High oxidation state transition metal perfluoroglutarates

The reaction of bifunctional perfluorinated acid anhydrides with CrO₃, K₂CrO₄, and Na₂MoO₄ results in the formation of new high oxidation state transition metal perfluoroglutarates.     

Spectroscopic evidence for the formation of a four-coordinate Co2+ cobalamin species upon binding to the human ATP:cobalamin adenosyltransferase

The human adenosyltransferase hATR converts exogenous cobalamin into coenzyme B12 by transferring the adenosyl group from cosubstrate ATP to a transiently formed Co1+cobalamin (Co1+Cbl) species. A particularly puzzling aspect of hATR function is that the midpoint potential for Co2+Cbl --> Co1+Cbl reduction is below that of readily available biological reductants. Our magnetic circular dichroism and electron paramagnetic resonance spectroscopic studies reported here reveal that, in the absence of ATP, the interaction between Co2+Cbl and hATR promotes partial conversion of the cofactor to its "base-off" form in which a water molecule occupies the lower axial position. This interaction becomes much stronger in the presence of ATP, leading to the formation of an unprecedented Co2+Cbl species with spectroscopic signatures consistent with an essentially four-coordinate, square-planar Co2+ center. This unusual Co2+Cbl coordination is expected to raise the Co2+/1+ reduction potential well into the physiological range.     

Self-exchange electron transfer in high oxidation state non-oxo metal complexes: amavadin

The electron transfer self-exchange rate constant between the oxidized and reduced forms of amavadin equals approximately 1 x 10(5) dm3 mol(-1) s(-1) at 25 degrees C and represents the first unambiguous example for a vanadium(IV/V) couple.     

Investigating the role of metal oxidation state on the degradation behaviour of LDPE

Transition metal stearates have been reported to act as effective pro-oxidants for polyethylene, even at trace concentrations. This study is an attempt to investigate the effect of the oxidation state of a metal on its pro-oxidant nature. Three metal stearates, namely manganese, iron and cobalt, in their common oxidation states (+2 and +3), were synthesized and their effect on the photo-oxidative and thermo-oxidative degradation of low-density polyethylene (LDPE) films has been investigated. Films of 70 ± 5 μ were prepared by film blowing technique, exposed to xenon arc weatherometer and air oven at 70 °C for extended time periods. The chemical and physical changes induced by this exposure were followed by monitoring the changes in mechanical properties (tensile strength and elongation at break), carbonyl index (CI), molecular weight (viscometry), MFI, density, and thermal properties. The results were analysed to explain the structural and chemical modifications taking place in the polymeric matrix as a result of aging. The studies reveal that the oxidation state of the metal did not affect its ability to initiate and accelerate degradation. The thermo-oxidative degradation in the presence of metal stearate was found to follow the order: cobalt > manganese > iron. However, iron stearate was capable of initiating photo-oxidative degradation to the same extent as cobalt and manganese, in the concentration range investigated. The results indicate that iron is primarily an effective photo-oxidant, while cobalt and manganese can act both as photo-oxidant as well as thermo-oxidant.     

Electrochemistry and spectroelectrochemistry of heterobimetallic porphyrin-corrole dyads. Influence of the spacer, metal ion, and oxidation state on the pyridine binding ability

Combined electrochemical and UV-visible spectroelectrochemical methods were utilized to elucidate the prevailing mechanisms for electroreduction of previously synthesized porphyrin-corrole dyads of the form (PCY)H2Co and (PCY)MClCoCl where M = Fe(III) or Mn(III), PC = porphyrin-corrole, and Y is a bridging group, either biphenylenyl (B), 9,9-dimethylxanthenyl (X), anthracenyl (A), or dibenzofuranyl (O). These studies were carried out in pyridine, conditions under which the cobalt(IV) corrole in (PCY)MClCoCl is immediately reduced to its Co(III) form, thus enabling direct comparisons with the free-base porphyrin dyad, (PCY)H2Co(III) under the same solution conditions. The compounds are all reduced in multiple one-electron-transfer steps, the first of which involves the M(III)/M(II) process of the porphyrin in the case of (PCY)MClCoCl and the Co(III)/Co(II) process of the corrole in the case of (PCY)H2Co. Each metal-centered redox reaction may be accompanied by the gain or loss of pyridine axial ligands, with the exact stoichiometry of the exchange process depending upon the specific combination of metal ions in the dyad, their oxidation states, and the particular spacer in the complex. Before this study was started, it was expected that the porphyrin-corrole dyads with the largest spacers, namely, O and A, would readily accommodate the formation of cobalt(III) bis-pyridine adducts because of the larger size of the cavity while dyads with the smallest B spacer would seem to have insufficient room to add even a single pyridine within the cavity, as was structurally seen in the case of (PCB)H2Co(py). This is clearly not the case, as shown in the present study. A reversible Co(III)/Co(II) reaction is seen for (PCB)MnClCoCl at -0.62 V, which when combined with spectroscopic data, leads to the assignment of (PCB)Mn(III)(py)2Co(III)(py) as the species in pyridine. The reduction of (PCB)Mn(III)(py)2Co(III)(py) to (PCB)Mn(II)(py)Co(III)(py) is accompanied on the slower spectroelectrochemical time scale by the appearance of a 603 nm band in the UV-vis spectra and is consistent with the addition of a second pyridine ligand to the Co(III)(py) unit of the dyad as one ligand is lost from the electrogenerated manganese(II) porphyrin, thus maintaining one pyridine ligand within the cavity. A different change in the coordination number is observed in the case of (PCB)FeClCoCl. Here the initial Fe(III) complex can be assigned as (PCB)Fe(III)ClCo(III)(py), which has no pyridine molecule within the cavity and the singly reduced form is characterized as (PCB)Fe(II)(py)2Co(III)(py)2, which contains two pyridine ligands inside the cavity. A following one-electron reduction of the Fe(II)/Co(III) complex then gives [(PCB)Fe(II)(py)2Co(II)]-.     

Redox control of a polymerization catalyst by changing the oxidation state of the metal center

The activity of cerium alkoxide complexes supported by a Schiff base ligand was controlled using redox reagents during the ring-opening polymerization of L-lactide. The rate of L-lactide polymerization was modified by switching in situ between the cerium(III) and cerium(IV) species.     

Protonation of acyl anion equivalents generated from acylphosphonates: nonhydride access to the aldehyde oxidation state from the carboxylic acid oxidation state

Acylphosphonates, which are easily available from carboxylic acids, are potent acyl anion precursors and undergo cyanide ion promoted phosphonate-phosphate rearrangement to provide the corresponding acyl anion equivalents as reactive intermediates. The protonation of these acyl anion equivalents furnished cyanohydrin O-phosphates in good yields. For the high yield formation of cyanohydrin O-phosphates from arylphosphonates THF should be used and from alkylphosphonates DME was used.     

Activation of thiocyanogen and selenocyanogen by low oxidation state transition metal complexes

Thiocyanogen and selenocyanogen react with Ru(CO)₃(PPh₃)₂ to give respectively the complexes Ru(CO)₂(PPh₃)₂(NCS)₂ and Ru(CO)₂(PPh₃)₂(NCSe)₂. (M—NCS and M—SCN represent N- and S-thiocyanato groups, M—NCSe and M—SeCN represent N- and Se-selenocyanato groups respectively, while M—CNS indicates the bridging coordination mode of thiocyanate.) Only the thiocyanogen reacts with Ru₃(CO)₁₂ giving [Ru(CO)₂(CNS)₂]_n, which dissolves in hot coordinating solvents, such as pyridine, to form Ru(CO)₂(py)₂(NCS)₂. Selenocyanogen is less effective than thiocyanogen in the oxidative addition reactions with rhodium(I) and iridium(I) complexes; in fact selenocyanogen does not react with Rh(CO)(PPh₃)₂Cl while with Ir(CO)(PPh₃)₂Cl the former gives Ir(CO)(PPh₃)₂(SeCN)₂Cl by an equilibrium reaction. The coordination number of the metal and the charge on the complex do not change the bonding mode of the thiocyanate and selenocyanate groups in the iridium(III) complexes; in the Ir(PPh₃)₂ClX₂ and [Ir(Ph₂PC₂H₄PPh₂)₂X₂]⁺ (X = SCN and SeCN) complexes the pseudohalogens are S- and Se-bonded.The complexes trans-M(PPh₃)₂(SeCN)₂ (M = Pd, Pt) have been obtained by reacting M(PPh₃)₄ with selenocyanogen.     

Investigation of hydrothermal routes to mixed-metal cerium titanium oxides and metal oxidation state assignment using XANES

The reaction between TiF(3) or TiO(2) and Ce(3+) in sodium hydroxide solutions yields highly crystalline NaCeTi(2)O(6) at room temperature and under mild hydrothermal conditions (T < or = 240 degrees C). There is no evidence for the formation of ternary Ce-Ti-O materials by this method, and the use of bases other than NaOH always produces poorly crystalline materials. The material NaCeTi(2)O(6) has a distorted perovskite structure with sodium and cerium ions randomly occupying the A sites: Pnma, a = 5.4517(8) A, b = 7.7292(6) A, c =5.4573(3) A. XANES spectroscopy at the Ti K edge and Ce L(III) edge, with reference to crystalline model compounds, reveals that cerium is found solely as Ce(III) and titanium as Ti(IV) in NaCeTi(2)O(6). Isomorphous substitution of Ce(3+) by Nd(3+) or Ti(4+) by V(4+) is found to be very facile under hydrothermal conditions (at a temperature of 240 degrees C), by addition of appropriate amounts of metal salts to the hydrothermal reaction mixtures. The series NaCe(1-x)Nd(x)Ti2O6 (0 < or = x < or = 1) and NaCeTi(2-x)V(x)O6 (0 相似文献   

Substrate binding favors enhanced NO binding to P450cam

Ferric cytochrome P450cam from Pseudomonas putida (P450cam) in buffer solution at physiological pH 7.4 reversibly binds NO to yield the nitrosyl complex P450cam(NO). The presence of 1R-camphor affects the dynamics of NO binding to P450cam and enhances the association and dissociation rate constants significantly. In the case of the substrate-free form of P450cam, subconformers are evident and the NO binding kinetics are much slower than in the presence of the substrate. The association and dissociation processes were investigated by both laser flash photolysis and stopped-flow techniques at ambient and high pressure. Large and positive values of S and V observed for NO binding to and release from the substrate-free P450cam complex are consistent with the operation of a limiting dissociative ligand substitution mechanism, where the lability of coordinated water dominates the reactivity of the iron(III)-heme center with NO. In contrast, NO binding to P450cam in the presence of camphor displays negative activation entropy and activation volume values that support a mechanism dominated by a bond formation process. Volume profiles for the binding of NO appear to be a valuable approach to explain the differences observed for P450cam in the absence and presence of the substrate and enable the clarification of the underlying reaction mechanisms at a molecular level. Changes in spin state of the iron center during the binding/release of NO contribute significantly to the observed volume effects. The results are discussed in terms of relevance for the biological function of cytochrome P450 and in context to other investigations of the related reactions between NO and imidazole- and thiolate-ligated iron(III) hemoproteins.     

2 + 3] cycloaddition of nitrones to platinum-bound organonitriles: effect of metal oxidation state and of nitrile substituent

The ligated benzonitriles in the platinum(II) complex [PtCl2(PhCN)2] undergo metal-mediated [2 + 3] cycloaddition with nitrones -ON+(R3)=C(R1)(R2) [R1/R2/R3 = H/Ph/Me, H/p-MeC6H4/Me, H/Ph/CH2Ph] to give delta 4-1,2,4-oxadiazoline complexes, [PtCl2(N=C(Ph)O-N(R3)-C(R1)(R2))2] (2a, 4a, 6a), as a 1:1 mixture of two diastereoisomers, in 60-75% yields, while [PtCl2(MeCN)2] is inactive toward the addition. However, a strong activation of acetonitrile was reached by application of the platinum(IV) complex [PtCl4(MeCN)2] and both [PtCl4(RCN)2] (R = Me, Ph) react smoothly with various nitrones to give [PtCl4(N=C(R)O-N(R3)-C(R1)(R2))2] (1b-6b). The latter were reduced to the corresponding platinum(II) complexes [PtCl2(N=C(R)O-N(R3)-C(R1)(R2))2] (1a-6a) by treatment with PhCH2NHOH, while the reverse reaction, i.e. conversion of 1a-6a to 1b-6b, was achieved by chlorination with Cl2. The diastereoisomers of [PtCl2(N=C(R)O-N(R3)-C(R1)(R2))2] (1a-6a) exhibit different kinetic labilities, and liberation of the delta 4-1,2,4-oxadiazolines by substitution with 1,2-bis(diphenylphosphino)ethane (dppe) in CDCl3 proceeds at different reaction rates to give free N=C(R)O-N(R3)-C(R1)(R2) and [PtCl2(dppe)] in almost quantitative NMR yield. All prepared compounds were characterized by elemental analyses, FAB mass spectrometry, and IR and 1H, 13C(1H), and 195Pt (metal complexes) NMR spectroscopies; X-ray structure determination of the first (delta 4-1,2,4-oxadiazoline)Pt(II) complexes was performed for (S,S)/(R,R)-rac-[PtCl2(N=C(Me)O-N(Me)-C(H)Ph)2] (1a) (a = 9.3562(4), b = 9.8046(3), c = 13.1146(5) A; alpha = 76.155(2), beta = 83.421(2), gamma = 73.285(2) degrees; V = 1117.39(7) A3; triclinic, P1, Z = 2), (R,S)-meso-[PtCl2(N=C(Ph)O-N(Me)-C(H)Ph)2] (2a) (a = 8.9689(9), b = 9.1365(5), c = 10.1846(10) A; alpha = 64.328(6), beta = 72.532(4), gamma = 67.744(6) degrees; V = 686.82(11) A3; triclinic, P1, Z = 1), (S,S)/(R,R)-rac-[PtCl2(N=C(Me)O-N(Me)-C(H)(p-C6H4Me))2] (3a) (a = 11.6378(2), b = 19.0767(7), c = 11.5782(4) A; beta = 111.062(2) degrees; V = 2398.76(13) A3; monoclinic, P2(1)/c, Z = 4), and (S,S)/(R,R)-rac-[PtCl2(N=C(Me)O-N(CH2Ph)-C(H)Ph2] (5a) (a = 10.664(2), b = 10.879(2), c = 14.388(3) A; alpha = 73.11(3), beta = 78.30(3), gamma = 88.88(3) degrees; V = 1562.6(6) A3; triclinic, P1, Z = 2).     

Reaction of nitrobenzene and azobenzene with transition metal compounds in low oxidation state

The reaction of metallocycle cluster compounds M_x?1C₄H₈(M = Ti; V; Cr; Mo; W or Fe) with nitrobenzene yields aniline and azobenzene, while the reaction with azobenzene yields aniline only. By means of mass spctrometry ¹⁵N isotope fractionation in a region where a natural abundance of the nitrogen isotope occurs it was stated that aniline and azobenzene arise independently of each other, and the reaction follows the nitrene mechanism. On the other hand aniline from azobenzene is formed as a result of -NN- cleavage to the multimetallic cluster centre.     

Iodine(III)-mediated preparations of nitrogen-containing sulfur derivatives: dramatic influence of the sulfur oxidation state

Reaction of sulfonamides with iodosobenzene leads to phenyliodinanes. A new catalysis reaction of the decomposition of these products in the presence of sulfoxides that allows the smooth synthesis of sulfoximines has been evidenced and studied: copper(II) salts were used to prepare compounds 4 a-j and 5 b, d, f, j, k from the corresponding, easily prepared, sulfoxides. The reactions proceed with retention of configuration at the sulfur center, and copper(II) triflate is the best candidate for the catalyst for the imination. Switching from sulfonamides to sulfinamides in the preparation of the starting iodinanes completely alters the reaction pathway: iodinanes are no longer accessible, and sulfonimidates 7 a-j are obtained instead. This behavior can be rationalized by the increase in pK(a) brought about by the removal of one oxygen atom from the sulfur center. Sulfonimidates are interesting molecules with varied applications. Optimization of their one-pot synthesis has been achieved by carrying out the reaction in acetonitrile. The stereochemical study has shown that the transformation proceeds with global retention of the configuration at the sulfur center, albeit with erosion of the enantiomeric purity. A model accounting for this outcome is proposed. In addition, the presence of oxidized sulfonamide by-products has been explained, and this latter pathway becomes the sole one when alcohol is replaced by water. Good yields of the oxidized products are obtained.     

DFT calculations of the intermediate and transition state in the oxidation of NO by oxygen in the gas phase

The B3LYP density functional method using the extended basis set 6-311++G(3df) was used to calculate the stationary points along the reaction coordinate 2NO + O₂ → 2NO₂. The results of the calculation were compared with the reported physicochemical characteristics of this reaction. The origin of the barrierless activation of the oxygen molecule and driving force for the spontaneous oxidation of NO were examined.     

Catalytic partial oxidation of methane to synthesis gas over a ruthenium catalyst: the role of the oxidation state

The catalytic partial oxidation of methane to synthesis gas over ruthenium catalysts was investigated by thermogravimetry coupled with infrared spectroscopy (TGA-FTIR) and in situ X-ray absorption spectroscopy (XAS). It was found that the oxidation state of the catalyst influences the product formation. On oxidized ruthenium sites, carbon dioxide was formed. The reduced catalyst yielded carbon monoxide as a product. The influence of the temperature was also investigated. At temperatures below the ignition point of the reaction, the catalyst was in an oxidized state. At temperatures above the ignition point, the catalyst was reduced. This was also confirmed by the in situ XAS spectroscopy. The results indicate that both a direct reaction mechanism as well as a combustion-reforming mechanism can occur. The importance of knowing the oxidation state of the surface is discussed and a method to determine it under reaction conditions is presented.     

Water oxidation by a ruthenium complex with noninnocent quinone ligands: possible formation of an O-O bond at a low oxidation state of the metal

Tanaka and co-workers reported a novel dinuclear Ru complex, [Ru2(OH)2(3,6-Bu2Q)2(btpyan)](SbF6)2 (3,6-Bu2Q = 3,6-di tert-butyl-1,2-benzoquinone, btpyan = 1,8-bis(2,2':6',2'-terpyrid-4'-yl)anthracene), that contains redox active quinone ligands and has an excellent electrocatalytic activity for water oxidation when immobilized on an indium-tin-oxide electrode (Inorg. Chem., 2001, 40, 329-337). The novel features of the dinuclear and related mononuclear Ru species with quinone ligands, and comparison of their properties to those of the Ru analogues with the bpy ligand (bpy = 2,2'-bipyridine) replacing quinone, are summarized here together with new theoretical and experimental results that show striking features for both the dinuclear and mononuclear species. The identity and oxidation state of key mononuclear species, including the previously reported oxyl radical, have been reassigned. Our gas-phase theoretical calculations indicate that the Tanaka Ru-dinuclear catalyst seems to maintain predominantly Ru(II) centers while the quinone ligands and water moiety are involved in redox reactions throughout the entire catalytic cycle for water oxidation. Our theoretical study identifies [Ru2(O2(-))(Q(-1.5))2(btpyan)](0) as a key intermediate and the most reduced catalyst species that is formed by removal of all four protons before four-electron oxidation takes place. While our study toward understanding the complicated electronic and geometric structures of possible intermediates in the catalytic cycle is still in progress, the current status and new directions for kinetic and mechanistic investigations, and key issues and challenges in water oxidation with the Tanaka catalyst (and its analogues with Cl(-) or NO(2-)substituted quinones and a species with a xanthene bridge instead an antheracene) are discussed.