水性含氟聚氨酯的研究进展

水性含氟聚氨酯具有低的VOC排放,同时由于氟元素的引入,解决了传统水性聚氨酯耐水、耐油性差的缺点,大大拓展了其在涂料、皮革、油墨等领域的应用范围,因此受到广泛关注.本文综述了近年来国内外水性含氟聚氨酯的主要研究进展,综合比较了两种合成水性含氟聚氨酯主要方法,即核壳乳液聚合法和缩聚共聚法的各自特点,并对由两种不同方法制备的水性含氟聚氨的性能进行了讨论.     

氨基硅油扩链改性水性聚氨酯的合成及性能研究

采用甲苯二异氰酸酯(TDI)、聚氧化丙烯二醇(PPG)、2,2-二羟甲基丙酸(DMPA)为原料,先制备成聚氨酯预聚体,再通过在乳化过程中以侧链氨基硅油(AEAPS)或直链氨基硅油(ATPS)扩链制得了一系列水性聚氨酯乳液,并对涂膜的红外光谱、耐水性、力学性能和表面疏水性等进行了研究。结果表明,通过氨基硅油改性的聚氨酯涂膜,在保持力学性能基本不变的情况下,其耐水性、表面疏水性等性能都有明显提高。其中,侧链氨基硅油(AEAPS)比直链氨基硅油(ATPS)具有更好的改性效果。     

水性聚氨酯的制备及其性能的研究

本文以琥珀酸酐与三羟甲基丙烷反应,制得了含有羟基和羧基的酯类亲水性单体,并以此单体与ＴＤＩ和ＰＰＧ－１０００反应,制得了含有羧基的聚氨酯预聚体,在三乙醇胺水溶液中分散得到了水性聚氨酯（简称ＷＰＵ）。本文对预聚体的溶剂种类和用量,对乳胶粒的大小及形状的影响进行了研究,确认溶剂的用量越大,乳胶的粒径就越小;以丙酮作溶剂,乳胶粒为棒状或橄榄球状,而以丁酮为溶剂,得到的乳胶粒为圆球状。通过改变亲水单体的用     

二羟基硅油改性水性聚氨酯树脂的合成及性能

以异佛尔酮二异氰酸酯(IPDI)、二羟基硅油(DHPDMS)、聚酯二元醇和二羟甲基丙酸(DMPA)为主要原料,合成了高固含量(38%)、挥发性有机化合物(VOC)为60g/L的DHPDMS改性水性聚氨酯树脂(SiPU-Ⅰ)。探讨了DHPDMS的质量分数(ω(DHPDMS))、DHPDMS的分子量(Mn)对DHPDMS改性聚氨酯树脂的外观、粘度(η)、附着力、吸水率(Sw)、硬度、拉伸强度(σ)、断裂伸长率(ε)等性能的影响。结果表明,DHPDMS质量分数为2%、分子量为3000时改性树脂的各项性能较优异,附着力为1级,机械性能较好(σ=14.48MPa,ε=521%)。红外光谱分析表明,硅氧键确实引入到聚合物中且聚合物中存在大量氢键;DSC测试表明,聚合物有2个玻璃化转变温度(Tg1=-28.1℃,Tg2=34.4℃),存在微相分离。     

水性聚氨酯胶粘剂结构与性能的研究

以聚醚烽异氟尔酮二异氰酸酯为主要原料,以二羟甲基酸为亲水单体制备了一组不同配方组成的聚氨酯乳胶粘剂。通过粘度测定、粒度分析、力度性能的测试以及DSC分析,研究了新水剂含量、软链段的类型和加料方法对乳液及其胶膜性能的影响。结果表明：二羟甲基丙酸含量在3％－8％之间可获得比较稳定的乳液,并且两步法较一步法制得的乳液分散性好,但胶膜力学性能方面,一步法较好。     

丙烯酸酯改性水性聚氨酯乳液的制备及性能研究

采用共聚的方法制备出丙烯酸酯改性的水性聚氨酯共聚乳液(PUA乳液),并对PUA乳液的制备方法和工艺、耐溶剂性、机械稳定性进行了初步的研究。结果表明,具有IPN结构的PUA乳液耐溶剂性、机械稳定性比水性PU有明显的提高。     

生物基水性聚氨酯的制备及性能研究

以甲苯二异氰酸酯(TDI)和二羟甲基丙酸(DMPA)为硬段,丙烯酸松香GMA二元醇(RAG)和聚乙二醇(PEG-1000)为软段,通过预聚体法合成了松香基芳香族型水性聚氨酯(RWPU).利用红外光谱、X射线衍射分析、热重分析、差示扫描量热分析、静态水接触角等分别表征了RWPU的组成、结构、热性能和耐水性,研究了不同R值...     

环氧改性脂肪族水性聚氨酯的合成与性能

环氧改性脂肪族水性聚氨酯的合成与性能;环氧树脂;脂肪族水性聚氨酯;合成;性能     

脂肪族水性聚氨酯的力学性能研究

考察了软段的种类、分子量大小、混合软段的组成对产物力学性能的影响作用。同时还研究了二羟甲基丙酸(DMPA)用量以及中和剂的影响作用．实验结果表明。软段结构对脂肪族水性聚氨酯成膜的力学性能影响很大，聚酯型产物具有较高的模量和拉伸强度。聚醚型产物则具有较高的伸长率．混合软段对产物力学性能的影响较为复杂，随着软段中聚醚含量的升高，产物的硬度和模量均大幅度下降，但拉伸强度和伸长率的变化并不是一个线性关系．产物的模量随软段分子量的提高而降低，但伸长率和拉伸强度却有所提高．当DMPA用量较高时。产物的模量和拉伸强度均较高：当DMPA用量较低时，产物则具有较高的伸长率．中和剂的种类对产物力学性能的影响明显，当以NaOH为中和剂时，产物具有较高的硬度、模量、拉伸强度：以三乙胺为中和剂时，产物具有较高的伸长率．     

PCDL型超支化水性聚氨酯的合成与性能

以甲苯-2,4-二异氰酸酯（TDI）、聚碳酸酯二醇（PCDL）、二羟甲基丙酸（DMPA）和二乙醇胺（DEOA）为原料,采用A₂＋bB₂共聚合路线合成了具有超支化结构的水性聚氨酯（HBAPU）乳液。采用红外光谱（FT-IR）、核磁共振（13C NMR）对产物结构进行了表征,证实了超支化聚氨酯的支化度随 n(NCO)/n(OH)比值的增大而增大。用PCS、TG、电子拉力机对产物的性能进行了测试,同时也对胶膜的耐水性进行了测试,发现在DMPA含量为0.4 mmol/g时,HBAPU的粒径仅有20.57 nm,而线性水性聚氨酯粒径有130.91 nm,并且HBAPU具有良好的耐水性、热稳定性和较高的拉伸强度。     

Study on synthesis,characterizations, and properties of pyridinol-blocked isocyanates and waterborne polyurethane

A series of pyridinol-blocked isophorone isocyanates were synthesized through esterification reaction, Fries rearrangement, and blocking reaction and characterized by ¹H-NMR, ¹³C-NMR, and Fourier transform infrared spectra. Based on the synthesized blocked isocyanates, the blocked waterborne polyurethane (BWPU) was prepared by the self-emulsification method. The deblocking studies revealed that the deblocking temperature reduces with electron-withdrawing and steric hindrance substituents on the ortho position of pyridinol. The stability, molecular weight (M_w), particle size, viscosity, and hydrophilicity of BWPU were studied and compared. The results showed that with an increased amount of blocking agents, molecular weight, particle size, and viscosity decrease and the hydrophilicity increases.     

Structure and properties of composites compression‐molded from silk fibroin powder and waterborne polyurethane

The degummed silk filament was pulverized with a home‐made machine to obtain the silk fibroin (SF) powder with the diameter of around 3 µm. The resulting SF powder was blended with waterborne polyurethane (WPU) aqueous dispersion, and then was dried and compression‐molded to prepare novel blended materials with improved miscibility and mechanical properties. WPU acted as a plasticizer and one of the components for the blends during the compression‐molded process. The structure, morphology, and properties of the blended films were investigated. The results indicated that β‐sheet of SF existed in the blended films. The SEM images showed that the cross‐section of the blended films exhibited an overall homogeneous morphology. Furthermore, the transmission electron microscope observation exhibited that some sphere‐like SF particles were well dispersed in the WPU matrix. The hydrogen bond interaction between SF and WPU in the blended films led to an increase of the glass transition temperature for the soft segment of WPU in the blended films. The blended films showed an improved Young's modulus and tensile strength from 1.2 to 288.9 MPa and 0.3 to 16.5 MPa, respectively, with the increasing of SF up to a content of 70 wt%. The hydrogen‐bonding interactions existing in SF and WPU and compression molding method played the important role in improving the miscibility and mechanical properties of the blended films. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis and thermal properties of antimony doped tin oxide/waterborne polyurethane nanocomposite films as heat insulating materials

The waterborne polyurethane (WPU) was synthesized from the polycondensation between isophorone diisocyanate (IPDI) and polyoxypropylene glycol (N‐210) and then dispersed into water. Subsequently, the WPU emulsion was modified with antimony doped tin oxide (ATO) nanoparticle by ultrasonic dispersion. The ATO/WPU emulsion was cast onto Teflon molds. After being dried, ATO/WPU films were prepared. TEM indicated that the ATO nanoparticles were homogeneously dispersed in the polymer matrix at the nanometer scale. DSC showed that the ATO/WPU nanocomposites displayed increased glass transition temperatures compared to the control WPU. The mechanical properties of the films were characterized by dynamic‐mechanical analysis (DMA). The higher glass transition temperature and storage modulus indicates the superior mechanical properties of WPU modified by ATO nanoparticles over the conventional unmodified WPU. The thermal behaviors of the films were evaluated by thermogravimetric analysis (TGA). It could be found that the incorporation of ATO into WPU can improve the thermal stability dramatically. The results from UV–visible–near infrared spectra indicated that the ATO/WPU films could decrease the infrared transmission effectively. The heat‐insulation measurements showed that glass coated with ATO/WPU films possessed better heat‐insulating effect than empty glass. Copyright © 2010 John Wiley & Sons, Ltd.     

磺化聚苯醚离聚体微乳化过程相反转的研究

以乙酰磺酸为磺化剂制备了磺化度为 3%～ 1 7%mol的磺化聚苯醚 (SPPO)并中和成盐 ,在一定的温度和搅拌速度下 ,加水将SPPO乳化成水包油的稳定水基微乳液。用乳化过程中的体系的电导率、粘度和表面张力的变化表征了乳化相反转过程。另外还研究了溶剂的极性和离子含量对SPPO溶液可乳化性和乳化过程的影响     

Bio‐based high‐performance waterborne hyperbranched polyurethane thermoset

Tannic‐acid‐based low volatile organic compound‐containing waterborne hyperbranched polyurethane was prepared. In order to improve the performance, it was modified in an aqueous medium using a glycerol‐based hyperbranched epoxy and vegetable‐oil‐based poly(amido amine) at different wt%. The combined system was cross‐linked by heating at 100°C for 45 min. Fourier transform infrared spectroscopy and swelling study were used to confirm the curing. A dose‐dependent improvement of properties was witnessed for the thermoset. Thermoset with 30 wt% epoxy showed excellent improvements in mechanical properties like tensile strength (~3.4 fold), scratch hardness (~2 fold), impact resistance (~1.3 fold), and toughness (~1.7 fold). Thermogravimetric analysis revealed enhancement of thermal properties (maximum 70°C increment of degradation temperature and 8°C increment of T_g). The modified system showed better chemical and water resistance compared with the neat polyurethane. Biodegradation study was carried out by broth culture method using Pseudomonas aeruginosa as the test organism. An adequate biodegradation was witnessed, as evidenced by weight loss profile, bacterial growth curve, and scanning electron microscope images. The work showed the way to develop environmentally benign waterborne polyurethane as a high‐performance material by incorporating a reactive modifier into the polymer network. Use of benign solvent and bio‐based materials as well as profound biodegradability justified eco‐friendliness and sustainability of the modified system. Copyright © 2015 John Wiley & Sons, Ltd.     

UV curable waterborne polyurethane acrylate dispersions based on hyperbranched aliphatic polyester: effect of molecular structure on physical and thermal properties

A novel waterborne hyperbranched polyurethane acrylate for aqueous dispersions (WHPUDs) based on hydroxy‐functionalized hyperbranched aliphatic polyester Boltorn? H20 was investigated. The effects of structural composition and crosslinking density have been studied in terms of swellability by water, thermal degradation, viscosity changes as well as transmission electron microscopy (TEM) morphology. The swell ratio showed an increasing trend with the higher concentration of ionic group, which is due to the increased total surface area of particles. The results of thermogravimetric analysis (TGA) for cured WHPUD films indicated good thermal stability with no appreciable weight loss until 200°C. The activation energies were evaluated and were found in the range 154–186 kJ mol^?1. It was observed that an increase in hard segment content provoked the increases in thermal degradation temperature and activation energy of waterborne dispersions. The transmission electron photographs revealed that the average particle sizes of aqueous dispersions were in the range 30–125 nm. Owing to the enlargement of the stabilization site, the particle size decreased as the content of carboxyl group and degree of neutralization increased. The viscosity of WHPUDs increased rapidly with increasing the degree of neutralization. Moreover, water showed a favorable viscosity reduction effect. Copyright © 2004 John Wiley & Sons, Ltd.     

Hydrogen bonding,mechanical properties,and surface morphology of clay/waterborne polyurethane nanocomposites

A novel clay/waterborne polyurethane (WPU) nanocomposite was synthesized from polyurethane and saponite organoclay. The clay was organically modified with various swelling agents, the effect of which has been investigated. Hydrogen bonding between organic and inorganic materials was characterized with Fourier transform infrared (FTIR) spectroscopy. The results implied that hydrogen bonding increased when organoclay was added. Mechanical and wear property studies revealed that introducing clay into waterborne polyurethane will enhance the Young's modulus (from 56 to 126 MPa), the maximum stress (from 3.9 to 7.6 MPa), and the elongation at break (from 27.7 to 58.7%) of the nanocomposite by a factor of two, whereas the wear loss will be only one third of the neat waterborne polyurethane. Atomic force microscopy (AFM) was used to analyze the surface morphology of the nanocomposite. An AFM microphotograph showed that the surface of the clay/waterborne polyurethane nanocomposite was smoother when clay was added in waterborne polyurethane. The average roughness (R_a) decreased from 1.00 to 0.12. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1–12, 2005     

Hydrophobic polyurethane polyHIPEs templated from mannitol within nonaqueous high internal phase emulsions for oil spill recovery

Although amphiphilicity is an integral component for the applications of polyHIPEs (PHs), it is challenging to produce hydrophobic PHs from hydrophilic monomers. Herein, hydrophobic polyurethane (PU) PHs have been fabricated from a water‐soluble mannitol within block copolymer surfactant‐stabilized, nonaqueous high internal phase emulsions (HIPEs). These highly porous, interconnected, macroporous PU PHs were hydrophobic with water contact angles between 102° and 140°, demonstrating that water‐soluble monomers could be used for fabrication of hydrophobic PHs. The block copolymer surfactant acted not only as the HIPE stabilizer, but also as a monomer, enhancing hydrophobicity and overcoming some drawbacks imposed by conventional inert stabilizers. The solvents used for PU PH synthesis and purification were easily recovered and reused, showing that nonaqueous HIPE templating for PU PH preparation is an efficient and facile route. The PU PHs were investigated for oil spill reclamation and they were demonstrated to be an ideal candidate for such an application. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1315–1321     

水性聚氨酯相变储能材料的相变机理

以聚乙二醇(PEG)为软段、六亚甲基二异氰酸酯-1,4-丁二醇-二羟甲基丙酸(HDI-BDO-DMPA)为硬段,制备了一系列水性聚氨酯相变储能材料(WPUPCM)。在相变过程中,由于软段PEG由聚合前的固-液相变转化为聚合后的固-固相变,因此,所制备的WPUPCM表现出固-固相变特性。为了研究其固态相变行为的本质和形成机理,揭示该类聚合物的能量贮存和转换机理,应用偏光显微镜、扫描电镜、原子力显微镜、X射线衍射仪分析研究了PEG、WPUPCM在相变过程中的晶体结构变化特征,讨论了WPUPCM固-固相转变的机理。