase in Pichia pastoris and Aspergillus niger

Convenient expression systems for efficient heterologous production of different laccases are needed for their characterization and application. The laccase cDNAs lcc1 and lcc2 from Trametes versicolor were expressed in Pichia pastoris and Aspergillus niger under control of their respective glyceraldehyde-3-phosphate dehydrogenase promoters and with the native secretion signal directing catalytically active laccase to the medium. P. pastoris batch cultures in shake-flasks gave higher volumetric activity (1.3 U/L) and a better activity to biomass ratio with glucose than with glycerol or maltose as carbon source. Preliminary experiments with fed-batch cultures of P. pastoris in bioreactors yielded higher activity (2.8 U/L) than the shake-flask experiments, although the levels remained moderate and useful primarily for screening purposes. With A. niger, high levels of laccase (2700 U/L) were produced using a minimal medium containing sucrose and yeast extract. Recombinant laccase from A. nigher harboring the lcc2 cDNA was purified to homogeneity and it was found to be a 70-kDa homogeneous enzyme with biochemical and catalytic properties similar to those of native T. versicolor laccase A.     

GpdA-promoter-controlled production of glucose oxidase by recombinant aspergillus niger using nonglucose carbon sources

The gpdA-promoter-controlled exocellular production of glucose oxidase (GOD) by recombinant Aspergillus niger NRRL-3 (GOD3-18) during growth on glucose and nonglucose carbon sources was investigated. Screening of various carbon substrates in shake-flask cultures revealed that exocellular GOD activities were not only obtained on glucose but also during growth on mannose, fructose, and xylose. The performance of A. niger NRRL-3 (GOD3-18) using glucose, fructose, or xylose as carbon substrate was compared in more detail in bioreactor cultures. These studies revealed that gpdA-promoter-controlled GOD synthesis was strictly coupled to cell growth. The gpdA-promoter was most active during growth on glucose. However, the unfavorable rapid GOD-catalyzed transformation of glucose into gluconic acid, a carbon source not supporting further cell growth and GOD production, resulted in low biomass yields and, therefore, reduced the advantageous properties of glucose. The total (endo- and exocellular) specific GOD activities were lowest when growth occurred on fructose (only a third of the activity that was obtained on glucose), whereas utilization of xylose resulted in total specific GOD activities nearly as high as reached during growth on glucose. Also, the portion of GOD excreted into the culture fluid reached similar high levels (≅ 90%) by using either glucose or xylose as substrate, whereas growth on fructose resulted in a more pelleted morphology with more than half the total GOD activity retained in the fungal biomass. Finally, growth on xylose resulted in the highest biomass yield and, consequently, the highest total volumetric GOD activity. These results show that xylose is the most favorable carbon substrate for gpdA-promoter-controlled production of exocellular GOD.     

Toxicity assessment of nickel using Aspergillus niger and its removal from an industrial effluent

Chemical analysis of electroplating effluent revealed the presence of very high concentrations of nickel (393 ppm) in the effluent. Bioassay was carried out to test the toxicity of nickel chloride to Aspergillus niger. In contrast to 50% conidial inhibition at 1.7 mM nickel, hyphal extension was affected even at a lower concentration (0.4 mM), suggesting that hyphae are more sensitive than conidia to nickel. An increase in nickel concentration resulted in a proportionate decrease in the hyphal extension. Nickel (II)-resistant mutants of A. niger M1, M2, and M3, were obtained using direct selection, stepwise adaptation, and ultraviolet mutation techniques. Biosorption of Ni (II) by the mutant M3 was 50% more than that of its parent strain.     

Lipase Production in Solid-State Fermentation Monitoring Biomass Growth of Aspergillus niger Using Digital Image Processing

The aim of this study was to monitor the biomass growth of Aspergillus niger in solid-state fermentation (SSF) for lipase production using digital image processing technique. The strain A. niger 11T53A14 was cultivated in SSF using wheat bran as support, which was enriched with 0.91% (m/v) of ammonium sulfate. The addition of several vegetable oils (castor, soybean, olive, corn, and palm oils) was investigated to enhance lipase production. The maximum lipase activity was obtained using 2% (m/m) castor oil. In these conditions, the growth was evaluated each 24 h for 5 days by the glycosamine content analysis and digital image processing. Lipase activity was also determined. The results indicated that the digital image process technique can be used to monitor biomass growth in a SSF process and to correlate biomass growth and enzyme activity. In addition, the immobilized esterification lipase activity was determined for the butyl oleate synthesis, with and without 50% v/v hexane, resulting in 650 and 120 U/g, respectively. The enzyme was also used for transesterification of soybean oil and ethanol with maximum yield of 2.4%, after 30 min of reaction.