Darstellung und Eigenschaften anionischer Fluoro-Komplexe von Mg-, Zn- und Al-Phthalocyanin(2−)

Preparation and Properties of Anionic Fluoro Complexes of Mg-, Zn-, and Al-Phthalocyanine(2?) By treatment of a suspension of MgPc(2?) · 2H₂O, ZnPc(2?), or XAlPc(2?) (X?F? I) in dichloromethane with TBAF · 3H₂O the crystalline salts TBA[MFPc(2?)] (M?Mg, Zn) and TBA[AlF₂Pc(2?)] · 2H₂O · O.3HF are isolated. Solutions of the pure salts are instable against hydrolysis. In the case of Al the complex anion [(AlFPc(2?))₂O]^2? is formed. The properties, cyclic voltammograms, i.r., Ra, and u.v.-vis-spectra are discussed.     

Simple preparations of Pd6Cl12, Pt6Cl12, and Qn[Pt2Cl8+n], n=1, 2 (Q=TBA+, PPN+) and structural characterization of [TBA][Pt2Cl9] and [PPN]2[Pt2Cl10].C7H8

The hexanuclear Pd6Cl12, i.e., the crystal phase classified as beta-PdCl2, was obtained by reacting [TBA]2[Pd2Cl6] with AlCl3 (or FeCl3) in CH2Cl2. The action of AlCl3 on PtCl42-, followed by digestion of the resulting solid in 1,2-C2H4Cl2 (DCE), CHCl3, or benzene, produced Pt6Cl12.DCE, Pt6Cl12.CHCl3, or Pt6Cl12.C6H6, respectively. Treating [TBA]2[PtCl6] with a slight excess of AlCl3 afforded [TBA][Pt2Cl9], whose anion was established crystallographically to be constituted by two "PtCl6" octahedra sharing a face. Dehydration of H2PtCl6.nH2O with SOCl2 gave an amorphous compound closely analyzing as PtCl4, reactive with [Q]Cl in SOCl2 to yield [Q][Pt2Cl9] or [Q]2[Pt2Cl10], depending on the [Q]Cl/Pt molar ratio (Q=TBA+, PPN+). A single-crystal X-ray diffraction study has shown [PPN]2[Pt2Cl10].C7H8 to contain dinuclear anions formed by two edge-sharing PtCl6 octahedra.     

H(x)TeV9O28]((5-x)-) (x=1 and 2): vanadotellurates with decavanadate structure

Two new vanadotellurates, [HTeV(9)O(28)](4-) and [H(2)TeV(9)O(28)](3-) have been synthesized and structurally characterized as tetra-n-butylammonium (TBA) salts: TBA(4)[HTeV(9)O(28)]·2CH(3)CN [triclinic, space group P ?1, a = 16.7102(6) ?, b = 17.4680(7) ?, c = 17.9634(7) ?, α = 74.412(1)°, β = 67.494(1)°, γ = 74.160(2)°, Z = 2] and TBA(3)[H(2)TeV(9)O(28)] [monoclinic, space group P2(1)/c, a = 13.0013(5) ?, b = 19.157(1) ?, c = 28.453(1) ?, β = 97.222(2)°, Z = 4]. The results of the structural analyses indicate that the four O atoms that bridge two V atoms on the Te side are the most basic ones in the structure. The results of density-functional theory (DFT) calculations support this view.     

Layered assemblies of a dialuminum-substituted silicotungstate trimer and the reversible interlayer cation-exchange properties

Two polyoxometalate assemblies, TBA(9)[{γ-H(2)SiW(10)O(36)Al(2)(μ-OH)(2)(μ-OH)}(3)] (1; TBA = tetra-n-butylammonium) and TBA(6)Li(3)[{γ-H(2)SiW(10)O(36)Al(2)(μ-OH)(2)(μ-OH)}(3)]·18H(2)O (2), were synthesized by trimerization of a dialuminum-substituted silicotungstate monomer. Both 1 and 2 possessed a layered structure composed of a basal sheet unit [TBA(3){γ-H(2)SiW(10)O(36)Al(2)(μ-OH)(2)(μ-OH)}(3)](6-) and interlayer cations. The interconversion between 1 and 2 reversibly took place through interlayer cation exchange.     

Production and reactions of organic-soluble lanthanide complexes of the monolacunary Dawson [alpha1-P2W17O61]10- polyoxotungstate

The incorporation of lanthanides into polyoxometalates provides entry to new classes of potentially useful materials that combine the intrinsic properties of both constituents. To utilize the [alpha1-Ln(H2O)4P2W17O61]7- species in applications of catalysis and development of luminescent materials, the chemistry of this family of lanthanide polyoxometalates in organic solvents has been developed. Organic-soluble polyoxometalate-lanthanide complexes TBA5H2[alpha1-Ln(H2O)4P2W17O61] (Ln = La(III), Sm(III), Eu(III), Yb(III)) were prepared and characterized by elemental analysis, acid-base titration, IR, 31P NMR, and mass spectrometry. The synthetic procedure involves a cation metathesis reaction in aqueous solution under strict pH control. A solid-liquid-phase transfer protocol yielded a unique species (TBA)8K3[Yb(alpha1-YbP2W17O61)2] with three ytterbium ions and two [alpha1-P2W17O61]10- polyoxotungstates. A centrosymmetric dimeric complex [{alpha1-La(H2O)4P2W17O61}2]14- was crystallized from aqueous solution and characterized by X-ray diffraction. ESI mass spectral analysis of the complexes TBA5H2[alpha1-Ln(H2O)4P2W17O61] shows that similar dimers exist in organic solution, in particular for the early lanthanides. Fragmentation in the mass spectrometer of the complexes from dry acetonitrile solution involves double protonation of an oxo ligand and loss of one water molecule. Low mass tungstate fragments combine into [(WO3)n]2- (n = 1-5) ions and their condensation products with phosphate. Reaction of TBA5H2[alpha1-Eu(H2O)4P2W17O61] with 1,10-phenanthroline or 2,2'-bipyridine showed an increase of the europium luminescence. This result is explained by the formation of a ternary complex of [alpha1-Eu(H2O)4P2W17O61]7- and two sensitizing ligands.     

Olefin epoxidation with hydrogen peroxide catalyzed by lacunary polyoxometalate [gamma-SiW10O34H2O2]4-

The tetra-n-butylammonium (TBA) salt of the divacant Keggin-type polyoxometalate [TBA](4)[gamma-SiW(10)O(34)(H(2)O)(2)] (I) catalyzes the oxygen-transfer reactions of olefins, allylic alcohols, and sulfides with 30 % aqueous hydrogen peroxide. The negative Hammett rho(+) (-0.99) for the competitive oxidation of p-substituted styrenes and the low value of (nucleophilic oxidation)/(total oxidation), X(SO)=0.04, for I-catalyzed oxidation of thianthrene 5-oxide (SSO) reveals that a strongly electrophilic oxidant species is formed on I. The preferential formation of trans-epoxide during epoxidation of 3-methyl-1-cyclohexene demonstrates the steric constraints of the active site of I. The I-catalyzed epoxidation proceeds with an induction period that disappears upon treatment of I with hydrogen peroxide. (29)Si and (183)W NMR spectroscopy and CSI mass spectrometry show that reaction of I with excess hydrogen peroxide leads to fast formation of a diperoxo species, [TBA](4)[gamma-SiW(10)O(32)(O(2))(2)] (II), with retention of a gamma-Keggin type structure. Whereas the isolated compound II is inactive for stoichiometric epoxidation of cyclooctene, epoxidation with II does proceed in the presence of hydrogen peroxide. The reaction of II with hydrogen peroxide would form a reactive species (III), and this step corresponds to the induction period observed in the catalytic epoxidation. The steric and electronic characters of III are the same as those for the catalytic epoxidation by I. Kinetic, spectroscopic, and mechanistic investigations show that the present epoxidation proceeds via III.     

Design and synthesis of new thiobarbituric acid metal complexes as potent protease inhibitors: spectral characterization,thermal analysis and DFT calculations

Five novel metal complexes of thiobarbituric acid (TBAH) have been prepared with the general formulae: [Ti(TBA)₂(H₂O)₂]Cl₂·2H₂O, [Pd(TBA)₂]·4H₂O, Na[Ag(TBA)₂(H₂O)₂]·4H₂O, [Hg(TBA)₂(H₂O)₂] and [Ce(TBA)₂(H₂O)₃]SO₄·H₂O. The complexes have been fully characterized employing physicochemical and diverse spectroscopic techniques (IR, UV–Vis, mass and ¹H NMR) as well as thermal analysis. Elemental analyses and spectroscopic data have showed that the stoichiometries of all complexes were 1:2. Thermal analysis measurements indicated that the complexes have good thermal stability. Density functional theory calculations were carried out at the B3LYP levels of theory with a double basis set, LANL2DZ basis set for titanium, palladium, cerium atoms, or LANL2MB basis set for silver, mercury atoms and 6-31+G(d,p) basis set for the other atoms. The optimized geometry of the ligand and its complexes was obtained based on the optimized structures. The ligand and its metal complexes act as protease inhibitors and repressed their enzymatic activity significantly.     

Hydrophobicity vs hydrophilicity: Effects of poly(ethylene glycol) and tert-butyl alcohol on H2O as probed by 1-propanol

The enthalpic interaction between 1-propanol (1P) molecules, , was evaluated in 1P-poly(ethylene glycol) (PEG)-H2O and 1P-tert-butyl alcohol (TBA)-H2O ternary mixtures. The model-free and experimentally accessible quantity, , indicates the effect of an additional 1P on the actual enthalpic situation of 1P in the mixture. It was shown earlier that the composition dependence of reflects the process how 1P modifies H2O. This pattern changes in the presence of a third component, PEG or TBA. The effects of PEG or TBA on the molecular organization of H2O were elucidated from these induced changes. Together with previous similar studies for the effects of methanol (ME), 2-propanol (2P), ethylene glycol (EG), and glycerol (Gly), we suggest a method and hence a possible scaling for sorting out hydrophobicity vs hydrophilicity of these alcohols by the changes induced to the loci of the maxima in . We show that hydrophilicity scales with the number of oxygen, regardless of whether O is the ether -O- or the hydroxyl -OH. Hydrophobicity also scales with the number of carbon atoms for alcohols without a methyl group. For those with methyl groups, the hydrophobicity seems proportional to the total number of carbon with a different proportionality factor from those without methyl group.     

Polyoxometalate-based metal organic frameworks (POMOFs): structural trends, energetics, and high electrocatalytic efficiency for hydrogen evolution reaction

The grafting of the triangular 1,3,5-benzene tricarboxylate linkers (denoted trim) on tetrahedral ε-Keggin polyoxometalates (POMs) capped by Zn(II) ions, formed in situ under hydrothermal conditions, has generated three novel POM-based metal organic frameworks (POMOFs). (TBA)(3)[PMo(V)(8)Mo(VI)(4)O(36)(OH)(4)Zn(4)][C(6)H(3)(COO)(3)](4/3)·6H(2)O (ε(trim)(4/3)) is a 3D open-framework built of molecular Keggin units connected by trim linkers, with channels occupied by tetrabutylammonium (TBA) counterions. ε(trim)(4/3) is a novel (3,4)-connected net, named ofp for open-framework polyoxometalate, and computer simulations have been used to evaluate its relative stability in comparison with ctn- and bor-like polymorphs, showing the stability of this novel phase directly related to its greatest density. A computational study was also undertaken with the aim of locating TBA molecules, the positions of which could not be deduced from single crystal X-ray diffraction, and further rationalizes their structure directing role. In (TBA)(3)[PMo(V)(8)Mo(VI)(4)O(37)(OH)(3)Zn(4)][C(6)H(3)(COO)(3)] (ε(2)(trim)(2)), the building unit is not the molecular Keggin but a dimerized form of this POM. Their connection via trim linkers generates a 3D framework with channels filled by TBA cations. In (TBA)(3)[PMo(V)(8)Mo(VI)(4)O(37)(OH)(3)Zn(4)][C(6)H(3)(COO)(3)]·8H(2)O ([ε(trim)](∞)), zigzag chains are connected via the organic linkers, forming 2D grids. Modified electrodes were fabricated by direct adsorption of the POMOFs on glassy carbon or entrapment in carbon paste (CPE). A remarkable electrocatalytic hydrogen evolution reaction (HER) was detected with a yield greater than 95%, and a turnover number as high as 1.2 × 10(5) was obtained after 5 h. The reported POMOF-based electrodes are more active than platinum, with a roughly 260 mV anodic shift. Finally, the electrocatalytic activities of ε(trim)(4/3)/CPE electrodes in various XCl (X = Li, Na, K, Cs) media have been studied. This allowed us to detect a cation effect and propose an electrocatalytic mechanistic pathway for the HER.     

Reactive N-protonated isocyanate species stabilized by bis(μ-hydroxo)divanadium(IV)-substituted polyoxometalate

O- or N-protonated? The bis(μ-hydroxo)divanadium(IV)-substituted γ-Keggin-type polyoxometalate (see picture, left) (TBA)(4)[γ-SiV(IV)(2)W(10)O(36)(μ-OH)(4)] (TBA = tetra(n-butyl)ammonium) was synthesized and characterized by X-ray crystallography. Its reaction with phenyl isocyanate gave (TBA)(4)[γ-SiV(IV)(2)W(10)O(38)(μ-OH)(2)(PhNHCO)(2)], which contains two N-protonated phenyl isocyanate species and catalyzes the cyclotrimerization of phenyl isocyanate.     

Effect of temperature and concentration on the structure of tert-butyl alcohol/water mixtures: near-infrared spectroscopic study

The effect of temperature and concentration on the structure of tert-butyl alcohol/water binary mixtures in the alcohol-rich region (X(H2O) < 0.3) has been studied by using Fourier transform near-infrared (FT-NIR) spectroscopy. The obtained results demonstrate that the addition of a small amount of water to tert-butyl alcohol (2-methyl-2-propanol, abbreviated as TBA) leads to minor changes in the structure of neat TBA and suggest that molecules of TBA in the mixture are in the same environment as those in pure TBA. The bands of water are red-shifted in the mixture relative to bulk water, implying that the molecules of water in TBA are involved in stronger hydrogen bonding. The present experimental data give no evidence for the existence of nonbonded water in the mixture. Even at a very low content of water, the main NIR bands of water (nu(2) + nu(3) and nu(1) + nu(3)) have two components showing markedly different behavior upon an increase in temperature. From the power spectra, it is seen that the extent of intensity changes due to the free OH groups of TBA is smaller in the mixture relative to pure TBA. All of these results support the model of chain-end bonding of water molecules to TBA associates. An increase in X(H2O) reduces the population of nonbonded OH groups of TBA, yet both processes do not appear at the same rate. The amount of bonded OH groups of water increases faster than that of the nonbonded ones. It seems that the water-water interaction becomes more important as X(H2O) increases. At high alcohol content, the position of the CH alkyl stretching bands is constant, evidencing a negligible role of the hydrophobic hydration in the mixture.     

Dititanium-containing 19-tungstodiarsenate(III) [Ti2(OH)2As2W19O67(H2O)]8-: synthesis, structure, electrochemistry, and oxidation catalysis

The dititanium-containing 19-tungstodiarsenate(III) [Ti(2)(OH)(2)As(2)W(19)O(67)(H(2)O)](8-) (1) has been synthesized and characterized by IR, TGA, elemental analysis, electrochemistry, and catalytic studies. Single-crystal X-ray analysis was carried out on Cs(8)[Ti(2)(OH)(2)As(2)W(19)O(67)(H(2)O)].2CsCl.12H(2)O (Cs-1), which crystallizes in the monoclinic system, space group P2(1)/m, with a=12.7764(19), b=19.425(3), c=18.149(3) A, beta=110.234(3) degrees, and Z=2. Polyanion 1 comprises two (B-alpha-As(III)W(9)O(33)) Keggin moieties linked through an octahedral {WO(5)(H(2)O)} fragment and two unprecedented square-pyramidal {TiO(4)(OH)} groups, leading to a sandwich-type structure with nominal C(2v) symmetry. Synthesis of 1 was accomplished by reaction of TiOSO(4) and K(14)[As(2)W(19)O(67)(H(2)O)] in a 2:1 molar ratio in aqueous, acidic medium (pH 2). Polyanion 1 could also be isolated as a tetra-n-butyl ammonium (TBA) salt, {(n-C(4)H(9))(4)N}(5)H(3)[Ti(2)(OH)(2)As(2)W(19)O(67)(H(2)O)] (TBA-1). TBA-1 was studied by cyclic voltammetry in acetonitrile (MeCN) solutions containing 0.1 M LiClO(4) and compared with the results obtained with Cs-1 in aqueous media. In MeCN, the Ti(IV) and W(VI) waves could not be separated distinctly. An important adsorption phenomenon on the glassy carbon working electrode was encountered both in cyclic voltammetry and in controlled potential electrolysis and was confirmed by Electrochemical Quartz Crystal Microbalance (EQCM) studies on a carbon film. TBA-1, dissolved in MeCN, reacts with H(2)O(2) to give peroxo complexes stable enough for characterization by UV-visible spectroscopy, cyclic voltammetry, and EQCM. TBA-1 shows high catalytic activity (TOF=11.3 h(-1)) in cyclohexene oxidation with aqueous H(2)O(2) producing products typical of a heterolytic oxidation mechanism. The stability of TBA-1 under turnover conditions was confirmed by using IR, UV-visible spectroscopy as well as cyclic voltammetry.     

Protonolysis of [((i)PrO)TiMo5O18]3-: access to a family of TiMo5 Lindqvist type polyoxometalates

The tetra-n-butylammonium (TBA) salts of [((i)PrO)TiMo(5)O(18)](3-) 1 and [((i)BuO)TiMo(5)O(18)](3-) 2 were prepared by hydrolysis of mixtures of (TBA)(2)[Mo(2)O(7)], (TBA)(4)α-[Mo(8)O(26)] and Ti(OR)(4) (R = (i)Pr or (i)Bu) in acetonitrile. Treatment of (TBA)(3)1 with alcohols ROH afforded primary and tertiary alkoxide derivatives [(RO)TiMo(5)O(18)](3-) (R = Me 3, (t)Bu 4), whilst aryloxides [(ArO)TiMo(5)O(18)](3-) were prepared by reacting 1 with phenols ArOH (Ar = C(6)H(4)Me-4 5, and C(6)H(4)CHO-2 6). Oxo-bridged [(μ-O)(TiMo(5)O(18))(2)](6-)7 rather than the hydroxo derivative [(HO)TiMo(5)O(18)](3-) was obtained upon hydrolysis of 1. X-Ray crystal structures of TBA salts of anions 3-7 show that titanium is six-coordinate in all cases, although titanium sites are disordered over two trans positions in 3. Mo-O bond length alternation is observed in the Mo(4)O(4) planes of 4 and 7 and in one of the two independent anions in the structure of 3. In solution, (17)O NMR spectra are consistent with the higher anionic charge compared to [Mo(6)O(19)](2-) and reveal an order of basicity for the anions [LM'Mo(5)O(18)](3-) associated with the ability of {LM'}(3+) to donate/withdraw electron density from {Mo(5)O(18)}(6-). Protonolysis reactions of 1 and 3 were slower than for tungstate analogues and the possibility of initial protonation at TiOM (M = Mo) rather than TiOR (M = W) in a proton-assisted S(N)1 mechanism for ligand exchange in [(RO)TiM(5)O(18)](3-) is discussed.     

Darstellung von trans-[Pt(ox)2X2]2− (X = Cl,Br, I,SCN, OH) durch oxydative Addition an [Pt(ox)2]2− in organischen Solventien

Preparation of trans-[Pt(ox)₂X₂]^2? (X = Cl, Br, I, SCN, OH) by Oxidative Addition to [Pt(ox)₂]^2? in Organic Solvents After extraction of [Pt(ox)₂]^2? with long-chain alkyl-ammonium ions into organic solvents the new Pt^IV complexes trans-[Pt(ox)₂X₂]^2?, X = Cl, Br, I, SCN, OH, are formed directly by oxidative addition. In nonpolar solvents the bulky organic cations prevent the formation of compounds with columnar structure which by partial oxidation in aqueous solution are formed immediately. The IR and Ra spectra of the stable anhydrous (TBA) salts are assigned according to point group D_2h. A characteristical dependence of the C?O, C? O, and Pt? O stretching modes in response to the oxidation state of the central ion is observed. There is vibrational fine structure in the absorption spectrum of [Pt(ox)₂]^2? measured at 10 K with long progressions by coupling of d—d transitions with v_s(Pt? O) and v_s(C?O). The characteristical feature in the UV/VIS spectra of the Pt^IV complexes is caused by intensive π(O, X) ← e_g(Pt) CT transitions.     

Effects of Al(i-Bu)_3 on Propylene Polymerization and Copolymerization by rac-Me_2Si(Ind)_2ZrCl_2/MAO

Propylenepolymerizationbystereorigidansa-Inetallocene/meUlyI-alulhinoxane(MAO)havebeenreportedbymanygroupsinrecentyears."'PolypropylenefromsuchSystemhasthechacteristicsofnarrowmolecularweightandcompositiondistributions,whichcannotbeproducedbytheconditionalheterogeneousZiegler-Nattacatalysts.Inarecentwork,M.C.SacchietaLrepoftedUleeffectsofaddingAl(i-C4Hg)3ahA)totherac-Et(Ind)ZZrCI,/MAOcatalyzedpropylene/1-hexenecopolymerizationSystem.'ItwasfoundthatbyaddingcertainamountsofTBAhlepoly…     

过氧钛钨硅杂多配合物的合成、表征及催化活性

合成了过氧钛钨硅杂多酸盐α-M6-mHm[SiW11(TiO2)O39].xH2O和α-M10-mHm[SiW9(TiO2)3O37].xH2O(M=K, TBA), 用IR, UV吸收光谱,极谱-循环伏安, 183W NMR, XPS和XRD等测试方法对其性质、结构进行研究。结果表明, 它们都是具有Keggin结构的过氧杂多配合物,TiO2基的引入将其极谱半波电位提高至-0.3V以上, 它们对顺丁烯二酸的H2O2环氧化反应具有显著高的催化活性。     

Long hydrogen-bonded rod of molecular oxide: a hexatantalate tetramer

A tetra-n-butylammonium (TBA) salt of [H(4.5)(Ta(6)O(19))](3.5-) was synthesized by reacting hydrous tantalum oxide with TBAOH. X-ray structural analysis of TBA(3.5)[H(4.5)(Ta(6)O(19))]·2THF·5.5H(2)O (THF = tetrahydrofuran) revealed that this compound consists of a hydrogen-bonded, rod-shaped tetramer of hexatantalate that is almost 30 ? long together with TBA cations and solvent molecules of crystallization [a = 20.6354(5) ?, b = 25.5951(7) ?, c = 37.2058(8) ?, α = 77.092(1)°, β = 86.177(1)°, γ = 88.683(1)°, V = 19110.9(8) ?(3), Z = 8, and space group P ?1]. (1)H NMR spectra showed that this tetrameric structure is maintained in solution.     

12-钼磷酸四丁基铵杂多蓝的光化学合成表征与晶体结构

用450W高压汞灯照射H3PMo12O40·5H2O和（Bu4N）Br（TBA）的DMF（N,N-二甲基甲酰胺）溶液,合成了12-钼磷酸四丁基铵杂多蓝（Bu4N）4[PMo12O40]·2DMF·H2O,用元素分析,IR,固体漫反射电子光谱,ESR,XPS和CV等进行了表征。晶体结构分析表明,标题化合物属单斜晶系,空间群P21/c,晶胞参数a=14.124（3）,b=17.481（4）,c=22.744（5）A,β=101.66（3）°,V=5500（2）A3,C70H160Mo12N6O43P,Mr=2956.29,Z=2,Dc=1.785g/cm3,F（000）=2970,μ（MoKα）=1.412mm-1,R=0.0638,wR=0.1975。标题化合物是由4个四丁基铵阳离子、1个12-钼磷混合价杂多阴离子[PMo12O40]4-、2个DMF分子和1个水分子构成。     

A dimeric titanium-containing polyoxometalate. Synthesis, characterization, and catalysis of H2O2-based thioether oxidation

The previously unknown titanium(IV)-containing mu-hydroxo dimeric heteropolytungstate (Bu4N)7[(PTiW11O39)2-OH] (TBA salt of H1) has been synthesized, starting from H5PTiW11O40, and characterized by elemental analysis, multinuclear (31P, 17O, 183W) NMR, IR, FAB-MS, cyclic voltammetry, and potentiometric titration. 31P NMR reveals that H1 (delta -12.76) readily forms in MeCN from the Keggin monomer (POM), PTiW11O40(5-) (2, delta -13.34), upon the addition of 1.5 equiv of H+, via the protonated species, P(TiOH)W11O39(4-) (H2, delta -13.44). The ratio of H1, 2, and H2, which are present in equilibrium in MeCN solution at 25 degrees C, depends on the concentration of both H+ and H2O. The Ti-O-Ti linkage readily reacts with nucleophilic reagents, such as H2O and ROH, to yield monomeric Keggin derivatives. mu-Hydroxo dimer H1 shows higher catalytic activity than 2 for thioether oxidation by hydrogen peroxide in acetonitrile. The reaction proceeds readily at room temperature and affords the corresponding sulfoxide and sulfone in ca. quantitative yield. The addition of H2O2 to H1 or H2 results in the formation of a peroxo complex, most likely the hydroperoxo complex P(TiOOH)W11O39(4-) (I), which has 31P NMR resonance at -12.43 ppm. The rate of the formation of I is higher from H2 than from H1. When H1 is used as a catalyst precursor, the rates of the thioether oxidation and peroxo complex formation increase with increasing H2O concentration, which favors the cleavage of H1 to H2. H2O2 in MeCN slowly converts 2 to another peroxotitanium complex, P(TiO2)W11O39(5-) (II), which has 31P NMR resonance at -12.98 ppm. Peroxo complexes I and II differ in their protonation state and interconvert fast on the 31P NMR time scale. Addition of 1 equiv of H+ completely converts II to I, while 1 equiv of OH- completely converts I to II. 31P NMR confirms that I is stable under turnover conditions (thioether, H2O2, MeCN). Contrary to two-phase systems such as dichloroethane/aqueous H2O2, no products resulting from the destruction of the Keggin POM were detected in MeCN in the presence of H2O2 (a 500-fold molar excess). The reactivity of I, generated in situ from II by adding 1 equiv of H+, toward organic sulfides under stoichiometric conditions was confirmed using both 31P NMR and UV-vis spectroscopy. This is a rare demonstration of the direct stoichiometric oxidation of an organic substrate by a titanium peroxo complex.     

Enthalpies of transfer of 2-methyl-2-propanol from water to mixtures of water with methanol,ethanol and 1,4-dioxane

The enthalpies of transfer of 2-methyl-2-propanol (TBA) from water to mixtures of water with methanol, ethanol and 1,4-dioxane have been measured. The data are considered in terms of recently developed theory, and it is found that the enthalpies of transfer can be reproduced quantitatively over most of the composition range in each solvent system. The parameters recovered from the analyses indicate that the net effect of TBA on the solvent structure is a breaking of solvent-solvent bonds and that TBA is preferentially hydrated in the aqueous alcohol systems, but randomly solvated in the water+1,4-dioxane system. It is also found that the model parameters for TBA solvation in the alcohol systems are independent of the alcohol.