Photophysics of Supercomplexes. Adduct between Ru(bpy)(CN)(4)(2-) and the [32]ane-N(8)H(8)(8+) Polyaza Macrocycle

The formation of a supercomplex between the Ru(bpy)(CN)(4)(2-) (bpy = 2,2'-bipyridine) complex and the [32]ane-N(8)H(8)(8+) macrocycle (1) has been studied in water and in acetonitrile. In acetonitrile, supercomplex formation is accompanied by (i) large hypsochromic shifts in the absorption spectrum (color changes from deep violet to yellow) and in the emission spectrum, (ii) large anodic shifts in standard oxidation (0.73 V) and reduction (0.37 V) potentials, (iii) typical shifts of (1)H-NMR signals for the macrocycle N-bound protons and the complex bipyridine protons, and (iv) a large increase in the MLCT excited-state lifetime of the complex. In water, the spectral shifts and the changes in standard potential are much less pronounced, but supercomplex formation is evidenced by (13)C-NMR (and (1)H-NMR) and by emission lifetime changes. In both solvents, supercomplex formation is complete in 1:1, 1.0 x 10(-4) M solutions, indicating very large stability constant values. A structure of the supercomplex with the macrocycle bound in a "boat" conformation to the four cyanide ligands of the complex, plausible in terms of molecular models, is consistent with all the experimental data. In water, the supercomplex further associates with added negative species containing carboxylate functions, as shown by partial reversal of the lifetime changes. When the added species is also a potential electron transfer quencher (such as, e.g., Rh(dcb)(3)(3-), dcb = 4,4'-dicarboxy-2,2'-bipyridine), however, association is not accompanied by quenching. This behavior is attributed to the structure of the supercomplex-quencher adduct, in which the macrocycle acts as an insulating spacer between the excited complex and the quencher.     

Binding of nitrate to a CuII-cyclen complex bearing a ferrocenyl pendant: synthesis, solid-state X-ray structure, and solution-phase electrochemical and spectrophotometric studies

The reaction of Cu(NO3)2.3H2O with the ligand 1-(ferrocenemethyl)-1,4,7,10-tetraazacyclododecane (L) in acetonitrile leads to the formation of a blue complex, [Cu(L)(NO3)][NO3] (C1). The X-ray structure determination shows an unexpected binding of a nitrate anion in that the CuII center is surrounded by four N atoms of the 1,4,7,10-tetraazacyclododecane (cyclen) macrocycle and two O atoms from a chelating nitrate anion, both Cu-O distances being below the sums of the van de Waals radii. Hydrogen-bonding interactions in the crystal lattice and a weak interaction between a second nitrate O and the CuII center in C1 give rise to a highly distorted CuII geometry relative to that found in the known structure of [Cu(cyclen)(NO3)][NO3] (C5). Electrochemical studies in acetonitrile containing 0.1 M [Bu4N][NO3] as the supporting electrolyte showed that oxidation of C1 in this medium exhibits a single reversible one-electron step with a formal potential E degrees f of +85 mV vs Fc0/+ (Fc = ferrocene). This process is associated with oxidation of the ferrocenyl pendant group. Additionally, a reversible one-electron reduction reaction with an E degrees f value of -932 mV vs Fc0/+, attributed to the CuII/I redox couple, is detected. Gradual change of the supporting electrolyte from 0.1 M [Bu4N][NO3] to the poorly coordinating [Bu4N][PF6] electrolyte, at constant ionic strength, led to a positive potential shift in E degrees f values by +107 and +39 mV for the CuII/I(C1) and Fc0/+(C1) redox couples, respectively. Analysis of these electrochemical data and UV-vis spectra is consistent with the probable presence of the complexes C1, [Cu(L)(CH3CN)2]2+ (C2), [Cu(L)(CH3CN)(NO3)]+ (C3), and [Cu(L)(NO3)2] (C4) as the major species in nitrate-containing acetonitrile solutions. In weakly solvating nitromethane, the extent of nitrate complexation remains significant even at low nitrate concentrations, due to the lack of solvent competition.     

Anion binding studies of fluorinated expanded calixpyrroles

The anion binding properties of fluorinated calix[n]pyrroles (n = 4-6) in aprotic solvents (acetonitrile and DMSO) and modified reaction conditions allowing for the synthesis and isolation of the hitherto missing dodecafluorocalix[6]pyrrole from the condensation of 3,4-difluoro-1H-pyrrole and acetone are described. In acetonitrile solution containing 2% water, the association constants for the 1:1 binding interaction between octafluorocalix[4]pyrrole and chloride anion obtained with isothermal titration calorimetry (ITC) and (1)H NMR titration methods were found to match reasonably well. As compared to its nonfluorinated congener, octafluorocalix[4]pyrrole was found to display enhanced binding affinities for several representative anions in pure acetonitrile as judged from ITC analyses. Similar analyses of the fluorinated calix[n]pyrroles revealed an increase in the relative affinity for bromide over chloride with increasing macrocycle size, as manifest in a decrease in the binding ratio K(a(Cl))/K(a(Br)). Anion binding studies in the solid state, involving single-crystal X-ray diffraction analyses of the chloride and acetate anion complexes of octafluorocalix[4]pyrrole and decafluorocalix[5]pyrrole, respectively, confirmed the expected hydrogen bond interactions between the pyrrolic NH protons and the bound anions.     

Binding of inorganic oxoanions to macrocyclic ligands: effect of the degree of protonation on supramolecular assemblies formed by phosphate and [18]aneN(6)

Five macrocycle-oxoanion adducts have been isolated from aqueous solutions containing 1,4,7,10,13,16-hexaazacyclooctadecane ([18]aneN(6), L) and phosphoric acid whose pH had been adjusted to selected values in the 1-8 range. Four products, (H(6)L)(H(2)PO(4))(6).2H(3)PO(4) (1), (H(6)L)(H(2)PO(4))(6) (2), (H(4)L)(H(2)PO(4))(4).2H(2)O (4), and (H(4)L)(HPO(4))(2).7H(2)O (5) crystallized from aqueous solutions at pH 1, 3, 6, and 8, respectively, while (H(4)L)(H(2)PO(4))(4) (3) crystallized on diffusion of EtOH into an aqueous reaction mixture at pH 6. Single-crystal X-ray structure determinations enabled an examination of supramolecular interactions between protonated forms of [18]aneN(6), phosphoric acid and its conjugate bases, and water of solvation. The macrocycle adopts a variety of conformations in order to accommodate the supramolecular constructs formed by the oxoanions and solvent molecules as the relative proportions of interacting species are altered. At pH 1 and 3, the fully protonated macrocycle, [LH(6)](6+), is found with six H(2)PO(4)(-) anions. At pH 6 and 8, the tetraprotonated macrocycle, [LH(4)](4+), crystallizes with four H(2)PO(4)(-) and two HPO(4)(2)(-), respectively. Variations in the solute of crystallization are evident, with phosphoric acid being present at the lowest pH and water at pH 6 and 8. In 5, the seven unique water molecules form a string-of-pearls motif within which a new heptameric isomer, consisting of a water pentamer that uses a single water to interact with the other two unique water molecules, is found. Structures 1, 2, 4, and 5 exhibit eta-3 H-bonding of ammonium protons to a single oxygen of the guest phosphates located above and below the macrocyclic ring. In 3, two phosphate oxygens of the cavity anion interact with the macrocycle, one of which participates in eta-2 H-bonding with ammonium groups.     

Influence of electronic and structural effects on the oxidative behavior of nickel porphyrins

With the aim of better understanding the electronic and structural factors which govern electron-transfer processes in porphyrins, the electrochemistry of 29 nickel(II) porphyrins has been examined in dichloromethane containing either 0.1 M tetra-n-butylammonium perchlorate (TBAP) or tetra-n-butylammonium hexafluorophosphate (TBAPF(6)) as supporting electrolyte. Half-wave potentials for the first oxidation and first reduction are only weakly dependent on the supporting electrolyte, but E(1/2) for the second oxidation varies considerably with the type of supporting electrolyte. E(1/2) values for the first reduction to give a porphyrin pi-anion radical are effected in large part by the electronic properties of the porphyrin macrocycle substituents, while half-wave potentials for the first oxidation to give a pi-cation radical are affected by the substituents as well as by nonplanar deformations of the porphyrin macrocycle. The potential difference between the first and second oxidations (Delta/Ox(2) - Ox(1)/) is highly variable among the 29 investigated compounds and ranges from 0 mV (two overlapped oxidations) to 460 mV depending on the macrocycle substituents and the anion of the supporting electrolyte. The magnitude of Delta/Ox(2) - Ox(1)/ is generally smaller for compounds with very electron-withdrawing substituents and when TBAP is used as the supporting electrolyte. This behavior is best explained in terms of differences in the binding strengths of anions from the supporting electrolyte (ClO(4)(-) or PF(6)(-)) to the doubly oxidized species. A closer analysis suggests two factors which are important in modulating Delta/Ox(2) - Ox(1)/ and thus the binding affinity of the anion to the porphyrin dication. One is the type of pi-cation radical (a proxy for the charge distribution in the dication), and the other is the conformation of the porphyrin macrocycle (either planar or nonplanar). These findings imply that the redox behavior of porphyrins can be selectively tuned to display separate or overlapped oxidation processes.     

Influence of charge on anion receptivity in amide-based macrocycles

Binding and structural aspects of anions with tetraamido/diquaternized diamino macrocyclic receptors containing m-xylyl, pyridine, and thiophene spacers are reported. (1)H NMR studies indicate that the quaternized receptors display higher affinities for anions compared to corresponding neutral macrocycles. The macrocycles containing pyridine spacers consistently display higher affinity for a given anion compared to those with either m-xylyl or thiophene spacers. The m-xylyl- and pyridine-containing receptors exhibit high selectivity for H(2)PO(4)(-) in DMSO-d(6) with association constants, K(a) = 1.09 × 10(4) and >10(5) M(-1), respectively, and moderate selectivity for Cl(-) with K(a) = 1.70 × 10(3) and 5.62 × 10(4) M(-1), respectively. Crystallographic studies for the Cl(-) and HSO(4)(-) complexes indicate that the m-xylyl-containing ligand is relatively elliptical in shape, with the two charges at ends of the major axis of the ellipse. The anions are hydrogen bonded with the macrocycle but are outside the ligand cavity. In the solid state, an unusual low-barrier hydrogen bond (LBHB) was discovered between two of the macrocycle's carbonyl oxygen atoms in the HSO(4)(-) complex. The pyridine-containing macrocycle folds so that the two pyridine units are face-to-face. The two I(-) ions are chelated to the two amides adjacent to a given pyridine. In the structure of the thiophene containing macrocycle with two BPh(4)(-) counterions, virtually no interaction was observed crystallographically between the macrocycle and the bulky anions.     

Methoxide of an Anderson-type polyoxometalate and its conversion to a new type of species, [IMo9O32(OH)(OH2)3]4-

A totally new type of polyoxometalate, [IMo(9)O(32)(OH)(OH(2))(3)](4)(-), has been synthesized by reacting [IMo(6)O(22)(OMe)(2)](3)(-) with water. The [IMo(9)O(32)(OH)(OH(2))(3)](4)(-) anion further transforms into [(IMo(7)O(26))(2)](6)(-), a molecular oxide that has a rutile core, in dry acetonitrile, while it stays intact for several hours in wet acetonitrile.     

Ion pairing in tetraphenylporphyrin oxidation: a semiquantitative study

In 1,2-difluorobenzene (DFB), electrolyte conductivity measurements and cyclic voltammetric titration on the traditional benchmark tetraphenylporphyrin, H(2)tpp, permit the first estimate of ion pair association constants for singly- and doubly-oxidized free-base porphyrins. From ion titration cyclic voltammetry and digital simulation, measured association constants for H(2)tpp(+)X(-) were 65, 120, 210, 520 and 730 M(-1), for X(-)= PF(6)(-), ClO(4)(-), NTf(2)(-), BF(4)(-) and OTf(-), respectively, relative to the association constant for the H(2)tpp(+)TFPB(-) complex. By similar methods it was found that the association constants for the corresponding dication, H(2)tpp(2+), were at least 3.0 x 10(4) M(-1)(PF(6)(-)), 2.5 x 10(6) M(-1)(ClO(4)(-)), 5.2 x 10(5) M(-1)(NTf(2)(-)), 1.9 x 10(6) M(-1)(BF(4)(-)) and 2.7 x 10(6) M(-1)(OTf(-)). We demonstrate that differences in association constants allow the formal potential of the second oxidation of H(2)tpp to be shifted by more than 800 mV simply by varying the solvent and electrolyte. In addition, calculated electrostatic potential energy maps for porphyrin dications suggest that exposure of the core N-H groups is responsible for the change in ordering of anion affinities that occurs upon oxidation of H(2)tpp(+).     

Selective recognition of monohydrogen phosphate by fluorescence enhancement of a new cerium complex

Bis(8-hydroxy quinoline-5-solphonate) cerium(III) chloride (Ce(QS)(2)Cl) (L) was synthesized and then used as a novel fluorescent sensor for anion recognition. Preliminarily study showed that fluorescence of L enhanced selectively in the presence of HPO(4)(2-) ion. This enhancement is attributed to a 1:1 complex formation between L and HPO(4)(2-) anion. The association constant of 1:1 complex of L-HPO(4)(2-) was calculated as 3.0×10(6). Thus, L was utilized as a basis for a selective detection of HPO(4)(2-) anion in solution. The linear response range of the proposed fluorescent chemo-sensor covers a concentration range of HPO(4)(2-) from 3.3×10(-7) to 5.0×10(-6) mol L(-1) with a detection limit of 2.5×10(-8) mol L(-1). L showed selective and sensitive fluorescence enhancement response toward HPO(4)(2-) ion in comparison with I(3)(-), NO(3)(-), CN(-), CO(3)(2-), Br(-), Cl(-), F(-), H(2)PO(4)(-) and SO(4)(2-) ions. It was probably attributed to the higher stability of the inorganic complex between HPO(4)(2-) ion and L. The method was successfully applied for analysis of phosphate ions in some fertilizers samples.     

Synthetic model of the phosphate binding protein: solid-state structure and solution-phase anion binding properties of a large oligopyrrolic macrocycle

The macrocyclic receptors 4-6 were synthesized via the anion-templated condensation of appropriately chosen dialdehyde and diamine building blocks. Whereas all three products could be obtained directly via the appropriate choice of reaction conditions, the larger [3+3] product, 6, which incorporates three of each precursor subunit, could also be obtained conveniently via an indirect procedure involving ring expansion of the smaller [2+2] macrocycle 4. As detailed earlier (Sessler, J. L.; Katayev, E. A.; Pantos, G. D.; Reshetova, M. D.; Khrustalev, V. N.; Lynch, V. M.; Ustynyuk, Y. A. Angew. Chem. 2005, 117, 7552-7556; Angew. Chem., Int. Ed. 2005, 44, 7386-7390), this ring expansion occurs under thermodynamic control in the presence of HSO4- and H2PO4- anions in acetonitrile solution and serves to effect the conversion of 4 to 6. An analysis of the X-ray crystal structure of complex 6H22+.HPO42- revealed a strong resemblance to the active site of the phosphate binding protein (PBP) with similar structural analogies being drawn between the active site of the sulfate binding protein (SBP) and the corresponding hydrogensulfate anion complex. In both cases, the anions are bound in a 1:1 fashion in the solid state through a complementary hydrogen bond network involving both the receptor 6 and the anions. UV-vis spectroscopic titrations provide support for the conclusion that macrocycle 6 binds the hydrogensulfate and dihydrogenphosphate anion (studied as the corresponding tetrabutylammonium salts) with high selectivity and affinity in acetonitrile (log Ka for the first binding interaction approaching 7), albeit with different receptor-to-anion binding stoichiometries (1:1 vs 1:3 for HSO4- and H2PO4-, respectively).     

A ferrocenyl-guanidine derivative as a highly selective electrochemical and colorimetric chemosensor molecule for acetate anions

A highly preorganized chemosensor molecule 1 based on a ferrocenyl-guanidine decorated with a chromogenic aryl azo moiety recognizes the acetate anion in acetonitrile solution. At first, receptor 1 underwent two-step oxidation events. Initially, oxidation of 1 occurs at the Fe(II) centre (E(p) = 440 mV) to form a ferrocenium species, followed by fast electron transfer from the guanidine moiety of the receptor to the Fe(III) centre with concomitant generation of an Fe(II) species with a radical cation centred at the nitrogen atom. In the second step, the radical cation species formed should undergo electrochemical oxidation at higher potential (E(p) = 830 mV). This assumption is supported by spectroelectrochemical studies. A remarkable cathodic shift (182 mV) of the ferrocene/ferrocenium oxidation peak (E(p) = 440 mV) and a progressive red-shift (Δλ = 30 nm) of the low energy band are observed in its absorption spectrum upon complexation of receptor 1 with the acetate anion. This change in the absorption spectrum is accompanied by a colour change from yellow to orange, which can be used for the "naked-eye" detection of this anion. Its monoprotonated form is able to selectively sense the less basic Cl(-), Br(-), NO(3)(-), and HSO(4)(-) anions: the oxidation redox peak at E(p) = 865 mV is cathodically shifted (107-182 mV).     

Reversed-phase liquid chromatography analysis of alkyl-imidazolium ionic liquids II. Effects of different added salts and stationary phase influence

Two mixtures of four 1-alkyl-3-methylimidazolium ionic liquids (ILs) salts associated to the anions tetrafluoroborate or hexafluorophosphate were analyzed by reversed-phase liquid chromatography with three different stationary phases: Kromasil C(8), Zorbax Extend C(18) and Zorbax Sb-Aq. The effect on retention of various inorganic salts (NaCl, NaH(2)PO(4,) NaBF(4), NaClO(4) and NaPF(6)) added to acetonitrile/water mobile phases was studied. The three columns gave similar separation profiles. In all cases, the retention of ILs increased with the increasing affinity of the inorganic anions for the apolar stationary phases; a phenomenon called chaotropicity. The chaotropic anion order is Cl(-) approximately H(2)PO(4)(-) < BF(4)(-) approximately ClO(4)(-) < PF(6)(-). It is established that the presence of chaotropic anions in the mobile phase do not permit to differentiate between ILs associated to different anions. However, chloride or dihydrogenphosphate added salts do not fully screen the retention differences between ILs associated with different anions. Distorted and even split peaks may appear in the chromatogram depending on the nature and concentration of the injected ILs. In the RPLC analysis of imidazolium-based IL, it is recommended to add to the mobile phase significant amounts of a salt containing a chaotropic anion. This salt addition will improve the IL peak shapes and give reproducible retention factors. LODs in the low microgram range ( approximately 5 nmol) were obtained with the Kromasil C(8) column with a 50/50 acetonitrile-water mobile phase containing 0.01 M NaPF(6) added salt and 230 nm UV detection.     

Synthesis and X-ray characterization of the phosphido-carbonyl cluster anions

The [Co(9)P(CO)(21)](2)(-) anion has been isolated from the products of the reaction between Na[Co(CO)(4)] and PCl(5) in tetrahydrofuran at reflux. The structure of the cluster anion [Co(9)P(CO)(21)](2)(-) in its tetraphenylphosphonium salt has been elucidated by X-ray analysis. The crystals are monoclinic, space group P2(1)/n, a = 12.528(3), b = 14.711(5), c = 19.312(6) A, beta = 93.68(2) degrees, Z = 2. Final R = 0.065 for 2300 unique reflections having I > 3sigma(I). The anion, which is disordered about an inversion center, consists of a monocapped square antiprismatic cluster containing an interstitial phosphide and surrounded by 13 terminal and 8 edge-bridging carbonyl ligands. Average values are: Co-Co 2.685 A, and Co-P 2.256 A. The [Co(10)P(CO)(22)](3)(-) anion has been obtained by condensation of the [Co(9)P(CO)(21)](2)(-) anion with [Co(CO)(4)](-) in tetrahydrofuran at reflux. While the [Co(9)P(CO)(21)](2)(-) anion is stable under CO, the [Co(10)P(CO)(22)](3)(-) anion is decomposed to [Co(9)P(CO)(21)](2)(-) and [Co(CO)(4)](-). The benzyltrimethylammonium salt of the [Co(10)P(CO)(22)](3)(-) anion has been studied by X-ray analysis. It gives triclinic crystals, space group P_1, a = 11.452(3), b = 23.510(6), c = 25.606(4) A, alpha = 112.46(1), beta = 95.79(1), gamma = 73.548(2) degrees, Z = 4. Final R = 0.041 for 8600 unique reflections having I > 3sigma(I). There are two independent trianions in the asymmetric unit, both showing similar geometries, consisting of bicapped square antiprismatic clusters with a central P atom, each bearing 10 terminal and 12 edge-bridging carbonyl ligands, 8 of which, bound to the capping metals, are markedly asymmetric. Average values are: Co-Co 2.678 A, and Co-P 2.262 A. Electrochemistry shows that [Co(9)P(CO)(21)](2)(-) and [Co(10)P(CO)(22)](3)(-) in acetonitrile solution undergo either a one-electron oxidation or a two-electron reduction. This latter process appears as a single step in the case of the dianion and as two separated one-electron steps in the case of the trianion. All the processes are accompanied by slow chemical complications, thus testifying that no stable redox congeners exist for these phosphide clusters.     

Group 9 Chalcogenometalates

The compounds [K(18-crown-6)](3)[Ir(Se(4))(3)] (1), [K(2.2.2-cryptand)](3)[Ir(Se(4))(3)].C(6)H(5)CH(3) (2), and [K(18-crown-6)(DMF)(2)][Ir(NCCH(3))(2)(Se(4))(2)] (3) (DMF = dimethylformamide) have been prepared from the reaction of [Ir(NCCH(3))(2)(COE)(2)][BF(4)] (COE = cyclooctene) with polyselenide anions in acetonitrile/DMF. Analogous reactions utilizing [Rh(NCCH(3))(2)(COE)(2)][BF(4)] as a Rh source produce homologues of the Ir complexes; these have been characterized by (77)Se NMR spectroscopy. [NH(4)](3)[Ir(S(6))(3)].H(2)O.0.5CH(3)CH(2)OH (4) has been synthesized from the reaction of IrCl(3).nH(2)O with aqueous (NH(4))(2)S(m)(). In the structure of [K(18-crown-6)](3)[Ir(Se(4))(3)] (1) the Ir(III) center is chelated by three Se(4)(2)(-) ligands to form a distorted octahedral anion. The structure contains a disordered racemate of the Deltalambdalambdalambda and Lambdadeltadeltadelta conformers. The K(+) cations are pulled out of the planes of the crowns and interact with Se atoms of the [Ir(Se(4))(3)](3)(-) anion. [K(2.2.2-cryptand)](3)[Ir(Se(4))(3)].C(6)H(5)CH(3) (2) possesses no short K.Se interactions; here the [Ir(Se(4))(3)](3)(-) anion crystallizes as the Deltalambdalambdadelta/Lambdadeltadeltalambda racemate. In the crystal structure of [K(18-crown-6)(DMF)(2)][Ir(NCCH(3))(2)(Se(4))(2)] (3), the K(+) cation is coordinated by an 18-crown-6 ligand and two DMF molecules and the anion comprises an octahedral Ir(III) center bound by two chelating Se(4)(2)(-) chains and two trans acetonitrile groups. The [Ir(Se(4))(3)](3)(-) and [Rh(Se(4))(3)](3)(-) anions undergo conformational transformations as a function of temperature, as observed by (77)Se NMR spectroscopy. The thermodynamics of these transformations are: [Ir(Se(4))(3)](3)(-), DeltaH = 2.5(5) kcal mol(-)(1), DeltaS = 11.5(2.2) eu; [Rh(Se(4))(3)](3)(-), DeltaH = 5.2(7) kcal mol(-)(1), DeltaS = 24.7(3.0) eu.     

Adsorption behavior of hexafluorophosphate on selected bonded phases

The adsorption behavior of ammonium hexafluorophosphate was studied on four HPLC columns packed with adsorbents of different ability for dispersive interactions using frontal chromatography with LC/MS detection in negative ESI mode. Hexafluorophosphate (PF(6)(-)) adsorption isotherms were measured from acetonitrile/water and methanol/water mixtures. Increased PF(6)(-) adsorption with increased acetonitrile content was found between 0 and 15% of acetonitrile in the eluent. Further increase of the acetonitrile concentration leads to an exponential decrease of PF(6)(-) adsorption. Methanol, on the other hand, causes a steady decrease of PF(6)(-) adsorption with increased organic concentration in the mobile phase.     

Mixed halo/hydroxy-carborane anions: thermally stable platforms for hydronium ion isolation

Hydroxylation of the robust, weakly coordinating hexahalo-carborane anion system, CB(11)H(6)Br(6)(-1), produces a new class of anion with mixed halo/hydroxyl substituents, HCB(11)(OH)(5)Br(6)(-1) which can be used to isolate a number of hydronium cation salts including an 'ice tautomer' composed of hydronium cation, anion hydroxyl groups and coordinated water molecules.     

Two new "onium" fluorosilicates, the products of interaction of fluorosilicic acid with 12-membered macrocycles: structures and spectroscopic properties

Two novel compounds, (L(1)H)(2)[SiF(6)] x 2H(2)O (1) and (L(2)H)(2)[SiF(5)(H(2)O)](2) x 3H(2)O (2), resulting from the reactions of H(2)SiF(6) with 4'-aminobenzo-12-crown-4 (L(1)) and monoaza-12-crown-4 (L(2)), respectively, were studied by X-ray diffraction and characterised by IR and (19)F NMR spectroscopic methods. Both complexes have ionic structures due to the proton transfer from the fluorosilicic acid to the primary amine group in L(1) and secondary amine group incorporated into the macrocycle L(2). The structure of 1 is composed of [SiF(6)](2-) centrosymmetric anions, N-protonated cations (L(1)H)(+), and two water molecules, all components being bound in the layer through a system of NH[...]F, NH[...]O and OH[...]F hydrogen bonds. The [SiF(6)](2-) anions and water molecules are assembled into inorganic negatively-charged layers via OH[dot dot dot]F hydrogen bonds. The structure of 2 is a rare example of stabilisation of the complex anion [SiF(5)(H(2)O)](-), the labile product of hydrolytic transformations of the [SiF(6)](2-) anion in an aqueous solution. The components of 2, i.e., [SiF(5)(H(2)O)](-), (L(2)H)(+), and water molecules, are linked by a system of NH[...]F, NH[...]O, OH[...]F, OH[dot dot dot]O hydrogen bonds. In a way similar to 1, the [SiF(5)(H(2)O)](-) anions and water molecules in 2 are combined into an inorganic negatively-charged layer through OH[...]F and OH[...]O interactions.     

Formation of a phosphorus-phosphorus bond by successive one-electron reductions of a two-phosphinines-containing macrocycle: crystal structures, EPR, and DFT investigations.

Chemical and electrochemical reductions of the macrocycle 1 lead to the formation of a radical monoanion anion [1](*)(-) whose structure has been studied by EPR in liquid and frozen solutions. In accord with experimental (31)P hyperfine tensors, DFT calculations indicate that, in this species, the unpaired electron is mainly localized in a bonding sigma P-P orbital. Clearly, a one-electron bond (2.763 A) was formed between two phosphorus atoms which, in the neutral molecule, were 3.256 A apart (crystal structure). A subsequent reduction of this radical anion gives rise to the dianion [1](2)(-) which could be crystallized by using, in the presence of cryptand, Na naphthalenide as a reductant agent. As shown by the crystal structure, in [1](2)(-), the two phosphinine moieties adopt a phosphacyclohexadienyl structure and are linked by a P-P bond whose length (2.305(2) A) is only slightly longer than a usual P-P bond. When the phosphinine moieties are not incorporated in a macrocycle, no formation of any one-electron P-P bond is observed: thus, one-electron reduction of 3 with Na naphthalenide leads to the EPR spectrum of the ion pair [3](*)(-) Na(+); however, at high concentration, these ion pairs dimerize, and, as shown by the crystal structure of [(3)(2)](2)(-)[(Na(THF)(2))(2)](2+) a P-P bond is formed (2.286(2) A) between two phosphinine rings which adopt a boat-type conformation, the whole edifice being stabilized by two carbon-sodium-phosphorus bridges.     

Bipyrrole- and dipyrromethane-based amido-imine hybrid macrocycles. New receptors for oxoanions

Three new amido-imine-type hybrid macrocycles based on substituted pyrrole units have been synthesized and shown to act as effective receptors for oxoanions in the solid state and in acetonitrile solution. One of the macrocycles in question, compound 15, was characterized by X-ray diffraction analysis as the free macrocycle and as a complex with sulfuric acid. A comparison of the resulting structures reveals that this receptor is capable of undergoing a conformational change and, as a consequence, varying the number of donor sites that can interact with a bound substrate. This system and the other two new receptors described in this work (macrocycles 14 and 16, respectively) display a high affinity toward oxoanions (studied as their tetrabutylammonium (TBA) salts), with association constants on the order of 10(7) M-1 being determined in acetonitrile solution using standard UV-vis spectroscopic titration methods. A competitive titration method was used to determine affinity constants in excess of ca. 10(6) M-1. Two of the receptors (14 and 15) were found to bind acetate, hydrogen sulfate, and dihydrogen phosphate anion well, and the bipyrrole-based receptor (14) was also found to bind the perrhenate anion. In contrast, the bis-dipyrromethane-derived receptor (16) was found to bind chloride anion preferentially. The unusual selectivity displayed by 16 for this spherical anion was rationalized on the basis of single-crystal X-ray diffraction data and DFT modeling calculations, which revealed a rigid structure appropriately suited for chloride anion recognition.     

Fluoride-selective colorimetric sensor based on thiourea binding site and anthraquinone reporter

A structurally simple colorimetric sensor, N-4-nitrobenzene-N'-1'-anthraquinone-thiourea (1), for anions was synthesized and characterized by (1)H NMR, ESI mass and IR methods. In acetonitrile, the addition of F(-) changed 1 solution from colorless to yellow. In the presence of other anions such as CH(3)CO(2)(-), H(2)PO(4)(-), HSO(4)(-) and Cl(-), however, the absorption spectrum of 1 was slightly red shifted with no obvious color changes observed. The association constants of anionic complexes followed the order of F(-)>CH(3)CO(2)(-)>H(2)PO(4)(-)>HSO(4)(-)>Cl(-)>Br(-), which was different from the order of anion basicity. AM1 calculation results indicated that the most stable configuration of 1 existed in the Z-E-conformation with a six-membered ring via intramolecular hydrogen bond. This made thiourea moiety of 1 in an unfavorable conformation to bond with oxygen-anionic substrates such as CH(3)CO(2)(-) and H(2)PO(4)(-), thus leading to a high selectivity and sensitivity for the detection of F(-).