Spectrophotometric determination of cationic surfactants by formation of ternary complexes with Fe(III) and chrome azurol

An extraction-free spectrophotometric method for the determination of cationic surfactants, such as cetylpyridinium chloride, cetyltrimethylammonium bromide and zephiramine is proposed, which is based on the formation of ternary complexes with Fe(III) and chrome azurol S. The molar ratio of the complex is 2:1:1 (Fe(III):chrome azurol S: cationic surfactant). The method is simple, rapid and sensitive, giving an apparent molar absorptivity of 4.5×10⁴ L·mol^?1-cm^?1 and a linear range of 0.1–6.0 μmol/L cationic surfactants. The total cationic surfactant content can be determined directly in aqueous solutions by measuring the absorbance at 680 nm (pH 5.8). The method has been successfully applied to water samples.     

Spectrophotometric determination of iron in aluminium metal and some non-ferrous alloys

A new, sensitive and selective spectrophotometric method is suggested for the determination of traces of iron(III) based on complex formation with hematoxylin in presence of cetyltrimethylammonium bromide (CTAB). Addition of CTAB shifted the absorption maximum of the iron-hematoxylin complex from 630 to 640 nm and increased its molar absorptivity from 9.88 × 10⁴ to 1.16 × 10⁵ 1·mol^–1·cm^–1. The method adhered to Beer's law up to 0.4 and 0.2 g/ml of iron in presence and absence of CTAB, respectively. The corresponding values of Sandell's sensitivity were 0.5 and 0.6 ng·cm^–2. The effect of reagent and surfactant concentrations, pH and standing time were investigated. EDTA, tartrate and sodium fluoride were used as masking agents for most of the interfering ions. The method was successfully used for the determination of iron in aluminium metal and some non-ferrous alloys.     

Spectrophotometric and derivative spectrophotometric determination of palladium(II) using pyridopyridazine dithione in the presence of non-ionic surfactant

Pyridopyridazine dithione (PPD) was synthesized as a new sensitive and selective reagent for spectrophotometric and derivative spectrophotometric determination of palladium(II). In aqueous and micellar medium, PPD forms 1:4 complexes having molar absorptivities of 4.68 × 10⁴ and 5.74 × 10⁴lmol^–1 cm^–1 at 570 and 615 nm, respectively. Beer's law was obeyed up to 2.2 and 2.5 g ml^–1 with detection limits of 0.2 and 0.1g ml^–1. The relative standard deviations for 1.23g ml^–1 were 2.6 and 1.3%, in the absence and presence of Triton X-100. In fourth-derivative mode, the regression equation, linear range, detection limit and RSD for 0.075 g ml^–1 wereD ₄ = 4.3C + 1.5 × 10^–3, 0.013 – 0.23 g ml^–1, 3.7 ng ml–1 and 0.78%, respectively. The ionization constants of the reagent and stability constants of the complexes were evaluated. The method is free from interference by most common metal ions and anions. The method was applied for determination of palladium in activated charcoal.     

Reaction of iron(III) with tiron in the presence of ferrozine, and determination of tiron

Tiron is oxidized by iron(III) in the presence of Ferrozine with an apparent four-electron transfer and aromatic ring opening. The apparent molar absorptivity referred to the Tiron in the reaction corresponds to approximately 1.12 x 10(5) l.mole(-1).cm(-1).     

Spectrophotometric determination of cationic and anionic surfactants with anionic dyes in the presence of nonionic surfactants,part I: A general aspect

The behavior of color development of anionic azo dyes, methyl orange and its analogues, was examined in aqueous media by changing the microenvironment of the dyes. The addition of alcohols, organic onium ions, anionic surfactants and nonionic surfactants brought about a decrease of the band at wavelengths near 480 nm and an increase of the band at wavelengths near 420 nm. Such a shift toward the shorter wavelengths in spectra was attributed to the change of the micro-environment around the dyes from a polar field to a less polar field; that is, the shift is caused by the change of the contribution of the following resonance forms, On the basis of the color change phenomena, the spectrophotometric methods for the determination of organic onium ions and anionic surfactants were proposed.     

Spectrophotometric determination of iron after separation of its 9,10-phenanthrenequinone monoximate on microcrystalline naphthalene

A sensitive and selective spectrophotometric method has been developed for the determination of iron as Fe(II) or Fe(III) using 9,10-phenanthrenequinone monoxime (PQM) as the complexing agent. Fe(II) and Fe(III) react with PQM to form coloured water insoluble complexes which can be adsorbed on microcrystalline naphthalene in the pH ranges 3.7–6.2 and 2.0–8.4, respectively. The solid mass consisting of the metal complex and naphthalene is dissolved in DMF and the metal determined spectrophotometrically by measuring the absorbances Fe(II) at 745 nm and Fe(III) at 425 nm. Beer's law is obeyed over the concentration range 0.5–20.0 g of iron(II) and 20–170.0 g of Fe(III) in 10 ml of DMF solution. The molar absorptivities are 1.333 × 10⁴ 1 · mole^–1 · cm^–1 for Fe(II) and 2.428 × 10³1· mole^–1 · cm^–1 for Fe(III). The precision of determination is better than 1%. The interference of various ions has been studied and the method has been employed for the determination of iron in various standard reference alloys, bears, wines, ferrous gluconate, human hair and environmental samples.     

Spectrophotometric determination of vanadium(IV) in the presence of vanadium(V) using Br-PADAP

In the present paper, a simple and sensitive method is proposed for vanadium(IV) determination in the presence of vanadium(V). This is based on the oxidation of vanadium(IV) present in the sample to vanadium(V) by addition of iron(III) cation, followed by a complexation reaction of iron(II) with the spectrophotometric reagent 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (Br-PADAP). The iron(II) reacts with Br-PADAP immediately, forming a stable complex with a large molar absorptivity. The vanadium(IV) determination is possible, with a calibration sensitivity of 0.549 g ml^–1, for an analytical curve of 18.8 ng ml^–1 to 2.40 g ml^–1, molar absorptivity of 2.80 × 10⁴ 1 mole^–1 cm^–1 and a detection limit of 5.5 ng ml^–1. Selectivity was increased with the use of EDTA as a masking agent. The proposed method was applied for the vanadium(IV) determination in the presence of several amounts of vanadium(V). The results revealed that 200 g of vanadium(V) do not interfere with determination of 5.00 g of vanadium(IV). The precision and the accuracy obtained were satisfactory (R. S. D.<2%).     

Spectrophotometric determination of ascorbic acid with iron(III) and p-carboxyphenylfluorone in a cationic surfactant micellar medium.

A simple and highly sensitive spectrophotometric method for the determination of ascorbic acid (AA) was established by using iron(III) and p-carboxyphenylfluorone (PCPF) in a cationic surfactant micellar medium. The apparent molar absorptivity of the proposed method, which does not require an extraction procedure, was 2.05 x 10(6) dm3 mol-1 cm-1 at 655 nm. Beer's law was obeyed in the concentration range of 0.02-0.12 microgram/cm3 for AA. The procedure was successfully applied to assays of AA in pharmaceutical preparations. It is suggested that the method is based on a coupled redox-complexation reaction in which the first step is the oxidation of AA by iron(III), and the second step includes the formations of the iron(II)-PCPF (1:2) complex and the dehydroascorbic acid-iron(III)-PCPF (1:1:2) complex.     

Spectrophotometric study on the quaternary complex of titanium (IV) with secondary ligands, 2,6,7-trihydroxylphenyl-fluorone derivatives and cetyltrimethylammonium bromide

The new color reactions of titanium (IV) with six 2,6,7-trihydroxyl-9-phenylsubstituted-3-fluorone derivatives (THPF) have been studied in the presence of nitrilotriacetic acid (NTA) and cetyltrimethylammonium bromide (CTMAB). The effects of secondary ligands such as NTA, ascorbic acid, hydroxylamine and mandelic acid on the ternary complex of titanium (IV) have been reported. It was found that the system of titanium (IV)-2,6,7-trihydroxyl-9-(2,4-dichlorophenyl)-3-fluorone (DCPF)-NTA-CTMAB quaternary complex is the most sensitive in these systems studied. The apparent molar absorptivity of the complex at 576 nm is 1.9 × 10⁵ 1·mol^–1·cm^–1. The stoichiometric ratio of the Ti (IV)-NTA-DCPF-CTMAB complex is estimated to be 1 1 3 3. The proposed method proves to be satisfactory for the direct determination of titanium in alloy steels, silicate minerals and aluminium alloys. The method is highly sensitive and selective.     

Spectrophotometric determination of furosemide as its Fe(III) complex in pharmaceutical preparations

A new spectrophotometric method for determination of furosemide is described. The method is based on the reaction of furosemide with ferric chloride in pH range 5.2–6.2 and producing a red water-soluble (2 1) complex with maximum absorbance at 513 nm. By applying the methods of Sommer and Job involving non-equimolar solutions the conditional stability constant of the complex, at the optimum pH of 5.7, and ionic strength =0.1M, is found to be 10^6.5. Beer's law is obeyed up to 8 mmol/l furosemide concentration. The detection limit of the method is 0.03 mg/ml. The relative standard deviation (n=20) is 1.03% and relative error of the method is 0.5%. The proposed method was found to be suitable for the accurate and reproducible analysis of furosemide in tablets and ampoules, what is pointed by high recovery values 98.78–100.6% and low values of relative standard deviations 1.68–2.08%. The results obtained show that the method is applicable to routine analysis.     

Spectrophotometric and derivative spectrophotometric study of the reaction of palladium (II) and rhodium (III) with 5-(3,4-methoxyhydroxybenzylidene)rhodanine and cationic surfactants

Spectrophotometric and derivative spectrophotometric methods for the determination of Pd(II) and Rh(III) are proposed. Pd(II) forms with 5-(3,4-methoxyhydroxybenzylidene)rhodanine [3,4-MHBR], in the absence and presence of cetylpyridinium bromide [CPB], 14 binary and 134 ternary complexes having molar absorptivities of 5.77 × 10⁴ and 7.46 × 10⁴ M ^–1cm^–1 at 525 and 530 nm, respectively. Rh(III) forms a 14 complex with 3,4-MHBR in the presence of cetyltrimethylammonium bromide [CTAB], which gives a maximum absorbance at 445 nm with a molar absorptivity of 5.13 × 10⁴ M ^–1cm^–1. Derivative spectrophotometric methods are employed for the determination of Pd(II) and Rh(III) at ng ml^–1 levels utilizing these complexes. Under the optimum conditions the calibration lines for Pd(II) and Rh(III) determination fit the equations d⁴ A/d⁴ = 1.10 × 10⁶ [Pd] – 0.018 (r = 0.9967) and d⁴ A/d⁴ = 2.25 × 10⁶ [Rh] + 0.03 (r = 1.0426) and have detection limits of 5.6 and 1.2 ng ml^–1, respectively. The influences of experimental variables and foreign ions are studied. The methods are free of interference from most common metal ions and anions. The results of the analysis of some synthetic mixtures of Pd(II) and Rh(III) are reported.     

Formation of ternary ion associates using diprotic acid dyes and its application to determination of cationic surfactants

A sensitive and selective method is described for the determination of cationic surfactants, such as benzethonium, benzalkonium, cetylpyridinium and trimethylstearylammonium, based on the formation and extraction of ternary ion associates with an acid dye (bromophenol blue or bromochlorophenol blue) and quinidine. Quinidine reacts with divalent anionic dyestuffs to form a bulky 11 complex anion, which is extractable into 1,2-dichloroethane as ternary ion associates with cationic surfactants in nearly neutral media. The ternary ion associate gives a blue product. Linearity of the calibration curve is improved and the extractability of the cationic surfactants is enhanced in the presence of quinidine. In addition, many other amines do not interfere with the determination. The blue ion associates can be used for the selective and sensitive spectrophotometric determination of cationic surfactants.     

Spectrophotometric determination of ammonia-nitrogen after preconcentration as indothymol on a glass-fiber filter in the presence of a cationic surfactant

Ammonia-nitrogen, in the range 0.06 to 2 g in 20 ml of water sample, is treated with hypochlorite and thymol to form an intensely blue anionic dye called indothymol. The indothymol is collected on a glass-fiber filter as the ion-pair with benzyldimethyltetradecylammonium ion. The indothymol collected on the filter is dissolved in a small volume of dimethylformamide (DMF) and the absorbance due to the indothymol is measured at 675 nm against the reagent blank. An unexpectedly high sensitivity was obtained because of the increased molar absorptivity of indothymol in DMF (3.2 × 10⁴ l mol^–1 cm^–1, _max = 675 nm), approximately 3 times larger than that in water (1.16 × 10⁴ l mol^–1 cm^–1, _max = 660 nm). The detection limit, defined as three times the standard deviation of the blank, is better than 1 g 1^–1 of ammonia-nitrogen with 5-fold preconcentration.     

Spectrophotometric determination of iron (II) using a highly sensitive chromogenic reaction of 4-(2-benzothiazolylazo)pyrocatechol

4-(2-Benzothiazolylazo)pyrocatechol (BTAPC), a new organic reagent, reacts with Fe(II) to form a stable, water-soluble, violet, positively charged, binary complex over a pH range of 6.3 to 6.8. Some water-miscible organic solvents and surfactants have solubilization and sensibilization effects. In 40% acetone-water medium at 25 °C, a (ionic strength) value of 0.1 and a pH value of 6.5, the ratio of Fe(II) to BTAPC in the complex is 1 2 with an apparent stability constant of 1.97 × 10⁹ and two absorption peaks at 535 and 615 nm. If the absorbance is measured at 615 nm, not only the sensitivity is high (₆₁₅ = 1.10 × 10⁵ 1 · mol^–1 · cm^–1) and the contrast () is large (90 nm), but also the selectivity is fairly good. Beer's law is obeyed for iron along the range of 0 to 16 g per 25 ml. The satisfactory results have been achieved after applying the method to the determination of traces of iron in water.     

Zero-Order and Third-Derivative Spectrophotometric Determination of Iron(III) with 4-(2-Pyridylazo)-Resorcinol in the Presence of N-Hexadecylpyridinium Chloride

Abstract

The complex formation reaction between iron(III) and 4-(2-pyridylazo) resorcinol(PAR) in the presence of various water soluble surfactants((N-hexadecylpyridinium chloride (HPC), poly(vinylalcohol)(PVA), sodium dodecylsulfate(SDS), sodium N-lauroylsarcosine(SL)) alone or in combination at weakly acidic media was systematically investigated. An improved and more sensitive spectrophotometric method for the determination of iron was proposed by zero-order and third-derivative spectrophotometry using the PAR-iron(III)-HPC ternary complex system at about pH 5.2. The calibration curve was rectilinear in the ranges of 0 – 15.0 μg iron(III) in a final 10-ml on the zero-order spectrophotometry. Also, upon the third-derivative spectrophotometry, Beer's law was obeyed in the range of 0 – 8.0 μg iron(III)/10 ml by measuring the distance between the absorbance peak(λ₁ = 527 nm) and the valley (λ₂ = 560 nm). The apparent molar absorptivity was 4.8 × 10⁴ 1 mol^?1 cm^?1 in zero-order spectrophotometry, and 1.36 × 10⁵ mol^?1 cm^?1 in third-derivative spectrophotometry. The effect of foreign ions was decreased within ½ – ¼-fold in comparison with the method in the presence of PVA without HPC. Especially, the third-derivative spectrophotometric method was sensitive and selective, and made possible to assay mixed sample solution containing iron(III) and copper(II), etc.     

Spectrophotometric determination of iron(II) with 1,10-phenanthroline in the presence of large amounts of iron(III)

A study was made to establish proper conditions for the selective determination of Fe(II) by the 1,10-phenanthroline method in the presence of large amounts of Fe(III). It was shown that fe(III) is effectively masked by fluoride. The pH of the solution to be masked should be below 2.5 in order to prevent acceleration by the fluoride of aerial oxidation of Fe(II).     

Features of the oxidative polymerization of aminothiazole in the presence of iron(III) chloride

A new conjugated polymer with semiconducting characteristics-polyaminothiazole-was obtained by oxidative polymerization of 2-aminothiazole in the presence of iron(III) chloride. A reaction scheme is proposed on the basis of the data from IR, ESR, and electronic spectroscopy. It involves the formation of an intermediate aminothiazole-FeCl₃ complex with coordination of the initiator at the nitrogen atom and subsequent oxidation of another molecule of aminothiazole by this complex with the formation of a radical-cation, leading to polymerization. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 2, pp. 91–95, March–April, 2007.     

Simultaneous determination of iron(II) and iron(III) in aqueous solution by kinetic spectrophotometry with tiron

A kinetic spectrophotometric method that requires no prior measurement of rate constants is developed for the simultaneous determination of iron(II) and iron(III). The method is based on the aerial oxidation of iron(II) in the presence of tiron and acetate ions. The iron(III) formed is subsequently complexed with tiron and the absorbance/time relation is evaluated. The concentrations of iron(III) and iron(II) are obtained from the absorbance values at the start and at equilibrium, respectively, calculated by non-linear least-squares fitting. A linear calibration graph is obtained up to 12 μg ml^?1 iron(II)/iron(III). The method is applied to iron-rich ground water.     

Spectrophotometric determination of 1-naphthylamine in urine with pentacyanonitrosylmanganate (II)

A new Spectrophotometric method is proposed for the determination of 1-naphthylamine (R), based on its reaction with Mn(CN)₅NO^2– to form Mn(CN)₅NH₂R^3– and measurement of the absorbance at 472 nm. In aqueous medium the molar absorptivity of the manganese complex is maximum ( = 8.0 × 10³1 · mole^–1 ·cm^–1) in the pH range 5.0–10.0, the colour develops more rapidly at pH 10.0. The absorptivity is increased by a factor of 3.5 if the complex is extracted as an ion-associate into chloroform. The extraction efficiency is 99.2% for a single-step extraction, and a concentration factor of 5 can also be achieved. Linearity of response extends over the range 0.04–1.4 gmg/ml 1-naphthylamine, the coefficient of variation being 1.4% at the 0.29 g/ml level (n = 6). The detection and determination limits are 0.005 and 0.018 g/ml, respectively. The method is selective enough to allow the determination of 1-naphthylamine in the presence of considerable amounts of other amines, such as aminophenols and phenylenediamines. Results obtained in the determination of 1-naphthylamine in human urine were very satisfactory.