Electron absorption spectra and voltabsorptograms of poly-3-octylthiophene films

Steady-state absorption spectra of poly-3-octylthiophene films in different oxidation states and differential cyclic voltabsorptograms of poly-3-octylthiophene films in 0.1 M LiClO₄ solutions in acetonitrile are studied. Electron spectra of films demonstrate the following three absorption bands: a complex band with a pronounced maximum at λ = 450 nm, which corresponds to π → π* electron transitions in the reduced fragments of poly-3-octylthiophene films and two absorption bands (at λ_max = 780 and λ_max > 1100 nm), which correspond to the oxidized film fragments. It is concluded that two chemically and optically distinguishable oxidation products are formed during the polymer oxidation.     

Electrochemical quartz crystal microbalance study of ion transport accompanying charging-discharging of poly(pyrrole) films

Electrochemical quartz crystal microbalance studies on poly(pyrrole) electrodes revealed a complex nature of the potential-dependent sorption of ionic substances. It is found that the relative contribution of anions and cations to the overall charge transport process depends upon several factors, such as the oxidation state of the polymer, the composition of the supporting electrolyte as well as on the film thickness. The phenomena observed are discussed in terms of morphological transformations arising as a result of interactions between the polymer and the mobile substances. Received: 21 August 1998 / Accepted: 21 October 1998     

电化学石英晶体微天平的近期应用进展

本文对近几年来电化学石英晶体微天平（EQCM）在吸附，膜的形成，腐蚀和电沉积等方面的应用进行了概述，并对其应用现状和前景进行了分析。     

Gel processing of electrically conductive blends of poly(3-octylthiophene) and ultrahigh molecular weight polyethylene

The mechanical and electrical properties of solution-processed [or gel-spun] blends of poly(3-octylthiophene) and ultrahigh molecular weight polyethylene are discussed. Tensile drawing at elevated temperatures of the phase-separated blends resulted in significant improvements of the mechanical properties, in comparison with those of the neat conducting polymer, with values of the Young's modulus reaching > 40 GPa and tensile strengths in excess of 2 GPa. Doping of the undrawn polyblend fibers with iodine vapor or FeCl₃ resulted in materials of useful levels of electrical conductivity covering the full range of 10^?15 to 10 S/cm. A distinct percolation threshold for electrical conductivity was not observed, even at poly(3-octylthiophene) concentrations as low as 0.5 w/w %; the electrical conductivity of the latter blend, after doping with iodine vapor, was 8 × 10^?8 S/cm.     

Electrochemically induced transformations of heteropolyanions: new electroactive metal oxide films studied by the electrochemical quartz crystal microbalance

New oxide films have been electrodeposited from [P₂Mo₁₈O₆₂]⁶⁻ by potential cycling in mildly acidic aqueous media. To obtain an adherent and persistent film, it is necessary that more than six electrons/molecule be fixed on the framework of the heteropolyanion. The film is then studied in pure supporting electrolyte. In this medium, a remarkable current increase is observed during the potential cycling. Whether the film is deposited on a glassy carbon electrode or on the gold electrode of an electrochemical quartz crystal microbalance (EQCM), exactly the same steady current increase up to a maximum is obtained in cyclic voltammetric measurements. The EQCM reveals a steady mass increase during the continuous cycling of the film in the supporting electrolyte. This behaviour is interpreted as featuring an irreversible water and electrolyte intake into the film, up to a maximum, after which the phenomena observed during reduction and oxidation processes are taken as featuring intercalation/deintercalation, respectively. This behaviour is much the same as described in the literature for WO₃ and MoO₃ bronzes, except that the present films seem very stable and have shown no tendency to dissolve or deactivate. Received: 2 December 1998 / Accepted: 26 January 1999     

Mass tranfer of ions and solvent at redox processes in poly-3,4-ethylenedioxythiophene films

The work presents the data on mass transfer at the interface of the poly-3,4-ethylenedioxythiophene film with different propylene carbonate electrolyte solutions (TBAPF₆, LiClO₄, NaClO₄, TBAClO₄, TBABF₄) obtained using the quartz microgravimetry method in combination with cyclic voltammetry. It is shown that two parts of different nature can be observed in the region of electric activity of poly-3,4-ethylenedioxythiophene films on Δm, ΔQ curves. They evidence the change in mass transfer conditions at achieving different film oxidation degrees.     

The study of electrochemical palladium behavior using the quartz crystal microbalance

The electrochemical quartz crystal microbalance (EQCMB) method has been used to evaluate the processes which occur in/on the palladium electrode in basic solutions. Hydrogen electrosorption in palladium is accompanied by an additional frequency shift that can be attributed to the stresses generated inside the Pd metal. A non-linear dependence between the mass change and the charge consumed during hydrogen oxidation in the Pd electrode has been found for hydrogen absorbed in the α- and β-phases. This effect precludes the objective estimation of the amount of hydrogen absorbed inside the Pd electrode. The EQCMB method has been used, however, for studying the surface electrode processes on the Pd electrode, i.e. specific anion adsorption, surface oxidation and dissolution. Also, the structure of the palladium oxide formed on the Pd surface during electrochemical oxidation is discussed in this paper and the effect of the anodic limiting potential on the oxide structure is reported. Received: 10 August 1999 / Accepted: 24 September 1999     

Electrochemical quartz crystal microbalance study on the two-electrode-system cyclic voltammetric behavior of Prussian blue films

A two-channel electrochemical quartz crystal microbalance (EQCM) was used to investigate the cyclic voltammetric behavior of two Prussian blue (PB) film-modified Au electrodes in a two-electrode con-figuration in aqueous solution. The redox peaks observed in the two-electrode cyclic voltammogram (CV) are assigned to the intrinsic redox transitions among the Everitt's salt, PB, and Prussian yellow for the film itself, the redox process of the Au substrate and the redox process of small-quantity ferri-/ferrocyanide impurities entrapped in the PB film, as also supported by ultraviolet-visible (UV-Vis) spectroelectrochemical data. The profile of the two-electrode solid-state CV for the PB powder sand-wiched between two gold-coated indium-tin oxide (ITO) electrodes is similar to that for two PB-modified Au electrodes in aqueous solution, implying similar origins for the corresponding redox peaks. The two-channel EQCM method is expected to become a highly effective technique for the studies of the two-electrode electrochemical behaviors of many other species/materials.     

Electrochemical Impedance Spectra of Poly(3-octylthiophene) Films

Charge transfer in poly(3-octylthiophene) films in 0.05–0.5 M LiClO₄ solutions in acetonitrile is studied by an electrochemical impedance method. The resistance to charge transfer R _ct and the capacitance of the electrical double layer C _dl are calculated from the high-frequency semicircle and referred to the film/electrolyte interface. The low-frequency capacitance C _lf and effective diffusion coefficient D _ef are determined by analyzing the region of medium and low frequencies. The discrepancies between potential dependences of C _lf and D _ef derived experimentally and calculated within a simple model for a redox film are analyzed. The assumption is made that additional factors, such as a macroporous character of the films and the change in their properties during oxidation, which results from the film swelling, the change in the film volume and the solvation character, should be taken into account.     

Tin corrosion in highly acidic solutions containing ethylene glycol oligomers and halides: An electrochemical quartz crystal microbalance study

Tin corrosion in 1 M H₂SO₄ solutions containing 0.01 M Sn(II), 0.01 M ethylene glycol or its oligomers, and 30 μM of various halides is studied by the electrochemical quartz crystal microbalance method. The current density of the tin electrode corrosion is found to approach a few tens of μA cm^?2. In the presence of Sn(II), the current density is nearly half that in its absence. The corrosion potential steadily increases with time, approaching a certain limit. In solutions containing Sn(II), the limit practically corresponds to the equilibrium potential of the Sn/Sn²⁺ electrode. The corrosion rate barely depends on the oligomer nature even up to tetraethylene glycol. Halides accelerate the corrosion process. Their action intensifies at initial time instants (up to 15–20 min) in the series Cl^? < Br^? < I^?. The corrosion impedance equals ～1000 ohm cm². It may be ignored when analyzing the overall impedance of the tin electrode in the frequency region extending from 0.1 Hz to 50 kHz.     

Cyclic voltammetric generation and electrochemical quartz crystal microbalance characterization of passive layer of nickel in a weakly acid medium

The electrochemical quartz crystal microbalance results show that nickel electrodissolution and nickel passivation occur simultaneously. Besides, the anodic transferred charge decreases and the passive layer thickness increases with the number of successive voltammetric cycles. Mass balances across the metal/passive layer/solution have been done from the instantaneous F(dm/dQ) function. A dynamic process for generation of an inner NiO and a Ni(OH)₂ outer passive layers is suggested.     

Layered self-organized structures on poly(3-octylthiophene) thin films studied by scanning probe microscopy

The morphology and mechanical properties of poly-(3-octylthiophene) P3OT films thin has been studied by scanning force microscopy techniques. On these films we find self-assembled layered structures that appear regardless of the preparation conditions, that is, spin-coating or drop-casting, of the solvent concentration or of the type of substrate. Using the drop-casting method for sample preparation these layered structures are hardly visible due to the high surface roughness, while using spin-coating these structures are the main topographic feature on the surface. These structures have typically one or two layers, even though occasionally up to four layers have been observed. Each layer has a height of 4-5 nm, which is associated to crystalline P3OT domains and lay on the polymer film. The size of these structures increases with increasing concentration of the P3OT in the solvent. We find well differentiated morphological, electrostatic as well as mechanical properties for the self-assembled structures as compared to the rest of the polymer film. Finally, the growth rate of these structures has been studied.     

Fast and reversible CO2 quartz crystal microbalance response of vinylimidazolium‐based poly(ionic liquid)s

A series of poly(ionic liquid)s (pILs) based on the 1‐vinyl‐3‐hexylimidazolium polymerizable cation and on the bis(trifluoromethylsulfonyl)imide, nonafluoro‐1‐butanesulfonate, dodecylbenzenesulfonate, heptadecafluorooctanesulfonate, and 4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,11‐heptadecafluoroundecanoate anions have been synthesized and characterized. Their sorption/desorption response towards CO₂ has been tested through quartz crystal microbalance investigations. The obtained results show that all of the pILs here reported are featured by peculiar CO₂ sorption properties as they display fast and linear response, reversibility without any memory effect, and reproducibility, suggesting that anion plays a key role in determining sensitivity. Copyright © 2011 John Wiley & Sons, Ltd.     

Improved alternate deposition of biodegradable naturally occurring polymers onto a quartz crystal microbalance

The ultrathin polymer films that were composed of biodegradable and naturally occurring chitosan and poly(γ‐benzylglutamate) were stably deposited onto a quartz crystal microbalance (QCM) by alternate immersion of a QCM from their aqueous solutions in the presence of water‐soluble organic solvents as a USS soluble solvent. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 801–804, 1999     

Ion and solvent transfer discrimination at a nickel hydroxide film exposed to LiOH by combined electrochemical quartz crystal microbalance (EQCM) and probe beam deflection (PBD) techniques

A combined electrochemical quartz crystal microbalance (EQCM) and probe beam deflection (PBD) instrument was used to monitor the mobile species transfers associated with the redox processes of thin (Γ100–150 nmol cm⁻²) α- and β-nickel hydroxide films exposed to aqueous LiOH solution. A comparison of the measured PBD signal with the predicted PBD profiles, calculated by temporal convolution analysis of the current and mass responses, enabled the contributions to redox switching of anion (OH⁻) and solvent (H₂O) transfers to be discriminated quantitatively. The responses from the combined instrument are reconciled in terms of H⁺ deintercalation/intercalation within the nickel hydroxide structure as OH⁻ ions enter/exit the film. Hydroxide ion movement is associated with a counterflux of water. Thin nickel hydroxide films show a gradual α→β phase transformation with continuous voltammetric cycling, especially when the films are exposed to high concentrations of electrolyte. α-Films are characterised by OH⁻ transfers that dominate the H⁺ and H₂O movements; β-films are characterised by an increased participation of water and protons to the exchange dynamics.     

Potentiometric sensors for Ag+ based on poly(3-octylthiophene) (POT)

Potentiometric ion sensors were prepared from the conjugated polymer poly(3-octylthiopene) (POT). The influence of additional membrane components, including silver 7,8,9,10,11,12-hexabromocarborane (AgCB₁₁H₆Br₆) and potassium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate (KTpFPB) as lipophilic salts, and [2.2.2]p,p,p-cyclophane as silver ionophore, was studied. The membrane components were dissolved in chloroform and membranes were prepared by solution casting on glassy carbon disk electrodes. For comparison, POT-based potentiometric sensors were also prepared by galvanostatic electrosynthesis of POT from the 3-octylthiophene monomer. All the POT-based ion sensors fabricated by solution casting show Nernstian or slightly sub-Nernstian response to Ag⁺, even those based only on POT without any additional membrane components. The potentiometric response of electrochemically polymerized POT depends on the film thickness and the doping anion incorporated in the conducting polymer during polymerization. It is of particular importance that chemically synthesized undoped POT (without any additives) shows a sensitive and selective potentiometric response to Ag⁺ ions although UV-vis results show that POT remains in its undoped form, i.e., POT is not oxidized by Ag⁺. This indicates that undoped POT can exhibit good sensitivity and selectivity to Ag⁺ also in the absence of metallic silver in the polymer film. In this case, the potentiometric response is related to interactions between Ag⁺ and the conjugated polymer backbone. Presented at the 4th Baltic Conference on Electrochemistry, Greifswald, 13–16, 2005     

基于金纳米粒子的QCM实时检测DNA错配的研究

利用石英晶体微天平（QCM）技术,用双硫醇分子作为连接剂,将金纳米粒子固定于金电极表面,以人类p53基因片断为DNA探针,研究了其在QCM金电极表面的固定、杂交和错配,重点探讨了金纳米粒子修饰的DNA错配碱基个数和错配位点对杂交的影响。在实验条件下,金纳米粒子在QCM金电极表面的修饰使其灵敏度得到了明显提高;而且,错配碱基个数和错配碱基位点的差异都对杂交产生了不同程度的影响。     

Palladium and the electrochemical quartz crystal microbalance: a new method for the in situ analysis of the precious metal in aqueous solutions

A new method for the quantitative determination of palladium(II) by the electrochemical quartz crystal microbalance (EQCM) technique has been developed. Using a bare carbon-coated quartz crystal, Pd(II) ions are directly deposited from aqueous solution as palladium metal onto the crystal surface, and the Pd(II) concentration is determined with a detection limit of 0.0156 mM, or 1.66 ppm. No complexing agent or preconcentration of palladium is required for the analysis. The palladium is stripped from the crystal through its electrochemical oxidation, regenerating the crystal for subsequent multi-cycle palladium analyses. A conventional gold-coated quartz crystal was incapable of carrying out the same measurements. The EQCM technique presented is simple, sensitive, and reproducible for the detection of this widely used precious metal.     

聚噻吩的光电化学研究

导电聚合物是由一些具有共轭π键的聚合物经化学或电化学掺杂后形成的导电率可从绝缘体延伸到导体范围的一类高分子材料。其中噻吩及其衍生物具有导电率高、环境稳定性好、成膜性好、禁带宽度小等特点,是用做光伏电池的理想材料。相继报道的有聚3-甲噻吩[1]、聚3-己基噻吩[2],聚(3-十一烷基-2,2’-并噻吩)[3]等。对于聚噻吩的光电化学性质的研究,在国际上很少见报道,国内尚未见报道,本文对聚噻吩(PTh)的光电化学性质进行了研究。1实验部分1.1仪器与试剂光电化学实验采用带石英窗口的三电极电解池,工作电极为ITO/PTh膜电极,参比电极为饱和…     

Electrochemical synthesis of poly(3‐methylthiophene): A kinetic study

Poly(3‐methylthiophene) (P3MT) films were electrogenerated on both platinum and carbon‐felt working electrodes. The kinetic equation was determined by the monomer and electrolyte concentrations being changed for different reaction times. For each sample, the weight of the polymer obtained was measured along with the polymerization charge, the oxidation charge, the ratio (R) between the two magnitudes, the charge storage efficiency (SE), and the doping level. The results obtained from the kinetic study indicate significant electrolyte participation in the electropolymerization process. The SE and the doping level decreased inversely proportionately to both the reaction time and the concentrations of the monomer and electrolyte. The ratio R increased with reaction time as well as with monomer or electrolyte concentrations for all P3MTs generated on the carbon‐felt electrodes, whereas for those films generated on platinum electrodes, the highest values were obtained for the lowest monomer and electrolyte concentrations. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1258–1266, 2000