平板式螺旋相位板的设计与应用

传统的螺旋相位板是一种利用沿方位角方向介质材料高度递增实现对光束相位调控产生涡旋光束的光学器件,由于这种特殊的几何结构特征使其不能通过相位板的叠加而调控出射光束所携带的角量子数.本文基于坐标变换方法将介质材料沿方位角方向折射率不变而高度递增的传统螺旋相位板变换为一种介质材料沿方位角方向高度不变而折射率递增的平板式螺旋相位板.通过理论分析与数值模拟,发现本文所设计的平板式螺旋相位板不仅与传统螺旋相位板一样能够产生高质量的涡旋光束,而且平板式螺旋相位板的高度和涡旋光束携带的角量子数可以根据介质材料的折射率选取而任意调节.为了实际应用的需要,可以通过叠加多层平板式螺旋相位板以获得不同角量子数的涡旋光束.这种平板式螺旋相位板在光传输、光通信等领域具有广阔的潜在应用价值.     

等光程干涉仪中参考镜楔角最优补偿方式研究北大核心CSCD

在测量多表面平行样品时,多面干涉会影响测量结果。为了能改善多面干涉问题,介绍了等光程干涉仪,并研究了参考镜楔角的最佳补偿方式。在等光程干涉仪中,由于参考镜和分光镜的楔角和倾角的存在,测量结果中会带有回程误差。根据参考镜楔角的不同情况采用了不同的补偿,理论分析并确定了各种补偿的放置方式和补偿量,同时研究了倾角和楔角的大小对于要被遮拦光束高度和像方数值孔径NA的影响。再利用Zemax进行不同补偿方式下的干涉仪仿真,并根据仿真得到的干涉图PV值分析回程误差的大小。分析表明:选用最佳补偿方式,参考镜楔角为1′,回程误差优于0.003个波长。     

Focus evolution of linearly polarized Lorentz beam with sine-azimuthal variation wavefront induced by one on-axis optical vortex

Focus evolution of linearly polarized Lorentz beam with sine-azimuthal variation wavefront induced by one on-axis optical vortex was investigated theoretically in this article. Calculation results show that the focal pattern can be altered considerably by the charge number of on-axis optical vortex under condition of certain beam parameters and phase parameter that indicates the sine phase change frequency on increasing azimuthal angle. And the focal evolution principle differs remarkably for different beam parameters and the phase parameter. In focus evolution process, some novel focal patterns appear, including annular focal pattern, two-peak focal pattern, intensity lines, hexagon containing two peaks, swallowtail shape, multipede shape, and complex focal pattern. Introduction of optical vortex adds one controllable parameter to alter focal pattern, which may extend application of Lorentz beam in some focusing systems.     

标定光学劈尖厚度的波长数目研究

菲佐(Fizeau)激光波长计中光学劈尖厚度的标定是准确测量激光波长的先决条件。本文详细研究了进行光学劈尖厚度标定所需要的标定波长数目,分析结果表明:标定波长数目主要与标定波长的选择方式及光学劈尖厚度的误差范围有关。     

激光雷达系统快速准直的方法和光学装置

 研制了一种能够方便、快速调节激光雷达收发光路准直的光学装置,分析了装置楔角的选取要求、准直误差及其相应的矫正方法。该装置结构简单,主要由两个楔形光学平板组成,通过电机转动两个楔板可使出射光束方向在一定范围内任意改变,该调节范围由楔板的楔角和折射率决定。利用折射定律,严格推导了装置中两个楔形光学平板的旋转角度与出射光束方向之间的关系。提出了将该光学装置插入到激光雷达发射光路,采用螺旋式粗扫、圆形和径向细扫相结合的光束扫描方式实现对激光雷达准直的方法,并给出了系统准直调节过程中的判断准则和具体的准直步骤。     

利用全息法在偶氮聚合物薄膜中记录涡旋光场

利用全息技术在偶氮聚合物薄膜中记录了拓扑荷数q=–1,1,2,4的涡旋光场,并将记录的原始叉形光栅与计算全息光栅进行对比,对不同拓扑荷数涡旋光的记录速率和偶氮材料的可重复擦写性能进行了测试;记录完成后,将复现涡旋光与高斯光束干涉,并与原始涡旋光和原始叉形光栅对比,分析了记录质量.实验结果表明:高阶涡旋光场的全息叉形光栅会在记录过程中发生劈裂,轻微劈裂的涡旋光束仍维持一个稳定的环状结构;全息记录过程中不同拓扑荷数的涡旋光束记录速率较为统一,偶氮材料可经过上百次的擦写而不出现疲劳;再现涡旋光与原始涡旋光在光强分布结构上保持高度一致,再现涡旋光的干涉条纹与原始涡旋全息光栅保持高度一致,涡旋光及其携带的拓扑荷信息可被有效记录和读取.     

Switchable vector vortex beam generation using an optical fiber

We present our experimental results on directly transforming a circular-polarized Gaussian beam into linear-polarized vector vortex beams using a two-mode fiber and demonstrate switching between the different 0th-order vector vortex modes excited and guided in the fiber. Depending on the handiness of circular-polarization of the input Gaussian light beam, its launch angle with respect to the fiber axis and by changing them appropriately it is possible to excite and switch between the different vector vortex modes and its coherent linear superposition supported by the two-mode fiber. The output optical beams due to the selectively excited vector modes in the fiber are characterized by using a rotating analyzer and a two-beam interferometer setup to study the polarization and the phase behavior of the vector vortex beam.     

Polarization vortex spatial optical solitons in Bessel optical lattices

We investigate the formation of polarization vortex spatial optical solitons in optical lattice induced by a non-diffracting Bessel beam. The properties of these solitons in zeroth-order and first-order Bessel lattices with focusing and defocusing Kerr nonlinearity are discussed. It is found that these solitons have some analogies with phase vortex solitons carrying single positive or negative topological charge in these lattices. Besides, these polarization vortex solitons have complicated dynamical characteristic and can be stabilized in some parameter region.     

Generation of Optical Vortex Using a Spiral Phase Plate Fabricated in Quartz by Direct Laser Writing and Inductively Coupled Plasma Etching

A simple, economical and reliable technique is proposed for fabricating a spiral phase plate （SPP） in a quartz substrate to generate optical vortex with a unit topological charge at the wavelengths of 632.8nm. The spiral phase plate is first formed in the photoresist by direct laser writing lithography and then transferred into the quartz substrate by inductively coupled plasma etching. The performance of the fabricated SPP is verified by using beam intensity distribution, which is in agreement with the theoretical calculation result. The interference measurement suggests that we have succeeded to generate optical vortex with a unit topological charge with the fabricated SPP.     

Selective generation of high-order optical vortices from a single phase wedge

We demonstrate that it is possible to generate high-order optical vortices from a single phase wedge by applying an incident beam with an annular intensity distribution. Various topological charges of optical vortices are realized by a static phase wedge when the position and radius of the annular illumination are changed accordingly.     

Three-Airy autofocusing beams

We numerically and experimentally demonstrate that a three-Airy autofocusing beam can be generated by superposing three deformed two-dimensional(2 D) Airy beams with a triangle symmetry. When the initial angle between two wings of the deformed 2 D Airy beams increases, such a three-Airy autofocusing beam exhibits that the focusing length decreases and the intensity contrast at the focal point changes. Moreover, after introducing an optical vortex phase, this three-Airy autofocusing beam displays a transverse rotation in propagation. The rotation angle is determined by the topological charge of the vortex and the initial wing angle. Our results may have some potential applications in optical manipulation.     

Plasmonic tomography of optical vortices

We present a method for analyzing the wavefront of optical vortices that does not involve interferometry but rather uses surface plasmon polaritons (SPPs). We employ a subwavelength slit in a gold film to cut slices from an optical vortex beam and measure the diffraction of the generated SPPs by scattering them off a second slit. By moving the slits across the vortex beam, we create a tomogram, from which we can determine the vortex charge of the incident beam at a glance. We present results for vortex beams of integer- and half-integer-vortex charge.     

Propagation dynamics and optical trapping of a radial Airy array beam

Analytical propagation expression of a radial Airy array beam in coherent and incoherent combination passing through paraxial ABCD system is derived, and used to investigate the effect of combination scheme, array orientation and initial phase of Airy beamlet on propagation dynamics of the resulting beam in free space, where optical spot array and vortex array with different shapes are also found, respectively. And then taking four-beamlet Airy array beam in same array orientation as an example, square optical spot array obtained in focal field can be used for simultaneous trapping multiple Rayleigh particles with relative refractive index larger than 1. The transverse gradient forces serving as restore forces tend to push particles at different initial positions to their individual optical spot center. The analysis of trapping stability indicates that larger input peak intensity of Airy beamlet and smaller particle size are benefit to trapping particle owing to many deeper potential wells. Vortex array produced by coherent combined Airy array beam in this paper is expected to be useful for simultaneous trapping microparticles with relative refractive index smaller than 1.     

Radially polarized hollow Gaussian beam with on-axis spiral optical vortex

The focusing properties of radially polarized hollow Gaussian beam (HGB) with on-axis spiral optical vortex are investigated theoretically by vector diffraction theory. The phase wavefront of HGB is the function of radial coordinate. Calculation results show that the focusing properties can be altered considerably by beam order of HGB, topological charge of the on-axis optical vortex, and phase parameter that characterizes the radial phase wavefront distribution. Higher topological charge induces focal evolution from one focal spot to annular focal pattern in transverse direction, while phase parameter can lead to focal shift along optical axis remarkably. In addition, focal shift direction can also be adjusted by changing varying direction of phase parameter.     

Experimental verification on tightly focused radially polarized vortex beams

The theoretical and experimental results of tightly focused radially polarized vortex beams are demonstrated. An auto-focus technology is introduced into the measurement system in order to enhance the measurement precision, and the radially polarized vortex beams are generated by a liquid-crystal polarization converter and a vortex phase plate. The focused fields of radially polarized vortex beams with different topological charges at numerical apertures （NAs） of 0.65 and 0.85 are measured respectively, and the results indicate that the total intensity distribution at focus is dependent not only on the NA of the focusing objective lens and polarization pattern of the beam but also on the topological charge l of the beam. Some unique focusing properties of radially polarized vortex beams with fractional topological charges are presented based on numerical calculations. The experimental verification paves the way for some practical applications of radially polarized vortex beams, such as in optical trapping, near-field microscopy, and material processing.     

Topological stability of stored optical vortices

We report an experiment in which an optical vortex is stored in a vapor of Rb atoms. Because of its 2pi phase twist, this mode, also known as the Laguerre-Gauss mode, is topologically stable and cannot unwind even under conditions of strong diffusion. For comparison, we stored a Gaussian beam with a dark center and a uniform phase. Contrary to the optical vortex, which stays stable for over 100 micros, the dark center in the retrieved flat-phased image was filled with light after a storage time as short as 10 micros. The experiment proves that higher electromagnetic modes can be converted into atomic coherences and that modes with phase singularities are robust to decoherence effects such as diffusion. This opens the possibility to more elaborate schemes for classical and quantum information storage in atomic vapors.     

Dynamic evolution of transverse energy flow in focused asymmetric optical vector-vortex beams

We present here controlled generation of asymmetric optical vector-vortex beams using a two-mode optical fiber and study the dynamic evolution of the transverse energy flow (TEF) when focused through a spherical lens. The dependence of the TEF on various factors such as the vortex charge, vortex anisotropy and polarization structure around the vortex core is explored. It is found that the TEF is directly proportional to the phase gradient and its direction is governed by the vortex charge. The presence of C-point polarization singularity in the beam and the polarization structure around it results in vibrational phase gradient which is the major factor deciding the TEF in vector-vortex beams.     

Adaptive correction of vortex laser beam in a closed-loop system with phase only liquid crystal spatial light modulator

We propose and demonstrate the wave front correction of a vortex laser beam by using dual phase only liquid crystal spatial light modulators (LC-SLMs) and a stochastic parallel gradient descent (SPGD) algorithm. One phase only LC-SLM is used to generate vortex laser beam by loading spiral phase screen onto the wave front of input quasi-Gaussian beam. The other phase only LC-SLM under SPGD controller based on the subzone control method adaptively compensates the wave front of vortex laser beam. Numerical simulation and experimental results show that after correction, vortex doughnut like beam is focused into a beam with airy disk pattern distribution in the far field. The adaptive corrections of vortex laser beam with different optical topological charges are studied. The results show that the optical topological charge has little influence on adaptive correction. The powers in the main lobe of far field intensity distributions of vortex laser beams with different optical topological charges are all greatly improved by adaptive correction. The technique proposed in this paper can be used in optical communication, relay mirror and atmospheric turbulence correction.     

Observation of an optical vortex beam from a helical undulator in the XUV region

The observation of an optical vortex beam at 60 nm wavelength, produced as the second‐harmonic radiation from a helical undulator, is reported. The helical wavefront of the optical vortex beam was verified by measuring the interference pattern between the vortex beam from a helical undulator and a normal beam from another undulator. Although the interference patterns were slightly blurred owing to the relatively large electron beam emittance, it was possible to observe the interference features thanks to the helical wavefront of the vortex beam. The experimental results were well reproduced by simulation.     

Generation of extreme ultraviolet vortex beams using computer generated holograms

We fabricate computer generated holograms for the generation of phase singularities at extreme ultraviolet (EUV) wavelengths using electron beam lithography and demonstrate their ability to generate optical vortices in the nonzero diffraction orders. To this end, we observe the characteristic intensity distribution of the vortex beam and verify the helical phase structure interferometrically. The presented method forms the basis for further studies on singular light fields in the EUV frequency range, i.e., in EUV interference lithography. Since the method is purely achromatic, it may also find applications in various fields of x ray optics.