基于扩展有限元法的裂尖场精度研究

扩展有限元方法基于单元分解的基本思想,通过引入位移加强函数来表征裂纹的不连续性和裂尖的奇异性。在裂尖加强单元与常规单元之间有一层混合单元,当对裂尖特定区域进行加强时,混合单元个数相应增加,混合单元个数与计算精度存在一定联系。本文提出一种正方形裂尖加强区域的选择方式,可得到较单个加强和圆形加强精度更高、更稳定的计算结果。对于不同长度的裂纹,表征裂尖场奇异性所需的裂尖加强范围存在较大差异,以正方形裂尖加强方式进行计算,得到了不同裂纹长度下最优的加强尺寸。     

On some crack problems in anisotropic thermoelasticity

Some basic equations recently derived by Clements are used to consider crack problems in anisotropic thermoelasticity. The problems concern a single crack in an anisotropic material in which the displacement and stress are independent of one Cartesian coordinate. No symmetry elements of the material are assumed and the temperature, displacement and stress fields are determined for an arbitrary distribution of temperature or heat flux over the crack faces.     

Modelling of crack growth under cyclic contact loading

The paper describes a general computational model for modelling of subsurface fatigue crack growth under cyclic contact loading of mechanical elements. The model assumes that the initial fatigue crack develops along the slip line in a single crystal grain at the point of the maximum equivalent stress. The position and magnitude of the maximum equivalent stress are determined with the Finite Element Analysis of the equivalent contact model, which is based on the Hertzian contact conditions with the addition of frictional forces. The Virtual Crack Extension method is then used for simulation of the fatigue crack propagation from the initial to the critical crack length, when the surface material layer breaks away and a pit appears on the surface. The pit shapes and relationships between the stress intensity factor and the crack length are determined for various combinations of contacting surface curvatures and contact loadings. The computational results show that the model reliably simulates the subsurface fatigue crack growth under contact loading and can be used for computational predictions of surface pitting for various contacting mechanical elements.     

模拟裂纹扩展的一种有限元局部动态子划分方法

提出了一种有限元子划分结合子结构的方法来模拟裂纹扩展问题。提出的方法中,将单元分为三类:被裂纹贯穿的单元,包含裂尖的单元和常规单元。对前两类单元进行子划分,每个单元的归类随裂纹的扩展而动态变化。覆盖一条裂纹的前两类单元子划分后构成一个子结构,子结构也是动态的,跟随裂纹的扩展而逐步扩大。本文的方法可以使裂纹沿任意路径扩展而不受初始网格的限制,裂纹扩展后无需对结构整体的网格重划分,结构整体分析的总自由度也不变。用该方法计算无限大平面中心裂纹的应力强度因子,模拟三点弯梁跨中裂纹的扩展,验证了计算精度,并进一步用该方法模拟了非均质材料中裂纹的扩展,考核了对复杂裂纹扩展问题的适用性。     

The fracture mechanics of slit-like cracks in anisotropic elastic media

U method of continuously distributed dislocations, the problem of a slit-like crack in an arbitrarily-anisotropic linear elastic medium stressed uniformly at infinity is formulated and solved. The crack faces may be either freely-slipping or loaded by arbitrary equal and opposite tractions. If there is no net dislocation content in the crack, then the tractions and stress concentrations on the plane of the crack are independent of the elastic constants and the anisotropy; the same is true of the elastic stress intensity factors. The crack extension force depends on anisotropy only through the inverse matrix elements K _mg⁻¹, where [K] is the pre-logarithmic energy factor matrix for a single dislocation parallel to the crack front. Numerical results for crack extension forces are presented for three media of cubic symmetry.     

A different approach for calculation of stress intensity factors in continuous fiber reinforced metal matrix composites

In this paper, a numerical model developed for the analysis of a cylindrical element of matrix containing a single fiber is presented. A ring-shaped crack is assumed at interface of fiber and matrix. Both layers in the model are bonded perfectly with the exception of the crack faces. Contact elements, which have bonded feature, are used between fiber and matrix. Displacement correlation method is used to calculate opening-mode and sliding-mode stress intensity factors. These results obtained from the analysis help to understand the debonding phenomenon between fiber and matrix interface. Effects of the mechanical properties of fiber and matrix on direction of crack propagation are also discussed.     

On the uses of special crack tip elements in numerical rock fracture mechanics

Numerical methods such as boundary element methods are widely used for the stress analysis in solid mechanics. These methods are also used for crack analysis in rock fracture mechanics. There are singularities for the stresses and displacements at the crack tips in fracture mechanics problem, which decrease the accuracy of the numerical results in areas very close to the crack ends. To overcome this, higher order elements and isoperimetric higher order elements have been used. Recently, special crack tip elements have been proposed and used in most of the numerical fracture mechanics models. These elements can drastically increase the accuracy of the results near the crack tips, but in most of the models only one special crack tip element has been used for each crack end. In this study the uses of higher order crack tip elements are discussed and a higher order displacement discontinuity method is used to investigate the effect of these elements on the accuracy of the results in some crack problems. The useful shape functions for two special crack tip elements, are derived and given in the text and appendix for both infinite and semi-infinite plane problems. In this analysis both Mode I and Mode II stress intensity factors are computed . Some example problems are solved and the computed results are compared with the results given in the literature. The numerical results obtained here are in good agreement with those cited in the literature. For the curved crack problem, the strain energy release rate, G can be calculated accurately in the vicinity of the crack tips by using the higher order displacement discontinuity method with a quadratic variation of displacement discontinuity elements and with two special crack tip elements at each crack end.     

Multiscale material modeling and its application to a dynamic crack propagation problem

Here we present a multiscale field theory for modeling and simulation of multi-grain material system which consists of several different kinds of single crystals and a large number of different kinds of discrete atoms. The theoretical construction of the multiscale field theory is briefly introduced. The interatomic forces are used to formulate the governing equations for the system. A compact tension specimen made of magnesium oxide is modeled by discrete atoms in front of the crack tip and finite elements in the far field. Results showing crack propagation through the atomic region are presented.     

Fatigue growth modeling of cracks emanating from a circular hole in infinite plate

This paper presents a numerical approach of fatigue growth analysis of cracks emanating from a hole in infinite elastic plate subjected to remote loads. It involves a generation of Bueckner’s principle and a hybrid displacement discontinuity method (a boundary element method) proposed recently by the senior author of the paper. Because of an intrinsic feature of the boundary element method, a general crack growth problem can be solved in a single region formulation. In the numerical simulation, for each increment of crack extension, remeshing of existing boundaries is not necessary. Crack extension is modeled conveniently by adding new boundary elements on the incremental crack extension to the previous crack boundaries. As an example, fatigue growth process of an inclined crack in an infinite plate under uniaxial cycle load is modeled to illustrate the effectiveness of the numerical approach. In addition, fatigue growth of cracks emanating from a circular hole in infinite elastic plate subjected to remote loads is investigated by using the numerical approach. Many numerical results are given     

Dynamic fracture behaviour in fibre-reinforced cementitious composites

The object of this work is to simulate the dynamic fracture propagation in fibre-reinforced cementitious composites, in particular, in steel fibre reinforced concrete (SFRC). Beams loaded in a three-point bend configuration through a drop-weight impact device are considered. A single cohesive crack is assumed to propagate at the middle section; the opening of this crack is governed by a rate-dependent cohesive law; the fibres around the fracture plane are explicitly represented through truss elements. The fibre pull-out behaviour is depicted by an equivalent constitutive law, which is obtained from an analytical load–slip curve. The obtained load–displacement curves and crack propagation velocities are compared with their experimental counterparts. The good agreement with experimental data testifies to the feasibility of the proposed methodology and paves the way to its application in a multi-scale framework.     

三维裂纹分析的主值型面力边界积分方程法

给出了一组只包含Ｃａｕｃｈｙ主值积分、不含有强奇异积分的三维静动力边界积分方程及其应用于裂纹问题的具体列式，并给出了几何轴对称问题的相应半解析边界元求解方法，将三维问题降阶为一维数值问题．文中分析了无限、半无限介质中圆裂纹、平行圆裂纹系、球面裂纹等在静载及应力波作用下的静力或瞬态动力响应问题，求得了相应的应力强度因子．     

FATIGUE GROWTH MODELING OF MIXED-MODE CRACK IN PLANE ELASTIC MEDIA

This paper presents an extension of a displacement discontinuity method with cracktip elements （a boundary element method） proposed by the author for fatigue crack growth analysis in plane elastic media under mixed-mode conditions. The boundary element method consists of the non-singular displacement discontinuity elements presented by Crouch and Starfield and the crack-tip displacement discontinuity elements due to the author. In the boundary element implementation the left or right crack-tip element is placed locally at the corresponding left or right crack tip on top of the non-singular displacement discontinuity elements that cover the entire crack surface and the other boundaries. Crack growth is simulated with an incremental crack extension analysis based on the maximum circumferential stress criterion. In the numerical simulation, for each increment of crack extension, remeshing of existing boundaries is not required because of an intrinsic feature of the numerical approach. Crack growth is modeled by adding new boundary elements on the incremental crack extension to the previous crack boundaries. At the same time, the element characteristics of some related elements are adjusted according to the manner in which the boundary element method is implemented. As an example, the fatigue growth process of cracks emanating from a circular hole in a plane elastic plate is simulated using the numerical simulation approach.     

On a method of comparison for plate elements in finite element engineering software programs

The purpose of this paper is to propose a method for the evaluation of plate elements in the finite element engineering software comparatively to the Kirchhoff and Reissner plate theories. The method is based on the study of transverse deflection near a crack tip. A numerical work has been conducted for the shell elements in Abaqus software with different crack lengths and various thicknesses. The deflection can be written as a function of the exponent of the distance between the crack tip and one point along the crack. This exponent is accepted to describe the behaviour of finite elements.     

A damage model for crack initiation and growth

A damage accumulation model is presented for the study of the problem of crack initiation and stable growth in an elastic-plastic material. A centre-cracked specimen subjected to a uniform stress perpendicular to the crack plane is considered. A coupled stress and failure analysis is performed by using a finite element computer program based on J₂-plasticity theory in conjunction with the strain energy density theory. After initial yielding, each material element follows a different equivalent uniaxial stress-strain behavior depending on the amount of energy dissipation by permanent deformation. A host of uniaxial stress-strain curves constituting parts of the same stress-strain curve were assigned to material elements for each increment of loading. The path-dependent nature of the onset of crack initiation and growth was revealed. The proposed model predicts faster crack growth rates than those obtained on the basis of a single uniaxial stress-strain curve and is closer to experimental observation.     

一种XFEM断裂分析的裂尖单元新型改进函数

提出了一种适用于裂尖改进单元的新型改进函数, 基于三角变换的方法, 保留裂纹尖端场的应力奇异性和裂纹上、下表面的位移不连续性, 将常规扩展有限元法裂尖改进单元的4 项改进函数缩减为2 项, 裂尖改进单元的结点由常规的8 个改进自由度减少为4 个. 采用2 个正交的水平集函数表征材料内部裂纹面, 详细阐述了改进单元类型的判别方法, 给出一种改进单元的分区域积分方案. 最后, 若干断裂力学问题经典算例的数值计算结果表明:建议的裂尖改进函数具有较高的数值精度, 该方法是十分有效的.     

Three-dimensional fracture analysis using tetrahedral enriched elements and fully unstructured mesh

In the absence of automated and customized methods and tools, some of today’s existing methods for solving three-dimensional fracture problems require comprehensive finite element meshing, labor-intensive analysis and post-processing efforts. In this study, a tetrahedral enriched element method and related applications are presented that demonstrate employment of fully unstructured tetrahedral meshes for general mixed-mode three-dimensional fracture problems. As in the case of hexahedral enriched elements, the tetrahedral enriched elements also alleviate the needs of pre- and post-processing the finite element model, allowing direct computation of stress intensity factors in the solution phase. In addition, when tetrahedral enriched elements are used, the crack front region can also be meshed using unstructured elements allowing direct use of automatic free-meshing programs. The applications presented are plane-strain central crack problem, mode-I surface crack in a plate, inclined penny-shaped crack, edge-cracked bar under constant heat flux and lens-shaped crack embedded in a large elastic body. The results obtained are in good comparative agreement with those available in the literature. Thus, it is concluded that the enriched tetrahedral elements can be applied efficiently and accurately on a general three-dimensional fracture problem allowing usage of fully unstructured finite element meshes.     

Kinked crack analysis by a hybridized boundary element/boundary collocation method

In this research a two dimensional displacement discontinuity method (which is a kind of indirect boundary element method) using higher order elements (i.e. a source element with a cubic variation of displacement discontinuities having four sub-elements) is used to obtain the displacement discontinuities along each boundary element. In this paper, three kinds of the higher order boundary elements are used: the ordinary elements, the kink elements and the special crack tip elements.The boundary collocation technique is used for the calculation of the displacement discontinuities at the center of each sub-elements. Again a special boundary collocation technique is used to treat the kinked source elements occur in the crack analysis. Considering the two source elements (each having four sub-elements) joined at a corner (kink point). The collocation points in the cubic element model which are outside of the kink point are moved to the crack kink then the displacement discontinuities on the left and right sides of the kink are calculated. The displacement discontinuities of the kink point are obtained by averaging the corresponding values of its left and right sides. The special crack tip elements are also treated by the boundary displacement collocation technique considering the singularity variation of the displacements and stresses near the crack tip. Some simple example problems are solved numerically by the proposed method. The numerical results are compared with the corresponding results obtained by the previous methods cited in the literature. This comparison shows a very good agreement between the results and verify the accuracy and validity of the proposed method.     

NEW BOUNDARY ELEMENT METHOD FOR TORSION PROBLEMS OF CYLINDER WITH CURVILINEAR CRACKS

The Saint-Venant torsion problems of a cylinder with curvilinear cracks were considered and reduced to solving the boundary integral equations only on cracks. Using the interpolation models for both singular crack tip elements and other crack linear elements, the boundary element formulas of the torsion rigidity and stress intensity factors were given. Some typical torsion problems of a cylinder involving a straight, kinked or curvilinear crack were calculated. The obtained results for the case of straight crack agree well with those given by using the Gauss-Chebyshev integration formulas, which demonstrates the validity and applicability of the present boundary element method.     

求解含钝裂纹体应力场的扩展单元方法

本文基于钝裂纹端部位移场的渐近解和等参元构造方法,开发了一种新的适合钝裂纹端部应力场计算的扩展单元法,为了消除不同单元间的位移不协调又在扩展单元的基础上提出过渡单元.和常规的等参元相比,扩展单元除了以节点位移为待求未知量外,它们额外增加了Ⅰ型和Ⅱ型广义应力强度因子作为未知量.根据这个理论我们编制了有限元的程序并计算了算例,算例表明,在网格较大的情况下,与常规等参元计算方案相比,扩展单元和过渡单元法更好地接近理论值,它具有计算精度高、减少缺陷附近的单元数量和计算时间等优点.