Cyclodextrin-grafted poly(phenylene ethynylene) with chemically-responsive properties

Water-soluble poly(phenylene ethynylene) carrying beta-cyclodextrin was prepared; the polymer exhibited a fluorescence color change or quenching, depending on the kind of guest.     

Photophysics,aggregation and amplified quenching of a water-soluble poly(phenylene ethynylene)

The fluorescence, absorption and fluorescence quenching properties of an anionic poly(phenylene ethynylene) are investigated in H2O and MeOH solutions.     

Self-assembly of amphiphilic poly(phenylene ethynylene)s in water-potassium dodecanoate-decanol lyotropic liquid crystals

Poly(phenylene ethynylene)s bearing a high density of branched amphiphilic side-chains self-assemble at the air-water interface and in water-potassium dodecanoate-decanol lyotropic liquid crystals.     

Negative differential resistance in phenylene ethynylene oligomers

The origin of the sharp peak profile (i.e., negative differential resistance, NDR) observed in the I/V curves of three-ring phenylene ethynylene oligomers is a topic of major current interest. Here, quantum-chemical calculations are performed to analyze the evolution of the one-electron structure of an unsubstituted three-ring oligomer under the influence of a static electric field (which models the driving voltage applied in the experiments). The results indicate that the rotation of the central ring of the oligomer induces resonant tunneling processes over a limited voltage range. This can thus be responsible for the NDR signature observed experimentally.     

Capture and detection of a quencher labeled oligonucleotide by poly(phenylene ethynylene) particles

Fluorescence quenching of poly(phenylene ethynylene) (PPE) particles by a Cy-5 labeled oligonucleotide is 2 orders of magnitude more sensitive than direct excitation of the Cy-5 fluorophore.     

Vibronic structures in the electronic spectra of oligo(phenylene ethynylene): effect of m-phenylene to the optical properties of poly(m-phenylene ethynylene)

At the low temperature, hidden vibronic structures are successfully resolved in the absorption and emission spectra of oligo(phenylene ethynylene)s 3-5. Identification of the hidden bands allows estimation of the vibrational energy gaps in these molecules, which appears to increase with the oligomer conjugation length. The remarkable similarity between the absorption profiles of diphenylacetylene (3) and 1,3-bis(phenylethynyl)benzene (5), especially at -198 degrees C, confirms the effectiveness of conjugation interruption at m-phenylene. The function of precise conjugation length control via m-phenylene is further demonstrated from poly(m-phenylene ethynylene) (PmPE) (6). Even though the number of recurring unit (phenylene ethynylene) increases from 2 (for 5) to 12 (for 6), the absorption and emission spectra of the latter are nearly identical to that of the former.     

Theoretical study of helix formation in substituted phenylene ethynylene oligomers

Theoretical investigations of the relative stabilities of helical vs extended forms of phenylene ethynylene oligomers established that MMFF molecular mechanics was more useful than AM1 or DFT for calculating helical structures and for estimating relative energies. At the level of MMFF, theory predicts that for o- or m-oligophenylene ethynylenes, helix formation is enthalpically favored for ester and ether-substituted oligomers. In contrast to simple electron-demand predictions, we predict that the position of substituents can make a substantial difference in the tendency to form helices.     

Luminescent core-shell photonic crystals from poly(phenylene ethynylene) coated silica spheres

We describe the preparation and characterization of a photonic crystal filled with a luminescent conjugated polyelectrolyte, sulfonated poly(phenylene ethynylene). The conjugated polymer was coated onto the nanospheres by the layer-by-layer method and assembled directly into a fluorescent opal structure avoiding the defects associated with post-filling schemes. These structures exhibit strong angle-dependent luminescent properties. By using multiple layers, we further demonstrate control over the emissive bands of the opal.     

Poly(phenylene ethynylene)s with alkoxyphenyl substituents

Two new poly(phenylene ethynylene)s with alkoxyphenyl substituents were synthesized and characterized. The polymers were amorphous, dissolved readily in common organic solvents, and showed glass‐transition temperatures at 162–175 °C. They showed blue photoluminescence both in solution and in the solid state due to the steric interaction between the substituents and the main chain that caused an interruption of the conjugation length. The quantum yields in a tetrahydrofuran solution were up to 0.63. Excimer emission was the dominant product of the photoexcitation of thin films of the polymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1449–1455, 2002     

Combinatorial synthesis of oligo(phenylene ethynylene)s

The combinatorial synthesis of oligo(phenylene ethynylene) tetramers, both in solution and on solid support, is described. These products are of interest for molecular electronics applications. An iterative sequence, coupling of aryl halides to alkynes under Sonogashira conditions, was used. Five monomers functionalized with electron-donating or electron-withdrawing groups were synthesized, and used to generate a library of 25 trimers in a solution-phase based process. A library of 24 tetramers was prepared by subsequent protodesilylation and coupling with the alligator clip 4-iodo-1-thioacetylbenzene. The solution-phase based sequence was successfully adapted to a higher yielding directed split-and-pool solid-phase process, with average yields of 78–86% for each step over seven steps. A triazene linker group was used to attach the starting monomer to the polymer beads. At the completion of the solid-phase-based process, traceless cleavage of trimers from the resin was achieved by sonication of the resin in 10% HCl/THF solution. The released products were then poised for the final step in the sequence, attachment of the alligator clip.     

Scanning tunneling microscopy of self-assembled phenylene ethynylene oligomers on Au(111) substrates

In this paper, we report the self-assembly, electrical characterization, and surface modification of dithiolated phenylene-ethynylene oligomer monolayers on a Au(111) surface. The self-assembly was accomplished by thiol bonding the molecules from solution to a Au(111) surface. We have confirmed the formation of self-assembled monolayers by scanning tunneling microscopy (STM) and optical ellipsometry, and have studied the kinetics of film growth. We suggest that self-assembled phenylene ethynylene oligomers on Au(111) surfaces grow as thiols rather than as thiolates. Using low-temperature STM, we collected local current-voltage spectra showing negative differential resistance at 6 K.     

Energy transfer in unsymmetrical phenylene ethynylene dendrimers

We have applied the fluorescence upconversion technique to explore the electronic excitation energy transfer in unsymmetrical phenylene ethynylene dendrimers. Steady-state emission spectra show that the energy transfer from the dendrons to the core is highly efficient. Ultrafast time-resolved fluorescence measurements are performed at various excitation wavelengths to explore the possibility of assigning absorption band structures to exciton localizations. We propose a kinetic model to describe the time-resolved data. Independent of the excitation wavelength, a typical rise-time value of 500 fs is measured for the fluorescence in the dendrimer without an energy trap, indicating initial delocalized excitation. While absorption is into delocalized exciton states, emission occurs from localized states. When an energy trap such as perylene is introduced on the dendrimer, varying the excitation wavelength yields different energy-transfer rates, and the excitation energy migrates to the trap through two channels. The interaction energy between the dendrimer backbone and the trap is estimated to be 75 cm(-1). This value is small compared to the vibronic bandwidth of the dendrimer, indicating that the monodendrons and the energy trap are weakly coupled.     

Enhanced fluorescence quenching in receptor-containing conjugated polymers: a calix[4]arene-containing poly(phenylene ethynylene)

A fluorescent poly(phenylene ethynylene) containing calix[4]arene-based receptor units has a sensitivity to quenching by the N-methylquinolinium ion that is over three times larger than that seen in a control polymer lacking calix[4]arenes.     

Electrochemical gate-controlled conductance of single oligo(phenylene ethynylene)s

We have studied electron transport properties of unsubstituted oligo(phenylene ethynylene) (OPE) (1) and nitro-substituted OPE (2) covalently bound to two gold electrodes. The conductance values of single 1 and 2 are approximately 13 and approximately 6 nS, respectively. In addition to a decrease in the conductance, the presence of the nitro moiety leads to asymmetric I-V characteristics and a negative differential resistance-like (NDR-like) behavior. We have altered the nitro-substituted OPE by electrochemically reducing the nitro group and by varying the pH of the electrolyte. The conductance decreases linearly with the electron-withdrawing capability (i.e., Hammett substituent values) of the corresponding reduced species. In contrast, the conductance of 1 is independent of the pH and the electrode potential.     

Effect of polymer chain length on membrane perturbation activity of cationic phenylene ethynylene oligomers and polymers

The interactions of poly(phenylene ethynylene)- (PPE-) based cationic conjugated polyelectrolytes (CPEs) and oligo(phenylene ethynylene)s (OPEs) with different model lipid membrane systems were investigated to gain insight into the relationship between molecular structure and membrane perturbation ability. The CPE and OPE compounds exhibit broad-spectrum antimicrobial activity, and cell walls and membranes are believed to be their main targets. To better understand how the size, in terms of the number of repeat units, of the CPEs and OPEs affects their membrane disruption activities, a series of PPE-based CPEs and OPEs were synthesized and studied. A number of photophysical techniques were used to investigate the interactions of CPEs and OPEs with model membranes, including unilamellar vesicles and lipid monolayers at the air/water interface. CPE- or OPE-induced dye leakage from vesicles reveals that the CPEs and OPEs selectively perturb model bacterial membranes and that their membrane perturbation abilities are highly dependent on molecular size. Consistent with dye-leakage assay results, the CPEs and OPEs also exhibit chain-length-dependent ability to insert into 1,2-dipalmitoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DPPG) monolayers. Our results suggest that, for PPE-based CPE and OPE antimicrobials, chain length can be tuned to optimize their membrane perturbation ability.     

Molecular junctions based on SAMs of cruciform oligo(phenylene ethynylene)s

Cruciform oligo(phenylene ethynylene)s (OPEs) with an extended tetrathiafulvalene (TTF) donor moiety (OPE5-TTF and OPE3-TTF) and their simple analogues (OPE5-S and OPE3) without conjugated substituents were used to form high-quality self-assembled monolayers (SAMs) on ultraflat gold substrates. Molecular junctions based on these SAMs were investigated using conducting-probe atomic force microscopy (CP-AFM). The TTF substituent changes the molecular orbital energy levels and decreases the HOMO-LUMO energy gap, resulting in a 9-fold increase in conductance for both TTF cruciform OPEs compared to the unsubstituted analogues. The difference in electrical transport properties of the SAMs was reproduced by the theoretical transport calculations for the single molecules.     

沉淀剂对含有氨侧基的聚苯撑乙炔发光性能的影响

通过单体4-[(2,5-二溴苯)乙炔基]苯胺和1,4-二乙炔基-2,5-二戊氧基苯之间的Sonogashira偶合反应合成了带有p-氨基苯乙炔基共轭侧基的聚对苯撑乙炔（(PAnPE）). 该共轭聚合物的THF溶液（(2××10-－5 mol•·L-－1）)在473和519 nm处呈现两个比较强的荧光发射峰. 通过调节在聚合物PAnPE-THF溶液中所加入三种沉淀剂（(甲醇、乙酸、稀盐酸溶液）)的体积比例, 来改变PAnPE分子链的聚集态结构, 进而研究对其发光性能的影响规律. 实验结果表明: 由于沉淀剂与聚合物PAnPE分子链之间相互作用能力与方式的不同, PAnPE两个荧光峰的发射强度因聚合物分子链聚集结构不同而呈现不同的变化规律, 这有助于实现在化学传感器中的应用.     

Synthesis of linear and V-shaped oligo(phenylene ethynylene) derivatives: geometric effects on photophysical properties

<正>A series of linear and V-shaped oligo(phenylene ethynylene) derivatives 1-3 were synthesized through sequent Sonogashira coupling and propargyl alcohol deprotection reaction in high yields.The alkoxy chains(i.e.,n-hexyloxy groups) were introduced to assure good solubility of compounds 1-3 in common solvents.The photophysical properties of 1-3 in solution depend strongly on the geometries of these compounds.     

Synthesis of oligo(phenylene ethynylene)s with dendrimer "shells" for molecular electronics

Two series of oligo(phenylene ethynylene)s (OPEs) with different dendrimer side groups have been designed and synthesized. The molecules contain thiol groups at both ends to enable interconnection between nanoscale gapped metallic electrodes. The different dendrimer groups act as "shells", allowing tailoring to the nanoscopic environment surrounding the OPE "core". Meanwhile, the dendrimer shells also act as spacers for the precise control of the packing density and intermolecular interaction between the OPE cores. [structure: see text].     

Polymers with alternating anthracene and phenylene building blocks linked by ethynylene and/or vinylene units: Studying structure‐properties‐relationships

Four conjugated polymers ( P1 – P4 ) consisting of alternating anthracene‐9,10‐diyl and 1,4‐phenylene building blocks connected via ethynylene as well as vinylene ( P1 and P2 ), ethynylene‐only ( P3 ), and vinylene‐only ( P4 ) moieties, respectively, were synthesized and studied. The phenylene units in all four polymers bear 2‐ethylhexyloxy side‐chains to promote good solubility. The three polymers with vinylene units ( P1 , P2 , and P4 ) were prepared using the Horner–Wadsworth–Emmons reaction. For the synthesis of the arylene‐ethynylene polymer P3, the palladium‐catalyzed Sonogashira cross‐coupling reaction was used. The polymers were characterized by NMR, Fourier transform infrared spectroscopy, and Raman spectroscopy. Photophysical, absorption and photoluminescence, and electrochemical properties were studied. Spectroscopic ellipsometry measurements were performed to gain more insight on the optical properties. In addition, the transport properties were investigated using admittance spectroscopy. The bulk hole mobility and its dependence on the electric field were evaluated for P1 and P2 . © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 129–143