不同交联剂对甲基丙烯酸-β-羟乙酯/E-51双甲基丙烯酸酯聚合物水凝胶性能的影响

以水溶性单体甲基丙烯酸-β-羟乙酯(HEMA)与大分子交联剂E-51双甲基丙烯酸酯(E-51-DMA)(质量比HEMA/E-51-DMA=90/10)为主要原料,分别引入了5种小分子交联剂:N,N′-亚甲基双丙烯酰胺(MBA)、二乙烯基苯(DVB)、双甲基丙烯酸乙二醇酯(EDMA)、1,1,1-三(丙烯酰氧甲基)丙烷(TAP)和2,2,2-三(丙烯酰氧甲基)乙醇(TAE),采用本体聚合方法合成了5个系列的聚合物水凝胶.研究了小分子交联剂的类型及用量对水凝胶溶胀性能、杨氏模量以及有效交联密度ve和聚合物-水相互作用参数χ的影响,并比较了不同交联剂的交联效率.结果表明,随着小分子交联剂用量的增大,水凝胶平衡含水量EWC逐渐降低,聚合物体积分数2逐渐增大,反映聚合物网络结构的有效交联密度ve以及热力学参数聚合物-水相互作用参数χ值也随之增大.通过理论交联密度和有效交联密度的线性拟合,得到所选用的5种小分子交联剂在E-51-DMA10/HEMA90水凝胶体系中的交联效率,其顺序为DVB>EDMA>TAE>MBA≈TAP.     

原位聚合法制备具有温敏PNIPAM壳的核-壳结构聚合物纳米微球的研究

结合大分子自组装和原位自由基聚合方法,采用油溶性引发剂偶氮二异丁腈(AIBN),在聚(ε-已内酯)(PCL)纳米粒子表面引发聚合单体N-异丙基丙烯酰胺(NIPAM)和交联剂亚甲基双(丙烯酰胺)(MBA),制备得到了核-壳结构的PCL/PNIPAM聚合物纳米微球.系统研究了单体和交联剂用量、壳层目标交联度、初始PCL/DMF溶液的浓度及引发剂AIBN含量4个反应参数对核-壳结构PCL/PNIPAM纳米微球的PNIPAM壳层得率、微球尺寸、温敏性能及电镜形貌的影响.结果表明,在制备核-壳结构PCL/PNIPAM纳米微球的反应过程中,PCL粒子表面的聚合和水中的聚合二者之间相互竞争.适当增加引发剂AIBN的添加量,有利于制备得到核/壳比例可控的PCL/PNIPAM纳米微球;交联剂MBA较高的反应活性导致形成了非均匀交联的PNIPAM壳层.     

双重交联VSNPs-PAA纳米复合水凝胶的制备及其溶胀性能的研究

采用自由基聚合法合成了乙烯基硅纳米粒子-聚丙烯酸(VSNPs-PAA)双重交联复合水凝胶,考察了交联剂、引发剂、单体以及p H值、温度、盐溶液等对水凝胶溶胀行为的影响。结果表明,引发剂浓度为0.08%,交联剂浓度为0.1%,单体浓度为80%时,合成的水凝胶溶胀性能最大,吸水率达到5000%以上;该水凝胶不仅具有p H值敏感性和p H值变化下良好的反复性,而且在p H4的酸性溶液中表现出温度敏感性,其溶胀率随温度的升高而增大;水凝胶的溶胀率随着盐溶液浓度的增大而减小。     

制备核-壳结构聚合物纳米微球和空心球的原位聚合方法的普适性研究

采用原位聚合制备核-壳结构聚合物纳米微球和空心球的新方法, 利用甲基丙烯酸2-羟丙酯(HPMA)和乙酸乙烯酯(VAc)两种单体, 在类似的反应条件下, 成功地制备了以聚(ε-己内酯)(PCL)为核, 分别以交联PHPMA和PVAc为壳的纳米微球; 将微球的核酶解后, 分别得到了对应的交联PMAA空心球和交联PVA空心球. 结果表明, 原位聚合制备核-壳结构聚合物微球的新方法具有一定的普适性, 适用于单体可溶于水而生成的聚合物不溶于水的体系.     

聚合物纳米微球增韧水凝胶的制备与表征

通过无皂乳液聚合制备阳离子纳米微球(NPs),并将其作为疏水交联中心来制备高强韧水凝胶。体系中的疏水单体甲基丙烯酸月桂酯(LMA)在表面活性剂作用下聚集到纳米微球表面,形成疏水缔合中心,通过原位引发自由基聚合得到纳米微球杂化的聚丙烯酰胺疏水缔合水凝胶P(AAm-LMA)-NPs。当凝胶受到应力时,由纳米微球形成的动态交联点通过断裂与重组可以有效地耗散能量,极大地提高了凝胶的强度和韧性。因此,所制备的P(AAm-LMA)-NPs水凝胶表现出十分优异的机械性能,其最大拉伸强度可达860 kPa,断裂伸长率为1280%,断裂韧性为3.8 MJ/m³。聚合物纳米微球增韧水凝胶的力学性能优异,有望在生物医学和工业领域有重要应用。     

壳聚糖复合纳米凝胶的聚合诱导自组装制备及生物应用

以生物大分子壳聚糖为主要组成基元,在壳聚糖的羟基碳上引发单体自由基共聚合。在聚合过程中疏水的合成高分子接枝链与亲水的壳聚糖分子自组装诱导形成纳米尺度的聚集体,通过引入具有肿瘤还原环境响应性的交联剂,得到了肿瘤环境响应的壳聚糖-合成高分子共聚物纳米凝胶。采用透射电镜、红外光谱等手段对纳米凝胶的粒径、结构、形貌和性能进行表征,探讨了聚合诱导自组装高效制备壳聚糖纳米凝胶的机理,证实了所得纳米凝胶粒径的可控性。进一步采用近红外荧光分子和磁共振显影(MRI)分子标记的方法制备了荧光/MRI多功能复合纳米凝胶,对凝胶显影性能进行了探讨,证实了其优异的细胞标记能力和良好的生物相容性。     

室温交联型硅丙微胶乳的合成研究Ⅲ.聚合工艺对聚合稳定性及胶膜性能的影响

采用两种聚合工艺(种子微乳液聚合法和单体预乳化法)分别合成了室温交联型有机硅改性丙烯酸酯聚合物微胶乳，研完了不同工艺条件对聚合稳定性、乳胶粒径和胶膜的结构性能的影响．     

回流沉淀聚合:单分散聚合物纳米水凝胶微球制备新技术

针对高效制备单分散聚合物纳米水凝胶微球手段欠缺问题,我们发展了一种新型的纳米水凝胶微球制备新技术——回流沉淀聚合技术,与以往的沉淀聚合及蒸馏沉淀聚合相比,该方法效率更高、普适性更强、操作更简单,适合高效制备单分散的纳米水凝胶微球及其复合微球.通过考察制备聚甲基丙烯酸微球过程中的反应时间、固含量、交联剂含量、混合溶剂比例等影响因素,成功制备了形态可控、尺寸均一、水中分散性良好的聚甲基丙烯酸纳米水凝胶微球,并给出了微球形态控制的基本规律.通过该技术制备的纳米水凝胶微球及其复合微球将被广泛用于生物医用材料中.     

高强度银纳米线/聚丙烯酰胺复合水凝胶的制备及导电性能研究

近年来,导电水凝胶作为一种功能聚合物软材料在柔性电子器件领域显示出广泛的应用前景,因此发展高强度导电水凝胶的合成方法在基础和应用研究中均具有重要的价值.本文提出了一种制备高强度导电水凝胶的简便方法,利用银-硫配位作用实现一维银纳米线(AgNWs)与含硫有机聚合物的有效复合,在提高水凝胶强度的同时,赋予其高的导电性.具体制备步骤如下:首先通过1-烯丙氧基-2,3-环硫丙烷的开环聚合得到侧基带乙烯基的线性聚硫醚(P1),通过巯-烯click反应引入足够量的羧基,赋予其水溶性.修饰后的线性聚硫醚(P2)与一维AgNWs通过银-硫配位作用制备复合交联剂(AgNWs@P2).该交联剂与丙烯酰胺(Am)单体以过硫酸钾(KPS)为引发剂,在水溶液中进行自由基聚合制备银纳米线/聚丙烯酰胺复合水凝胶(AgNWs/PAm composite hydrogel, AC gel).高分辨场发射扫描电子显微镜的测试证实,AgNWs与P2在水凝胶中实现了纳米尺寸上的复合.刚性AgNWs的引入赋予水凝胶优异的力学强度,其拉伸应变和断裂强度可达到～4500%和～2.2 MPa.该水凝胶具有高导电性(σ=0.44 S/...     

N-烷基丙烯酰胺温敏聚合物合成研究进展

聚N-烷基丙烯酰胺因表现出温度敏感的特殊性能而成为高分子领域的研究热点,具有非常好的应用潜力。本文评述了线性和聚凝胶化N-烷基丙烯酰胺温敏聚合物的合成研究进展,分别介绍了水溶液自由基聚合合成线性N-烷基丙烯酰胺温敏聚合物的研究进展和化学交联、物理交联、辐射交联聚合凝胶化N-烷基丙烯酰胺温敏聚合物的合成研究进展,并对线性温敏聚合物和凝胶化文敏聚合物合成方法优缺点、单体选择、应用范围进行了讨论。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.