Palladium-catalyzed, copper(I)-mediated coupling of boronic acids and benzylthiocyanate. A cyanide-free cyanation of boronic acids

A new method for the synthesis of nitriles is described. As a complement to the classic cyanation of aryl halides using cyanide sources and a transition metal catalyst, the palladium-catalyzed cross-coupling of thiocyanates with boronic acids in the presence of copper(I) thiophene-2-carboxylate (CuTC) affords nitriles in good to excellent yields.     

Rhodium‐Catalyzed Transnitrilation of Aryl Boronic Acids with Dimethylmalononitrile

An efficient transnitrilation of aryl boronic acids with dimethylmalononitrile (DMMN) is described. This rhodium‐catalyzed electrophilic cyanation presents a novel approach to prepare aryl nitriles by using a carbon‐bound cyanating reagent which undergoes cross‐coupling with the aryl boronic acid. The reaction expands the degree of functional‐group compatibility exhibited by the transnitrilation of aryl Grignard and aryllithium reagents. A variety of aryl boronic acid derivatives and dialkylmalononitriles were amenable to the transnitrilation.     

Scyllo-inositol as a convenient protecting group for aryl boronic acids in Suzuki–Miyaura cross-coupling reactions

Herein, we report air- and water-stable borate complexes between scyllo-inositol and aryl boronic acids. The complexes were less reactive than free aryl boronic acids under Suzuki–Miyaura cross-coupling reaction conditions; thus, the borate complexes were used as protected boronic acids. Although protecting groups for organoboronic acids are useful in coupling reactions, especially those used to produce π-conjugated molecules, only a few reports describing the use of protecting groups for boronic acids have been published. The proposed unique structural borate complex provides a novel protective method for aryl boronic acids.     

Copper-mediated cyanation reactions

Aryl nitriles can be efficiently synthesized through transition-metal-mediated cyanation of aryl halides, arenes, aryl boronic acids, and so on. Among those most commonly used transition-metals, copper catalysts are surely much more inexpensive and easier to handle, compared to any other metal catalysts. Considering the high-efficiency of copper catalysts in the activation of C–X, C–H, and C–B bond as well as in the formation of C–CN bond, this Letter summarizes various copper-mediated cyanations based on the different kinds of cyanide reagents, such as metal cyanides, potassium hexacyanoferrate(II), acetone cyanohydrins, DDQ, AIBN, benzyl cyanide, malononitrile, nitromethane, and DMF. Our group’s recent contributions to this area are also demonstrated.     

Ipso-amidation of arylboronic acids: Xenon difluoride-nitriles as efficient reagent systems

The xenon difluoride-mediated, ipso-amidation of boronic acids has been achieved for the first time under mild conditions. This method provides a simple, one-pot procedure for the direct synthesis of a series of anilides from the corresponding arylboronic acids and alkyl/aryl nitriles. Arylboronic acids bearing electron donating groups gave anilides in high yields, while moderate yields were observed for those bearing electron withdrawing groups. A plausible mechanism involving the formation of an aryl radical cation through single electron transfer by xenon difluoride, followed by the nucleophilic addition of the nitrile, is proposed.     

Highly effective activation of aryl chlorides for Suzuki coupling in aqueous media using a ferrocene-based Pd(II)–diimine catalyst

The Suzuki coupling of aryl chlorides with boronic acids using a ferrocene-containing Pd(II)–diimine complex as catalyst, in aqueous media, under microwave heating is reported. A small amount of the catalyst (0.1%) was found to be highly effective for coupling unactivated aryl chlorides with boronic acids to form sterically hindered ortho-substituted biaryls. The same catalyst also enabled the coupling of aryl bromides and iodides with various boronic acids in very high yields. The catalyst is air stable and the catalytic reaction can be completed in 15 min.     

General and highly efficient fluorinated-N-heterocyclic carbene–based catalysts for the palladium-catalyzed Suzuki–Miyaura reaction

A general and highly efficient trifluoromethylated-N-heterocyclic carbene (NHC)-based catalyst for the palladium-catalyzed Suzuki–Miyaura reaction was reported. In the presence of the catalyst, reactions of non-activated aryl chlorides and triflates with aryl boronic acids occurred at room temperature with good to excellent yields (63–98%). In addition, catalysts generated from a combination of Pd(OAc)₂/imidazolium salt 6a is not only effective for the coupling of heteroaryl boronic acid with aryl halides and heteroaryl halides, but also efficient for coupling of other heteroaryl halides and heteroaryl boronic acids. Finally, the catalyst is highly effective for Suzuki–Miyaura reaction of aryl bromides and chlorides with 0.01–0.1 mol % loading if the temperature was raised at refluxed THF/H₂O.     

General and efficient methodology for the Suzuki-Miyaura reaction in technical grade 2-propanol

The reaction profile of a series of palladium-based catalysts was examined in the Suzuki-Miyaura reaction using technical grade 2-propanol as solvent and potassium t-butoxide as base. The results generally show high activity. The method allows for the coupling of electron-rich aryl chlorides with sterically hindered aryl boronic acids to produce tri-ortho-substituted biaryls in high yields using very mild conditions and short reaction times.     

Rhodium-Catalyzed Addition of Aryl Boronic Acids to 2,2-Disubstituted Malononitriles

β-Ketonitriles bearing a quaternary carbon at the 2-position were prepared through Rh-catalyzed addition of aryl boronic acids to 2,2-disubstituted malononitriles. In contrast to the previously described transnitrilative cyanation of aryl boronic acids with dialkylmalononitriles, the present reaction avoids retro-Thorpe collapse of the intermediate addition product through the use of a milder base. The reaction was amenable to a variety of aryl boronic acids and disubstituted malononitriles, providing a diverse array of β-ketonitriles. The products could be further derivatized to valuable chiral α,α-disubstituted-β-aminonitriles through addition reactions to the corresponding N-tert-butanesulfinyl imines.     

Lithium aminoborohydrides 17. Palladium catalyzed borylation of aryl iodides, bromides, and triflates with diisopropylaminoborane prepared from lithium diisopropylaminoborohydride

The Alcaraz-Vaultier borylation of aryl halides and triflates is reported utilizing diisopropylaminoborane (BH₂N(ⁱPr)₂) prepared from the corresponding lithium aminoborohydride (LAB reagent). BH₂N(ⁱPr)₂, prepared by reacting lithium diisopropylaminoborohydride with trimethylsilyl chloride, provided the most consistent isolated yields from this reaction. Catalytic amounts of palladium dichloride produced the highest yields from aryl iodides, while catalytic tris(dibenzylideneacetone)dipalladium(chloroform) provided the best yields for aryl bromides and triflates. This route to boronic acids is mild enough to tolerate various functionalities and for the first time employs aryl triflates as substrates for the Alcaraz-Vaultier borylation. In addition, it was found that both boronic acid and ester compounds could be isolated from the reaction mixture utilizing simple work-up procedures. Treatment of the reaction intermediate with an acid/base work-up provided the corresponding boronic acid, while treating the same intermediate with a diol, such as neopentyl glycol, afforded the corresponding boronic ester.     

A direct copper-catalyzed route to pyrrolo-fused heterocycles from boronic acids

A convenient route to prepare azaindoles and related pyrrolo-fused heterocycles from boronic acids, DBAD (di-tert-butyl-diazodicarboxylate) and enolizable aldehydes and ketones is presented. The reaction proceeds via a one-pot four-step cascade sequence with key steps involving a copper-catalyzed boronic acid coupling to DBAD and a Fischer indolization providing access to a variety of pharmaceutically interesting heterocycles including pyrrolo-pyridines, -pyrimidines, -quinolines, and -isoquinolines from readily available aza–aryl boronic acid precursors.     

Decarboxylative Conjunctive Cross-coupling of Vinyl Boronic Esters using Metallaphotoredox Catalysis

The synthesis of complex alkyl boronic esters through conjunctive cross-coupling of vinyl boronic esters with carboxylic acids and aryl iodides is described. The reaction proceeds under mild metallaphotoredox conditions and involves an unprecedented decarboxylative radical addition/cross-coupling cascade of vinyl boronic esters. Excellent functional-group tolerance is displayed, and application of a range of carboxylic acids, including secondary α-amino acids, and aryl iodides provides efficient access to highly functionalized alkyl boronic esters. The decarboxylative conjunctive cross-coupling was also applied to the synthesis of sedum alkaloids.     

Rhodium‐Catalyzed Addition of Aryl Boronic Acids to 2,2‐Disubstituted Malononitriles

β‐Ketonitriles bearing a quaternary carbon at the 2‐position were prepared through Rh‐catalyzed addition of aryl boronic acids to 2,2‐disubstituted malononitriles. In contrast to the previously described transnitrilative cyanation of aryl boronic acids with dialkylmalononitriles, the present reaction avoids retro‐Thorpe collapse of the intermediate addition product through the use of a milder base. The reaction was amenable to a variety of aryl boronic acids and disubstituted malononitriles, providing a diverse array of β‐ketonitriles. The products could be further derivatized to valuable chiral α,α‐disubstituted‐β‐aminonitriles through addition reactions to the corresponding N ‐tert ‐butanesulfinyl imines.     

Study on the Regioselectivity of Rhodium-Catalyzed Ring Opening Reactions of C1-Substituted 7-Oxabenzonorbornadienes with Boronic Acids

An optimized condition for the rhodium-catalyzed ring-opening reaction of C₁-substituted oxabicyclic alkenes with aryl boronic acids was developed and the effect of aryl boronic acid as well as the effect of C₁ substitution on the oxabicyclic alkenes was studied. Aryl boronic acids carrying electron-donating substituents provided the ring-opened products in excellent yields regardless of the position, while electron-withdrawing substituents were more susceptible to steric interactions. Although two different regioisomers are possible, all the rhodium-catalyzed ring-opening reactions of C₁ substituted oxabicyclic alkenes studied with aryl boronic acids were found to be highly regioselective, giving single regioisomers in all cases.     

Copper-mediated cross-coupling of aryl boronic acids and alkyl thiols

[reaction: see text] The cross-coupling of aryl boronic acids and alkanethiols mediated by copper(II) acetate and pyridine in anhydrous dimethylformamide affords aryl alkyl sulfides in good yield with a wide variety of substituted aryl boronic acids. The method is applicable to the synthesis of aryl sulfides of cysteine.     

Decarboxylative Conjunctive Cross‐coupling of Vinyl Boronic Esters using Metallaphotoredox Catalysis

The synthesis of complex alkyl boronic esters through conjunctive cross‐coupling of vinyl boronic esters with carboxylic acids and aryl iodides is described. The reaction proceeds under mild metallaphotoredox conditions and involves an unprecedented decarboxylative radical addition/cross‐coupling cascade of vinyl boronic esters. Excellent functional‐group tolerance is displayed, and application of a range of carboxylic acids, including secondary α‐amino acids, and aryl iodides provides efficient access to highly functionalized alkyl boronic esters. The decarboxylative conjunctive cross‐coupling was also applied to the synthesis of sedum alkaloids.     

Efficient imidazolium salts for palladium-catalyzed Mizoroki-Heck and Suzuki-Miyaura cross-coupling reactions

The system, Pd(OAc)2/imidazolium salts (L2), was found as an efficient catalyst in the Heck coupling reaction of olefins with aryl halides and Suzuki reactions of various aryl halides with aryl boronic acids under aerobic condition. This catalytic system demonstrates great tolerance to a wide range of groups on all substrates of aryl halides, alkenes and aryl boronic acids.     

Efficient synthesis of isoflavone analogues via a Suzuki coupling reaction

Analogues of 3-aryl-8-isobutyl-5,6,7-trihydroxy-2-methyl-4H-chromen-4-one were synthesized with high yields via the Suzuki coupling reaction of 3-iodo-8-isobutyl-5,6,7-trimethoxy-2-methyl-4H-chromen-4-one with different aryl boronic acids.     

Visible‐Light‐Mediated Chan–Lam Coupling Reactions of Aryl Boronic Acids and Aniline Derivatives

The copper(II)‐catalyzed aerobic oxidative coupling reaction between aryl boronic acids and aniline derivatives was found to be improved significantly under visible‐light‐mediated photoredox catalysis. The substrate scope of this oxidative Chan–Lam reaction was thus expanded to include electron‐deficient aryl boronic acids as viable starting materials.     

trans-Pd(OAc)2(Cy2NH)2 catalyzed Suzuki coupling reactions and its temperature-dependent activities toward aryl bromides

A new catalytic system based on Pd-simple amines for Suzuki coupling reactions of aryl bromides is described. A well-defined air-stable complex, trans-Pd(OAc)₂(Cy₂NH)₂ effectively promotes Suzuki couplings of aryl bromides with a range of aryl boronic acids to give diaryl products in high yields. It also exhibits temperature-dependent activity toward aryl bromides bearing different electronic substituents under reaction conditions.