丙烯酰胺-苯乙烯双亲嵌段共聚物水溶液的粘度性能

通过改变丙烯酰胺 (AM)与苯乙烯 (St)两单体的投料比 ,在微乳液介质中制备了分子组成系列变化的丙烯酰胺 苯乙烯双亲嵌段共聚物 (PAM b PSt) ,使用旋转粘度计测定了共聚物水溶液的表观粘度 ,详细考察了共聚物浓度、共聚物链结构、剪切速率、盐度及温度等因素对共聚物水溶液表观粘度的影响规律 .研究结果表明 ,由于PAM b PSt分子链中的PSt疏水嵌段链段之间具有强的疏水缔合作用 ,导致其具有独特的流变性能 .当共聚物水溶液的浓度高于某一临界值后 ,疏水缔合作用以分子间的缔合为主 ,大分子链之间会形成动态物理交联网络 ,增大了流体力学体积 ,使PAM b PSt水溶液可产生良好的增稠性能 ;疏水缔合作用是一吸热过程 ,升高温度有利于分子间的缔合 ,因此PAM b PSt水溶液具有良好的耐温性 ;聚合物水溶液中盐类物质的存在 ,会增强溶剂的极性 ,有利于分子间的缔合 ,使PAM b PSt水溶液具有良好的耐盐性 .     

丙烯酰胺-苯乙烯双亲嵌段共聚物的微结构及水溶液行为

通过改变丙烯酰胺(AM)与苯乙烯(St)的投料比、苯乙烯与表面活性剂的加入量之比及引发剂加入量,在微乳液中制备了分子链微结构系列变化的丙烯酰胺-苯乙烯双亲嵌段共聚物(PAM-b-PSt),用荧光探针法与表面活性测定法详细地研究了共聚物中PSt嵌段长度、含量及分子量等微结构因素对共聚物在水溶液中的疏水缔合性与表面活性的影响.结果表明,当共聚物水溶液的浓度高于临界缔合浓度时,PAM-b-PSt的疏水缔合作用以分子间的缔合为主.若共聚物中PSt嵌段含量及分子链长一定时,随着PSt疏水嵌段长度增长,PAM-b-PSt的疏水缔合性增强,而对共聚物的表面活性影响很小.若共聚物中PSt疏水嵌段长度及分子链长一定时,PAM-b-PSt的疏水缔合性随着PSt嵌段含量的变化而变化,当PSt嵌段含量一定时,使大分子链之间产生最强的疏水缔合作用;而其表面活性则随着PSt嵌段含量的增大而增强.若共聚物中PSt疏水嵌段长度及含量一定时,分子量对其表面活性有较大的影响,分子量越高,表面活性越差;同时,在较稀的溶液浓度范围内,分子量对PAM-b-PSt的疏水缔合性的影响则很小.     

羧甲基纤维素系列高分子表面活性剂的嵌段结构对其形态和性能的影响

采用超声波辐照聚合的羧甲基纤维素 (CMC)系列高分子表面活性剂是由CMC嵌段和含有等长双亲性支链的嵌段构成的共聚物 ,研究结果表明 ,CMC链段保证了共聚物的增粘性能 ,双亲性嵌段提供了共聚物优良的表面活性 ;CMC增粘嵌段与表面活性嵌段作为共聚物的两个嵌段 ,各发挥其作用 ,得到既有增粘性能又有高表面活性的双亲性共聚物 .     

表面活性单体NaAMC14S/丙烯酰胺共聚物的分子链微结构与疏水缔合性

在实施丙烯酰胺型阴离子表面活性单体2-丙烯酰胺基十四烷磺酸钠(NaAMC14S)与丙烯酰胺(AM)水溶液均相共聚合过程中,分别通过改变AM与NaAMC14S的投料比、改变外加电解质NaCl的加入量以及引发剂的用量,制备了分子链微结构系列变化的具有微嵌段结构的共聚物NaAMC14S/AM;采用荧光探针法与表观粘度法研究了共聚物分子链微结构与其疏水缔合性能之间关系,探索了共聚物分子链中疏水微嵌段含量、疏水微嵌段长度及共聚物分子量诸微结构因数对共聚物疏水缔合性的影响.结果表明,共聚物NaAMC14S/AM的疏水缔合性随着疏水微嵌段含量的增加而增强,随着疏水微嵌段长度的增长而增强,当疏水微嵌段含量和嵌段长度一定时,共聚物的疏水缔合性随分子量的增大而增强.     

胶束增溶紫外分光光度法测定水溶性共聚物中苯乙烯的含量

紫外光谱分析表明，乙苯（EB）的吸收光谱与聚苯乙烯（PSt)的吸收光谱十分相似，在最大吸收峰处两者的摩尔吸光系数相当，因此，可将乙苯作为参比物，在十二烷基硫酸钠（SDS）的胶束介质中，测定水溶性丙烯酰胺－苯乙烯嵌段共聚物（PAM－b-PS)中苯乙烯的含量，与元素分析的结果进行了比较表明，以乙苯为参比物的胶束增溶紫外分光光度法可准确地测定水溶性丙烯酰胺－苯乙烯嵌段共聚物中苯乙烯的含量。     

双亲嵌段共聚物PSt-b-PAA在甲苯中的自聚集行为

以α-溴乙苯为引发剂,溴化亚铜为催化剂,2,2'-联吡啶为配体,用原子转移自由基聚合(ATRP)法合成了结构一定的嵌段共聚物聚苯乙烯-b-聚丙烯酸丁酯(PSt-b-PBA).经水解制备了双亲性嵌段共聚物聚苯乙烯-b-聚丙烯酸(PSt-b-PAA);采用单溶剂溶解法配制了PSt-b-PAA在甲苯中的反胶束溶液;以极性荧光化合物N-1-萘乙二胺盐酸盐(NEAH)为极性微区探针,用荧光光谱法并配合透射电镜观察探索了双亲嵌段共聚物PSt-b-PAA在甲苯溶液中的自聚集行为,考察了双亲性嵌段共聚物浓度、链结构及温度等因素对反胶束化行为的影响规律.结果表明,亲水链PAA短而亲油链PSt长的双亲嵌段共聚物PSt-b-PAA,用单溶剂溶解法可使其在甲苯中发生自聚集,形成以亲水段为核,疏水段为壳的星状反胶束结构;反胶束为10-20nm的球形聚集态结构;PSt-b-PAA的自聚集行为及临界胶束浓度与分子链的微结构和温度等因素相关,且随着共聚物浓度的增大,小胶束会逐渐结合形成大的纺垂状聚集体.     

CMC系列高分子表面活性剂的胶束形态

高分子表面活性剂分子量高 ,分子中兼具亲水和疏水链段 ,在选择性溶剂水中同小分子表面活性剂一样 ,可形成疏水链段为核心、亲水链段为外壳的胶束结构 ,但高分子量又使其表现出许多不同于低分子表面活性剂的形态特征 ,如胶束的多种形态、尺寸分布多分散性等等 ,而这些形态特征对高分子表面活性剂的界面活性、增粘、乳化等性能有决定性的影响．结构规整的嵌段或接枝共聚物在选择性溶剂中的分子聚集形态已有研究 ［１,２］,亲水亲油性的高分子表面活性剂在水溶液中由于结构复杂、水溶液中氢键作用及静电作用力等因素造成的困难 ,因而研究较少…     

两亲嵌段共聚物胶束用作医用材料

两亲嵌段共聚物可以在水溶液中自组装形成亲水性链段为外壳、疏水性链段为内核的胶束,这种胶束能够用作药物载体而引起人们极大的关注。本文综述了两亲嵌段共聚物胶束用作医用材料的研究进展,主要内容包括医用两亲嵌段共聚物的种类,胶束化,以及用作诊断试剂载体、药物缓释载体、靶向载体等。两亲嵌段共聚物胶束用作磁共振造影剂载体有利于肿瘤的诊断,用作药物缓释载体可以有效增溶难溶性抗肿瘤药物,延长药物在体内的血液循环时间。此外,通过对胶束表面进行修饰或者施加外场,还可以实现靶向功能。因此,两亲嵌段共聚物胶束在医用材料领域有着广阔的发展前景。     

微乳液法制备水溶性双亲丙烯酰胺-苯乙烯嵌段共聚物

分别以十二烷基硫酸钠 (SDS)、壬基酚聚氧乙烯醚 (OP 10 )为表面活性剂 ,丙烯酰胺 (AM)的水溶液为连续相 ,苯乙烯 (St)为分散相 ,构成微乳液共聚合体系 ,合成了水溶性双亲嵌段共聚物 ,并通过荧光探针技术、差示扫描量热 (DSC)测试及流变性能的测定表征了共聚物的嵌段性结构 ,用红外光谱 (FTIR)及紫外光谱 (UV)分析了共聚物的化学组成     

在胶束溶液中铈盐引发制备双亲嵌段共聚物PSt-b-PVP及其表征

采用过氧化氢-硫酸亚铁的氧化还原引发体系,首先使苯乙烯(St)在乳液聚合体系中进行均聚合,制得了端羟基聚苯乙烯(PSt-OH),然后将PSt-OH增溶于十二烷基硫酸钠的胶束溶液中,在硫酸铈铵的引发作用下,使水溶液中的N-乙烯基吡咯烷酮(NVP)在PSt-OH端羟基部位发生嵌段共聚合,制得了双亲嵌段共聚物PSt-b-PVP。采用红外光谱(FT-IR)、核磁共振氢谱(1H-NMR)、凝胶渗透色谱(GPC)、差示扫描量热(DSC)等手段对嵌段共聚物的组成与结构进行了表征。结果表明:在Ce(Ⅳ)盐的氧化作用下,增溶于胶束中的端羟基聚苯乙烯端会在端基产生自由基,顺利地实现NVP的嵌段共聚合反应。随着共聚合时间的延长,共聚物PSt-b-PVP大分子链中亲水嵌段PVP的比例不断增大。     

Studies on microstructure and aqueous solution properties of block copolymer of acrylamide-styrene

Three series of block copolymers of acrylamide (AM) and styrene (St) as hydrophobic comonomer with varied microstructures were prepared in microemulsion medium by changing feed ratio of monomers, ratio of St to surfactant, and amount of initiator, respectively. The effects of microstructure factors of the amphiphilic block copolymers PAM-b-PSt on their aqueous solution properties were investigated by fluorescence probe technique and surface tension measurement in detail. The experimental results show that the aqueous solution properties of PAM-b-PSt are strongly dependent on their microstructure factors, such as the length and content of PSt hydrophobic blocks in the copolymers and their molecular weight. It was found that the main microstructure factors which effect the hydrophobic association behavior of the copolymer PAM-b-PSt are the length and content of PSt hydrophobic blocks in the copolymer, whereas the hydrophobic association behavior of the copolymer is not affected nearly so much by molecular weight in more dilute regions. At the same time, it was also found that the main microstructure factors which affect the surface activity of the copolymer are the content of PSt hydrophobic blocks in the copolymer and molecular weight, whereas the length of PSt blocks in copolymer does not affect surface activity of the copolymer nearly so much under fixed content of PSt hydrophobic blocks and molecular weight in the copolymer.     

Surface properties of styrene–ethylene oxide block copolymers

Hydrophobic–hydrophilic block copolymers were prepared by “living” anionic polymerization. They consist of polystyrene and poly(ethylene oxide) blocks, and are soluble in water. Their interfacial properties were investigated, employing aqueous solutions. The block copolymers lowered the surface tension of water in analogy with the low molecular weight surfactants such as sodium lauryl sulfate and heptaethylene oxide n-dodecyl ether. Their aqueous solutions exhibited solubilization properties differing from those of polyethylene glycol. Therefore, it is thought that the polystyrene blocks produce solubilization phenomena. In samples of the same styrene content, the precipitation temperature of a high molecular weight copolymer in water was lower than that of a low molecular weight copolymer at the same concentration in the same solvent. The surface tension and precipitation temperature of aqueous solutions seem to be influenced by molecular weight and composition.     

ABA型两亲嵌段共聚物的合成及表征

以α ,α′ 二溴代二甲苯为引发剂 ,CuBr/2 ,2′ 联吡啶为催化体系 ,制备了双溴端基的分子量分布窄的聚苯乙烯 (MWD =1 18) .再以此作为大分子引发剂 ,实现了甲基丙烯酸对硝基苯酯的原子转移自由基聚合 ,制得了分子量可控且分子量分布窄的ABA型嵌段共聚物 ,再经水解、酸化 ,得到了聚甲基丙烯酸 b 聚苯乙烯 b 聚甲基丙烯酸ABA型两亲嵌段共聚物     

Synthesis of amphiphilic block copolymers with well‐defined glycopolymer segment by atom transfer radical polymerization

AB block copolymers of 2‐(2′,3′,4′,6′‐tetra‐O‐acetyl‐β‐D‐glucopyranosyloxy)ethyl acrylate (AcGEA) with styrene (St) have been synthesized by atom transfer radical polymerization using well‐defined bromo‐terminated polystyrene as a macroinitiator. An O‐deacetylation of the precursor copolymers affords amphiphilic block copolymers, PSt‐b‐PGEA, with well‐defined glycopolymer segments and narrow molecular weight distributions (M_w/M_n < 1.4). The examination of the aqueous solution of these amphiphilic block copolymers revealed the formation of ordered aggregates.     

Improving mechanical properties and chemical resistance of ink‐jet printer color filter by using diblock polymeric dispersants

The diblock copolymers of polystyrene and poly(tert‐butyl acrylate) (PSt‐b‐PtBA) with various molecular weights and hydrophobic/hydrophilic (styrene/acrylic acid) chain length were prepared by atom transfer radical polymerization (ATRP). Selective hydrolysis of the diblock copolymers (PSt‐b‐PtBA) resulted in amphiphilic block copolymers of polystyrene and poly(acrylic acid) (PSt‐b‐PAA). The amphiphilic block copolymers of PSt‐b‐PAA with average molecular weight (M_n) <7500 were proved to be critical in dispersing the pigments of UV curable ink‐jet inks for manufacturing the color filter. Incorporating DB2 diblock copolymer dispersants with styrene/acrylic acid ratio at 1.5 allowed more UV curable compositions in the red and blue inks without deteriorating pigment dispersing stability and jetting properties of the ink‐jet inks. The ink drops can be precisely ejected into the tiny color area. Better properties of the cured red stripe such as nanoindentation hardness and chemical resistance were found. The competing absorption of UV light by the blue pigment hindered the through cure of monomers near the interface between glass substrate and the blue stripe. This leads to lower hardness and poor chemical resistance of the UV cured blue stripe. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3337–3353, 2005     

Direct synthesis of amphiphilic block copolymers, consisting of poly(methyl methacrylate) and poly(sodium styrene sulfonate) blocks through atom transfer radical polymerization

Amphiphilic block copolymers of methyl methacrylate (MMA) and sodium styrene sulfonate (SSNa) were successfully synthesized via direct atom transfer radical polymerization (ATRP) of SSNa. First, poly(sodium styrene sulfonate) (PSSNa) or poly(methyl methacrylate) (PMMA) macroinitiators were prepared using proper ATRP systems for each case. In some cases, functional initiators, which allow further reactions, were used. The macroinitiators were characterized and further used to synthesize PSSNa/PMMA block copolymers, by using proper solvent combinations, such as N,N-dimethylformamide/water or methanol/water at appropriate volume ratios, in order to ensure solubility of the synthesized amphiphilic copolymers. The molecular weight of the copolymers was determined by gel permeation chromatography, using water as eluent. By using a combination of analytical techniques like ¹H NMR, FTIR and thermogravimetry, the chemical structure and the actual copolymer composition were determined. Since, the block copolymers were soluble in water, forming hydrophilic/hydrophobic domains in aqueous solution, their micellization behavior was further studied by pyrene fluorescence probing.     

Synthesis and characterization of amphiphilic diblock copolymers of methyl tri(ethylene glycol) vinyl ether and isobutyl vinyl ether

Water-soluble diblock copolymers of methyl tri(ethylene glycol) vinyl ether (hydrophilic block) and isobutyl vinyl ether (hydrophobic block) of different molecular weights and composition were synthesized by living cationic polymerization. The molecular weight and comonomer composition of these copolymers were determined by GPC and ¹H NMR spectroscopy, respectively. Aqueous solutions of the copolymers were characterized in terms of their micellar behavior using dynamic light scattering, aqueous GPC, and dye solubilization. All the copolymers formed aggregates with the exception of a diblock copolymer with only two hydrophobic monomer units. The micellar hydrodynamic size scaled with the 0.61 power of the number of hydrophobic units, in good agreement with a theoretical exponent of 0.73. An increase in the length of the hydrophobic block at constant hydrophilic block length or an increase in the overall polymer size at constant block length ratio both resulted in lower critical micelle concentrations (cmcs). The cloud points of 1% w/w aqueous solutions of the polymers were determined by turbidimetry. An increase in the length of the hydrophobic block at constant hydrophilic block length caused a decrease in the cloud points of the copolymers. However, an increase in the overall polymer size at constant block length ratio led to an increase in the cloud point. © 1996 John Wiley & Sons, Inc.     

Poly(sodium styrene sulfonate)-b-poly(methyl methacrylate) diblock copolymers through direct atom transfer radical polymerization: Influence of hydrophilic–hydrophobic balance on self-organization in aqueous solution

A series of poly(sodium styrene sulfonate)-b-poly(methyl methacrylate), PSSNa-b-PMMA, amphiphilic diblock copolymers have been synthesized through atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in N,N-dimethylformamide/water mixtures, starting from a PSSNa macroinitiator. The kinetics of the polymerization was followed by ¹H NMR, while the chemical composition of the copolymers was verified by a variety of techniques, such as ¹H NMR, FTIR and TGA. The MMA content of the copolymers ranges from 0 up to 60 mol%, while the number–average molecular weight of the PSSNa macroinitiator was 9000 g/mol. The self-association of the diblock copolymers in aqueous solution was compared to the respective behavior of similar random P(SSNa-co-MMA) copolymers through optical density measurements, pyrene fluorescence probing, dynamic light scattering and surface tension measurements. It is shown that the diblock copolymers form micellar structures in water, characterized by an increasing hydrophobic character and a decreasing size as the length of the PMMA block increases. These micelle-like structures turn from surface inactive to surface active as the length of the PMMA block increases. Moreover, contrary to the MMA-rich random copolymers, the respective diblock copolymers form water insoluble polymer/surfactant complexes with cationic surfactants such as hexadecyltrimethyl ammonium bromide (HTAB), leading to materials with antimicrobial activity.