Mechanochemical synthesis of primary amides from carboxylic acids using TCT/NH4SCN

A facile and effective approach toward the synthesis of primary amides from carboxylic acids has been developed. In the presence of 2,4,6-trichloro-1,3,5-triazine, a combination of ammonium thiocyanate and potassium carbonate led to the rapid conversion of carboxylic acids into the corresponding amides within five minutes grinding at room temperature. The use of ammonium thiocyanate as the amine source is unprecedented and exclusive formation of primary amides is observed only under the liquid-assisted grinding conditions.     

A novel approach for the synthesis of aryl amides

A novel and highly efficient approach for the synthesis of aryl amides in high yields by the reaction of carboxylic acids and isocyanides in methanol at ambient temperature is reported.     

One-step conversion to tertiary amines: InBr3/Et3SiH-mediated reductive deoxygenation of tertiary amides

We have developed a simple and practical procedure for a direct reductive conversion from a variety of tertiary amides to the corresponding tertiary amines using an InBr₃/Et₃SiH reducing system. This reducing system can be applied to the reduction of a secondary amide and provides a more efficient alternative to conventional methods that use aluminum and boron hydrides.     

Microwave acceleration in DABAL-Me3-mediated amide formation

Facile direct coupling of esters and secondary amines to afford tertiary amides proceeds under microwave irradiation using the air-stable trimethylaluminium source DABAL-Me₃ [(DABCO)(AlMe₃)₂]. Excellent yields (88-98%) are attained for cyclic secondary amines in reactions that are complete in 5-16 min. The process can be extended to the formation of Weinreb amides (upto 76% from commercial MeNHOMe·HCl) in a one-pot procedure using NaH to liberate the free methoxyamine.     

K2Li(NH2)3 and K2Na(NH2)3—synthesis and crystal structure of two crystal-chemically isotypic mixed-cationic amides

K₂Li(NH₂)₃ (1) was the only crystalline product obtained from the reaction of potassium with dilithium decahydro-closo-decaborate Li₂B₁₀H₁₀ in liquid ammonia at −38 °C. The compound crystallizes in the space group P4₂/m with Z=4, a=6.8720(5) Å, c=11.706(1) Å and V=552.81(7) Å³. The investigated crystal-chemically isotypic sodium compound K₂Na(NH₂)₃ (2) was merohedrally twinned and crystallized from a reaction mixture containing potassium and disodium decahydro-closo-decaborate Na₂B₁₀H₁₀ in liquid ammonia with a=7.0044(5) Å, c=12.362(1) Å and V=606.48(9) Å³. The compounds contain pairs of edge sharing tetraamidolithium or tetraamidosodium tetrahedra which are interconnected by potassium ions forming three-dimensional infinite networks.     

Cyclodimerization and cyclotrimerization of isocyanates promoted by one praseodymium benzenethiolate complex [Pr(SPh)3(THF)3]

The cyclotrimerization of aryl isocyanates and the cyclodimerization of alkyl isocyanates initiated by one praseodymium benzenethiolate complex [Pr(SPh)₃(THF)₃] were investigated. Comparative runs with [Pr(SPh)₃(THF)₃] and its precursor Pr[(Me₃Si)₂N]₃ showed that the former has the advantages of a higher selectivity toward isocyanates, easy preparation, low catalyst loading, high conversion as well as mild reaction conditions.     

Synthesis of 2-arylpropionic acids by electrocarboxylation of benzylchlorides catalysed by PdCl2(PPh3)2

Electrochemical carboxylation of benzylchlorides catalysed by Pd(II) complex afforded 2-arylpropionic acids in good yields under atmospheric pressure of carbon dioxide at constant current of 10 mA cm⁻². Mechanistic and electrochemical studies revealed the cooperative role of reduced palladium species in the activation of carbon dioxide.     

Reactivity of chlorinating agents/PPh3 for the chlorination of alcohols and carboxylic acids: a comparative study

The reactivity of chlorinating agents was examined with the aid of ¹H NMR using competitive reactions between selected chlorinating agents and CBr₄ towards alcohols and carboxylic acids. The reactivity was greatly dependent on the type of substituent on the chlorinating agents. COCCl₃ and CN substituted trichloromethyl groups enhanced the reactivity of the chlorinating agent with PPh₃ for the chlorination of alcohols and carboxylic acids.     

Dansylation of aromatic, aliphatic, and medicinal carboxylic acid compounds in 1 M Na2CO3 buffer

Dansyl chloride (DNS-Cl) is a sulfonyl chloride compound which is utilized as a fluorescent probe for quantitative analysis or structural studies of complex molecules. The fluorescent emission was sufficiently strong to permit detection of less than 10 μg of the carboxyl compounds studied here. The dansylation of aromatic carboxyl compounds (i.e. aspirin), aromatic primary amines, and aliphatic carboxyl compounds was accomplished in 1 M Na₂CO₃ buffer at pH 11. The fluorescent labeled analytes were then isolated by thin layer chromatography (TLC) or the aqueous mixture was pre-extracted with proline (or glycine) to eliminate back-ground emission originating from the hydrolized or sulfonic acid form of DNS-Cl. Fluorescent labeled analytes are clearly discerned under ultraviolet light. Limits of detection for dansylated carboxyl compounds was 1-5 μg, however for amines it was approximately 1 μg. Dansylation of aromatic primary amines proceeded much faster (15 min) than that of carboxyl compounds (≥1.5 h) at 25 °C. Despite the aqueous solubility of analytes, which ranged from less than 0.004-5.30 mg/ml, the dansylation of carboxyl compounds was effective. Various organic solvents for extracting derivatives from aqueous mixture were evaluated.     

Selective mono- and di-N-alkylation of aromatic amines with alcohols and acylation of aromatic amines using Ph3P/DDQ

Selective N-monoalkylation of aromatic amines with 1° and 2° alcohols and conversion of aromatic amines to amides are performed immediately and in excellent yields using triphenylphosphine (PPh₃) and 2,3-dichloro-5,6-dicyanobenzoquinone (DDQ) in dichloromethane at room temperature. Symmetrical and unsymmetrical N,N-dialkylation of aromatic amines are also carried out in modest yield at room temperature by this reagent system.     

Facile and efficient generation of quinolone amides from esters using aluminum chloride

Quinolone esters are readily converted into the corresponding amides using aluminum chloride at room temperature in excellent yields and purities. The method is both general and scalable to multi-kilogram quantities.     

A facile,one-pot procedure for the formation of benzimidazoles from esters using DABAL-Me3, an air stable source of AlMe3

A convenient, single-step, efficient synthesis of benzimidazoles from esters and diamines is reported. The methodology uses an air stable form of trimethylaluminum referred to as DABAL-Me₃ and is compatible with a wide range of functional groups, including acid-sensitive protecting groups.     

POCl3 promoted metal-free synthesis of tertiary amides by coupling of carboxylic acids and N,N-disubstituted formamides

Herein we report a robust and synthetically useful catalyst-free amination methodology by the coupling of carboxylic acids and N-substituted formamides using POCl₃ as a promoter. Versatile amides with a wide array of substituent groups were prepared within only 1?h in good to excellent yields. And even multi-substituted aromatic carboxylic acids could give the desired products with satisfactory results.     

Effects of coupling agents on mechanical and morphological behavior of the PP/HDPE blend with two different CaCO3

The main purpose of incorporating fillers, such as calcium carbonate, into blends of polyolefins is to decrease costs and change tensile and impact properties. Structural differences between both components give rise to the formation of large filler agglomerates in the polymer matrix, which influence the mechanical response of the material. Therefore, the coupling agents of the Lica 12 type at various concentrations was used to facilitate the link between filler and matrix (the latter consisting of PP/HDPE 80/20 wt). Filler was added to the PP/HDPE blend at a 30 wt.% concentration. Two types of calcium carbonate (CaCO₃) were used. These have different average sizes (3.0 and 1.8 μm) which were determined by means of laser diffraction techniques. In addition other coupling agents of the titanate type, such as Lica 09, Lica 01, zirconates ZN 12, and a 1:1 mixture of Lica 12 and Lica 01, were used. This study clearly demonstrated that the addition of the coupling agent to CaCO₃ modifies the mechanical properties of the PP/HDPE/CaCO₃ composites. Values of the mechanical properties indicate that due to its characteristics, each coupling agent gives rise to increases in a particular mechanical property. In the case of Lica 01 an increase was verified in Young’s modulus at 0.7 wt.% and in elongation at break at both concentrations (0.3 and 0.7 wt.%), whereas ZN 12 brought about an increase in elongation at break. The 1:1 mixture of Lica 12 and Lica 01 caused impact resistance of the blend of PP/HDPE with CaCO₃ to increase considerably.     

Thionation of amides using a solid-supported P2S5 reagent under microwave irradiation

In this Letter, we describe an improved method for the thionation of amides. Using a solid-supported P₂S₅ reagent, heating under microwave irradiation furnished thioamides in good to excellent yields, with a significantly reduced reaction time compared with that achieved under conventional heating. Furthermore, a change of solvent from that described in the literature enabled a simplified work-up and purification of the products.     

柠檬酸对Ni2P/TiO2-Al2O3催化剂加氢脱硫性能的影响

采用溶胶-凝胶法制备了TiO2-Al2O3复合载体,以柠檬酸(CA)为络合剂采用浸渍法制备了Ni2P负载的TiO2-Al2O3复合载体催化剂,并用X射线衍射(XRD)、N2吸附比表面积测定、H2程序升温氢还原(H2-TPR)、程序升温氧化(TPO)、X射线光电子能谱(XPS)技术对催化剂的结构和性质进行了表征,考察了CA/Ni摩尔比对在Ni2P/TiO2-Al2O3催化剂上进行的二苯并噻吩(DBT)加氢脱硫(HDS)性能的影响.结果表明:适量的CA可以丰富催化剂的孔道,提高催化剂的比表面积.当n(CA)/n(Ni)=2:1时,催化剂的比表面积达到126.75m2·g-1,与不加CA时相比,提高了57.05m2·g-1.调节n(CA)/n(Ni)能够改善活性相的分布,改变活性相的种类;引入CA使Ni和P前驱体的还原温度明显降低,促进活性相Ni2P的生成,一定程度上能够抑制催化剂表面炭的形成和沉积,提高其稳定性.n(CA)/n(Ni)=2:1时,催化剂具有最好的加氢脱硫活性,在360°C,3.0MPa,氢油比为500(V/V),液时体积空速为2.0h-1的条件下,二苯并噻吩转化率为99.5%,可将模拟油中硫含量由2%(w)降低到0.01%(w).     

Synthesis and X-ray crystallographic structures of [HGa(NMe2)2]2 and [PhGa(NHNMe2)2]2, and room-temperature conversions of [HGa(NMe2)2]2 to (HGaNH)n and (HGaNMe)n

The reactivity of bis(dimethylamido) complexes of phenyl- and hydridogallium with ammonia, dimethylamine and 1,1-dimethylhydrazine is described. Synthesis of the starting gallium hydride, [HGa(NMe₂)₂]₂, was achieved in nearly quantitative yield from the reaction of HGaCl₂(quinuclidine) with LiNMe₂. In neat ammonia or methylamine at room temperature both dimethylamido ligands in [HGa(NMe₂)₂]₂ were substituted by a single equivalent of NH₃ or MeNH₂ to produce amorphous (HGaNH)_n or (HGaNMe)_n, respectively. In contrast, the reaction of [PhGa(NMe₂)₂]₂ with neat Me₂NNH₂, at room temperature consumed two equivalents of the substituted hydrazine to form [PhGa(NHNMe₂)₂]₂ in a 73% yield. Single crystal X-ray crystallographic analyses of [HGa(NMe₂)₂]₂ and [PhGa(NHNMe₂)₂]₂ establish that in the solid state both compounds adopt a cyclic Ga-N-Ga-N structure with a crystallographic center of symmetry located at the center of the ring.     

One-pot,direct synthesis of acyl azides from carboxylic acids using Ph2PCl/I2/NaN3 reagent system

A mild,efficient and simple method for the preparation of acyl azides from carboxylic acids using chlorodiphenylphosphine in the presence of molecular iodine and sodium azide is described.     

Microwave-assisted synthesis of cyclopentyltrisilanol (c-C5H9)7Si7O9(OH)3

Microwave-assisted synthesis of cyclopentyltrisilanol by the hydrolytic condensation of the cyclopentyltrichlorosilane in aqueous acetone has been successfully performed. The reaction under microwave irradiation is considerably shorter in time in comparison to the traditional procedure and may be utilized for preparation of Si-containing building blocks for nanocomposite materials.     

g-C3N4/SnS2 Heterostructure: a Promising Water Splitting Photocatalyst

Graphite-like carbon nitride (g-C₃N₄) based heterostrutures has attracted intensive attention due to their prominent photocatalytic performance. Here, we explore the g-C₃N₄/SnS₂ coupling effect on the electronic structures and optical absorption of the proposed g-C₃N₄/SnS₂ heterostructure through performing extensive hybrid functional calculations. The obtained geometric structure, band structures, band edge positions and optical absorptions clearly reveal that the g-C₃N₄ monolayer weakly couples to SnS₂ sheet, and forms a typical van der Waals heterojunction. The g-C₃N₄/SnS₂ heterostructure can effectively harvest visible light, and its valence band maximum and conduction band minimum locate in energetically favorable positions for both water oxidation and reduction reactions. Remarkably, the charge transfer from the g-C₃N₄ monolayer to SnS₂ sheet leads to the built-in interface polarized electric field, which is desirable for the photogenerated carrier separation. The built-in interface polarized electric field as well as the nice band edge alignment implys that the g-C₃N₄/SnS₂ heterostructure is a promising g-C₃N₄ based water splitting photocatalyst with good performance.