利用荧光浓度指示剂fura-2研究稀土离子的跨膜行为

本文提出了利用fura-2测量细胞内游离稀土离子浓度的定量方法。实验结果表明, 在模拟细胞内离子组成的条件下, 稀土离子La^3^+和Y^3^+与fura-2形成1:1的配合物。其配合物的表观离解常数分别为161nmol.dm^-^3和404nmol.dm^-^3,pH7.05, 有未配对f电子的Nd^3^+, Ho^3^+, Sm^3^+, Dy^3^+,Ce^3^+, Yb^3^+等稀土离子对荧光起萃灭作用。此性质使我们能够定性鉴定它们是否进入了细胞。我们使用如上性质, 利用单细胞阳离子测试系统, 以小鼠骨髓瘤细胞为模式细胞, 研究了上游离稀土离子的跨膜行为及部分体内小分子对稀土离子跨膜行为的影响。实验结果支持游离稀土离子不能通过细胞膜的假设, 而且所研究的体内小分子在生理浓度下对稀土离子的跨膜也无明显作用。     

KMgF3:Ce3+,Tb3+纳米粒子中Ce3+→Tb3+的发光及能量传递

利用微乳液方法,合成了铈、铽共掺杂的氟镁钾纳米粒子,研究了体系中Ce3+→Tb3+的发光特性以及它们之间的相互作用,结果表明KMgF3:Ce3+Tb3+纳米粒子中存在Ce3+→Tb3+的能量传递过程,即Ce3+可以将吸收的能量直接传递给Tb3+离子,使得Tb3+的绿色发光强度大为增加.     

在硅磷酸镧中Ce^3＋离子对Tb^3＋离子的敏化

实验表明在La2O3·0.01SiO2·0.95P2O5基质中Ce^3 对Tb^3 有强的敏化作用。254nm紫外光激发下温度对Tb^3 激活的Ce^3 、Tb^3 共激活试样的发射强度的Ce^3 、Tb^3 共激活的试样Tb^3 的^5D4→^7F6:5:4跃迁的发射强度随湿度的变化。计算了Ce^3 到Tb^3 的能量传递效率。初步探讨了Ce对Tb的能量传递机理。     

Bond additivity corrections for G3B3 and G3MP2B3 quantum chemistry methods

We have developed bond additivity correction (BAC) procedures for the G3-based quantum chemistry methods, G3B3 and G3MP2B3. We denote these procedures as BAC-G3B3 and BAC-G3MP2B3. We apply the procedures to compounds containing atoms from the first three rows of the periodic table including H, B, C, N, O, F, Al, Si, P, S, and Cl atoms. The BAC procedure applies atomic, molecular, and pairwise bond corrections to theoretical heats of formation of molecules. The BAC-G3B3 and BAC-G3MP2B3 procedures require parameters for each atom type but not for each bond type. These parameters have been obtained by minimizing the error between the BAC-G3B3 and BAC-G3MP2B3 predictions and the experimental heats of formation for a 155 molecule reference set, containing open and closed shell molecules representing various functional groups, multireference configurations, isomers, and degrees of saturation. As compared to former BAC-MP4, BAC-G2, and BAC-hybrid methods, BAC-G3B3 provides better agreement with experiment for a wider range of chemical moieties, including highly oxidized species involving SOx s, NOx s, POx s, and halogens. The BAC-G3B3 and BAC-G3MP2B3 procedures are applied to an extended test suite involving 273 compounds. We assess the overall quality of BAC-G3B3 with experiments and other theoretical approaches. For the reference set, the average error for the BAC-G3B3 results is 0.44 kcal/mol as compared to 0.82 kcal/mol for the raw G3B3. For the extended test set, the average error for the BAC-G3B3 results is 0.91 kcal/mol as compared to 1.38 kcal/mol for the raw G3B3. As compared to the other BAC procedures, the improved predictive capability of BAC-G3B3 and BAC-G3MP2B3 procedures is, to a large extent, due to the improved quality of G3-based methods resulting in much smaller BAC correction terms.     

阳离子光固化活性单体氧杂环丁烷的合成及表征

以3-乙基-3-羟甲基氧杂环丁烷为原料，与甲基磺酰氯磺酰化，得到3-乙基-3-甲磺酰基甲基氧杂环丁烷；在碱性条件下，以PEG600作相转移催化剂，用3-乙基-3-甲磺酰基甲基氧杂环丁烷与乙二醇醚化得到2-[（3-乙基-3-氧杂环丁基）甲氧基]乙醇；然后与甲基丙烯酸甲酯进行酯交换得到目的产物2-[（3-乙基-3-氧杂环丁烷）甲氧基]甲基丙烯酸乙酯。3-乙基-3-羟甲基氧杂环丁烷与3-溴丙烯反应，生成3-乙基-3-[（2-丙烯-1-基氧基）甲基]氧杂环丁烷，然后在氯铂酸的催化下，与三乙氧基硅烷反应得到3-乙基-3-[[3-（三乙氧基硅）丙氧基]甲基]氧杂环丁烷。产物经红外光谱和核磁共振谱表征得到确证。     

CH4,CO2和O2制合成气反应中载体对Ni催化剂抗氧化性能的影响

在ＣＨ４、ＣＯ２ 催化氧化制合成气反应中, Ｎｉ／Ａｌ２Ｏ３ 催化剂在高温下生成ＮｉＡｌ２Ｏ４ 尖晶石,是导致催化剂失活的一个重要因素． 通过向载体（Ａｌ２Ｏ３）中添加各种氧化物, 使得催化剂的抗氧化性能得到改善． 并运用ＴＰＲ、ＸＲＤ对催化剂进行表征, 发现催化剂的抗氧化性顺序为： Ｎｉ／ＣａＯ－Ａｌ２Ｏ３ ＞ Ｎｉ／ＭｇＯ－Ａｌ２Ｏ３ ＞ Ｎｉ／ＣｅＯ２－Ａｌ２Ｏ３ ＞ Ｎｉ／Ｌａ２Ｏ３－Ａｌ２Ｏ３ ＞ Ｎｉ／Ｙ２Ｏ３－Ａｌ２Ｏ３ ＞ Ｎｉ／ＴｉＯ２－Ａｌ２Ｏ３＞ Ｎｉ／Ａｌ２Ｏ３＞ Ｎｉ／Ｆｅ２Ｏ３－Ａｌ２Ｏ３．     

Thermal Study of the Cr-Mo-O System in Air

The phase diagram of the ternary system Cr-Mo-O in air was established from the results of thermal analysis of mixtures with different initial CrO3 to MoO3 ratios. It was found that MoO3 did not take any chromium oxide into solid solution. The presence of Cr2O3 destabilized MoO3 causing it to decompose to MoO2 in the temperature range 723-958 K depending on the initial Cr/Mo ratio. The decomposition of pure MoO3 MoO2 did not occur in air at any temperature. However, this decomposition took place through the formation of the compound Cr2O3·3MoO3(ss) and its decomposition to Cr2O3·3MoO2(ss). The latter compound has never been reported before and the X-ray data for this compound are given. The previously reported catalytic activity of Cr2O3·3MoO3(ss), at high temperatures, is presumably due to its reduction to Cr2O3·3MoO2(ss). This revised version was published online in July 2006 with corrections to the Cover Date.     

磷灰石结构荧光粉Ba10(PO4)6F2:Ce3+,Tb3+的合成、发光和能量传递

采用高温固相法合成了系列Ce~(3+)和Ce~(3+)/Tb~(3+)激活的具有磷灰石结构荧光粉Ba_(10)(PO_4)_6F_2。用X射线衍射(XRD)、扫描电镜(SEM)、激发和发射(PLE和PL)光谱对样品进行了表征分析。研究结果表明:所合成的荧光粉Ba_(10)(PO_4)_6F_2∶Ce~(3+),Tb~(3+)具有氟磷灰石结构,样品微观呈现不规则形貌。荧光粉Ba10-x(PO4)6F2∶x Ce~(3+)的相对发射强度随着x增加而增强,当x=0.09时,荧光强度达到最大。荧光粉Ba_(10)(PO_4)_6F_2∶Ce~(3+),Tb~(3+)的激发光谱为240～330 nm的宽带,发射光谱呈现出Ce~(3+)的5d→4f跃迁紫外光(335和358 nm)发射和Tb~(3+)的4f→4f跃迁绿光(542 nm)发射。光谱特性表明,发光过程中存在Ce~(3+)→Tb~(3+)能量传递,能量传递效率可以达到60%。计算Ce~(3+)和Tb~(3+)的临界距离为0.79 nm,能量传递机理是偶极-偶极交互作用。此外,详细论述了Ce~(3+)和Tb~(3+)之间的能量传递和发光的过程。通过调节Tb~(3+)的掺杂浓度,对荧光粉发光色坐标与Tb~(3+)的掺杂浓度之间的关系也进行了研究,随着Tb~(3+)的掺杂量从0增加0.52,荧光粉Ba_(10)(PO_4)_6F_2∶Ce~(3+),Tb~(3+)的发射光谱色坐标可以从(0.149 4,0.045 1)蓝色区变化到(0.280 1,0.585 3)绿色区。     

含有2,4-二卤代联苯基的新型唑类衍生物的合成及其抗真菌活性

以2,4-二卤代联苯为原料,经傅-克酰基化、还原、取代等反应步骤,合成了含有2,4-二卤代联苯基的新型唑类目标化合物3a~3k,其结构用红外光谱(IR)、高分辨质谱(HMRS)、核磁共振氢谱(¹H NMR)、核磁共振碳谱(¹³C NMR)等技术手段进行了表征。 测试了目标化合物的体外抗真菌活性,结果表明,所有目标化合物对所测试的致病真菌均有一定程度的抗真菌活性。 其中化合物3a~3k对红色发癣菌和石膏样毛癣菌的抗真菌活性和两性霉素B相当,化合物3b、3c、3e、3f、3h、3i、3k对白色念珠菌的抗真菌活性优于或等于酮康唑。     

Gold as hydrogen: structural and electronic properties and chemical bonding in Si3Au3(+0-) and comparisons to Si3H3(+0-)

A single Au atom has been shown to behave like H in its bonding to Si in several mono- and disilicon gold clusters. In the current work, we investigate the AuH analogy in trisilicon gold clusters, Si3Au3(+0-). Photoelectron spectroscopy and density functional calculations are combined to examine the geometric and electronic structure of Si3Au3-. We find that there are three isomers competing for the ground state of Si3Au3- as is the case for Si3H3-. Extensive structural searches show that the potential energy surfaces of the trisilicon gold clusters (Si3Au3-, Si3Au3, and Si3Au3+) are similar to those of the corresponding silicon hydrides. The lowest energy isomers for Si3Au3- and Si3Au3 are structurally similar to a Si3Au four-membered ring serving as a common structural motif. For Si3Au3+, the 2pi aromatic cyclotrisilenylium auride ion, analogous to the aromatic cyclotrisilenylium ion (Si3H3+), is the most stable species. Comparison of the structures and chemical bonding between Si3Au3(+0-) and the corresponding silicon hydrides further extends the isolobal analogy between Au and H.     

REBO3中Ce3+和Bi3+对Sm3+光致发光的影响

在紫外光(UV)激发下,系统地研究了REBO_3(RE=La,Gd,Y)中Sm~(3+),Ce~(3+)和Bi~(3+)的发射光谱、激发光谱及其发光强度与组成、结构的关系.结果表明:Ce~(3+)、Bi~(3+)均可敏化LaBO_3中Sm~(3+)的发光;而在GdBO_3和YBO_3中,只有Bi~(3+)能敏化Sm~(3+)的发光,Ce~(3+)猝灭Sm~(3+)的发光.本文还探讨了三种基质中Sm~(3+)发光浓度猝灭的机理.     

Mechanical properties of comonomer-compositionally fractionated poly[(3-hydroxybutyrate)-co-(3-mercaptopropionate)] with low 3-mercaptopropionate unit content

The mechanical properties, such as Young's modulus, yield strength, and the elongation at breakage, were investigated for several sulfur-containing biopolymers P(3HB-co-3MP). A series of P(3HB-co-3MP) samples with 3MP unit content ranging from 6.6 to 39.1 mol-% was biosynthesized by fermentation using the PHA-synthesizing bacteria Cupriavidus necator. For comparison, the bacterially synthesized P(3HB) and P(3HB-co-3HP) with the 3HP unit content ranging from 13.1 to 21.1 mol-% were also investigated. It was found that the sulfur-containing P(3HB-co-3MP) is much more durable to stretching. Notably, P(3HB-co-3MP) with the 3MP unit content of only 6.6 mol-% was found to show excellent mechanical properties.     

Synthesis and structural characterization of (μ-H)2RU3(CO)9(μ3-η-C8H12) and (μ-H)RU3(CO)9(μ3-η-C12H19)

The reaction between Ru₃(CO)₁₂ and a cyclic olefin (cis-cyclooctene or trans-cyclododecene) at 100 °C for several hours gives the title compounds (μ-H)₂RU₃(CO)₉(μ₃-η²-C₈H₁₂) (1), and (μ-H)RU₃(CO)₉(μ₃-η³-C₁₂H₁₉) (2), both of which have been characterized by X-ray diffraction studies, IR and NMR spectral measurements and elemental analysis. The prolonged reaction between Ru₃(CO)₁₂ and cis-cyclooctene gives compound HRu₃(CO)₉(C₈H₁₁) (3). Compound 3 has been characterized with IR and NMR spectral analyses. In 1 the cyclooctene ring is linked via a μ₃-η²-alkyne type of bonding to the face of the Ru₃ cluster. It is formally σ-bonded to two of the three Ru atoms and π-bonded to the third Ru. The two hydrides in 1 are bridging Ru---Ru bonds. In 2 the cyclododecene ring is bonded to the Ru₃ face via the μ₃-η³-CCHC linkage. There are two formal σ-bonds from the allyl part to the hydrido-bridged Ru atoms and the η³-allyl linkage to the third Ru atom.     

Luminescence of RE~(3+) and energy transfer from Gd~(3+) to RE~(3+) (RE = Dy, Eu) in SrGdAlO_4:RE~(3+)

Spectral properties of Gd3+, Dy3+ and Eu3+ ions in SrGdAlO4 are reported in detail. A cooperative vibronic transition of Gd3+ and the emission from the higher 5DJ (J=1, 2, 3) levels of Eu3+ were observed. Energy transfer occurs from Gd3+ to Dy3+ and to Eu3+. The influence of Gd3+ and Dy3+ concentrations on the luminescence intensity is discussed.     

铋基钙钛矿(CH3NH3)3Bi2I9薄膜的制备及在光伏电池中的应用

铋基钙钛矿由于稳定性强及毒性低,被认为是未来极具发展潜力的环保型钙钛矿材料。(CH₃NH₃)₃Bi₂I₉(MBI)因具有优异的光吸收性能而引起人们的普遍关注。本文介绍了MBI钙钛矿晶体的结构及性能,总结了其薄膜的制备方法,并重点叙述了不同方法制备的MBI钙钛矿薄膜在光伏电池中的应用情况。MBI钙钛矿与铅基钙钛矿的效率相比还有很大差距,如何提高其光电转换效率仍是今后研究的主要方向。     

Eu3+/Tb3+和Eu3+/Pr3+共掺杂P(MMA-co-St)的荧光性能的研究

将不同荧光性能的铽(Tb)、镨(Pr)离子分别与铕(Eu)离子混合，以三异丙氧基稀土的形式掺杂P(MMA-CO-St)共聚物，研究Eu^3 ／Tb^3 和Eu^3 ／pr^3 共掺杂P(MMA-CO-St)的荧光性能的变化情况．结果表明，Eu^3 ／Tb^3 掺杂的P(MMA-CO-St)中，Tb^3 作为能量给予体，Eu^3 作为能量接受体，能量转移的结果使Eu^3 特征荧光显增强；Eu^3 ／pr^3 掺杂的P(MMA-CO-St)中，Eu^3 的能量向pr^3 转移，致使Eu^3 的特征荧光猝灭，pr^3 的荧光略为增强．     

NF3 decomposition over some metal oxides in the absence of water

NF3 decomposition in the absence of water over Al2O3, Fe2O3, Co3O4 and NiO, and transition metal oxides (Fe2O3, Co3O4 and NiO) coated Al2O3 reagents was investigated. The results show that Al2O3 is an active reagent for NF3 decomposition with 100% conversion lasting for 8.5 h at 400 ℃. Fe2O3, Co3O4 and NiO coated Al2O3 reagents are superior to bare Al2O3, and 5%Co3O4/Al2O3 has a high reactivity with NF3 full conversion maintaining for 10.5 h. It is suggested that the presence of transition metal oxide is beneficial to the reactivity of Al2O3, and results in a significant enhancement in the fluorination of Al2O3.     

Detailed characterization of (3 x 3) iodine adlayer on Pt(111) by unequal-sphere packing model

A simple unequal-sphere packing model is applied to study the iodine (3x3) adlayer on the Pt(111) surface. By using a newly introduced parameter, defined as the average adsorbate height, three characteristic adlattices, (3x3)-sym, (3x3)-asym, and (3x3)-lin, have been selected and characterized in great detail, including the exact adatom registry. The (3x3)-sym iodine adlattice, observed in many experimental studies, appears to be, on average, the closest one to the substrate surface. A special contour plot of average adsorbate height vs X and Y positions of the (3x3) iodine unit cell indicates the existence of two local minima, which are related to preferential formation of (3x3)-sym and (3x3)-asym iodine adlattices. Our model gives good agreement with experimental findings, and explains the mechanism of preferential appearance of (3x3)-sym and (3x3)-asym structures.     

光促进下环己烯与二氧化碳羰基化反应中副产物的气相色谱-质谱分析

应用气相色谱-质谱法（GC-MS）研究了光促进温和条件下环己烯与CO2羰基化反应中与丙酮有关的副产物,这有助于对反应进行深入的研究和优化。在光促进温和条件下环己烯与CO2进行羰基化反应的同时,环己烯也可以与反应体系中的CH3COCH3发生光化学反应,生成副产物。分别用CH3COCH3和CD3COCD3进行实验,对反应产物进行GC-MS分析,通过对不同反应情况下的MS图中同位素效应的比较,可以分析出副产物中是否有来自CH3COCH3中的—CH3。研究表明丙酮与底物环己烯之间生成了环氧丁烷衍生物、cyclo-C6H9-C(CH3)2OH和cyclo-C6H11-C(CH3)2OH等3种副产物。