High resolution mass spectrometry—I. Some substituted δ-lactones

The mass spectra of some δ-lactones substituted in various positions by methyl groups have been studied both by accurate mass measurements at high resulution and by deuterium labelling. The loss of carbon dioxide has been shown to be important only for a mono-substituted lactone. A fragmentation mode common to all the lactones studied is the elimination of the ring oxygen atom, plus the adjacent carbon atom with its substituents, as a neutral carbonyl molecule such as formaldehyde, acetaldehyde or acetone. Deuterium labelling has uncovered the existence of a rearrangement involving hydrogen transfer in an even-electron ion, and a mechanism involving a six-membered transition state is proposed for this. The bond fissions, common to all the lactones, by which the principal ions in the mass spectra arise, are summarised.     

Photoelectron spectroscopic studies of the adsorption of organic molecules with lone pair orbitals on transition metal surfaces

Ultraviolet and x-ray photoelectron spectroscopy have been employed to investigate the adsorption of methanol, ethanol, diethylether, acetaldehyde, acetone, methyl acetate and methylamine on surfaces of Fe, Ni and Cu. All these molecules adsorb molecularly at low temperatures (≤100 K). Lone pair orbitals of these molecules are stabilized on these metal surfaces (by 0·4–1·0eV) due to molecular chemisorption. The molecules generally undergo transformations as the temperature is raised to 120 K or above. The new species produced seems to depend on the metal surface. Some of the product species identified are methoxy species, formaldehyde and carbon monoxide in the case of methanol and methyl acetate, ethoxy species in the case of ethanol and 2-propanol in the case of acetone. Contribution No. 166 from the Solid State and Structural Chemistry Unit.     

Reaction of acetaldehyde with Ni+: an extended theoretical study of the decarbonylation mechanism of acetaldehyde by first-row transition metal ions

We report herein a theoretical study of the reaction of acetaldehyde with Ni+ as an extension of our two recent papers on the decarbonylation of acetaldehyde by late first-row transition metal ions [Zhao, Zhang, Guo, Wu, Lu Chem. Phys. Lett. 2005, 414, 28; Zhao, Guo, Zhang, Wu, Lu ChemPhysChem 2006, 7, 1345]. Geometries of all the stationary points involved in the reaction have been fully optimized at the B3LYP/6-311+G(2df,2pd) level and the decarbonylation mechanism is analyzed in terms of the topology of potential energy surface. Combining with the previous studies, it is found that for the Cr+, Co+, and 4Fe+ mediated systems decarbonylation of CH3CHO only takes place via C-C activation, and aldehyde C-H activation is unlikely to be important, whereas both C-C and aldehyde C-H activations by Ni+ and 6Fe+ could result in the decarbonylation of CH3CHO, where hydride-containing species M+(H)(CO)(CH3) is found to be a common minimum along the reaction pathways.     

异戊二烯与OH自由基光化学反应的二次有机气溶胶的生成

利用烟雾箱模拟装置,研究了异戊二烯与OH自由基反应的二次有机气溶胶(SOA)的生成.反应中生成的气相产物通过质子转移反应质谱仪(PTR-MS)测定,SOA的浓度及粒径谱分布通过高分辨率粒径谱仪(EEPS3090)测定.研究表明:甲基丙烯醛(MAC)/甲基乙烯基酮(MVK)、乙醛、甲醛、甲醇、甲酸/乙醇、乙醇醛、甲基乙二醛、丙酮/丙醛等为主要气相产物,各组实验中MAC/MVK和乙醛浓度达到最大时,其产率分别介于13.78%～37.72%和5.38%～9.34%(以C计)范围内;SOA生成量及其中值粒径随异戊二烯反应量的增加而增加,气相物质稳定后,SOA产率在5.6%～11.7%范围内,粒径在22～165nm范围内.     

HPLC–MS determination of the oxidation products of the reaction between α- and β-pinene and OH radicals

Biogenic non-methane hydrocarbons such as isoprene, alpha-pinene, and beta-pinene, are emitted by forests in very large quantities. To evaluate the role of alpha- and beta-pinene and their contribution to the global production of trace gases and especially aerosol precursors, a study of the oxidation mechanism of alpha- and beta-pinene with hydroxyl radicals must be conducted.The degradation products of both monoterpenes with hydroxyl radicals were identified and quantified in a fast-flow reactor. The products were collected on a liquid-nitrogen trap coated with a 2,4-DNPH solution to which two internal standards (benzaldehyde-2,4-DNPH and tolualdehyde-2,4-DNPH) had been added. The collection method was based on the in situ conversion of aldehyde and/or ketone compounds to their 2,4-dinitrophenylhydrazone derivatives. The derivatives were analyzed by HPLC-MS using APCI(-). TIC chromatograms and mass spectral data for the various oxidation products are presented.For alpha-pinene, pinonaldehyde is the most important degradation product, with smaller amounts of acetone, formaldehyde, campholenealdehyde, and acetaldehyde. For beta-pinene, nopinone and formaldehyde are the most abundant products, of almost equal importance, whereas acetone and acetaldehyde are minor compounds.     

In situ FTIR study of the adsorption geometry of bisulfate accepted ions on a platinum electrode

It is shown that a better understanding of the geometry of adsorbed bisulfate species on the surface is gained by monitoring simultaneously more than one vibrational mode of the molecule. We propose that in the double layer region the bisulfate ions are adsorbed via an oxygen atom of its SO₃ unit with the Pt-O-S linkage along the surface normal. In the oxide region the bisulfate ions are adsorbed on the oxygen covered surface of the platinum electrode via the hydrogen atom by hydrogen bonding with the hydrogen bond showing a significant tilt (approximately 60° ).     

Methane dissociative adsorption on the Pt(111) surface over the 300-500 K temperature and 1-10 Torr pressure ranges

The dissociative adsorption of methane on the Pt(111) surface has been investigated and characterized over the 1-10 Torr pressure and 300-500 K temperature ranges using sum frequency generation (SFG) vibrational spectroscopy and Auger electron spectroscopy (AES). At a reaction temperature of 300 K and a pressure of 1 Torr, C-H bond dissociation occurs in methane on the Pt(111) surface to produce adsorbed methyl (CH(3)) groups, carbon, and hydrogen. SFG results suggest that C-C coupling occurs at higher reaction temperatures and pressures. At 400 K, methyl groups react with adsorbed C to form ethylidyne (C(2)H(3)), which dehydrogenates at 500 K to form ethynyl (C(2)H) and methylidyne (CH) species, as shown by SFG. By 600 K, all of the ethylidyne has reacted to form the dissociation products ethynyl and methylidyne. Calculated C-H bond dissociation probabilities for methane, determined by carbon deposition measured by AES, are in the 10(-8) range and increase with increasing reaction temperature. A mechanism has been developed and is compared with conclusions from other experimental and theoretical studies using single crystals.     

Photooxidation of acetone on TiO2(110): conversion to acetate via methyl radical ejection

It is generally held that radicals form and participate in heterogeneous photocatalytic processes on oxide surfaces, although understanding the mechanistic origins and fates of such species is difficult. In this study, photodesorption and thermal desorption techniques show that acetone is converted into acetate on the surface of TiO2(110) in a two-step process that involves, first, a thermal reaction between acetone and coadsorbed oxygen to make a surface acetone-oxygen complex, followed second by a photocatalytic reaction that ejects a methyl radical from the surface and converts the acetone-oxygen complex into acetate. Designation of the photodesorption species to methyl radicals was confirmed using isotopically labeled acetone. The yield of photodesorbed methyl radicals correlates well with the amount of acetone depleted and with the yield of acetate left on the surface, both gauged using postirradiation temperature programmed desorption (TPD). The thermal reaction between adsorbed acetone and oxygen to form the acetone-oxygen complex exhibits an approximate activation barrier of about 10 kJ/mol. A prerequisite to this reaction is the presence of surface Ti3+ sites that enable O2 adsorption. Creation of these sites by vacuum reduction of the surface prior to acetone and oxygen coadsorption results in an initial spike in the acetone photooxidation rate, but replenishment of these sites by photolytic means (i.e., by trapping excited electrons at the surface) appears to be a slow step in a sustained reaction. Evidence in this study for the ejection of organic radicals from the surface during photooxidation catalysis on TiO2 provides support for mechanistic pathways that involve both adsorbed and nonadsorbed species.     

Direct analysis of microstructures of alkyl phenol resin using atmospheric pressure chemical ionization-mass spectrometry

Alkyl phenol resin was directly analyzed using atmospheric pressure chemical ionization-mass spectrometry (APCI-MS). Analysis was performed in both positive and negative ion modes, and product ions were only observed in the negative ion mode. By interpreting the m/z values of [M – H]^? ions, the degree of polymerization, the types of linkages and the types of terminals could be determined. The monomer, dimer, trimer, tetramer and pentamer species were observed. The methylene and dimethylene ether linkages were distinguished. For the terminal types, the methylol, o-methylene quinone, hydrogen, and aldehyde were distinguished. Influence of the types of solvents and eluents on the ionization efficiencies were investigated using acetone, chloroform and tetrahydrofuran. Recommendable solvent and eluent system for the analysis of resin using APCI-MS was acetone.     

Selected ion flow tube mass spectrometry of exhaled breath condensate headspace

Collection of exhaled breath condensate (EBC) is a relatively simple noninvasive method of breath analysis; however, no data have been reported that would relate concentration of volatile compounds in EBC to their gaseous concentrations in exhaled air. The aim of the study was to investigate which volatile compounds are present in EBC and how their concentrations relate to results of direct breath analysis. Thus, samples of EBC were collected in a standard way from several subjects and absolute levels of several common volatile breath metabolites (ammonia, acetone, ethanol, methanol, propanol, isoprene, hydrogen cyanide, formaldehyde and acetaldehyde) were then determined in their headspace using selected ion flow tube mass spectrometry (SIFT-MS). Results are compared with those from on-line breath analyses carried out immediately before collecting the EBC samples. It has been demonstrated that SIFT-MS can be used to quantify the concentrations of volatiles in EBC samples and that, for methanol, ammonia, ethanol and acetone, the EBC concentrations correlate with the direct breath levels. However, the EBC concentrations of isoprene, formaldehyde, acetaldehyde, hydrogen cyanide and propanol do not correlate with direct breath measurements. Copyright (c) 2008 John Wiley & Sons, Ltd.     

MNDO study of reaction paths: Hydroboration of carbonyl systems

The hydroboration reactions of acetaldehyde and acetone have been investigated by the MNDO method. The reactions have been shown to be twostep reactions involving an intermediate adduct. This adduct subsequently undergoes hydrogen rearrangement. The hydroboration reactions of acetaldehyde and acetone have been compared with the corresponding reaction of formaldehyde. The charge transfer effects accompanying these reactions have also been discussed.     

不同材料滤嘴对卷烟主流烟气中挥发性羰基化合物截滤性能的研究

吸烟是引起肺癌及相关疾病的主要原因[1]。挥发性羰基化合物(如甲醛、乙醛、丙醛、丙酮、丙烯醛、巴豆醛、丁酮和丁醛)是卷烟主流烟气中含量较高的一类有害成分,含量从几十到几百微克不等[2-3]。这些挥发性羰基化合物特别是甲醛、丙烯醛及巴豆醛具有纤毛毒性,与氰化氢和氨一起,     

Adsorption and conversion of various hydrocarbons on monolithic hydrocarbon adsorber

Adsorption and conversion of various hydrocarbons on monolithic hydrocarbon adsorbers were studied using a new experimental model, temperature-programmed adsorption (TPA). In this study, methyl alcohol, acetone, acetaldehyde, 2,2,4-trimethylpentane, n-octane, and toluene were chosen as model hydrocarbons for cold start of a vehicle. The effect of the hydrocarbon components and oxygen concentration on the TPA curve was investigated. Depending on the presence of O(2), the adsorbed and desorbed amounts of the hydrocarbons were decreased, while the conversion efficiency of the hydrocarbons was increased. In the case of hydrocarbons containing oxygen, the thermal decomposition appeared to be in the order methanol, acetaldehyde, and acetone.     

Hydrogen bond stabilization in 1,3-dimethylimidazolium methyl sulfate and 1-butyl-3-methylimidazolium hexafluorophosphate probed by high pressure: the role of charge-enhanced C-H...O interactions in the room-temperature ionic liquid

The hydrogen bonding structures of room-temperature ionic liquids 1,3-dimethylimidazolium methyl sulfate and 1-butyl-3-methylimidazolium hexafluorophosphate have been studied by infrared spectroscopy. High-pressure infrared spectral profiles and theoretical calculations allow us to make a vibrational assignment of these compounds. The imidazolium C-H bands of 1,3-dimethylimidazolium methyl sulfate display anomalous non-monotonic pressure-induced frequency shifts. This discontinuity in frequency shift is related to enhanced C-H...O hydrogen bonding. This behavior is in contrast with the trend of blue shifts in frequency for the methyl C-H stretching mode at ca. 2960 cm(-1). Our results indicated that the imidazolium C-H groups are more favorable sites for hydrogen bonding than the methyl C-H groups in the pure 1,3-dimethylimidazolium methyl sulfate. Nevertheless, both methyl C-H and imidazolium C-H groups are favorable sites for C-H...O hydrogen bonding in a dilute 1,3-dimethylimidazolium methyl sulfate/D(2)O mixture. Hydrogen bond-like C-H...F interactions were observed between PF(6)(-) and H atoms on the alkyl side chains and imidazolium ring for 1-butyl-3-methylimidazolium hexafluorophosphate.     

FTIR spectroscopy combined with quantum chemical calculations to investigate adsorbed nitrate on aluminium oxide surfaces in the presence and absence of co-adsorbed water

Surface reactions of nitrogen oxides with aluminium oxide particles result in the formation of adsorbed nitrate. Specifically, when alpha-Al(2)O(3) and gamma-Al(2)O(3) particles are exposed to gas-phase NO(2) and HNO(3) adsorbed nitrate forms on the surface. In this study, Fourier transform infrared (FTIR) spectroscopy is combined with quantum chemical calculations to further our understanding of the adsorbed nitrate product on aluminium oxide particle surfaces in the presence and absence of co-adsorbed water at 296 K. FTIR spectra of adsorbed nitrate on alpha-Al(2)O(3) and gamma-Al(2)O(3) particles are interpreted using calculated vibrational frequencies of nitrate coordinated to binuclear Al oxide cluster models. Comparison of the calculated and experimental vibrational frequencies of adsorbed nitrate establishes different modes of coordination (monodentate, bidentate and bridging) of the nitrate ion to the surface in the absence of adsorbed water. In the presence of co-adsorbed water, the nitrate ion becomes fully solvated, as shown by a comparison of the experimental nitrate infrared spectra as a function of relative humidity with the calculated nitrate vibrational frequencies for binuclear Al cluster compounds which contain both coordinated nitrate ions and water molecules. These calculations also suggest that adsorbed water can displace nitrate from direct coordination to the surface, leading to an outer-sphere nitrate adsorption complex as well as an inner-sphere complex. Furthermore, the relative humidity dependence of the spectra suggest that water does not evenly wet the surface even at high relative humidity, as there are open or bare surface sites where nitrate ions are not solvated. Besides adsorbed mondendate, bidendate, bridging and solvated nitrate, the presence of ion bound nitrate ion, partially solvated nitrate, molecular nitric acid, hydronium ion and H(3)O(+):NO(3)(-) ion pairs on the oxide surface are also discussed.     

Ion–molecule reactions of methoxymethyl cations with some organic substrates studied by ion cyclotron resonance spectrometry

The reactions of methoxymethyl cations generated from dimethyl ether with propene, butene-2, vinyl methyl ether, acetaldehyde and acetone have been studied. The collision complexes, generated with the olefines, may eliminate an olefine, a methanol and a formaldehyde molecule as shown by double resonance experiments. From deuterium labelling it is found, that in the cases of propene and butene-2 the elimination of an olefine is accompanied by an extensive H/D interchange in the collision complexes, which has been shown not to occur in the long-lived reactant methoxymethyl cations if the internal energy of the methoxymethyl cations is less than 2.3 eV. The H/D interchange in these collision complexes is reduced in the elimination of methanol and is almost completely suppressed in the elimination of formaldehyde. In reactions with vinyl methyl ether, however, the eliminations of methanol and formaldehyde from the corresponding collision complexes appear to proceed with extensive H/D interchange. These observations point to acyclic collision complexes rather than 4-membered ring complexes. The collision complexes generated with acetaldehyde and acetone decompose by elimination of formaldehyde only. Deuterium labelling has shown that the formaldehyde molecule contains the original methylene group of the reactant methoxymethyl cations. In addition, ¹⁸O labelling in acetone has shown that the original oxygen atom of the methoxymethyl cations is retained completely in the eliminated formaldehyde. These observations exclude any formation of 4-membered ring collision complexes and can only be explained by acyclic complexes. Possible mechanisms of all reactions mentioned are discussed in the light of these results.     

Nature and strength of C-H···O interactions involving formyl hydrogen atoms: computational and experimental studies of small aldehydes

Structural and electronic properties of C-H···O contacts in compounds containing a formyl group are investigated from the perspective of both hydrogen bonding and dipole-dipole interactions, in a systematic and graded approach. The effects of α-substitution and self-association on the nature of the formyl H-atom are studied with the NBO and AIM methodologies. The relative dipole-dipole contributions in formyl C-H···O interactions are obtained for aldehyde dimers. The stabilities and energies of aldehyde clusters (dimer through octamer) have been examined computationally. Such studies have an implication in crystallization mechanisms. Experimental X-ray crystal structures of formaldehyde, acrolein and N-methylformamide have been determined in order to ascertain the role of C-H···O interactions in the crystal packing of formyl compounds.     

CH3O decomposition on PdZn(111), Pd(111), and Cu(111). A theoretical study

Methanol steam re-forming, catalyzed by Pd/ZnO, is a potential hydrogen source for fuel cells, in particular in pollution-free vehicles. To contribute to the understanding of pertinent reaction mechanisms, density functional slab model studies on two competing decomposition pathways of adsorbed methoxide (CH(3)O) have been carried out, namely, dehydrogenation to formaldehyde and C-O bond breaking to methyl. For the (111) surfaces of Pd, Cu, and 1:1 Pd-Zn alloy, adsorption complexes of various reactants, intermediates, transition states, and products relevant for the decomposition processes were computationally characterized. On the surface of Pd-Zn alloy, H and all studied C-bound species were found to prefer sites with a majority of Pd atoms, whereas O-bound congeners tend to be located on sites with a majority of Zn atoms. Compared to Pd(111), the adsorption energy of O-bound species was calculated to be larger on PdZn(111), whereas C-bound moieties were less strongly adsorbed. C-H scission of CH(3)O on various substrates under study was demonstrated to proceed easier than C-O bond breaking. The energy barrier for the dehydrogenation of CH(3)O on PdZn(111) (113 kJ mol(-)(1)) and Cu(111) (112 kJ mol(-)(1)) is about 4 times as high as that on Pd(111), due to the fact that CH(3)O interacts more weakly with Pd than with PdZn and Cu surfaces. Calculated results showed that the decomposition of methoxide to formaldehyde is thermodynamically favored on Pd(111), but it is an endothermic process on PdZn(111) and Cu(111) surfaces.     

碘乙醇在Ni(100)表面的吸附和热分解-碳氢化合物氧化的中间产物：羟乙基和氧金属环

利用热脱附(TPD)实验和X射线光电子能谱(XPS)研究了碘乙醇在Ni(100)表面的吸附和热反应过程. 实验结果表明碘乙醇在100 K时以两种分子的形式吸附在Ni(100)的表面, 即: 以碘原子端吸附在表面或以碘原子端和羟基端同时吸附在表面. 由于两种吸附形式的分子的一致分解和吸附分子的不均匀性, 在140 K引起了较复杂的化学反应, 伴有少量的乙烯和水产生. 碘乙醇在150 K经过C—I键断裂, 有80%碘乙醇生成—O(H)CH2CH2—中间产物, 20%的碘乙醇生成羟乙基中间产物. 羟乙基在160 K的转化过程中包括两个互相竞争的化学反应: 与表面的氢原子进行还原反应生成乙醇, 或失去一个β-H原子生成表面乙烯醇. 另外, 在相同的温度下—O(H)CH2CH2—中间产物经过脱氢反应产生—OCH2CH2—氧金属环. 羟乙基和氧金属环都会发生异构, 分别在210 K和250 K生成乙醛, 这些乙醛一部分从表面脱出, 其余的部分发生分解反应产生氢气、水和一氧化碳. 在实验基础上, 进一步探讨了这种化学过程在催化中的作用和指导意义.     

Polarographische Bestimmung von Spuren von Carbonylverbindungen in organischen Lösungsmitteln

Traces of formaldehyde, acetaldehyde and acetone in organic solvents are determined polarographically as semicarbazones. Solvents miscible with water are measured directly in aqueous buffer solution of semicarbazide, while from those nonmiscible with water the carbonyl compounds are first extracted with a solution of semicarbazide. The polarography of semicarbazones as an analytical method is considerably more sensitive than the direct polarography of aldehydes in a neutral or alkaline medium: in 1 ml samples of solvents, formaldehyde, acetaldehyde and acetone can be determined in concentrations of about 10^?4%. The method also permits the determination of formaldehyde, acetaldehyde and acetone simultaneously.