Inclusion Complexes of Cyclodextrins with Tetrakis(4-carboxyphenyl)porphyrin and Tetrakis(4-sulfonatophenyl)porphyrin in Aqueous Solutions

In neutral and alkaline solutions, tetrakis(4-carboxyphenyl)porphyrin (TCPP) and tetrakis(4-sulfonatophenyl)porphyrin (TSPP) form 1:1 and 2:1 host–guest inclusion complexes with -cyclodextrin (-CD), -cyclodextrin (-CD), and 6-deoxy-6-diethylamino--CD (DEA--CD), except for DEA--CD in alkaline solution. On the other hand, TCPP and TSPP form only 1:1 inclusion complexes with 6-deoxy-6-dihexylamino--CD (DHA--CD). The limited solubilities of DEA--CD in alkaline solution and DHA--CD are likely responsible for no observation of the 2:1 inclusion complex containing DEA--CD in alkaline solution and that containing DHA--CD. The equilibrium constants (Ks) of TCPP and TSPP for the formation of the inclusion complexes have been estimated from the absorption and/or fluorescence intensity changes in neutral and alkaline solutions. The K₂ values, which are the equilibrium constants for the formation of the 2:1 host–guest inclusion complex from the 1:1 inclusion complex, are about one tenth the corresponding K₁ values, except for the -CD–TSPP system in alkaline solution. In neutral solution, where DEA--CD and DHA--CD are in protonated forms, the electrostatic force operates between DEA--CD (DHA--CD) and TCPP (TSPP), leading to the greater K values than those in alkaline solution, where DEA--CD and DHA--CD exist as neutral species.     

Darstellung und Kristallstruktur von Tetrakis(pentafluorphenylamino)silan

Synthesis and Crystal Structure of Tetrakis(pentafluorophenylamino)silane Colourless single-crystals of Tetrakis(pentafluorophenylamino) silane were obtained from the reaction of SiCl₄ with monolithiated pentafluoroaniline at low temperatures. The aminosilane has been characterized by various spectroscopic methods and its crystal structure has been determined by x-ray diffraction (for details see “Inhaltsübersicht”). Thermal condensation has not been achieved. However, reaction of silicon(IV)-chloride with pentafluoroaniline in the presence of triethylamine yielded the respective tricyclosilazane.     

Preparation of High-Purity Ammonium Tetrakis(pentafluorophenyl)borate for the Activation of Olefin Polymerization Catalysts

Homogeneous olefin polymerization catalysts are activated in situ with a co-catalyst ([PhN(Me)₂-H]⁺[B(C₆F₅)₄]⁻ or [Ph₃C]⁺[B(C₆F₅)₄]⁻) in bulk polymerization media. These co-catalysts are insoluble in hydrocarbon solvents, requiring excess co-catalyst (>3 eq.). Feeding the activated species as a solution in an aliphatic hydrocarbon solvent may be advantageous over the in situ activation method. In this study, highly pure and soluble ammonium tetrakis(pentafluorophenyl)borates ([Me(C₁₈H₃₇)₂N-H]⁺[B(C₆F₅)₄]⁻ and [(C₁₈H₃₇)₂NH₂]⁺[B(C₆F₅)₄]⁻) containing neither water nor Cl⁻ salt impurities were prepared easily via the acid–base reaction of [PhN(Me)₂-H]⁺[B(C₆F₅)₄]⁻ and the corresponding amine. Using the prepared ammonium salts, the activation reactions of commercial-process-relevant metallocene (rac-[ethylenebis(tetrahydroindenyl)]Zr(Me)₂ (1-ZrMe₂), [Ph₂C(Cp)(3,6-^tBu₂Flu)]Hf(Me)₂ (3-HfMe₂), [Ph₂C(Cp)(2,7-^tBu₂Flu)]Hf(Me)₂ (4-HfMe₂)) and half-metallocene complexes ([(η⁵-Me₄C₅)Si(Me)₂(κ-N^tBu)]Ti(Me)₂ (5-TiMe₂), [(η⁵-Me₄C₅)(C₉H₉(κ-N))]Ti(Me)₂ (6-TiMe₂), and [(η⁵-Me₃C₇H₁S)(C₁₀H₁₁(κ-N))]Ti(Me)₂ (7-TiMe₂)) were monitored in C₆D₁₂ with ¹H NMR spectroscopy. Stable [L-M(Me)(NMe(C₁₈H₃₇)₂)]⁺[B(C₆F₅)₄]⁻ species were cleanly generated from 1-ZrMe₂, 3-HfMe₂, and 4-HfMe₂, while the species types generated from 5-TiMe₂, 6-TiMe₂, and 7-TiMe₂ were unstable for subsequent transformation to other species (presumably, [L-Ti(CH₂N(C₁₈H₃₇)₂)]⁺[B(C₆F₅)₄]⁻-type species). [L-TiCl(N(H)(C₁₈H₃₇)₂)]⁺[B(C₆F₅)₄]⁻-type species were also prepared from 5-TiCl(Me) and 6-TiCl(Me), which were newly prepared in this study. The prepared [L-M(Me)(NMe(C₁₈H₃₇)₂)]⁺[B(C₆F₅)₄]⁻-, [L-Ti(CH₂N(C₁₈H₃₇)₂)]⁺[B(C₆F₅)₄]⁻-, and [L-TiCl(N(H)(C₁₈H₃₇)₂)]⁺[B(C₆F₅)₄]⁻-type species, which are soluble and stable in aliphatic hydrocarbon solvents, were highly active in ethylene/1-octene copolymerization performed in aliphatic hydrocarbon solvents.     

四(三苯基膦)化钯催化的若干菲啶类化合物的合成

邻甲酰基芳基硼酸与取代邻溴苯胺经四(三苯基膦)化钯催化偶联缩合, 合成了9个菲啶衍生物。邻溴苯胺的取代基无论是吸电子或供电子基团, 反应均可顺利进行。     

Formation of TiO2 Sols,Gels and Nanopowders from Hydrolysis of Ti(OiPr)4 in AOT Reverse Micelles

Titania sols, gels and nanopowders have been produced by the controlled hydrolysis of tetraisopropyltitanate (TPT) in sodium bis(2-ethylhexyl)sulfosuccinate (AOT) reverse micelles. Particle formation and aggregation have been investigated by photon correlation spectroscopy, the crystal phases by FT-Raman spectroscopy, and the crystallite dimensions of the precipitates by transmission electron microscopy. Nanoparticles could be produced at relatively high Ti(IV) concentrations (up to 0.05 mol dm^–3). These nanoparticles aggregated into sols, with colloid sizes of 20–300 nm, eventually forming gelatinous precipitates. The kinetics of particle formation and aggregation were controlled by varying the primary process parameters [TPT], [H₂O]/[AOT] (w₀), and [H₂O]/[Ti(IV)] (R), yielding a range of products including stable, transparent sols, precipitates and monolithic gels. The aggregation kinetics and physical properties of the sols depended strongly on w₀. Different titania phases were produced, depending on w₀; w₀ 6 yielded amorphous particles, while w₀ 10 produced anatase. The dimensions of the crystallites were comparable to those of the parent reverse micelles. A model was developed to interpret the effect of the primary process parameters on colloidal stability: (1) nucleation to form primary crystallites occurs by rapid hydrolysis and condensation reactions within the reverse micelle and (2) subsequent colloidal growth by aggregation occurs by reverse micellar exchange, where the rate of growth is governed by electrostatic and steric stability factors which increase as [AOT]/[TPT] (S) and residual [H₂O]/[AOT] (w_r) increase.     

Hydrolysis of titanium sulphate compounds

The influence of TiOSO₄ and free sulphuric acid concentrations in the starting solution on the degree of titanyl sulphate conversion to hydrated titanium dioxide and post-hydrolytic sulphuric acid was studied. Titanyl sulphate solution, an intermediate product in the commercial preparation of titanium dioxide pigments by sulphate route, was used. It was found that the degree of hydrolysis markedly depends on the studied parameters. The lower was the content of TiOSO₄ in the starting solution, the higher conversion was achieved. The degree of hydrolysis at the final stage varied between 81 % (420 g TiOSO₄ dm⁻³, 216 g H₂SO₄ dm⁻³) and 92 % (300 g TiOSO₄ dm⁻³, 216 g H₂SO₄ dm⁻³). The same relation was obtained when changing the concentration of free H₂SO₄ in the starting solution. The degree of hydrolysis at the final stage varied between 49 % (261 g H₂SO₄ dm⁻³, 340 g TiOSO₄ dm⁻³) and 96 % (136 g H₂SO₄ dm⁻³, 340 g TiOSO₄ dm⁻³). The particle size of the obtained hydrated titanium dioxide (HTD) also depends on the initial solution composition. Presented at the 34th International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 21–25 May 2007.     

三氯化钛水解法制备纳米金红石相氧化钛粉体

以TiCl_3为原料,通过控制盐浓度和水解温度可以在温和条件下制备出晶粒尺 寸为6～8 nm的金红石相氧化钛粉体,比表面为74.55 m~2/g,TEM照片显示粉体, 比表面为74.55 m~2/g, TEM照片显示粉体为钛状。苯酚的光催化降实验表明这种粉 体具有与P-25相关的光催化活性。采用（CH_3)_4NOH为注定剂,粉体经800 ℃煅烧 ,晶相由锐钛相全部转变为金红石相。     

具有聚集荧光增强性质的双(4-二乙氨基水杨醛)缩偶氮二甲酰肼二丁基锡的合成和晶体结构

在甲醇溶液中,卡巴肼、(4-二乙氨基)水杨醛和二乙酸二丁基锡"一锅法"反应,合成了一个新颖的基于双(4-二乙氨基水杨醛)缩偶氮二甲酰肼(L)的七配位有机锡配合物[Sn(L)(n-butyl)_2]n(T)。经元素分析、IR、(1H,119Sn,13C)NMR和X射线衍射晶体结构表征,T的晶体属单斜晶系C2/c空间群,中心锡周围由双(4-二乙氨基水杨醛)缩偶氮二甲酰肼的O,N配位原子占据赤道位置和2个丁基占据顶端位置形成畸变五角双锥构型。通过烯醇式氧原子的桥联配位作用,T向一维带状无限扩展产生"竹筏状"超分子结构。配合物T在二甲基甲酰胺、四氢呋喃、乙醇、甲醇和甲苯有机溶剂及其有机溶剂-水混合物中具有强荧光发射峰,当含水量的体积分数在0～10%(V/V)时具有良好的聚集荧光增强效应,含水量大于10%(V/V)时发生荧光淬灭。     

Dissipation of the plant growth regulator hexanoic acid 2-(diethylamino) ethyl ester in pakchoi and soil

A rapid and simple method for determining the plant growth regulator hexanoic acid 2-(diethylamino) ethyl ester (DA-6) in pakchoi and soil using gas chromatography-mass spectrometry (GC-MS) has been developed. For this purpose, a single step was used to extract DA-6 with dichloromethane from aqueous-acetone extracts of vegetables and soil. Average recoveries of DA-6 in pakchoi and soil were between 85% and 104% at both spiking levels 0.01 and 0.1 mg kg^?1. Relative standard deviations (RSD) were less than 11% for all of the recovery tests. The degradation of DA-6 in pakchoi and soil was studied. The results showed that DA-6 degradation in pakchoi and soil coincided with C = 3.9903 e^{?0.0516 t} , C = 0.3476 e^{?0.0224 t} , respectively; the half-lives were 13.43 h and 30.94 h in pakchoi and soil in Beijing, respectively.     

2-(5-溴-2吡啶偶氮)-5-二乙氨基酚显现人体皮肤表面镀锌工具遗留印迹

研究2-(5-溴-2吡啶偶氮)-5-二乙氨基酚(5-Br-PADAP)试剂显现镀锌工具遗留印迹的方法。 考察接触时间、时间间隔、试剂浓度、是否洗手等因素对印迹强度及分辨率的影响,并对该方法的可靠性进行验证。 实验结果表明,试剂浓度1 g/L、接触时间10 s以上,间隔时间不超过4 h条件下,均能显出较好的印迹。 该方法可以灵敏地显现镀锌工具遗留印迹,对非铁金属工具遗留印迹检测进行了很好地补充。     

Acyl- und Alkylidenarsane. VII. Tetrakis(2,2-dimethylpropionyl)diarsan - Darstellung und struktur

Acyl- and Alkylidenearsines VII Synthesis and Structure of Tetrakis(2,2-dimethylpropionyl)diarsine Lithium dihydrogenarsenide and 2,2-dimethylpropionyl chloride in a molar ratio of 3:2 react at ?40 to ?50°C in tetrahydrofuran or 1,2-dimethoxyethane to give the corresponding etherate of lithium bis(2,2-dimethylpropionyl)arsenide ( 2a ). Treatment of these solutions with stoichiometric amounts of 85% tetrafluoroboric acid · diethylether adduct yields yelloworange tetrakis(2,2-dimethylpropionyl)diarsine ( 5 ) in 64 or 62% yield resp., but not the expected bis (2,2-dimethylpropionyl)arsine ( 4a ). The very air-sensitive compound crystallizes in the monoclinic space group P2₁/n {?100 ± 3° C; a = 1224.6(3); b = 1419.7(3); c = 1333.1(3) pm; β = 96.22(2)°; Z = 4}. According to the X-ray structure analysis (R_w = 0.036) the molecule shows synclinal conformation; the two diacylarsyl-subunits are twisted against one another by an angle of 86°. As in another acylarsine [1] the As? C distances (203 to 205 pm) were found to be significantly longer then the standard value of 196 pm. Further characteristic bond lengths and angles are: As– 242; C? O 120 to 121 pm; As? As? C 88 to 107°; As? C? O 118 to 122°     

聚酯-酰胺的水解降解行为

研究了各种条件下聚酯-酰胺的水解降解行为及其与结构之间的关系。结果表明：酯键含量越高,质量损失就越快。聚合物的降解受酸、碱催化。根据SEM观察提出了可能发生的降解机理：表面腐蚀、非晶区腐蚀、晶区破坏到全部降解。     

四（五氟化苯基）卟啉氯化铁选择催化氧化超临界丙烷的反应机理

 以BHT为自由基捕捉剂，研究了四（五氟化苯基）卟啉氯化铁（Ⅲ）将超临界丙烷高选择性催化氧化为丙醇的反应机理．通过GC－MS分析发现，反应产物中有PBHT，故可认为在超临界丙烷氧化反应过程中有丙基自由基存在，初步推断反应涉及自由基机理．同时发现高浓度BHT抑制反应，低浓度BHT促进反应的现象，而以戊烷为底物时没有促进作用．这是由于BHT的位阻效应所致．并对BHT存在时超临界丙烷氧化反应机理进行了初步的推断．     

Conformational analysis of dicarbonyl(methylcyclopentadienyl)(2-(diethylamino)-2-oxoethyl)iron(II): a spectroscopic and molecular mechanics study

A combination of NMR and IR spectroscopic techniques was used to examine the conformational preferences of the previously unreported oxaallyliron compound dicarbonyl(methylcyclopentadienyl)(2-(diethylamino)-2-oxoethyl)iron(II) (1). IR studies revealed that 1 existed in n-pentane solutions as an equilibrium between two or more exchanging conformers through a rotation about the Fe---C bond. An additional contribution to the conformational dynamics of 1 was identified due to the resonance component of the amide group. The resonance contribution manifested in the observed restricted rotation about the C---N amide bond. Molecular mechanics calculations were used to model the conformational processes. The calculations predicted that the resonance stabilized conformation was the energetically preferred structure of 1. This agrees with the experimental evidence that identified the influence of resonance on the conformation of 1.     

Hydrolysis of Titanium Alkoxides: Thermochemical, Electron Microscopy, Saxs Studies

Hydrolysis of Ti(OR)₄ (R = Et, ⁱ Pr, ⁿ Bu) at various concentrations of titanium alkoxides and ratios h = [H₂O] /[Ti(OR)₄] is studied in alcoholic medium by means of calorimetry, electron microscopy, SAXS, and chemical analysis. The measured values for heat of hydrolysis of Ti(OR)₄ by excess water (– H _h ) at 298.15 K comprise 14.2, 64.9, 19.3 kJ/mol for R = Et, R = Et, ⁱ Pr, ⁿ Bu respectively. – H _h increases drastically in the region of 0h ratio. In the solid hydrolysis product with the composition TiO _x (OR)_4–2x ·y ROH, both x and y increase with increase of Ti(OR)₄ concentration in solution. Bushy network first formed in solution as a result of hydrolysis gradually structures with formation of well-shaped spherical particles with diameters 0.2m. SAXS curves analysis in the range of scattering vector values s = 0.07–4.26 nm^–1 for Ti(OBu)₄ hydrolysis products allows us to suggest their multilevel nature. Speculations on the structure of titanium oxobutoxide were made on the basis of the well-known structural data for crystalline first hydrolysis products of Ti(OEt)₄ and Ti(O ⁱ Pr)₄. It is suggested to perform hydrolysis of Ti(OBu)₄ with addition of water in two steps which allows us to decrease the rate of the solid precipitate formation, to regulate particles morphology in a wide range and to obtain well-shaped spherical species more than one micron in size. The influence of the powder size distribution on the grain growth during ceramic sintering is discussed.     

Polysulfonylamine. XLI. Ein Silber(I)-Hydrat ungewöhnlicher Zusammensetzung: Röntgenstrukturanalytische und thermochemische Charakterisierung von Tetrakis(dimesylamido)aquatetrasilber(I) [Ag4(N(SO2CH3)2}4(H2O)]

Polysulfonyl Amines. XLI. A Silver(I) Hydrate with an Unusual Composition: Characterization of Tetrakis(dimesylamido)aquatetrasilver(I) [Ag₄(N)SO₂CH₃)₂}₄(H₂O)] by X-Ray Diffraction and Thermal Analysis The title compound is obtained by crystallizing AgN(SO₂CH₃)₂ from water at room temperature. Crystallographic data (at ?95°C): Triclinic space group P1 , a = 864.6(4), b = 1 211.2(5), c = 1 399.1(5) pm, α = 90.97(3), β = 90.90(3), γ = 98.25(4)°, V = 1.4496 nm³, Z = 2, D_x = 2.608 Mg m^?3. The four independent silver atoms and the water molecule form zigzag chains Ag(1)-Ag(2)-(μ-H₂O)-Ag(3) …? Ag(4) …? Ag(1′) with distances Ag(1)-Ag(2) 309.7, Ag(2)-O(w) 241.8, O(w)-Ag(3) 241.4, Ag(3) …? Ag(4) 342.9, Ag(4) …? Ag(1′) 361.4 pm. The catenated silver atoms are further connected by the dimesylamide anions acting as tridentate bridging (α-O, N, ω-O)-ligands. The resulting strands are interconnected into layers through one O(S)-Ag′ contact (247 pm) and one hydrogen bond O(w)-H(l) …? O′(S) per repeating unit. Between the layers, a weak O(S) …? Ag″ interaction (271 ptn) and a hydrogen bond O(w)-H(2) …? O(S) per repeating unit are observed. The silver atoms Ag(l) to Ag(4) display the coordination numbers 5 [NO,Ag(2), distorted trigonal bipyramid], 5[NO₂,O(w)Ag(I), distorted trigonal bipyramid], 5[O₄,O(w), trigonal bipyramid], and 2 + 1 (N₂, li-near; plus a secondary Ag …? 0 contact). The dehydration of the title compound and a solid-solid phase transformation in anhydrous AgN(SO₂CH₃)₂, were quantitatively investigated by thermoconductometry and time- and temperature-resolved X-ray diffractometry (TXRD).     

Fabrication of Au/Titania Composite Nanodot Arrays from Au‐Loaded Block Copolymer Micellar Films

Summary: A simple route to an ordered array of metal/semiconductor oxide composite nanodots is presented. Micellar monolayer films of polystyrene‐block‐poly(2‐vinyl pyridine) (PS‐b‐P2VP) loaded with HAuCl₄ in the P2VP nanodomains are used as templates. TiO₂ is generated selectively within the polar P2VP domains of PS‐b‐P2VP/HAuCl₄ films by chemical vapor deposition of TiCl₄. Subsequent removal of the organic matrix by oxygen plasma or UV light leads to an array of Au/TiO₂ composite nanoparticles on the substrate surface.

Schematic illustration of the process to fabricate an array of Au/titania composite nanodots.     

4,5-四硫富瓦烯-双(2,3,6,7-二苯基-氮杂环庚烷-1-氧化物)的合成

为了发展转变点温度(Tc)高的有机磁性分子,设计合成了4,5-四硫富瓦烯－双(2,3,6,7-二苯基-氮杂环庚烷-1-氧化物)。反应混合物均经硅胶柱和设备HPLC分离和纯化,产物的结构由MS、^1^HNMR、^1^3CNMR等确定。     

Synthesis of (methylchlorosilyl)methyldichlorophosphines

(Methylchlorosilyl)methyldichlorophosphines have been synthesized by the reaction of [dimethy(diethylamino)silyl]- or [methyl-bis(diethylamino)silyl]methylmagnesium chlorides with PCl₃ in ether at –40÷–20 °C and subsequent treatment of the reaction mixture with dry HCl. The structures of the compounds thus obtained have been studied by³¹P,¹H, and¹³C NMR spectroscopy.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 989–990, May, 1993.     

Efficient Oxygen Reduction Reaction Using Ruthenium Tetrakis(diaquaplatinum)Octacarboxyphthalocyanine Catalyst Supported on MWCNT Platform

Electrocatalytic reduction of molecular oxygen in alkaline solution using a novel ruthenium tetrakis(diaquaplatinum)octacarboxyphthalocyanine (RuOCPcPt) electrocatalyst supported on multi‐walled carbon nanotube electrode has been described. We show that the oxygen reduction activity follows a direct 4‐electron transfer process at high kinetic rate constant, 3.57×10^?2 cm s^?1.