A highly selective ratiometric fluorescent chemosensor for Zn2+ ion based on a polyimine macrocycle

A new ratiometric fluorescent chemosensor based on a polyimine macrocycle ligand 1 has been synthesized. The chemosensor can exhibit a pronounced fluorescence response and high selectivity to Zn²⁺ ion over other 15 metal ions, including Cd²⁺. Sensor 1 appears an emission peak at 370 nm. Upon the addition of Zn²⁺ ion, the typical emission peak for 1 at 370 nm is obviously quenched, but a new emission peak at around 470 nm appears and shows a large enhancement due to the formation of a 1:1 Zn²⁺-1 complex. In addition, there is a good linear relationship between the fluorescence ratio I_470nm/I_370nm and the concentration of Zn²⁺, which makes a ratiometric assay of Zn²⁺ ion possible.     

Thiazole sulfonamide based ratiometric fluorescent chemosensor with a large spectral shift for zinc sensing

A new thiazole sulfonamide (TTP, 1) based Zn²⁺ selective intrinsic chemosensor has been synthesized and investigated. The chemosensor shows a selective fluorescence enhancement (3.0 fold) with Zn²⁺ over biologically relevant cations (Ca²⁺, Mg²⁺, Na⁺, and K⁺) and biologically non-relevant cations (Cd²⁺) in an aqueous ethanol system. It produces an increase in the quantum yield and a longer emission wavelength shift (64 nm) on Zn²⁺ binding with the potential of a ratiometric assay.     

Ratiometric fluorescent Zn chemosensor constructed by appending a pair of carboxamidoquinoline on 1,2-diaminocyclohexane scaffold

By appending a pair of carboxamidoquinoline pendants onto 1,2-diaminocyclohexane scaffold via N-alkylation, multifunctionalized ACAQ was designed and synthesized as a water soluble fluorescent ratiometric chemosensor for Zn²⁺. In 50% aqueous methanol buffer pH 7.4 solution, upon excitation at 316 nm, ACAQ (5 μM) displayed a selective ratiometric fluorescence changes with a shift from 410 to 490 nm in response to the interaction with Zn²⁺. After binding with 1 equiv of Zn²⁺, ACAQ exhibited a 12-fold enhancement in I₄₉₀/I₄₁₀ characterized by a clear isoemissive point at 440 nm. The metal sensor binding mode was established by Job’s plot and the combined fluorescence and ¹H NMR spectroscopic method. The selectivity of the probe toward biological relevant cations and transition metal ions was proven to be good. In addition, the interference caused by Cu²⁺ and Cd²⁺ in the quantitation of Zn²⁺ can be completely eliminated by the use of diethyldithiocarbamate as the screening agent. Exploitation of ACAQ as the sensing probe, ratiometric determination of Zn²⁺ with the limit of detection (LOD) at 28.3 nm can be realized. In addition, the unique responsive properties of the probe toward Fe³⁺ and Zn²⁺ were used to construct a fluorescent switch. The membrane permeability of ACAQ to living cells and bio-imaging of Zn²⁺ were demonstrated.     

Zn selective luminescent ‘off-on’ probes derived from diaryl oxadiazole and aza-15-crown-5

New photo-induced electron transfer (PET) probes OMOX and OBOX, carrying an additional binding site in the form of ‘oxadiazole nitrogen’ have been designed to evaluate binding interactions with biologically significant Li⁺, Na⁺, K⁺, Ca²⁺, Mg²⁺, and Zn²⁺ including environmentally toxic Ba²⁺ and Cd²⁺ using optical spectral techniques. While Li⁺, Na⁺, and K⁺ did not appreciably perturb either the absorption or emission spectra, Ba²⁺, Ca²⁺, Mg²⁺, Zn²⁺, and Cd²⁺ induced slight red shifts (2-8 nm) in the UV-visible spectra as well as pronounced chelation induced enhanced fluorescence (CHEF). Both OMOX and OBOX exhibited the highest CHEF in contact with the zinc ion, whereas Ba²⁺, Ca²⁺, Mg²⁺, and Cd²⁺ induced relatively less emission enhancements. OBOX, which is a poorer emitter (Φ_f=0.0062) than OMOX (Φ_f=0.015), showed highly promising 160-fold emission enhancement in the presence of Zn²⁺. Potential, therefore is available in OBOX to function as a selective luminescent ‘off-on’ sensor for Zn²⁺ in the presence of coordinatively competing Ba²⁺, Ca²⁺, Mg²⁺, and Cd²⁺ ions.     

ZnO hollow nanospheres via Laux-like oxidation of Zn0 nanoparticles

Zinc oxide hollow nanospheres were obtained via a Laux-like oxidation of zinc nanoparticles using nitrobenzene as oxidizing agent. The ZnO hollow nanospheres exhibit an outer diameter of 10.4 ± 1.3 nm and a well crystallized sphere wall with a thickness of 2.9 ± 0.4 nm. Laux-like oxidation and formation of the ZnO hollow nanospheres were performed instantaneously after sodium naphthalenide ([NaNaph]) driven reduction of ZnCl₂ to Zn⁰ nanoparticles in the liquid phase without any separation of the intermediate Zn⁰ nanoparticles. The diameter of the resulting ZnO hollow nanospheres (10.4 ± 1.3 nm) reflects the diameter of the intermediate Zn⁰ nanoparticles (10.1 ± 2.3 nm). In accordance with the small diameter of the ZnO sphere wall, quantum-size effects occur with a band gap that is blue-shifted by 0.2 eV in comparison to bulk-ZnO.     

Thermal and photochemical effects on the structure,morphology, thermal and optical properties of PVA/Ni0.04Zn0.96O and PVA/Fe0.03Zn0.97O nanocomposite films

Ni_0.04Zn_0.96O and Fe_0.03Zn_0.97O with average diameter of 23 and 19 nm, respectively, have been synthesized by a modified sol–gel method to be used in the preparation of (100 − x)/x poly(vinyl alcohol)/oxide nanocomposite films, with x = 0, 1, 3 and 5 (in wt.%). A 125 W-Hg vapor lamp with emission above 254 nmwas used to irradiate PVA/Ni_0.04Zn_0.96O and PVA/Fe_0.03Zn_0.97O films. The effect on their structural, thermal, morphological and optical properties was studied by TG, DSC, DRX, AFM, UV–vis and PL spectrophotometry. The Ni_0.04Zn_0.96O addition on PVA films decreases the thermal stability of the polymer in inert and in oxidative atmosphere. In contrast, the Fe_0.03Zn_0.97O presence in the PVA films seems to increase the thermal stability of the polymer. The characteristic peak of the crystalline phase of PVA and wurtzite phase of the zinc oxide were identified through X-ray diffraction in both films. The crystallinity of the PVA film increases with UV irradiation and with the presence of Ni_0.04Zn_0.96O and Fe_0.03Zn_0.97O. The roughness of the PVA film was not modified by the addition of the doped oxides; however, it increases after UV irradiation, more significantly in the films containing the oxides. The PVA film exhibits absorption around 280 nm characteristic of π–π^∗ transitions related to carbonyl groups from residuals acetate, while the 95/05 PVA/Ni_0.04Zn_0.96O and 95/05 PVA/Fe_0.03Zn_0.97O nanocomposite films show absorption at the visible region which is characteristics of the band gap reduction of the doped oxides. The photoluminescence of PVA was modified by the presence of the oxides in the film. These nanocomposite films are interesting due to their thermal, mechanical (flexible) properties and low cost of production. In addition they are also able to exhibit peculiar optical properties showing potential to be used in photonic devices, gas sensors and organic solar cell applications.     

A prochelator peptide designed to use heterometallic cooperativity to enhance metal ion affinity

A peptide has been designed so that its chelating affinity for one type of metal ion regulates its affinity for a second, different type of metal ion. The prochelator peptide (PCP), which is a fusion of motifs evocative of calcium loops and zinc fingers, forms a 1 : 2 Zn : peptide complex at pH 7.4 that increases its affinity for Zn²⁺ ∼3-fold in the presence of Tb³⁺ (log β₂ from 13.8 to 14.3), while the 1 : 1 luminescent complex with Tb³⁺ is brighter, longer lived, and 20-fold tighter in the presence of Zn²⁺ (log K from 6.2 to 7.5). This unique example of cooperative, heterometallic allostery in a biologically compatible construct suggests the possibility of designing conditionally active metal-binding agents that could respond to dynamic changes in cellular metal status.     

Development of gold nanoparticle based colorimetric method for quantitatively studying the inhibitors of Cu/Zn induced β-amyloid peptide assembly

In this paper, a kind of gold nanoparticle (GNP)-based colorimetric assay has been developed for studying the reversible interaction of β-amyloid peptide (Aβ) with Cu²⁺ and Zn²⁺, and quantitatively analyzing four inhibitors (i.e., EDTA, EGTA, histidine and clioquinol) of Cu²⁺/Zn²⁺ induced Aβ assembly. The inhibition efficiencies (e.g., half maximal inhibitory concentration, IC₅₀ value) of these inhibitors could be measured in this work. As far as we know, these IC₅₀ values were reported at the first time. In this assay, the streptavidin conjugated GNPs (SA-GNPs) were employed as indicators to monitor the Cu²⁺/Zn²⁺ induced aggregating/disaggregating behaviors of biotin modified β-amyloid 1–16 peptides (Aβ_1–16(biotin)). Because of high affinity of streptavidin (SA) with biotin, the aggregating/disaggregating of Aβ_1–16(biotin) results in the significant color change of SA-GNPs. Furthermore, we demonstrate that the assay can be used as an effective tool for designing anti-dementia drugs through quantitative analysis of the interactions of four representative inhibitors with Cu²⁺/Zn²⁺ induced Aβ assembly.     

Structural effects of Zn+2/Mg+2 ratios on crystallization characteristics and microstructure of fluorophlogopite mica-containing glass-ceramics

We report the effect of Mg⁺² substitution (by Zn⁺²) on crystallization kinetics, microstructure, thermal and mechanical properties of boroaluminosilicate glass. Zn²⁺ was selected for Mg²⁺ on the basis of similar ionic radius in six coordination system (Mg²⁺∼0.72 Å, Zn²⁺∼0.75 Å). The melt-quenched glasses with SiO₂–(1 − x) MgO–Al₂O₃–K₂O–B₂O₃–MgF₂ (BPAS)/x ZnO system, have been investigated to establish the effect of Zn⁺²/Mg⁺² ratios. It is found that the density of BPAS glass without zinc content is 2.52 g/cm³ and increased linearly on substitution of Mg²⁺ by 5–32 mol% ZnO. T_g and T_d of BPAS glass initially increased on adding 5 mol% ZnO and then decreased on further addition. From DSC study, it is found that the crystallization exotherm changes significantly in the temperature range 750–1000 °C, where different crystalline phases are formed, and the activation energy of crystallization (E_C) varies in the range of 254–388 kJ/mol. The crystalline phases formed in opaque BPAS glass-ceramic, derived by controlled heat treatment at 800 and 1050 °C (4 h), are identified as fluorophlogopite [KMg₃(AlSi₃O₁₀)F₂] mica and willemite (Zn₂SiO₄) by XRD technique, and confirmed by FTIR spectroscopy. The change of crystallization phenomena varying Zn⁺²/Mg⁺² ratios correspond to significant microstructural change. A wide range of thermal expansion (CTE) values are obtained for the BPAS glasses and corresponding glass-ceramics. CTE (50–500 °C) of BPAS glass without zinc content is 7.76 × 10⁻⁶/K, and decreased sequentially on increasing Zn⁺²/Mg⁺² ratio. The density of glass-ceramics after heating at 800 and 1050 °C increased linearly with increasing Zn⁺² substitution for Mg⁺². Microhardness of the BPAS glasses is in the range of 4.26–6.15 GPa and found to be increased to 4.58–6.78 GPa after crystallized at 1050 °C.     

Polyethylene glycol functionalized Fe3O4@MIL-101(Cr) for the efficient removal of heavy metals from Ligusticum chuanxiong Hort

In recent years, the quality and safety issues of Chinese medicinal herbs have received great attention worldwide. Thereinto, heavy metal contamination has been one of the most serious concerns. Compared to the wide research in the analysis of heavy metals in medicinal herbs, the studies on the removal of heavy metals are relatively limited. In this study, polyethylene glycol functionalized Fe₃O₄@MIL-101(Cr) (Fe₃O₄@MIL-101(Cr)@PEG) was designed and synthesized to remove heavy metals from the decoction of Ligusticum chuanxiong Hort. The in-house fabricated Fe₃O₄@MIL-101(Cr)@PEG was characterized by a porous structure and a large specific surface area. Then, the efficiency of the material for the removal of five heavy metals was tested under optimal adsorption conditions. Meanwhile, the content of Senkyunolide A, Senkyunolide I, and Ferulic acid, the solid content, and the HPLC fingerprints similarity were used as the quality monitoring indicators of Ligusticum chuanxiong Hort decoction before and after the heavy metal removal. Results showed that the magnetic nanomaterial had excellent removal efficiency for As⁵⁺ (81.4 %), Cd²⁺ (88.19 %), and Pb²⁺ (83.79 %) and certain removal efficiency for Ni²⁺ (51.59 %) and Zn²⁺ (55.4 %) under the spiked concentration of 50 μg/mL. The content of Senkyunolide A, Senkyunolide I, and Ferulic acid were decreased by less than 8.00 % after the removal of heavy metals. Besides, the loss rate of solid content was only 0.18 %, and the fingerprints similarity was over 99.9 %. The results indicated that Fe₃O₄@MIL-101(Cr)@PEG could efficiently and selectively remove heavy metals from Ligusticum chuanxiong Hort without affecting its effective components. Due to the advantages of low-cost, simple manipulation, and good efficiency, the material can be recommended for heavy metals removal from the aqueous solutions of medicinal herbs, providing a new and promising application for the removal of exogenous contaminants in medicinal herbs.     

Selective turn-on fluorescence for Zn and Zn + Cd metal ions by single Schiff base chemosensor

Chemosensor based on Schiff base molecules (1, 2) were synthesized and demonstrated the selective fluoro/colorimetric sensing of multiple metal ions (Mn²⁺, Zn²⁺ and Cd²⁺) in acetonitrile–aqueous solution. Both 1 and 2 showed a highly selective naked-eye detectable colorimetric change for Mn²⁺ ions at 10⁻⁷ M. Fluorescence sensing studies of 1 and 2 exhibited a strong fluorescence enhancement (36 fold) selectively upon addition of Zn²⁺ (10⁻⁷ M, λ_max = 488 nm). Fluorescence titration and single crystal X-ray analysis confirmed the formation of 1:1 molecular coordination complex between 1 and Zn²⁺. Interestingly, a rare phenomenon of strong second turn-on fluorescence (190 fold, λ_max = 466 nm) was observed by the addition of Cd²⁺ (10⁻⁷ M) into 1 + Zn²⁺ or Zn²⁺ (10⁻⁷ M) into 1 + Cd²⁺. Importantly both 1 and 2 exhibited different fluorescence λ_max with clearly distinguishable color for both Zn²⁺ and Cd²⁺.     

Development of a ratiometric time-resolved luminescence sensor for pH based on lanthanide complexes

Time-resolved luminescence bioassay technique using lanthanide complexes as luminescent probes/sensors has shown great utilities in clinical diagnostics and biotechnology discoveries. In this work, a novel terpyridine polyacid derivative that can form highly stable complexes with lanthanide ions in aqueous media, (4′-hydroxy-2,2′:6′,2′′-terpyridine-6,6′′-diyl) bis(methylenenitrilo) tetrakis(acetic acid) (HTTA), was designed and synthesized for developing time-resolved luminescence pH sensors based on its Eu³⁺ and Tb³⁺ complexes. The luminescence characterization results reveal that the luminescence intensity of HTTA–Eu³⁺ is strongly dependent on the pH values in weakly acidic to neutral media (pK_a = 5.8, pH 4.8–7.5), while that of HTTA–Tb³⁺ is pH-independent. This unique luminescence response allows the mixture of HTTA–Eu³⁺ and HTTA–Tb³⁺ (the HTTA–Eu³⁺/Tb³⁺ mixture) to be used as a ratiometric luminescence sensor for the time-resolved luminescence detection of pH with the intensity ratio of its Tb³⁺ emission at 540 nm to its Eu³⁺ emission at 610 nm, I_540 nm/I_610 nm, as a signal. Moreover, the UV absorption spectrum changes of the HTTA–Eu³⁺/Tb³⁺ mixture at different pHs (pH 4.0–7.0) also display a ratiometric response to the pH changes with the ratio of absorbance at 290 nm to that at 325 nm, A_290 nm/A_325 nm, as a signal. This feature enables the HTTA–Eu³⁺/Tb³⁺ mixture to have an additional function for the pH detection with the absorption spectrometry technique. For loading the complexes into the living cells, the acetoxymethyl ester of HTTA was synthesized and used for loading HTTA–Eu³⁺ and HTTA–Tb³⁺ into the cultured HeLa cells. The luminescence imaging results demonstrated the practical utility of the new sensor for the time-resolved luminescence cell imaging application.     

An aminoquinoline based fluorescent probe for sequential detection of Znic (II) and inorganic phosphate and application in living cell imaging

A novel fluorescent probe 5‐(diethylamino)‐2‐(((2‐(hydroxymethyl)quinolin‐8‐yl)imino)methyl)phenol ( QS) was synthesized by condensation reaction of 8‐aminoquinoline derivative and 4‐(diethylamino)salicylaldehyde. It was found that the probe QS was capable of high selectivity and sensitivity about specific color and fluorescence changes towards Zn²⁺ ion in EtOH‐H₂O (v/v = 4/1, 0.01 M, Tris–HCl buffer, pH = 7.30) solution. The interaction of QS with Zn²⁺ ion illustrated a “turn‐on” fluorescence response at 550 nm (λ_ex: 458 nm), moreover, after the subsequent addition of inorganic phosphate (Pi) into the solution above, a “turn‐off” fluorescence response was observed. The sensing ability of the probe QS towards Zn²⁺ was confirmed by fluorescence titration, UV–Vis titration and HRMS analysis. Besides, the intracellular sensing behavior of QS with Zn²⁺ and Pi were captured in living PC12 cells. The limit of detection (LOD) for Zn²⁺ and Pi sensing was found to be 0.03 μM and 0.08 μM, respectively.     

Unexpected remote effect in red fluorescent sensors based on extended APTRA

Herein is described the synthesis and spectroscopic characterizations of three new OFF–ON red-emitting and water-soluble sensors, CAXR (Clicked APTRA X-Rhodamine). These dyes are based on an extended APTRA (aminophenol triacetic acid) motif. Three different side chains were added by click chemistry in order to complete the coordination sphere with a chelate moiety composed of a triazolyl and an iminol. The fluorescent response (F/F₀) of these probes follows the order: Cd²⁺>Zn²⁺>Pb²⁺>Hg²⁺. An important and unexpected effect of the side chain structure on the Kd was observed (up to one order of magnitude, Cadmium Kd from 252 to 21 μM). This remote effect of the side chains was studied by DFT calculations and was attributed to a twisted conformation of the CAXR-Py:Cd²⁺ complex.     

Co-precipitation synthesis,humidity sensing and photoluminescence properties of nanocrystalline Co2+ substituted zinc(II)molybdate (Zn1–xCoxMoO4; x = 0, 0.3, 0.5, 0.7, 1)

Zinc-cobalt molybdate composites (Zn_1–xCo_xMoO₄; x = 0, 0.3, 0.5, 0.7, 1) were synthesised by a simple co-precipitation method and characterised by thermogravimetric/differential thermal analysis (TG/DTA), Fourier transform-infrared (FT-IR), Fourier transform Raman (FT-Raman) spectroscopy, X-ray diffraction spectroscopy (XRD), scanning electron microscopy (SEM/EDAX) and transmission electron microscopy (TEM). The surface area was calculated by BET analysis in the adsorption/desorption isotherm. The humidity sensing properties of zinc-cobalt molybdates were tested by dc electrical measurements at different relative humidity environments (RH = 5–98%). The electrical resistance of the composites linearly decreases and the maximum sensitivity of 3672 ± 110 was observed for the Zn_0.3Co_0.7MoO₄ (ZnCM-4) composite towards humidity, which is calculated by the relation S_f = R_5%/R_98%, where the response time is 200 s and the recovery time is 100 s. Photoluminescence (PL) measurement at the room temperature of ZnM-1 composite exhibited a blue emission peak at 475 nm (λ_em) when excited at a wavelength (λ_ex) of 430 nm. During Co²⁺ substitution in Zn²⁺ matrix, a green and red emission peak was observed when excited at a wavelength (λ_ex) of 520 nm.     

A novel Cr3+-activated far-red titanate phosphor: synthesis,luminescence enhancement and application prospect

Plant factory, a new agricultural planting technology, has emerged and rapidly grown in recent years, with phosphor conversion light emitting diodes (pc-LEDs) considered as the first choice of source light for the plant factory. In this study, a new type of Cr³⁺-activated Li₂MgTi₃O₈ phosphor (LMT: Cr³⁺) was synthesized by high temperature solid state method. X-Ray diffraction patterns showed that there was no detectable impurity in these samples. The photoluminescence spectra revealed that this phosphor can emit far-red light with the peak at 740 nm excited by ultraviolet and blue light, overlapped well with the P_FR. After introducing Zn²⁺ ions (LMT: Cr³⁺, Zn²⁺), the luminescence intensity increases by 46% mainly due to the increase of lattice distortion, and internal quantum yield was improved from 25.4% to 41.3% under 365 nm excitation. Finally, the pc-LED devices, consisting of 470 nm chip coated with the optimal phosphor, exhibited good luminescence and overlapping with P_FR. These results indicate that the LMT: Cr³⁺, Zn²⁺ phosphor has the potential application in modern agriculture.     

Study of the binding equilibrium between Zn(II) and HSA by capillary electrophoresis-inductively coupled plasma optical emission spectrometry

A new method has been developed for following the interaction between zinc ion and human serum albumin (HSA) by capillary electrophoresis-inductively coupled plasma optical emission spectrometry. Under optimized experimental conditions, the detection limit (3σ) for free Zn²⁺ ion was found to be 1.34 μM by running 11 replicates of the reagent blank. The RSD was less than 3% and the recovery was more than 98.13%. The linear range of zinc ion concentration was between 5.1 μM and 0.3 M. The measured Zn(II)-HSA combination values of n₁ and K₁ for primary binding of Zn²⁺ to HSA were 1.09 and 2.29 × 10⁵ L mol⁻¹, respectively. The measured values of n₂ and K₂ for the non-specific binding of Zn²⁺ to HSA were 8.96 and 6.65 × 10³ L mol⁻¹, respectively. This new method allows rapid analysis of a small amount of sample, simple operation, while avoiding long periods of dialysis and eliminating interference from other metal ions. This method provides a reliable and convenient new way for studying interactions between metal ions and biomolecules.     

Judd–Ofelt analysis and photoluminescence properties of RE3+ (RE = Er & Nd): Cadmium lithium boro tellurite glasses

Rare earth (Er³⁺ and Nd³⁺) ions doped cadmium lithium boro tellurite (CLiBT) glasses were prepared by melt quenching method. The vis–NIR absorption spectra of these glasses have been analyzed systematically. Judd–Ofelt intensity parameters Ω_λ (λ = 2, 4, 6) have been evaluated and used to compute the radiative properties of emission transitions of Er³⁺ and Nd³⁺: CLiBT glasses. From the NIR emission spectra of Er³⁺: CLiBT glasses a broad emission band centered at 1538 nm (⁴I_13/2 → ⁴I_15/2) is observed and from Nd³⁺: CLiBT glasses, three NIR emission bands at 898 nm (⁴F_3/2 → ⁴I_9/2), 1070 nm (⁴F_3/2 → ⁴I_11/2) and 1338 nm (⁴F_3/2 → ⁴I_13/2) are observed with an excitation wavelength λ_exci = 514.5 nm (Ar⁺ Laser). The FWHM and stimulated emission cross-section values are calculated for Er³⁺ and Nd³⁺: CLiBT glasses. FWHM × σ_e^P values are also calculated for Er³⁺: CLiBT glasses.     

Synthesis,characterization and photocatalytic properties of Mg1−xZnxAl2O4 spinel nanoparticles

Mg_1−xZn_xAl₂O₄ spinel nanoparticles with x = 0, 0.05, 0.10, 0.15 and 0.20 were prepared via the chemical coprecipitation method. The obtained samples were characterised by thermal gravimetric and differential scanning calorimetry, X-ray diffraction, Fourier transform infrared spectroscopy, UV–Vis diffuse reflection spectrum, transmission electron microscopy and ²⁷Al MAS-NMR spectroscopy. Mg_1−xZn_xAl₂O₄ spinel powders with the mean crystallite size of around 11 nm–14 nm were obtained. The crystallinity of the MgAl₂O₄ samples increases with the increase in the calcination temperature. At the same calcination temperature, higher amount of Zn²⁺ substitution leads to the higher level of crystallinity, but has no apparent influence on the mean crystallite size of the samples. The photocatalytic activity of the obtained Mg_1−xZn_xAl₂O₄ spinel nanoparticles was evaluated by monitoring the degradation of methylene blue under UV light. The degradation rates of methylene blue using the MgAl₂O₄ nanoparticles prepared at the calcination temperatures of 700 °C and 800 °C are much higher than those prepared at 900 °C and 1000 °C. The photocatalytic activities of the spinel powders with lower level of Zn²⁺ substitution such as Mg_0.95Zn_0.05Al₂O₄ are inferior to that of MgAl₂O₄. Results of ²⁷Al MAS-NMR spectroscopy analysis and the first principle total density of state calculations reveal that this is probably due to the substitutions of Zn²⁺ decreasing the degree of Al³⁺ ions inversion over the sites of tetrahedral and octahedral coordination. With the increase in the amounts of Zn²⁺ substitution, the effects of Zn²⁺ additions on the photocatalytic activities become gradually predominant, leading to the increases in the degradation rates. The methylene blue degraded by 99% within 4 h using the Mg_0.8Zn_0.2Al₂O₄ spinel powders.     

Photovoltaic characteristics of dye-sensitized surface-modified nanocrystalline SnO2 solar cells

Zinc-modified nanocrystalline SnO₂ electrodes are prepared by chemical treatment of the commercial SnO₂ colloid with zinc acetate and their thickness effects on photovoltaic characteristics are investigated. Open-circuit voltage (V_oc) and fill factor increase with increasing zinc concentration, while short-circuit photocurrent (J_sc) decreases. The normalized incident photon-to-current conversion efficiency (IPCE) shows that increase of zinc concentration utilizes long wavelength light. Concerning the conversion efficiency, optimal concentration within the present experiment is found to be 10 mol.% Zn²⁺ with respect to Sn⁴⁺. As increasing thickness of the films based on 10 mol.% zinc-modified SnO₂ ranging from 0.76 to 8.12 μm, J_sc increases, reaches maximum and then decreases without change in V_oc. The highest conversion efficiency of about 3.4% is achieved under 1 sun of AM 1.5 irradiation for the ∼6.3 μm-thick 10 mol.% zinc-modified SnO₂ film with J_sc of 9.09 mA/cm², V_oc 600 mV and fill factor 62%.