基于棒状介孔SiO_2剪切增稠流体的流变行为

以三嵌段共聚物聚氧乙烯-聚氧丙烯-聚氧乙烯(PEO-PPO-PEO,P123)为模板剂,采用溶胶-凝胶法合成了介孔SiO_2-P123复合物,经煅烧除去P123得到不同长径比的棒状介孔SiO_2粒子,将其分散于聚乙二醇(PEG)中制成剪切增稠流体(STF),利用旋转流变仪对STF的流变性能进行了表征。结果表明:在稳态条件下,STF的剪切增稠效应随介孔SiO_2质量分数的增加而增强,随介孔SiO_2粒子长径比的增加而减弱;在动态条件下,STF的剪切增稠效应随介孔SiO_2质量分数的增加而减弱,随介孔SiO_2粒子长径比的增加而增强。     

高分子溶液剪切增稠行为、机理及应用

综述了具有剪切增稠性质的高分子溶液及其流变行为,分析了高分子溶液剪切增稠的机理,讨论了高分子浓度、分子量和高分子组成等对剪切增稠高分子溶液流变行为的影响,最后介绍了高分子剪切增稠体系在石油开采、抗冲减振及日用化工等领域的应用。     

新型季磷离子液体气相色谱柱的制备及应用

选择季磷型离子液体为气相色谱固定相,采用静态法将其涂渍于纳米级SiO2预处理的毛细管内壁上制备成毛细管气相色谱柱.考察了此固定相的基本色谱性能和极性,并详细研究了其对多种化合物的分离性能和保留特点.研究表明,此该离子液体色谱柱的柱效为1381 plates/m,极性为559.6,与商品化的聚乙二醇(PEG20M)和硝基对苯二甲酸改性的聚乙二醇(FFAP)柱的极性相近.此固定相对给质子体化合物的保留作用明显强于PEG20M,并且其对芳香化合物的间位和对位异构体的分离选择性明显优于自制的PEG20M.此固定相对芳香位置异构体、烷烃、多环芳烃、氯苯、醇类等均具有较好的分离效果.     

SiO2/PEG分散体系动态剪切流变行为

在动态应变条件下, SiO2/PEG200(聚乙二醇, 平均分子量为200)分散体系出现了剪切增稠现象. 剪切流变实验表明, 在两种情况下都出现了剪切增稠: 一种是在不同的恒定频率下应变扫描, 在临界应力γc出现的剪切增稠; 另一种是恒定的应变(γ0=500%)条件下频率扫描, 在临界频率棕c抑10 rad·s-1出现的剪切增稠. 在不同的恒定频率应变扫描条件下, 实验研究了储能模量(G’)和耗能模量(G’’)与应变的关系, 同时初步探讨了应变与不同恒定频率的函数关系. 在线性粘弹性区域内, G’和G’’满足G’∝ω0.57和G’’∝ω0.7指数关系. 在恒定的应变条件下, 发现模量和复数粘度与扫描频率具有强烈的依赖关系, 这些现象可以定性地通过“粒子簇”理论来解释.“粒子簇”理论认为这种剪切增稠的发生是由于形成了亚稳定、流动所导致的“粒子簇”, 使得粘度上升.     

低固相含量SiO2分散体系流变性研究

以甘油(GL)和聚乙二醇(PEG)为分散介质, 研究了低体积分数(Φ＜8%)的SiO₂分散体系的稳态和动态的流变性能, 发现体系都具有可逆的剪切变稀和剪切增稠现象. 在剪切速率大于临界剪切速率(γ^_.＞γ_^.c)时, 体系具有明显的剪切增稠现象, 而当γ^_.＜γ_^.c, GL体系只有轻微的剪切变稀现象, PEG体系剪切变稀现象却很明显. 在动态试验中考察了模量以及损耗角正切tg δ随剪切应力(σ)的变化. 在所研究的应力范围内, 体系中耗能模量G"都大于储能模量G', tg δ大于1, 体系主要表现为粘性. 用“粒子簇”生成机理能较好地解释这种剪切变稀和剪切增稠现象, 即剪切变稀是由于连续的空间网络结构被破坏, PEG体系剪切变稀现象较GL体系明显应该与PEG高分子链的松弛以及体系中较少的氢键有关; 剪切增稠是由于粒子簇的生成引起的.     

咪唑螯合硼离子液体的合成、表征及摩擦学性能

以一类环境友好的螯合硼离子液体为研究对象,合成了4种具有不同烷基直链阳离子中心的螯合硼离子液体C_nMImBScB(n=2,4,6,8);通过核磁共振波谱(NMR)、电耦合等离子体发射光谱(ICP-OES)、热重分析(TGA)和差示扫描量热分析(DSC)等方法对4种螯合硼离子液体进行了结构分析、硼含量测定和热稳定性分析.以聚乙二醇200(PEG200)作为基础油样品,C_nMImBScB(n=2,4,6,8)作为添加剂,采用四球摩擦磨损试验机、扫描电子显微镜(SEM)和能量色散X射线光谱(EDX)分别对油样的减摩抗磨性能、磨斑形貌和磨斑表面元素分布进行了分析和表征.结果表明,C_nMImBScB(n=2,4,6,8)可作为在较宽温度范围内使用的润滑油添加剂,离子液体的低浓度(质量分数1%~2%)添加使PEG200的摩擦性能得到大幅度提高,摩擦系数最大降低58.46%,磨斑直径最大降低20.5%;硼元素沉积到表面参与润滑膜的成膜,磨斑表面碳元素含量的增加也有助于摩擦性能的提高.     

电流变液体的研究进展

电流变液体自从20世纪40年代首次发现以来,由于其广泛的工程应用前景以及潜在的巨大经济和社会效益,已经成为众多研究领域的一个热点.本文综述了电流变液体的组成、电流变材料的研究进展、影响电流变效应的主要因素以及电流变液体研究的应用进展.     

PVA接枝离子液体聚合物电解质的制备及性能!

以聚乙烯醇(PVA)、N-乙烯基咪唑(VyIm)和四氟硼酸(HBF4)为自由基接枝共聚反应的主要原料,合成了含离子液体结构的聚乙烯醇接枝N-乙烯基咪唑四氟硼酸盐(PVA-g-VyImBF4),并引入磷钨酸(PTA)和聚乙二醇(400)咪唑四氟硼酸盐离子液体(PEG400IMBF4)提高了聚合物的实用性能.采用溶液浇铸法制备了聚乙烯醇接枝N-乙烯基咪唑四氟硼酸盐/磷钨酸/离子液体聚合物电解质复合膜(PVA-g-VyImBF4/PTA/PEG400IMBF4).利用傅里叶红外光谱(FTIR)、差示扫描量热仪(DSC)、热重分析(TGA)、扫描电子显微镜(SEM)、交流阻抗及循环伏安等测试方法对聚合物电解质进行了表征.结果表明,当m(PVA-g-VyImBF4)∶m(PTA)∶m(PEG400IMBF4)=4∶2∶1.8时,所制备的聚合物电解质的室温电导率可达到3.267×10-3S/cm;电化学稳定窗口为4.4 V,具有良好的热稳定性和优良的实用性能.     

二氧化硅分散体系在应力剪切过程中粘弹性及能耗研究

通过动态应力剪切研究了以乙二醇、丙二醇和丁二醇为分散介质的雾化二氧化硅分散体系的粘弹性以及能耗. 研究发现, 随着应力的增大, 体系都经历了线性粘弹区、剪切变稀区以及剪切增稠区. 在线性粘弹区, 储能模量(G′)、耗能模量(G′′)随着应力(σ)的增大保持不变；在剪切变稀区, G′随着σ的增大而减小, 且乙二醇、丙二醇、丁二醇分散体系的减小幅度依次递减, 而G′′基本保持不变；在剪切增稠区, G′、G′′都随着σ的增大而增大. 在所研究的应力范围内, G′′都大于G′, 体系主要体现粘性, 消耗能量为主. 同时还发现在低剪切应力区, 体系所消耗的能量(Ed)都随着最大应变(γ0)成二次方关系增长, 而在剪切增稠区, 当n=2.79、4.93、4.88时, EG/SiO2、PG/SiO2、BG/SiO2的Ed分别随γ0以指数关系增长.     

含[AMIM]BF4的聚甲基丙烯酸甲酯基凝胶聚合物电解质的制备与改性

用两步法合成了离子液体1-烯丙基-3-甲基咪唑四氟硼酸盐（[AMIM]BF4）,将聚甲基丙烯酸甲酯(PMMA)引入离子液体[AMIM]BF4中,制备出含离子液体[AMIM]BF4的新型凝胶聚合物电解质,采用非质子溶剂、纳米SiO2等对其进行了改性。 用FT-IR、交流阻抗（AC）、TG、SEM等测试技术对其结构和性能进行了表征。 结果表明,非质子溶剂碳酸丙烯酯、碳酸二甲酯和纳米SiO2的加入使聚合物电解质的室温离子电导率增大,达5.25×10-3 S/cm;电导率与温度的关系符合Arrhenius方程;几种凝胶聚合物电解质的热分解温度均高于300 ℃,显示出良好的热稳定性。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.