Ru/Al2O3-catalyzed transfer dehydrogenation of alcohols

Summary Primary and secondary alcohols were oxidized to their corresponding aldehydes or ketones in good yields using Ru/Al₂O₃ as catalyst in the presence of acetone. The catalyst can be recovered by simple filtration and reused after washing with acetone.     

Na4H3[SiW9Al3(H2O)3O37]·12H2O/H2O: a new system for selective oxidation of alcohols with H2O2 as oxidant

This work describes a catalytic system consisting of both Na₄H₃[SiW₉Al₃(H₂O)₃O₃₇]·12H₂O(SiW₉Al₃) and water as solvents (a small quantity of organic solvents were used as co-solvent for a few substrates) that can be good for selective oxidation of alcohols to ketones (aldehydes) using 30% H₂O₂ without any phase-transfer catalyst under mild reaction conditions. The catalyst system allows easy product/catalyst separation. Under the given conditions, the secondary hydroxyl group was highly chemoselectively oxidized to the corresponding ketones in good yields in the presence of primary hydroxyl group within the same molecule, and hydroxides are selectively oxidized even in the presence of alkene. Benzylic alcohols were selectively oxidized to the corresponding benzaldehydes in good yields without over oxidation products in solvent-free conditions. Nitrogen, oxygen, sulfur-based moieties, at least for the cases where these atoms are not susceptible to oxidation, do not interfere with the catalytic alcohol oxidation.     

Direct reductive amination and selective 1,2-reduction of α,β-unsaturated aldehydes and ketones by NaBH4 using H3PW12O40 as catalyst

A simple and convenient procedure for direct reductive amination of aldehydes and ketones with sodium borohydride is described. The reaction has been carried out in methanol in the presence of a catalytic amount of H₃PW₁₂O₄₀ (0.5 mol %). α,β-Unsaturated aldehydes and ketones can be easily converted into the corresponding allyl alcohols by reaction with H₃PW₁₂O₄₀ (0.5 mol %)/NaBH₄.     

Photocatalytic oxidation of primary and secondary benzylic alcohols to carbonyl compounds catalyzed by H3PW12O40/SiO2 under an O2 atmosphere

An efficient, selective and green procedure for the photocatalytic oxidation of primary and secondary benzylic alcohols to the corresponding aldehydes and ketones has been achieved using silica-encapsulated H₃PW₁₂O₄₀ as a recyclable heterogeneous photocatalyst in acetonitrile under oxygen gas as the sole reoxidant of the catalyst.     

Simple method for selective oxidation of 1,2-diols in water with KBrO3/KHSO4

Readily available off-the-shelf KBrO₃ and KHSO₄ have been used to selectively oxidize 1,2-diols in water as a solvent. Various cyclic 1,2-diols have been tolerated affording their corresponding α-hydroxy ketones in good yields.     

The first example of the C-3 alkylation of indoles with cyclopropyl ketones promoted by CeCl3·7H2O/LiI

Indoles undergo smooth alkylation with cyclopropyl ketones in the presence of the CeCl₃·7H₂O/LiI reagent system in refluxing acetonitrile under neutral conditions to produce the corresponding C-3 substituted indole derivatives in good to high yields and with high selectivity. The use of CeCl₃·7H₂O/LiI makes this method simple, convenient, and cost-effective.     

The catalytic olefination reaction of aldehydes and ketones with CBr3CF3

The new approach of catalytic olefination reaction (COR) has been used to convert aromatic and aliphatic aldehydes and ketones to 2-bromo-3,3,3-trifluoroprop-1-enes by the treatment of corresponding hydrazones with CBr₃CF₃ under copper(I) catalysis conditions. The reaction proceeds stereoselectively, the target alkenes were obtained in good yields.     

Theoretical investigation on regioselectivity of aromatic ketones in the addition with olefin catalyzed by RuH2(CO)(PPh3)3

Ab initio method is employed to study the structures of twelve aromatic ketones at HF/3-21G, HF/6-31G and HF/6-31G* levels, respectively. A theoretical analysis is also carried out to study the regioselectivity and reactivity of aromatic ketones in the addition with olefin catalyzed by RuH₂(CO)(PPh₃)₃. The results indicate that a U shape LUMO conjugation of aromatic ketones in a plane plays an important role in regioselectivity on the cleavage of β C-H bond and is a necessary factor to success of addition with olefin, and that steric effect is an indispensable factor in forming additional ortho-product. Meanwhile, electronic effect may influence the rate of addition for the structures alike which only have different replacements in the same site of aromatic ring, such as furan, thiophene and pyrole. A possible catalytic reaction mechanism is proposed that the addition of C-H bond may be carried out by a coordination of aromatic ketones with Ru complex.     

VB1-Al2O3-catalyzed one-pot condensation of aromatic ketone, aromatic aldehyde, and amide

A novel and green approach for the efficient synthesis of β-amido ketones using VB₁-Al₂O₃ as a heterogeneous catalyst for the first time from an aldehyde, enolizable ketones, and an amide in EtOH is described. The present methodology has several advantages from the economical and environmental points of view, such as simple procedure, low catalyst loading, high atom economy, and good yields.     

Synthesis of quinolines from amino alcohol and ketones catalyzed by [IrCl(cod)]2 or IrCl3 under solvent-free conditions

2-Aminobenzyl alcohol reacted with 2 equiv amount of ketones under the influence of [IrCl(cod)]₂ or IrCl₃ and KOH without any solvent, giving the corresponding quinoline derivatives in good yields.     

Dodecatungestophosphoric acid (H3PW12O40) as a solid green BrØnsted acid catalyzes high yielding and efficient trimethylcyanosylilation reactions of aldehydes and ketones by trimethylsilyl cyanide

An efficient solvent-free method is described for the addition of TMSCN to carbonyl groups employing dodecatungestophosphoric acid (H₃PW₁₂O₄₀) as a heterogeneous and environmentally benign catalyst. By this method, aromatic, aliphatic, cyclic and heterocyclic aldehydes and ketones are converted into their corresponding cyanotrimethylsilyl ethers in excellent yields (89-98%) in short reaction times (<10 min).     

Mild reduction of α-halo ketones to ketones promoted by PI3 or P2I4

PI₃ and P₂I₄ clearly reduce α-bromo and α-iodo ketones     

Use of CaH2 as a reductive hydride source: reduction of ketones and imines with CaH2/ZnX2 in the presence of a Lewis acid

A new combination reagent of CaH₂/ZnX₂ effectively reduced a variety of ketones and imines to the corresponding alcohols and amines, respectively, in the presence of a catalytic amount of a Lewis acid such as Ti(O-i-Pr)₄, Al(O-i-Pr)₃, B(O-i-Pr)₃ and ZnF₂.     

Singlet-triplet energy separations in divalent five-membered cyclic conjugated C5H3X, C4H3SiX, C4H3GeX, C4H3SnX, and C4H3PbX (X = H, F, Cl, and Br)

Singlet-triplet energy gaps in cyclopenta-2,4-dienylidene, as well as its 2- or 3-halogenated derivatives, are compared and contrasted with their sila, germa, stana, and plumba analogues; at HF/6-31G* and B3LYP/ 6-311++G(3df, 2p) levels of theory. Energy gaps (ΔG_t-s), between triplet (t) and singlet (s) states, appear linearly proportional to: (i) the size of the group 14 divalent element (M = C, Si, Ge, Sn and Pb), (ii) the angle ∠C-M-C, and (iii) the ΔG_(LUMO-HOMO) of the singlet state involved. The magnitude of ΔG_t-s, for each 2- and/or 3-substituted species studied, increases with an order of: carbenes < silylenes < germylenes < stanylenes < plumbylenes. This order reverses for the barriers of the ring puckering. The puckering occurs with more ease for every singlet, compared to its corresponding triplet form.Regardless of the group 14 element (M) employed, every 3-halo-substituted species is more stable than the corresponding 2-halo-substituted isomer. For M = Pb, Sn and/or Ge; 3-halo-substituted species have higher ΔG_t-s than their corresponding 2-halo-substituted analogues. For M = Si, similar ΔG_t-s are found for 2- and 3-halogenated isomers. For M = C, 3-halo-substituted species have lower ΔG_t-s than their corresponding 2-halo-substituted analogues.Every cyclic singlet has a larger ∠C-M-C angle, than its corresponding cyclic triplet state, except for 3-halosilacyclopenta-2,4-dienylidenes where triplet has a larger ∠C-M-C angle than its corresponding singlet state.     

B(C6F5)3-catalyzed oxidative deamination/cyclization cascade reaction of benzylamines and ketones for the synthesis of 2,4,6-triarylpyridines

The B(C₆F₅)₃-catalyzed oxidative deamination/cyclization cascade reaction of benzylamines and ketones for the construction of 2,4,6-triarylpyridines under metal-/solvent-free conditions has been successfully achieved. The advantages of this strategy include good functional group tolerance, low catalyst loading and high yields.     

Selective Propargylation of Carbonyl Compounds and Imines with Barium Reagents

A Barbier‐type regioselective propargylation of aldehydes and ketones with (3‐bromobut‐1‐ynyl)trimethylsilane has been achieved using reactive barium as a low‐valent metal in THF. Especially in the case of ketones, the corresponding homopropargylic alcohols form almost exclusively. In the reaction of α,β‐unsaturated carbonyl compounds, only 1,2‐adducts have been observed. This method is also applicable to propargylation of imines, and the corresponding homopropargylic amines are obtained regiospecifically in good yields with diastereomeric ratios of up to 87:13.     

KF/Al2O3 and PEG-400 as a recyclable medium for the selective α-selenation of aldehydes and ketones. Preparation of potential antimicrobial agents

2-Phenylseleno aldehydes and ketones were selectively obtained using solid-supported catalyst (KF/Al₂O₃) and PEG-400 as clean, recyclable medium in good to excellent yields. The method was applied in the preparation of highly functionalized 2-phenylseleno citronellal and citronellol, potential bactericide agents. The catalytic system KF/Al₂O₃ and PEG-400 can be re-used for four times without previous treatment.     

Easy α-alkylation of ketones with alcohols through a hydrogen autotransfer process catalyzed by RuCl2(DMSO)4

The electrophilic α-alkylation of ketones with alcohols is accomplished by a hydrogen autotransfer process catalyzed by RuCl₂(DMSO)₄. The reaction can produce either simple alkylated ketones or α,β-unsaturated ketones just by choosing the appropriate starting ketones (methyl ketones or bicyclic methylenic ketones, respectively), as well as quinolines (by using 2-aminobenzyl alcohol derivatives) or the corresponding alcohol derivatives by the addition of an extra equivalent of the initial alcohol. In the last case, after the above alkylation process reduction of the carbonyl compound takes place. A mechanistic study seems to indicate that the process goes through the oxidation of the alcohols with ruthenium (after a previous deprotonation) to yield the corresponding aldehyde and a ruthenium hydride intermediate. In turn, the aldehyde suffers a classical aldol reaction with the starting ketone to form the corresponding α,β-unsaturated ketone, which finally is reduced through a Michael-type addition by the aforementioned ruthenium hydride intermediate.     

Palladium catalyzed oxidation of Δ2, Δ3, and Δ4-unsaturated alcohols

Palladium (0.6~3 mol%) catalyses the oxidation of Δ², Δ³, and Δ₄ -unsaturated aloohols to the copresponding ketones in good yields, where bromomesitylene or bromobenzene ie used as an oxidant.     

SO42-/SnO2-Fe2O3固体酸催化下的环酮Baeyer-Villiger氧化反应及缩合反应

采用共沉淀的方法制备了不同Fe 掺杂量的SO₄^2-/SnO₂-Fe₂O₃固体超强酸催化剂. 利用傅里叶变换红外(FTIR)光谱, 粉末X射线衍射(XRD), N₂吸附-脱附实验(BET), 热重(TG)分析和扫描电镜(SEM)等方法对样品进行了表征. 考察了所得催化剂对4-叔丁基环己酮与乙二醇缩合反应的催化性能. 实验结果表明, 与未经过掺杂改性的SO₄^2-/SnO₂固体酸催化剂相比, 改性后催化剂的催化性能得到了改善. 研究了以Fe/Sn 摩尔比为0.5的SO₄^2-/SnO₂-Fe₂O₃固体酸为催化剂, 部分醛酮类化合物与乙二醇及1,2-丙二醇的缩合反应. 考察了反应时间、催化剂用量等因素对反应的影响. 同时, 将所得催化剂应用于环酮Baeyer-Villiger 氧化反应中, 催化剂表现出良好的催化活性, 且催化剂具有一定的循环使用性.