色谱－质谱－红外光谱联用系统研究原煤浸取液及燃煤烟气中环烃类有机污染物

采用美国惠普公司色谱－质谱－红外三联仪，研究了我国典型煤种──青山烟煤中二氯甲烷（ＣＨ２Ｃｌ２）的４１ｈ浸取液和８００℃燃烧排放烟气中脂环烃、苯系物、多环芳烃（ＰＡＨｓ）等环烃类有机污染物的种类、组成及含量。并用ＰＡＨｓ标样对原煤浸取液和烟气中ＰＡＨｓ排放进行了定量评价。通过两种排放源中各有机污染物的组成和含量比较，获得了原煤及燃后烟气中环烃类有机污染物排放的一般规律。     

色谱－质谱－红外光谱联用系统研究原煤浸取液及燃煤烟气中环烃类有机污染物

 采用美国惠普公司色谱－质谱－红外三联仪，研究了我国典型煤种──青山烟煤中二氯甲烷（ＣＨ２Ｃｌ２）的４１ｈ浸取液和８００℃燃烧排放烟气中脂环烃、苯系物、多环芳烃（ＰＡＨｓ）等环烃类有机污染物的种类、组成及含量。并用ＰＡＨｓ标样对原煤浸取液和烟气中ＰＡＨｓ排放进行了定量评价。通过两种排放源中各有机污染物的组成和含量比较，获得了原煤及燃后烟气中环烃类有机污染物排放的一般规律。     

离线超临界流体萃取和气相色谱/质谱联用对实验室内空气中气相有机污染物的测试

通过团体吸附剂富集，再用超临界ＣＯ２脱附后用气相色谱及质谱技术对实验室内空气中气相有机污染物进行了考察。文中对采样和萃取条件进行了优化，并与热脱附所得结果做了比较。结果表明在２２ＭＰａ，８０℃时，用甲醇改性的超临界ＣＯ２进行萃取的结果优于热脱附法。该法鉴定出气相有机污染物中５２个组分，占色谱峰总面积的９９．６％。     

离线超临界流体萃取和气相色谱／质谱联用对实验室内空气中气相有机？…

通过固体吸附富集，再用超临界ＣＯ２脱附后用气相色谱及质谱技术对实验室内空气中气相有机污染物进行了考察，文中对采样和萃取条件进行了优化，并与热脱附所得结果做了比较，结果表明在２２ＭＰａ，８０℃时，用甲醇改性的超临界ＣＯ２进行萃取的结果优于热脱附法，该法鉴定出气相有机污染物中５２个组分，占色谱峰总面积的９９．６％。     

煤烟气中痕量有机物的分析及去除

采用不同吸附剂对煤烟气中的痕量有机物进行了富集，比较了各种吸附剂的富集能力，对富集的样品用索氏提取及超临界流体萃取装置进行了萃取，用ＧＣ－ＭＳ－ＤＳ联用方法作了定性鉴定，指出超临界萃取技术在提取煤烟气中痕量有机物方面的优势。探讨了用催化转化法去除煤烟气中有机污染物的可能性。     

水中有机污染物前处理方法进展

综述了水样中有机污染物前处理方法的进展情况；重点介绍液-液萃取、固相萃取、液相微萃取、膜萃取和顶空处理技术5种前处理方法的一些基本情况及其优缺点。     

液上气相色谱法用于气-液平衡测定的研究

〕本文自行设计安装一套以减压法采样的液上采样装置,选择出在与气相色谱仪配套使用中的合适操作条件。并用两组文献中的气-液平衡数据检验了自制液上采样系统的可靠性。讨论了用液上气相色谱法测定溶液平衡总压的可行性。     

分散液-液微萃取技术在污染物分析中的应用

分散液-液微萃取技术是一种新型的、具有巨大潜力的样品前处理技术,已经越来越多地被应用到多种污染物的富集过程中。此方法具有简单、快速、价格低廉、环境友好、回收率和富集倍数高等优点。近年来,作为一种可行的分析技术,分散液-液微萃取技术获得了持续的关注和广泛应用。该文综述了分散液-液微萃取技术的研究进展及其在不同介质污染物分析中的应用。     

毛细管色谱-质谱法测定环境大气中挥发性有机污染物

毛细管色谱-质谱法测定了环境大气中挥发性污染物。用液氧冷冻法和常温吸附法(TenaxGC)分别采集大气样品,然后用两种系统进行浓缩,并进入毛细管色谱-质谱体系,完成了有机污染物的定性定量分析。解决了一些色谱-质谱联用中的问题。并且还讨论了无分流进样问题,比较了两种采样方法。用此方法测定了某炼油厂环境大气中的污染物。     

液膜富集分光光度法测定水中痕量铬（Ⅵ）

本文研究了分离，富集Ｃｒ（Ⅵ）的最佳液膜组成和实验条件，确立了兰１１３Ｂ－ＴＯＡ－煤油－液体石蜡－ＮａＯＨ液膜体系。用本法富集，测定工业废水中的Ｃｒ（Ⅵ），富集倍数达７５，相对标准偏差为１．１％，回收率９９％以上。     

激光解吸电离质谱新型液相基质研究

选用包括纳米粒子在内的多种基质化合物,构成了多种不同组成的液相基质.以多肽、蛋白、大环寡糖和有机小分子等数种类型化合物为样品,系统地考察了不同液相基质在基质辅助激光解吸电离飞行时间质谱(MALDI-TOF)分析中的应用情况,探讨了与固体制样方法的异同点.实验结果表明,有些液相基质对多类化合物具有较好的通用性,而有些液相基质对某些特定类型化合物的分析特别有效.     

Synthesis, characterisation and liquid crystal properties of 2,5-bis[5-alkyl(alkoxy)phenyl-1,3,4-oxadiazole]bromobenzenes

A series of new thermal bilateral liquid crystal compounds with the phenylenebis-1,3,4-oxadiazole structure was synthesised. The molecular structures of the oxadiazole compounds were confirmed by FT-IR and ¹H NMR spectroscopy, elemental analysis and mass spectrometry. Thermogravimetric analysis indicates that the compounds in an atmosphere of nitrogen have good thermal stability. Measurements using differential scanning calorimetry, polarising optical microscopy and temperature-dependent wide-angle X-ray diffraction indicated that the liquid crystalline properties are related to the length of the end groups. When the end group was tert-butyl or alkoxy with four and six carbons, the compounds exhibit no liquid crystal phase. However, compounds with end groups containing more than eight carbons show significant bidirectional thermally-induced liquid crystal properties and the structure of the liquid crystal phase is the lamellar smectic A phase. All the compounds exhibit blue fluorescence.     

Synthesis,characterisation and liquid crystal properties of 2,5‐bis[5‐alkyl(alkoxy)phenyl‐1,3,4‐oxadiazole]bromobenzenes

A series of new thermal bilateral liquid crystal compounds with the phenylenebis‐1,3,4‐oxadiazole structure was synthesised. The molecular structures of the oxadiazole compounds were confirmed by FT‐IR and ¹H NMR spectroscopy, elemental analysis and mass spectrometry. Thermogravimetric analysis indicates that the compounds in an atmosphere of nitrogen have good thermal stability. Measurements using differential scanning calorimetry, polarising optical microscopy and temperature‐dependent wide‐angle X‐ray diffraction indicated that the liquid crystalline properties are related to the length of the end groups. When the end group was tert‐butyl or alkoxy with four and six carbons, the compounds exhibit no liquid crystal phase. However, compounds with end groups containing more than eight carbons show significant bidirectional thermally‐induced liquid crystal properties and the structure of the liquid crystal phase is the lamellar smectic A phase. All the compounds exhibit blue fluorescence.     

Thermotropic Liquid Crystals Formed by Intermolecular Hydrogen Bonding Interactions

The role of hydrogen bonding in the formation or stabilization of liquid crystalline phases has only recently been appreciated. Following the first, wellestablished examples of liquid crystal formation from the dimerization of aromatic carboxylic acids, through hydrogen bonding, several classes of compounds have recently been synthesized, the liquid crystalline behavior of which is also dependent on intermolecular hydrogen bonds between similar or dissimilar molecules. In this review the main classes of compounds exhibiting liquid crystallinity due to hydrogen bonding are presented to show the diversity of organic compounds that can be used as building elements in liquid crystals. The molecules are either of the rigid-rod anisotropic or amphiphilic types such as molecules appropriately functionalized with pyridyl and carboxyl groups, whose interaction leads to the formation of liquid crystals; amphiphilic carbohydrates and amphiphilic and bolaamphiphilic compounds with multiple hydroxyl groups whose dimerization or association is indispensable for the formation of liquid crystals; and certain amphiphilic carboxylic acids with monomeric or polymeric mesogens and amphiphilic-type compounds bearing different moieties, whose interaction may lead to the formation of mesomorphic compounds. Associated with the macroscopic display of liquid crystalline phases is the supramolecular structure, and therefore rather extended discussion of these structures are included in this review.     

液晶性芳香酰胺化合物的合成

合成了一系列炖粹以酰胺基为中心桥键的刚性芳香酰胺小分子化合物，并对其作了表征，发现其中有些化合物具有液晶性。酰胺键之间能形成很强的分子间氢键，使芳香酰胺小分子化合物的熔点很高，难于形成液成液晶态。研究发现，如果在这类化合物的中心苯环上引入合适的取代基以减弱分子间氢键，同时引入合适的末端基时，则可使芳香酰胺化合物生成液晶相的能力增强。     

meso-四(间烷氧基苯基)卟啉及其铜配合物的合成、 表征和性能研究

设计合成了meso-四(间烷氧基苯基)卟啉及其19个铜配合物, 其中16个为未见报道的化合物. 研究了其合成、分离、纯化方法, 得到了这两个系列化合物的晶体或固体, 其结构经 1H NMR, MS, IR, UV和元素分析确证. 研究了这两个系列化合物的液晶性能, 发现13个化合物具有液晶性, 其液晶行为表现为升温单变液晶. 还研究了烷氧基链长、金属离子和分子空间结构对卟啉化合物液晶性能的影响.     

Synthesis and liquid crystalline properties of a series of cholesterol‐based dimesogenic compounds

The synthesis and mesomorphic properties of a series of novel dimesogenic compounds containing the cholesteryl ester unit and a phenyl benzoate group are reported. The two mesogenic units of these compounds are linked through dicarboxylic ester bonds, with alkylene spacer lengths of 2, 4, 6 and 8 methylene units. The chemical structures and liquid crystalline properties of this series of compounds were characterized by FTIR, ¹H NMR, hot stage‐coupled polarizing microscopy and DSC. The results show that this series of compounds are cholesteric liquid crystals over a wide range, both during heating and cooling, and they exhibit iridescent colours in the liquid crystalline state.     

Synthesis and liquid crystalline properties of a series of cholesterol-based dimesogenic compounds

The synthesis and mesomorphic properties of a series of novel dimesogenic compounds containing the cholesteryl ester unit and a phenyl benzoate group are reported. The two mesogenic units of these compounds are linked through dicarboxylic ester bonds, with alkylene spacer lengths of 2, 4, 6 and 8 methylene units. The chemical structures and liquid crystalline properties of this series of compounds were characterized by FTIR, ¹H NMR, hot stage-coupled polarizing microscopy and DSC. The results show that this series of compounds are cholesteric liquid crystals over a wide range, both during heating and cooling, and they exhibit iridescent colours in the liquid crystalline state.     

加拿大合成原油减压馏分油及其催化裂化液体产物中含硫化合物分析

应用GC PFPD和GC MS技术对加拿大油砂合成原油（Synthetic Crude Oil,简称SCO）减压馏分油（350 ℃~500 ℃）中的含硫化合物进行定性定量分析。结果表明,所含硫化物主要是C3~7二苯并噻吩,而催化裂化反应后则以短侧链二苯并噻吩为主,还含少量烷基苯并噻吩和烷基噻吩,三者的质量分数分别为82.04%、13.42%和0.56%,均属于难以加氢脱除的含硫化合物。SCO减压馏分油和大港减压馏分油按不同比例混合后进行催化裂化反应,随着加拿大合成原油减压馏分油搀兑比增加,所得液相产物中烷基噻吩和烷基苯并噻吩质量分数逐渐降低,烷基二苯并噻吩相对质量分数增加,4-MDBT是丰度最高的含硫化合物,显示加氢油的特征。随掺兑比的提高,液相产物中总硫质量分数和柴油馏分中硫质量分数逐渐增高,而汽油馏分中硫质量分数逐渐降低。     

Ionic Liquid–Liquid Extraction and Supported Liquid Membrane Analysis of Lipophilic Wood Extractives from Dissolving-Grade Pulp

In this study, the extraction of lipophilic wood extractives from dissolving pulp samples using ionic liquid–liquid extraction and a two phase hollow fibre supported liquid membrane was investigated. Ionic liquids are capable of dissolving a range of organic and polymeric compounds and are biodegradable, with a negligible vapour pressure. Pulp samples were dissolved in a suitable amount of molten 1-butyl-3-methylimidazolium chloride to give 5 % cellulose solution. Pure cellulose was regenerated by adding water and filtered off. The ionic liquid-aqueous filtrate was first extracted for lipophilic extractives using liquid–liquid extraction. Then, a two phase hollow fibre supported liquid membrane extraction of lipophilic extractives was performed to extract the derivatized compounds prior to analysis by gas chromatography mass spectrometry. The operational parameters of this sample preparation approach were optimised using sterols and fatty acid methyl esters. The variation of enrichment factors and extraction efficiency with respect to liquid membrane, extraction time, stirring speed and sample pH were observed and used to get the optimal parameters. The approach was used in the analysis of oxygen bleached dissolving pulp samples in which main compounds identified were fatty acids, sterols, fatty alcohols, steroid hydrocarbons and ketones. These compounds were similar to those obtained using molecular solvent extraction method, which indicated the absence of chemical reaction between extractives and ionic liquid used.