二维材料改性水性聚氨酯防腐涂料的研究进展

水性聚氨酯涂料作为一种新兴的环保涂料,在防腐领域得到了广泛应用。然而,水性聚氨酯涂料交联密度低,耐水性稍差,不利于其长效防腐性能。利用具有独特物理化学特性的二维材料作为水性聚氨酯的填料,可以有效改善其性能。本文主要介绍了三种二维材料(石墨烯、MXene和六方氮化硼)作为填料与水性聚氨酯进行复合,并重点介绍了石墨烯、MXene和六方氮化硼的改性方法,并对水性聚氨酯复合涂层的性能进行了阐述和比较,最后对未来二维材料/水性聚氨酯的复合材料的发展和应用进行了展望。     

聚氨酯树脂及其应用

聚氨酯树脂作为一种具有高强度、抗撕裂、耐磨等特性的高分子材料，在日常生活、工农业生产、医学等领域广泛应用。本文简述了聚氨酯树脂的历史，综述了其应用，介绍了几种新型聚氨酯树脂及废旧聚氨酯的回收方法。     

X射线不透性体温固化聚氨酯髓核假体材料的研究

为了制备X光可显影且可以体温固化的聚氨酯,合成了N,N'-双(1,3-二羟基丙基)-2,3,5,6-四碘对苯二甲酰胺(BDTIP)含碘四元醇,将其作为聚氨酯固化的交联剂和X光显影剂,与聚氨酯预聚物混合反应得到一种新的可用于人工髓核假体的材料.利用红外光谱监测BDTIP的反应程度;利用X射线对不同BDTIP含量的聚氨酯材料的显影效果进行评定;利用噻唑蓝(MTT)比色法测试材料细胞毒性,并对具有不同碘含量聚氨酯材料的力学性能进行了对比研究.结果表明,碘的加入对聚氨酯的显影效果有很好的促进作用,较低碘含量(0.2 wt%)的聚氨酯材料即有较好的X光显影效果,而且此时聚氨酯依然保持较好的力学性能;MTT法测试表明含BDTIP的聚氨酯材料不具有细胞毒性.     

综合性高分子化学实验设计：硬质聚氨酯泡沫材料制备与性能表征

针对传统“高分子化学实验”课程教学中,存在综合性、研究性实验项目少,不能支撑“新工科”人才实践和创新能力培养要求等问题,开发了硬质聚氨酯泡沫材料制备与性能表征综合实验项目。采用全水发泡体系,通过调节发泡剂和阻燃剂用量,制备了七组聚氨酯泡沫材料,然后采用国标方法表征了材料的表观密度、压缩强度和氧指数,分析了发泡剂和阻燃剂不同配比对泡沫材料性能的影响及原因。本实验贴近高分子产业发展,突出综合性和研究性,教学过程实现了基本实验技能与科学研究方法训练的有机结合,有助于提升高分子化学实验课程“创新性、高阶性和挑战度”,支撑“新工科”人才培养。     

硬质聚氨酯泡沫塑料阻燃研究进展

本文阐述了硬质聚氨酯泡沫塑料阻燃研究的必要性和重要性,介绍了硬质聚氨酯泡沫塑料的燃烧过程,概述了阻燃材料的三种作用机理。文中介绍了硬质聚氨酯泡沫塑料的几种常用的添加型阻燃剂,总结了它们各自的阻燃机理、优缺点及研究进展,指出由具有协同作用的阻燃元素构成的复配型阻燃剂是当下研究热点。文中还举例介绍了反应型阻燃剂常用的改性方法以及创新性的思路,最后阐述了硬质聚氨酯泡沫塑料阻燃技术的现状及未来发展趋势。     

我国丁腈橡胶产业发展现状及未来发展趋势

概述了全球丁腈橡胶(NBR)的产能等状况,分析了我国NBR的产能、产量及消费现状,介绍了我国主要NBR生产厂家的产品结构和价格变化等情况。从环保型NBR开发、三元共聚NBR、氢化丁腈橡胶(HNBR)产品开发、乳液聚合动力学基础研究、NBR在线监测技术发展及国内NBR在关键技术进步、聚合工艺改进和新产品开发等几个方面介绍了国内外NBR生产技术的最新进展,并展望了我国未来NBR的市场及技术发展趋势。紧密联系市场,优化聚合反应配方,改进生产工艺,提高过程控制水平,研发高性能NBR的新牌号,绿色环保化生产及提高产品服务质量是增强NBR产品市场竞争力的重要举措。     

解析聚氨酯复合材料在生物医学领域的应用

聚氨酯(Polyurethane)作为一种性能优异的有机高分子合成材料,是目前使用范围最广且具有粘弹性和可生物降解性的聚合物之一.因其优异的力学特性、耐磨性、可加工性及柔韧性,在表面材料、涂料、包装材料、建筑物的室内地板、人造皮革及生物医学领域有广泛应用.其中,最具前瞻性的是其作为功能材料在生物医学领域的应用,如人工器...     

PUT/SiO2复合材料的制备与表征

利用溶胶-凝胶法将硅烷染料、含硅氧烷的非线性聚氨酯与正硅酸乙酯(TEOS)共水解, 缩合制备了新型聚氨酯噻唑(PUT/SiO2)纳米复合材料, 并用IR、SEM、TEM、UV-Vis、DSC和TGA对其结构和性能进行了表征. 结果显示, 材料中聚氨酯与SiO2以共价键相连, 没有发生相分离, 且其中非线性较好的噻唑生色团含量和材料的玻璃化转变温度(Tg)、热分解温度(Td)都较纯非线性光学材料(NLO)聚氨酯(PU)有显著增加, 可以用来制备性能优良的二阶非线性光学器件.     

聚异丁烯基生物惰性弹性体的研究进展

聚异丁烯由于其全饱和结构,有且仅存在碳氢键,所以聚异丁烯基材料大多具有良好的生物稳定性和相容性。近年来关于聚异丁烯基生物惰性弹性体的研究取得了许多的进展,包括PIB-poly(methyl methacrylate)(PMMA)用于骨关节粘合剂、PIB-cyanoacrylate(CA)用于腰椎间盘替换、基于PIB的两亲网络(APNs)用于免疫隔离膜、聚异丁烯基聚氨酯(PU)及聚脲的发展。另外,在poly(styrene-b-isobutylene-b-styrene)(SIBS)生物医用材料方面也取得了重要进展,其中包括SIBS应用于药物释放载体、青光眼导流管、心脏瓣膜以及人工血管等方面。最后,本文也对聚异丁烯基生物惰性弹性体的未来发展进行了展望。     

汽车用聚氨酯减振材料的结构与性能

利用扫描电镜(SEM)对减振材料的微孔结构进行了表征;用万能材料试验机(UMTM)、动态热机械分析仪(DMA)、旋转流变仪表征了减振材料在不同条件下的力学及减振性能.研究发现:不同聚氨酯减振材料进入非线性形变区域的压缩形变大小与微孔的面积占有率相关.我们认为聚氨酯泡沫减振材料在小压缩应变下应力的缓慢增加主要是由微孔的变形引起的,随着压缩应变进一步增加,微孔的变形接近极限,此时应力的快速增加主要由聚氨酯本体的力学性能决定.聚氨酯减振材料的损耗能随着压缩应变的增加而增加,减振性能好的材料具有较大的损耗能.聚氨酯减振材料的损耗角随着压缩频率的增加而略有增加,其影响减振材料在不同使用频率下的减振和产热性能.聚氨酯减振材料的损耗角随着温度的变化而发生变化,耐寒性和耐热性好的材料,损耗角随温度平缓变化的温度范围更宽.当减振材料受到一定的负载后,材料的损耗角降低.     

New materials from telechelic polyacetals

Telechelic polyacetals, obtained by cationic ring-opening polymerization of 1,3-dioxolane (DXL) and 1,3-dioxepane (DXP), have been used as building blocks for polymer materials. In the first part of this paper, the synthesis and the properties of networks based on polyDXL α,ω-bis(methacrylates) are discussed. The second part deals with the synthesis and the properties of polyacetal polyurethanes. A thermoplastic polyurethane was prepared with poly(DXL-co-DXP) α,ω-diol as soft segment and the combination butane-1,4-diol and hexamethylene diisocyanate as hard segment. Polyurethane networks were obtained from polyacetal polyols and diphenylmethane diisocyanate (MDI). Some physical properties of these new materials are reported.     

Tetrablock Copolymers Based on Oligoether Diols, 2,4-toluene diisocyanate,Isophorone Diisocyanate,and Methylene-bis-о-chloroaniline

Tetrablock polyurethane ureas with mixed soft segments and dissimilar hard urethane urea blocks, based on oligo(propylene oxide)diol, oligo(tetramethylene oxide)diol, 2,4-toluene diisocyanate, isophorone diisocyanate, and methylene-bis-o-chloroaniline as a low-molecular-mass chain extender were synthesized and studied. The fragmentary ordering of the polymer chains of the new polyurethane urea was proved by rheokinetic data. The structure–property relationship for the polymer was found. The new polyurethane ureas surpass in the true strength the available diblock polyurethane ureas with poly(propylene oxide) soft segments by a factor of 1.5. The strength properties of the new tetrablock polyurethane ureas only weakly depend on the strain rate varied in the range 0.56–0.006 s^–1.

     

Nouveaux Élastomères de polyuréthanes dérivés d'aminoacides

Synthesis and characterization of new polyurethane elastomers with rigid blocks derived from aminoacids have been achieved by polycondensation using poly(tetramethylene oxide) (PTMO) as a soft segment. Aminotelechelic oligopeptides or pseudopeptides were used in the hard block, eventually in association with lysine diisocyanate (ethyl 2, 6-diisocyanatohexanoate, LDI). Physicochemical characteristics of the so obtained materials, especially good filmmaking properties, allow their use as biomaterials of reduced toxicity.     

偏蓝相干法聚氨酯合成革的制备工艺

本文研究了溶剂型聚氨酯在合成革中的展色性能,以4,4-二苯基甲烷二苯基甲烷二异氰酸酯、己二酸、乙二醇、1,4-丁二醇、甲基丙二醇、N,N-二甲基甲酰胺及乙酸乙酯为主要原料。考察了多元醇组成、扩链剂种类及溶剂组成等因素对干法聚氨酯合成革展色性影响规律。结果表明,当己二酸系聚酯二元醇中乙二醇与1,4-丁二醇的摩尔比为1∶1时、所用扩链剂组成为乙二醇与甲基丙二醇的摩尔比为1∶0.5,所使用的溶剂中N,N-二甲基甲酰胺与乙酸乙酯的质量比为2∶1时,制备得到的干法聚氨酯合成革的展色性能最佳(偏蓝相)。     

FTIR-ATR技术研究聚氨酯类文物保护材料的光降解

Polyurethanes are one kind of relic protection materials commonly used. During artificial photo-ageing, three polyurethanes, HDI-based polyurethane, MDI-based polyurethane and TDI-based polyurethane, have been considered to undergo UV radiation. Photochemical degradation of the polyurethanes has been monitored by means of Fourier transform infrared spectroscopy with attenuated total reflection accessory （FTIR-ATR）. It was proved that the mechanism of the photochemical degradation of polyurethanes might be the scissions of carbamate （urethane） groups and the re-reactions of radical groups formed in the scission reactions. From the experiment results HDI-based polyurethane, an aliphatic diisocyanate, could be considered to be more suitably used as relic protection materials among these three polyurethanes for its ageing products with less color.     

巯基-烯光点击反应辅助合成多官能度蓖麻油基聚氨酯丙烯酸酯

研究巯基-烯光点击反应辅助合成多官能度蓖麻油基聚氨酯丙烯酸酯。首先通过光引发的巯基-烯点击反应,于蓖麻油分子上引入巯基乙醇,形成多羟基化合物,然后加入丙烯酸羟丙酯与异佛尔酮二异氰酸酯,以物质的量为1:1反应得到端异氰酸酯丙烯酸酯,最终得到蓖麻油基聚氨酯丙烯酸酯。通过调节羟基含量可以得到不同官能度的丙烯酸酯。采用红外光谱、核磁氢谱、热重分析等手段表征其结构和性能,并测试了合成的聚氨酯丙烯酸脂的吸水率、附着力等性能,同时考察了它的热稳定性。结果表明, 在紫外光照射下,巯基和不饱和双键之间发生了加成反应;该聚合物的固化膜性能得到提高,尤其是硬度和热稳定性。由本文快速合成方法得到的树脂性能良好,具有较好的应用前景,扩大了巯基-烯光点击反应在高性能UV固化材料方面的应用范围。     

Preparation of waterborne polyurethane nanocomposites: Polymerization from functionalized hydroxyapatite

We report the preparation and characterization of waterborne polyurethane (WBPU)/hydroxyapatite (HAp) nanocomposites through in situ polymerization from functionalized HAp. The HAp nanoparticles (HAp NPs) were urethanated with 3-isocyanatemethyl-3,5,5-trimethyl-cyclohexylisocyanate (isophorone diisocyanate) to obtain grafted HAp NPs containing isocyanate groups (HAp-g-NCO) as crosslinkers and then the HAp-g-NCO is further polymerized with WBPU monomers to form the WBPU/HAp nanocomposites. The HAp NPs were homogeneously dispersed in the polyurethane matrix at low loading levels (?2.0 wt%), thus the mechanical strength and the elongation at break of the WBPU/HAp nanocomposites were significantly improved. Thermal stability and water resistance of the WBPU/HAp nanocomposites are also enhanced. These results suggest that the WBPU/HAp nanocomposites prepared by in situ polymerization hold the potential as new materials with improved mechanical properties, thermal stability and water resistance.     

Thermal stability of polyurethane materials based on castor oil as polyol component

Preparation of the series of polyurethane elastomers and its nanocomposites from castor oil (a vegetable triglyceride) and different isocyanates (aromatic: toluene diisocyanate, TDI and aliphatic: isophorone diisocyanate, IPDI) is described. The synthesis was carried out in bulk and without catalyst by a one-step reactive process. Different elastomers were prepared by using several stoichiometric imbalances. For polyurethane nanocomposites based on TDI, titanium(IV) oxide nanoparticles was used. The thermal properties of the materials are discussed on the basis of simultaneous TG-DSC measurements results and TMDSC data. TMDSC results show that T _g increases with increasing r = NCO/OH ratio. Namely, with increasing NCO/OH ratio the cross-linkage density increases and as a consequence, the chain mobility decreases, resulting in a higher T _g. It was estimated that the T _g of the samples decreased as the nanofiller content increased due to the changes in the segmental mobility in polyurethane materials. Thermal data refers to increased stability of nanocomposites compared with that of the unfilled elastomers.     

对苯二异氰酸酯基聚氨酯弹性体交联度对其形态与摩擦性能的影响

聚氨酯弹性体的摩擦性能在诸如船舶、汽车、生物医用等领域具有十分重要的意义,而通过化学修饰策略实现该类材料摩擦性能的精细设计,仍具有十分迫切的研究需求和广泛的应用前景。 本工作以对苯二异氰酸酯(PPDI)与聚四氢呋喃醚二醇(PTMG)为原料,通过调节1,4-丁二醇与三羟甲基丙烷两种扩链交联剂的混合比例,采用预聚体法合成了具备不同交联度的PPDI基聚氨酯弹性体。 其中,傅里叶变换衰减全反射光谱(FTIR-ATR)、广角X射线衍射(WAXD)、差示扫描量热仪(DSC)等表征结果表明,聚氨酯弹性体中硬段和软段的结晶度随交联度的提升均呈下降趋势。 同时,力学测试表明,材料的弹性模量随之降低,而PPDI基聚氨酯弹性体摩擦系数则明显增大。 此外,滞后回环曲线表明,交联度的改变影响了PPDI基聚氨酯弹性体的阻尼特性,而聚氨酯弹性体阻尼的差异在其摩擦性能对速率的依赖关系中则有所体现。 本工作由此提出,利用不同交联度下PPDI基聚氨酯中软硬段结晶度的变化,在对材料弹性模量和损耗模量进行可控调节的同时,能够实现对其摩擦性能的改变,为PPDI基聚氨酯弹性体的摩擦性能调控提供了一种简单有效的途径。