Improved molecular rectification from self-assembled monolayers of a sterically hindered dye

Self-assembled monolayers (SAMs) formed from the reaction of 1-(10-acetylsulfanyldecyl)-4-[2-(4-dimethylaminonaphthalen-1-yl)-vinyl]-quinolinium iodide (1a) and gold-coated substrates exhibit asymmetric current-voltage (I-V) characteristics with a rectification ratio of 50-150 at +/-1 V. It is the highest to date for a molecular diode, and the improved behavior may be assigned in part to the controlled alignment of the donor-(pi-bridge)-acceptor moieties and in part to steric hindrance, which imposes a nonplanar structure and effectively isolates the molecular orbitals of the donor and acceptor end groups. The molecular origin of the rectification is verified by its suppression upon exposure to HCl vapor, which protonates the dimethylamino group and inhibits the electron-donating properties, with restoration upon exposure to NH3. It is also established by a reduced rectification ratio of ca. 2 at +/-1 V when the cationic D-pi-A+ moieties adopt an antiparallel arrangement in self-assembled films of the derivative, bis-[1-(10-decyl)-4-[2-(4-dimethylaminonaphthalen-1-yl)-vinyl]-quinolinium]-disulfide diiodide (1b), which adsorbs via one of its terminal donors without rupture of the sulfur-sulfur bond: Au/D-pi-A+-C10H20-S-S-C10H20-+A-pi-D (I-)2.     

Dianions of 7,7,8,8-tetracyano-p-quinodimethane and perfluorinated tetracyanoquinodimethane: information on excited states from lifetime measurements in an electrostatic storage ring and optical absorption spectroscopy

We have developed an experimental technique that allows us to study the physics of short lived molecular dianions in the gas phase. It is based on the formation of monoanions via electrospray ionization, acceleration of these ions to keV energies, and subsequent electron capture in a sodium vapor cell. The dianions are stored in an electrostatic ion storage ring in which they circulate with revolution times on the order of 100 micros. This enables lifetime studies in a time regime covering five orders of magnitude, 10(-5)-1 s. We have produced dianions of 7,7,8,8-tetracyano-p-quinodimethane and 2,3,5,6-tetrafluoro-7,7,8,8-tetracyano-p-quinodimethane (TCNQ-F(4)) and measured their lifetimes with respect to electron autodetachment. Our data indicate that most of the dianions were initially formed in electronically excited states in the electron transfer process. Two levels of excitation were identified by spectroscopy on the dianion of TCNQ-F(4), and the absorption spectrum was compared with spectra obtained from spectroelectrochemistry of TCNQ-F(4) in acetonitrile solution.     

Reaction of 1,8-diaminonaphthalene with some selected π-acceptors; prospective optically active non-linear cyanovinylated naphthalenes as well as synthesis of novel perimidin and pleiadene derivatives

Reactions of 1,8-diaminonaphthalene with some selected π-acceptors are reported herein. The reaction of the 1,8-diaminonaphthalene with 1,1,2,2-tetracyanoethylene (TCNE) and 7,7′,8,8′-tetracyanoquinodimethane (TCNQ), via different modes of cyanovinylation, yielded (2E)-2,3-bis-(8-aminonaphthalen-1-ylamino)-but-2-enedinitrile and 2-[4-(1H,3H-perimidin-2-ylidene)cyclohexa-2,5-dienylidene]malononitrile, respectively. On the other site, the reaction of the target molecule with 2-dicyanomethyleneindane-1,3-dione (CNIND), 2-(2,4,7-trinitro-9H-fluoren-9-ylidene)propane-dicarbonitrile (DTF) and 2,3-dichloro-4,5-dicyano(2,3,4,5-tetrachloro)-1,4-benzoquinones (DDQ and CHL-p) afforded perimidin and pleiadene derivatives.     

Bis(tetrathiafulvalene)-calix[2]pyrrole[2]- thiophene and its complexation with TCNQ

The synthesis of a rare example of a calix[2]pyrrole[2]thiophene derivative incorporating two tetrathiafulvalene units is described along with its X-ray crystal structure. Complexation studies between the bis(tetrathiafulvalene)-calix[2]pyrrole[2]thiophene and 7,7,8,8-tetracyano-p-quinodimethane (TCNQ) were carried out in solution using absorption and ESR spectroscopies as well as in the solid state using X-ray crystallography and IR spectroscopy.     

Molecular rectification: self-assembled monolayers in which donor-(pi-bridge)-acceptor moieties are centrally located and symmetrically coupled to both gold electrodes

Self-assembled monolayers (SAMs) obtained from 1-(10-acetylsulfanyldecyl)-4-[2-(4-dimethylaminophenyl)vinyl]quinolinium iodide exhibit asymmetric current-voltage (I-V) characteristics. The rectification may be reversibly switched: it is suppressed when the film is exposed to HCl vapor, the intramolecular charge-transfer axis being inhibited by protonation, but restored when exposed to NH(3). The behavior is intrinsic to the donor-(pi-bridge)-acceptor moiety, and ambiguity in the assignment has been excluded by matching the alkyl tails on the substrate and contacting STM tip to locate the chromophore midway between the electrodes: Au-S-C(10)H(21)//D-pi-A-C(10)H(20)-S-Au. Films contacted by gold tips exhibit rectification ratios of ca. 18 at +/-1 V, whereas those contacted by pentanethiolate (Au-S-C(5)H(11))- and decanethiolate (Au-S-C(10)H(21))-coated tips have corresponding ratios of ca. 11 and 5, respectively. The I-V curves are different, but when adjusted for thickness the current versus electric field dependence is indistinguishable. Seven dyes are reported: SAMs with sterically hindered D-pi-A moieties, in which the donor and acceptor are twisted out of plane, exhibit rectification, whereas those that are planar or have a weak donor-acceptor combination do not.     

Preparation and properties of cyclopentadienyl- and pentamethylcyclopentadienyl-titanium(IV) complexes with the C8H4S8 ligand, electrical conductivities of their oxidized species, and X-ray crystal structure of Ti(C5Me5)2(C8H4S8)

Ti(C5H5)2(C8H4S8) (1), Ti(C5Me5)2(C8H4S8) (2), [NMe4][Ti(C5H5)(C8H4S8)2] (3), and [NMe4][Ti(C5Me5)(C8H4S8)2] (4) [C8H4S8(2-) = 2-(4,5-ethylenedithio)-1,3-dithiole-2-ylidene)-1,3-dithiole-4,5- dithiolate(2-)] were prepared by reaction of Ti(C5H5)2Cl2, Ti(C5Me5)2Cl2, Ti(C5H5)Cl3, or Ti(C5Me5)Cl3 with Li2C8H4S8 or [NMe4]2[C8H4S8] in THF. They were oxidized by iodine, the ferrocenium cation, or TCNQ (7,7,8,8-tetracyano-p-quinodimethane) in CH2Cl2 or in acetone to afford one-electron-oxidized and over-one-electron-oxidized species, [Ti(C5H5)2(C8H4S8)].I3, [Ti(C5H5)2(C8H4S8)][PF6], [Ti(C5Me5)2(C8H4S8)].I3, [Ti(C5Me5)2(C8H4S8)][PF6], [Ti(C5H5)(C8H4S8)2].I0.9, [Ti(C5H5)(C8H4S8)2][TCNQ]0.3, [Ti(C5Me5)(C8H4S8)2].I2.4, and [Ti(C5Me5)(C8H4S8)2][TCNQ]0.3, with the C8H4S8 ligand-centered oxidation. They exhibited electrical conductivities of 1.6 x 10(-1) to 7.6 x 10(-4) S cm-1 measured for compacted pellets at room temperature. The crystal structure of 2 was clarified to consist of isolated dimerized units of the molecules through some sulfur-sulfur nonbonded contacts: monoclinic, P2(1)/c, a = 9.534(2) A, b = 18.227(2) A, c = 17.775(2) A, beta = 94.39(1) degrees, Z = 4.     

Controlled alignment of molecular diodes via ionic assembly of cationic donor-(pi-bridge)-acceptor molecules on anionic surfaces

Alignment of cationic donor-(pi-bridge)-acceptor molecules via metathesis with a self-assembled monolayer formed from sodium 3-mercapto-1-propanesulfonate results in ultra-thin rectifying Au-S-(CH2)3SO3-/A+-pi-D structures which exhibit optimum current ratios of 450 at +/-1 V for N-methyl-5-(4-dibutylaminobenzylidene)-5,6,7,8-tetrahydroisoquinolinium.     

Proton transfer and a dielectric phase transition in the molecular conductor (HDABCO+)2(TCNQ)3

One-dimensional dielectric (N.H.N)( infinity ) hydrogen-bonding chains of monoprotonated 1,4-diazabicyclo[2.2.2]octane (HDABCO(+)) were introduced into an electrically conducting 7,7,8,8-tetracyano-p-quinodimethane (TCNQ) salt as the countercation structure. Room-temperature electrical conductivity was approximately 10(-)(3) S cm(-)(1), with a semiconductive behavior. The temperature-dependent dielectric constants of (HDABCO(+))(2)(TCNQ)(3) indicated a dielectric transition at 306 K. A large deuterium isotope effect for the dielectric transition (DeltaT = 70 K) was observed for the deuterated salt, (DDABCO(+))(2)(TCNQ)(3). Thermally activated order/disorder of the protons or deuteriums within the one-dimensional hydrogen-bonding chains of (HDABCO(+))( infinity ) and (DDABCO(+))( infinity ) affected the dielectric responses in the TCNQ-based semiconductors.     

Iron pentacarbonyl as a precursor for molecule-based magnets: formation of Fe[TCNE](2) (T(c) = 100 K) and Fe[TCNQ](2) (T(c) = 35 K) magnets

The reaction of tetracyanoethylene (TCNE) and 7,7,8,8-tetracyano-p-quinodimethane (TCNQ) with Fe(CO)(5) leads to formation of magnetically ordered materials of Fe[TCNE](2) (T(c) = 100 K) and Fe[TCNQ](2) (T(c) = 35 K) composition, respectively. In contrast, the reaction with 1,2-dichloro-5,6-dicyanobenzoquinone (DDQ) leads to a paramagnetic material.     

An ionicity diagram for the family of [{Ru2(CF3CO2)4}2(TCNQR(x))] (TCNQR(x) = R-substituted 7,7,8,8-tetracyano-p-quinodimethane)

A diagram of energies between the HOMO of donor (D) and LUMO of acceptor (A) vs.ΔE(1/2)(DA) (= E(1/2)(D) - E(1/2)(A): E(1/2) = first-redox potential) clearly demonstrates the ionicity in the series of D/A assemblies, [{Ru(2)(CF(3)CO(2))(4)}(2)(TCNQR(x))]·n(solv) (TCNQR(x) = 2,5- or 2,3,5,6-R-substituted 7,7,8,8-tetracyano-p-quinodimethane; R(x) = H(4), F(2), Cl(2), Br(2), F(4), Me(2), (OMe)(2)).     

Synthesis of bis-fused tetrathiafulvalene with mono- and dicarboxylic acids

Bis-fused tetrathiafulvalenes with mono- and dicarboxylic acids, 2-{5-(1,3-dithiol-2-ylidene)-[1,3]dithiolo[4,5-d][1,3]dithiol-2-ylidene}-1,3-dithiole-4-carboxylic acid (1) and 2-{5-(1,3-dithiol-2-ylidene)-[1,3]dithiolo[4,5-d][1,3]dithiol-2-ylidene}-1,3-dithiole-4,5-dicarboxylic acid (2) have been synthesized. The electronic structure of 1 and 2 was examined from their optical absorption spectra and using density-functional calculations.     

Analysis of Bonding between Conjugated Organic Molecules and Noble Metal Surfaces Using Orbital Overlap Populations

The electronic structure of metal-organic interfaces is of paramount importance for the properties of organic electronic and single-molecule devices. Here, we use so-called orbital overlap populations derived from slab-type band-structure calculations to analyze the covalent contribution to the bonding between an adsorbate layer and a metal. Using two prototypical molecules, the strong acceptor 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) on Ag(111) and the strong donor 1H,1'H-[4,4']bipyridinylidene (HV0) on Au(111), we present overlap populations as particularly versatile tools for describing the metal-organic interaction. Going beyond traditional approaches, in which overlap populations are represented in an atomic orbital basis, we also explore the use of a molecular orbital basis to gain significant additional insight. On the basis of the derived quantities, it is possible to identify the parts of the molecules responsible for the bonding and to analyze which of the molecular orbitals and metal bands most strongly contribute to the interaction and where on the energy scale they interact in bonding or antibonding fashion.     

Langmuir-Blodgett films of amphiphilic bis(tetrathiafulvalene) macrocycles with four alkyl chains

Amphiphilic bis(tetrathiafulvalene) [bis(TTF)] macrocycles with four alkyl chains were fabricated as novel electrically active Langmuir-Blodgett (LB) films. Two TTF units were linked via [24]crown-8, [21]crown-7, and [18]crown-6 macrocycles, forming charge-transfer (CT) salts with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyano-p-quinodimethane (F4-TCNQ) at the air-water interface and on solid substrates. The CT salt of the amphiphilic bis(TTF)-macrocycle having a [24]crown-8 ring system formed a uniform surface morphology on mica. Using single-crystal X-ray structural analysis, the layer structure between the hydrophobic chains and the one-dimensional pi-pi stack of the CT salt was confirmed. Our results show that the bis(TTF)-macrocycle was folded at the flexible [24]crown-8 moiety, forming intramolecular pi-pi dimer structures and one-dimensional intermolecular pi-pi stacks with F4-TCNQ dimers. The open-shell electronic structure of the LB films was determined by electronic spectra, electrical conductivity, and electron spin resonance analyses. Asymmetry was introduced into the bis(TTF)-macrocycle by changing the ring size from [24]crown-8 to [21]crown-7. The surface morphology of the CT salts with F4-TCNQ was established as two-dimensional round-shape domains on mica. Further reduction of the macrocyclic ring from [21]crown-7 to [18]crown-6 resulted in a CT salt of the bis(TTF)-macrocycle with F4-TCNQ with a leaf-shape domain morphology and a typical dimension of approximately 1 microm2 on mica. In general, decreasing the macrocyclic ring size from [24]crown-8 to [21]crown-7 or [18]crown-6 affected the inter- and intramolecular interactions and the surface morphologies of LB films.     

Structural,magnetic, and optoelectronic properties of (diimine)(dithiolato)platinum(II) and -palladium(II) complexes and their charge-transfer adducts with nitrile acceptors

Two new diimine dithiolato complexes, (dbbpy)Pt(dmid), 1, and (dbbpy)Pd(dmid), 2, were prepared and characterized (dbbpy = 4,4'-di-tert-butyl-2,2'-bipyridine; dmid = 2-oxo-1,3-dithiole-4,5-dithiolate). Both complexes interact with the nitrile acceptor TCNQ, and 1 also interacts with TCNQF(4) and TCNE (TCNQ = 7,7,8,8-tetracyanoquinodimethane; TCNQF(4) = 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane; TCNE = tetracyanoethylene) to form supramolecular 2:1 charge-transfer solids that stack in the manner -DDADDADDA- (D = electron donor; A = electron acceptor). All compounds have been fully characterized by magnetic, spectroscopic, electrochemical, and single-crystal X-ray crystallographic analyses. Magnetic susceptibility studies of the charge-transfer compounds revealed that the platinum-based complexes exhibit temperature-independent paramagnetism of approximately 10(-3) emu/mol. The donor complexes exhibit continuous absorption bands across the UV/visible and into the NIR region. Upon interaction with the nitrile acceptors, the extinction coefficients of the absorption bands increase and the energies of some d-d transitions in the NIR region change. The donor-acceptor compounds possess desired spectral features for solar cell dyes, but low conversion efficiencies resulted when a representative compound was tested in a TiO(2) solar cell. The results, however, serve to illustrate that the donor-acceptor interactions persist in solution and the adsorption of the dye molecules to the semiconductor surface occurs in the absence of typical anchoring groups. Evaluation of the spectral and electrochemical data for the title compounds and the results of the preliminary solar cell study serve as guides for future research in choosing promising candidates for efficient solar cell dyes.     

Tetranuclear complexes of [Fe(CO)2(C5H5)]+ with TCNX ligands (TCNX=TCNE, TCNQ, TCNB): intramolecular electron transfer alternatives in compounds (mu4-TCNX)[MLn]4

The complexes {(mu4-TCNX)[Fe(CO)2(C5H5)]4}(BF4)4 were prepared as light-sensitive materials from [Fe(CO)2(C5H5) (THF)](BF4) and the corresponding TCNX ligands (TCNE = tetracyanoethene, TCNQ=7,7,8,8-tetracyano-p-quinodimethane, TCNB=1,2,4,5-tetracyanobenzene). Whereas the TCNE and TCNQ complexes are extremely easily reduced species with reduction potentials>+0.3 V vs ferrocenium/ferrocene, the tetranuclear complex of TCNB exhibits a significantly more negative reduction potential at about -1.0 V. Even for the complexes with strongly pi-accepting TCNE and TCNQ, the very positive reduction potentials, the unusually high nitrile stretching frequencies>2235 cm(-1), and the high-energy charge-transfer transitions indicate negligible metal-to-ligand electron transfer in the ground state, corresponding to a largely unperturbed (TCNX degrees)(FeII)4 formulation of oxidation states as caused by orthogonality between the metal-centered HOMO and the pi* LUMO of TCNX. M?ssbauer spectroscopy confirms the low-spin iron(II) state, and DFT calculations suggest coplanar TCNE and TCNQ bridging ligands in the complex tetracations. One-electron reduction to the 3+ forms of the TCNE and TCNQ complexes produces EPR spectra which confirm the predominant ligand character of the then singly occupied MO through isotropic g values slightly below 2, in addition to a negligible g anisotropy of frozen solutions at frequencies up to 285 GHz and also through an unusually well-resolved solution X band EPR spectrum of {(mu4-TCNE)[Fe(CO)2(C5H5)]4}3+ which shows the presence of four equivalent [Fe(CO)2(C5H5)]+ moieties through 57Fe and 13C(CO) hyperfine coupling in nonenriched material. DFT calculations reproduce the experimental EPR data. A survey of discrete TCNE and TCNQ complexes [(mu4-TCNX)(MLn)4] exhibits a dichotomy between the systems {(mu4-TCNX)[Fe(CO)2(C5H5)]4}4+ and {(mu4-TCNQ)[Re(CO)3(bpy)]4}4+ with their negligible metal-to-ligand electron transfer and several other compounds of TCNE or TCNQ with Mn, Ru, Os, or Cu complex fragments which display evidence for a strong such interaction, i.e., an appreciable value delta in the formulation {(mu4-TCNXdelta-)[Mx+delta/4Ln]4}. Irreversibility of the first reduction of {(mu4-TCNB)[Fe(CO)2(C5H5)]4}(BF4)4 precluded spectroelectrochemical studies; however, the high-energy CN stretching frequencies and charge transfer absorptions of that TCNB analogue also confirm the exceptional position of the complexes {(mu4-TCNX)[Fe(CO)2(C5H5)]4}(BF4)4.     

New strong organic acceptors by cycloaddition of TCNE and TCNQ to donor-substituted cyanoalkynes

Donor-substituted 1,1,2,4,4-pentacyanobuta-1,3-dienes and a cyclohexa-2,5-diene-1,4-diylidene-expanded derivative were prepared by a [2 + 2] cycloaddition of tetracyanoethene (TCNE) or 7,7,8,8-tetracyanoquinodimethane (TCNQ) to anilino-substituted cyanoalkynes, followed by retro-electrocyclisation; they feature intense bathochromically-shifted intramolecular charge-transfer bands and undergo their first one-electron reductions at potentials similar to those reported for TCNE and TCNQ.     

Ring-opening polymerization of coordination complexes: silver(I) complexes with bis(amidopyridine) ligands derived from thiophene

The thiophene-based bis(N-methylamido-pyridine) ligand SC4H2-2,5-{C(=O)N(Me)-4-C5H4N}2 reacts with silver(I) salts AgX to give 1 : 1 complexes, which are characterized in the solid state as the macrocyclic complexes [Ag(2){SC4H2-2,5-(CONMe-4-C5H4N)2}2][X]2, which have the cis conformation of the C(=O)N(Me) group, when X = CF3CO2, NO3, or CF3SO3 but as the polymeric complex [Ag(n){SC4H2-2,5-(CONMe-4-C5H4N)2}n][X]n, with the unusual trans conformation of the C(=O)N(Me) group, when X = PF6. The bis(amido-pyridine) ligand SC4H2-2,5-{C(=O)NHCH2-3-C5H4N}2 reacts with silver(I) trifluoroacetate to give the polymeric complex [Ag(n){SC4H2-2,5-(CONHCH2-3-C5H4N)2}n][X]n, X = CF3CO2. The macrocyclic complexes contain transannular argentophilic secondary bonds. The polymers self assemble into sheet structures through interchain C=O...Ag and S...Ag bonds in [Ag(n){SC4H2-2,5-(CONMe-4-C5H4N)2}n][PF6]n and through Ag...Ag, C=O...Ag and Ag...O(trifluoroacetate)...HN secondary bonds in [Ag(n){SC4H2-2,5-(CONHCH2-3-C5H4N)2}n][CF3CO2]n.     

A DFT study on pyridine-derived N-heterocyclic carbenes

To appreciate the chemistry of N-heterocyclic carbenes (NHCs), eight carbenic tautomers of pyridine (azacyclohexadienylidenes) are studied at B3LYP/AUG-cc-pVTZ//B3LYP/6-31+G^∗ and B3LYP/6-311++G^∗∗//B3LYP/6-31+G^∗ levels of theory. Various thermodynamic parameters are calculated for these minima, along with a kinetic focus on carbene-pyridine tautomerization. Appropriate isodesmic reactions show stabilization energies of 2-azacyclohexa-3,5-dienylidene (1) and 4-azacyclohexa-2,5-dienylidene (6) as 119.4 and 104.1 kcal/mol, rather close to that of the synthesized 1,3-dimethylimidazol-2-ylidene (129.2 kcal/mol). Three different mechanisms are suggested for the tautomerizations including: [1,2]-H shift, [1,4]-H shift, and three sequential [1,2]-H shifts. The calculated energy barrier for [1,2]-H shift of 1 is 44.6 kcal/mol, while the first [1,2]-H shift for the proposed sequential mechanism of 6 requires 65.1 kcal/mol. Three preliminary minimum templates are introduced, which may possess the potential of synthetic consideration: 2,6-di(X)-3,5-dichloro-4-azacyclohexa-2,5-dienylidene for X=Mes, t-Bu, and Ad.     

Nickel(II) macrocyclic complexes with long alkyl pendant chain: synthesis,x-ray structure,and anion exchange property in the solid state

A nickel(II) pentaaza macrocyclic complex containing a 1-hexadecyl pendant chain, [Ni(C(25)H(55)N(5))](ClO(4))(2).H(2)O (1), was synthesized by a one-pot metal-template condensation reaction. Crystal data for 1: triclinic, Ponemacr;, a = 8.333(4) A, b = 8.356(3) A, c = 28.374(9) A, alpha = 81.865(19) degrees, beta = 86.242(18) degrees, gamma = 63.871(17) degrees, Z = 2. Solid 1 forms hydrophobic layers that are constructed by the long alkyl chains of the macrocycles. Solid 1 exchanges ClO(4)(-) with NCS(-), PF(6)(-), C(2)O(4)(2-), NO(3)(-), and CF(3)SO(3)(-) that are dissolved in water. From the reaction of [Ni(C(25)H(55)N(5))Cl(2)] with Et(3)NH(TCNQ)(2) in EtOH/DMF/acetone solution, [Ni(C(25)H(55)N(5))(TCNQ)(2)](TCNQ).(CH(3)COCH(3)) (2) (TCNQ = 7,7,8,8-tetracyano-p-quinodimethane) was prepared. Crystal data for 2: triclinic, Ponemacr;, a = 8.459(0) A, b = 13.945 (1) A, c = 26.833(2) A, alpha = 88.744(2) degrees, beta = 84.536(2) degrees, gamma = 80.089(4) degrees, Z = 2. In 2, TCNQ anions coordinate nickel(II) at the axial sites, which form pi-stacked TCNQ(-) dimers to give rise to 1-D chains. The neutral TCNQ molecules are included between the dimerized TCNQ(-) species, which construct a pi-stacked group of six TCNQ units as blocked by the long alkyl chains. Compound 2 is an electric insulator. It shows a weak signal in the EPR spectrum. The magnetic susceptibility data of 2 measured at 5-300 K exhibit a simple paramagnetism at low temperatures (<100 K) but an increase in the magnetic moment at higher temperatures due to the contribution of a thermally accessible triplet state for the antiferromagnetically coupled [TCNQ](2)(2-).     

Coordination networks with fluorinated backbones

Fluorine-containing ligands 2,3,5,6-tetrafluoro-1,4-bis(imidazol-1-yl-methyl)benzene (1) and 2,3,5,6-tetrafluoro-1,4-bis(2-methylimidazol-1-yl-methyl)benzene (2) were prepared and coordinated with AgNO3, Co(ClO4)2 x 6 H2O, and Cd(NO3)2 x 4 H2O, respectively, to form the following structures: 3D channel polymer [Ag2(1)2(NO3)2 x H2O x MeOH]n (3), 2D sheet polymer [Co(1)3(ClO4)2]n (4), 1D chain polymer [Cd(1)3(NO3)2 x 4 H2O]n (5), and a 2D herringbone sheet polymer [Ag(2)NO3 x 1.5 MeOH]n (6). The solid-state crystal structures of 3-6 were studied by single-crystal X-ray crystallography.