水下目标对幅度高斯相关海面环境噪声场扰动特性的研究

理论探讨了水下目标受海面环境噪声场激发产生的散射场对海洋环境噪声场的扰动特性,基于幅度高斯型相关海面噪声源模型,利用任意声源分布声场的积分表达式和单极子源半无限空间格林函数的球面波展开式,获得了刚性球目标在海面单极子和偶极子源海洋环境噪声“照射”下的直达噪声场、散射噪声场、总噪声场,以及二接收点直达、散射和总噪声协方差的理论表达式,表明总噪声场除了和目标阻抗特性、接收点的方向有关外,还受到海面噪声源相关特性,以及直达与散射噪声场之间干涉的较大影响。数值计算结果给出较近距离范围内,刚球目标声学可见度约为4~5dB,并指出在海洋环境噪声场中,刚球目标散射的方向特性明显不同于平面波入射。      

Predicted attenuation of sound in a rigid-porous ground from an airborne source

An approximate analytical formula has been derived for the prediction of sound fields in a semi-infinite rigid-porous ground due to an airborne source. The method starts by expressing the sound fields in an integral form, which can subsequently be evaluated by the method of steepest descents. The concept of effective impedance has been introduced by using a physically plausible assumption. The integral can then be simplified and evaluated analytically. The analytical solution can be expressed in a closed form analogous to the classical Weyl-Van der Pol formula that has been used for predicting sound fields above a rigid-porous ground. Extensive comparisons with the wave-based numerical solutions according to the fast field formulation and the direct evaluation of the integral have been conducted. It has been demonstrated that the analytical formula is sufficiently accurate to predict the penetration of sound into a wide range of outdoor ground surfaces.     

Mathematically trivial control of sound using a parametric beam focusing source

By exploiting a case regarded as trivial, this paper presents global active noise control using a parametric beam focusing source (PBFS). As with a dipole model, one is used for a primary sound source and the other for a control sound source, the control effect for minimizing a total acoustic power depends on the distance between the two. When the distance becomes zero, the total acoustic power becomes null, hence nothing less than a trivial case. Because of the constraints in practice, there exist difficulties in placing a control source close enough to a primary source. However, by projecting a sound beam of a parametric array loudspeaker onto the target sound source (primary source), a virtual sound source may be created on the target sound source, thereby enabling the collocation of the sources. In order to further ensure feasibility of the trivial case, a PBFS is then introduced in an effort to meet the size of the two sources. Reflected sound wave of the PBFS, which is tantamount to the virtual sound source output, aims to suppress the primary sound. Finally, a numerical analysis as well as an experiment is conducted, verifying the validity of the proposed methodology.     

The propagation of sound in narrow street canyons

This paper addresses an important problem of predicting sound propagation in narrow street canyons with width less than 10 m, which are commonly found in a built-up urban district. Major noise sources are, for example, air conditioners installed on building facades and powered mechanical equipment for repair and construction work. Interference effects due to multiple reflections from building facades and ground surfaces are important contributions in these complex environments. Although the studies of sound transmission in urban areas can be traced back to as early as the 1960s, the resulting mathematical and numerical models are still unable to predict sound fields accurately in city streets. This is understandable because sound propagation in city streets involves many intriguing phenomena such as reflections and scattering at the building facades, diffusion effects due to recessions and protrusions of building surfaces, geometric spreading, and atmospheric absorption. This paper describes the development of a numerical model for the prediction of sound fields in city streets. To simplify the problem, a typical city street is represented by two parallel reflecting walls and a flat impedance ground. The numerical model is based on a simple ray theory that takes account of multiple reflections from the building facades. The sound fields due to the point source and its images are summed coherently such that mutual interference effects between contributing rays can be included in the analysis. Indoor experiments are conducted in an anechoic chamber. Experimental data are compared with theoretical predictions to establish the validity and usefulness of this simple model. Outdoor experimental measurements have also been conducted to further validate the model.     

The influence of turbulence on noise propagation from a point source above a flat ground surface

The presence of turbulence in the atmosphere affects the interaction between an acoustic wave and the ground surface. The noise attenuation by the ground in the presence of atmospheric turbulence is smaller than in non-turbulent atmosphere.A simple engineering model of noise propagation above a flat ground surface, for stationary and moving point sources, has been proposed. The model takes into account the air absorption and ground effect in the presence of turbulence.As well as parameters for type of ground and air absorption, the model introduces two adjustable parameters which must be deduced from in situ measurements at two ranges or two heights. The model’s free parameters have been obtained as a function of the resultant sound speed gradient on the basis of the field measurements performed for a stationary noise source. Also, using field data for a vehicle moving at steady speeds up to 100 km/h, the model has been verified for a moving point source.     

Efficient calculation of two-dimensional periodic and waveguide acoustic Green's functions

New representations and efficient calculation methods are derived for the problem of propagation from an infinite regularly spaced array of coherent line sources above a homogeneous impedance plane, and for the Green's function for sound propagation in the canyon formed by two infinitely high, parallel rigid or sound soft walls and an impedance ground surface. The infinite sum of source contributions is replaced by a finite sum and the remainder is expressed as a Laplace-type integral. A pole subtraction technique is used to remove poles in the integrand which lie near the path of integration, obtaining a smooth integrand, more suitable for numerical integration, and a specific numerical integration method is proposed. Numerical experiments show highly accurate results across the frequency spectrum for a range of ground surface types. It is expected that the methods proposed will prove useful in boundary element modeling of noise propagation in canyon streets and in ducts, and for problems of scattering by periodic surfaces.     

Numerical study on reduction of the elevated structure noise by surface absorption on plate girders

With the aim to propose a reasonable and effective countermeasure for the elevated structure noise, the sound field radiated by a steel plate girder, which is the main source of the elevated structure noise, have been theoretically analysed. In the present study, steel plate girders are modelled as infinitely long elastic plate strips placed in parallel and numerical examples on the sound field radiated by the steel plate girders are shown. In the analysis of the radiated sound field, the equivalent source method is employed. Effect of the surface absorption on the sound field radiated by the girders is discussed through numerical examples. The results show that the surface absorption is effective for reduction of the radiated sound field, especially in the area that increase of sound pressure due to reflection by adjacent plate girders is observed. Furthermore, to design for reasonable countermeasure, variation of the noise reduction effect due to changing the pattern of surface absorption area on plate girders is classified.     

Noise reduction in tunnels by hard rough surfaces

This paper examines the feasibility of using two-dimensional hard rough surfaces to reduce noise levels in traffic tunnels with perfectly reflecting boundaries. First, the Twersky boss model is used to estimate the acoustic impedance of a hard rough surface. Second, an image source model is then used to compute the propagation of sound in a long rectangular enclosure with finite impedance. The total sound fields are calculated by summing the contributions from all image sources coherently. Two model tunnels are built to validate the proposed model experimentally. Finally, a case study for a realistic geometrical configuration is presented to explore the use of hard rough surfaces for reducing traffic noise in a tunnel which is constructed with hard boundaries.     

A compound secondary source for active noise radiation control

Based on the analysis of active noise control system with multi-channel monopole secondary sources, a kind of compound secondary source is proposed in this paper. The proposed compound secondary source consists of two closely located monopole sources with their distance much smaller than a wavelength. The characteristics of the compound source are analyzed, and the performances of the active noise control system with the compound secondary sources on the monopole primary sound field and sound radiated by a plate are investigated both numerically and experimentally. It has been found that the proposed compound secondary sources control system can provide higher noise reduction for free field noise radiation control with the same number of control channels. It is shown that the better performance in noise reduction of the compound secondary sources control system is mainly due to the directivity of the secondary sources where the energy radiation pattern of the compound sources is similar to that of the primary sources.     

The diffraction of sound by an impedance sphere in the vicinity of a ground surface

The problem of sound diffraction by an absorbing sphere due to a monopole point source was investigated. The theoretical models were extended to consider the case of sound diffraction by an absorbing sphere with a locally reacting boundary or an extended reaction boundary placed above an outdoor ground surface of finite impedance. The separation of variables techniques and appropriate wave field expansions were used to derive the analytical solutions. By adopting an image method, the solutions could be formulated to account for the multiple scattering of sound between the sphere and its image near a flat acoustically hard or an impedance ground. The effect of ground on the reflected sound fields was incorporated in the theoretical model by employing an approximate analytical solution known as the Weyl-van der Pol formula. An approximation solution was suggested to determine the scattering coefficients from a set of linearly coupled complex equations for an absorbing sphere not too close to the ground. The approximate method substantially reduced the computational time for calculating the sound field. Preliminary measurements were conducted to characterize the acoustical properties of an absorbing sphere made of open cell polyurethane foam. Subsequent experiments were carried out to demonstrate the validity of the proposed theoretical models for various source/receiver configurations around the sphere above an acoustically hard ground and an impedance ground. Satisfactory comparative results were obtained between the theoretical predictions and experimental data. It was found that the theoretical predictions derived from the approximate solution agreed well with the results obtained by using the exact solutions.     

Scan-based near-field acoustical holography and partial field decomposition in the presence of noise and source level variation

Practical holography measurements of composite sources are usually performed using a multireference cross-spectral approach, and the measured sound field must be decomposed into spatially coherent partial fields before holographic projection. The formulations by which the latter approach have been implemented have not taken explicit account of the effect of additive noise on the reference signals and so have strictly been limited to the case in which noise superimposed on the reference signals is negligible. Further, when the sound field is measured by scanning a subarray over a number of patches in sequence, the decomposed partial fields can suffer from corruption in the form of a spatially distributed error resulting from source level variation from scan-to-scan. In the present work, the effects of both noise included in the reference signals, and source level variation during a scan-based measurement, on partial field decomposition are described, and an integrated procedure for simultaneously suppressing the two effects is provided. Also, the relative performance of two partial field decomposition formulations is compared, and a strategy for obtaining the best results is described. The proposed procedure has been verified by using numerical simulations and has been applied to holographic measurements of a subsonic jet.     

Influence of vehicle noise emission directivity on sound level distribution in a canyon street. Part I: Simulation program test

Simulation programs may be useful tools for controlling an environmental noise. The computer simulation program PROP11 that enables predictions of the time-average sound level within an urban system is used here. A roadway as a noise source is represented by a sum of the sound exposures due to individual vehicle pass-bys. Different representations of equivalent point sources for various classes of vehicles are allowed including directivity characteristics other than omnidirectional. Propagation throughout an urban system contains multi-reflections from the walls and single and double diffraction at their edges. In this paper, the PROP11 program is used to predict the sound level between opposing façades of buildings in a canyon street. A multi-lane road is assumed to contain two classes of vehicles (light and heavy) ones. The equivalent source representing vehicles is defined by the source power spectrum, its position above the ground and directivity characteristics. The consequences of introducing equivalent source directivity are analyzed.     

Optimisation of ground attenuation for moving sound sources

In an earlier study, Attenborough and Li [Attenborough K, Li, KM. Ground effect for A-weighted noise in the presence of turbulence and refraction. J Acoust Soc Am 102:1997;1013-22] derived a closed form analytical formula to calculate optimum ground parameters for reducing the A-weighted noise due to a stationary point source. This paper extends this earlier study by deriving an expression to calculate the sound field due to a source moving at a constant speed above a ground surface. An A-weighted mean-square sound pressure has been derived that enables one to estimate the sound exposure levels of a moving source. Numerical calculations for a realistic range of speeds show the influence of the source motion on the noise levels. Although the predicted effects on the ground attenuation are moderate, they are significant at a relatively low Mach number. In addition, the sensitivity to the atmospheric turbulence and the geometrical parameters tends to be altered by the source motion. On the other hand, it is demonstrated that the optimum ground parameters are similar for stationary and moving sources.     

边界层转捩区声辐射的预报方法研究

对Lighthill剪切应力脉动模型和Liepmann位移厚度脉动模型进行了讨论,在此基础上,本文提出利用Krane偶极子声源模型对Liepmann单极子声源模型进行改进。数值计算结果表明:作为偶极子声源的Lighthill理论剪切应力脉动模型,预报的噪声级偏低;而作为单极子声源的Liepmann模型,预报的噪声级又偏高;本文提出的两种改进模型预报的噪声级则与Lauchle实验值的一致性较好。     

In situ measurements of surface impedance and absorption coefficients of porous materials using two microphones and ambient noise

An in situ measurement method is proposed for obtaining the normal surface impedance and absorption coefficient of porous materials using two microphones located close to the material without a specific sound source such as a loudspeaker. Ambient environmental noise that does not excite distinct modes in the sound field is employed as the sound source. Measurements of the normal surface impedance of glass wool and rockwool have been made using this method in various sound fields. The repeatability and wide applicability of the method are demonstrated by comparing results of measurements in one room with different noise conditions and in three other environments (corridor, cafeteria and terrace). The assumed diffuse nature of the sound field on the material is validated by using absorption characteristics obtained experimentally at oblique incidence. This method allows simple and efficient in situ measurements of absorption characteristics of materials in a diffuse field.     

非自由声场中目标声场还原与重建的等效源方法

为消除在非自由声场中重建声场时干扰声源对重建效果的影响,提出一种采用单个测量面上的声压和质点振速作为输入、等效源法作为分离和重建算法的非自由声场中目标声场还原与重建方法。该方法首先利用单面声压-质点振速测量和基于等效源法的声场分离技术将测量的混合声场分离为来自目标声源的向外传播的声场和来自干扰声源的向内传播的声场,然后利用向内传播的声场和目标声源的边界条件计算出干扰声在目标声源表面产生的散射声场,并将其从向外传播的声场中去除,还原出目标声源在自由声场条件下的辐射声场,最后利用还原的声场实现目标声场重建。通过数值仿真和实验检验了该方法的有效性和必要性。仿真和实验的结果表明,该方法可以在非自由声场的测量条件下,有效地去除干扰声的影响,实现目标声场的准确重建。      

An equivalent source method for recovering and reconstructing the target sound field in a non-free field

In a non-free field,the existence of disturbing sources would destroy the free-field condition required by near-field acoustic holography,and confuse the identification of target source due to the scattering effect caused by disturbing sound falling on the target source.To totally remove the influence of disturbing source,a method for recovering and reconstructing the target sound field in a non-free field was proposed based on the equivalent source method and the pressure-velocity measurement.In the proposed method,the sound field separation technique was firstly used to separate the mixed sound field into the outgoing field coming from the target source and the incoming field coming from the disturbing source.Then the scattered component contained in the outgoing field was calculated by using the disturbing sound and the surface impedance of the target source.Finally,the sound field radiated by the target source in a free field was obtained by subtracting the scattered component from the outgoing field and was further used to reconstruct the sound field of the target source.The proposed method was numerically and experimentally testified and the results of both the simulation and the experiment demonstrated the validity of the proposed method.     

Effect of randomly varying impedance on the interference of the direct and ground-reflected waves

A randomly varying ground impedance is introduced into the solution for the sound field produced by a point source in a homogeneous atmosphere above a flat ground. The results show that in general the ground with a random impedance cannot be represented by an effective, non-random impedance. The behavior of the solution is studied with a relaxation model for the impedance in which porosity and the static flow resistivity are random variables. Mean values and standard deviations are adopted from measurements of two types of ground surfaces. For both surfaces, the mean intensity of the sound field above a random-impedance ground deviates only slightly from the intensity above a non-random impedance. The normalized standard deviation of intensity fluctuations can, however, be greater than one, thus indicating that for a particular realization of the random impedance, the sound intensity might significantly deviate from the intensity for a non-random impedance.     

Effect of wall aperture on sound propagation within a tube

I.IntroductionInmanycasesthecontinuityofsoundpropagationwithinatubeisbrokenbyaperturesonthetubewallsuchastoneholesonthemainboreofwoodwindmusicalinstruments,rectangularsound-windowofChineseinstrumentshengetc.Thediscontinuityhaseffectonwavccncoun-tCringit.Keefestudicdasing1etoneholeofwoodwindinstrumentandrepresenteditbyaT-sectionequiva1entcirc.it[11.Inthispaper,theapertureontubewa1lisstudiedfromdifferentpointofview,a1thoughtheGreen'sfunctionmethodisalsousedinthetheoreticalana1ysis.Moresimp1er…