Fluorous phase-transfer activation of catalysts: application of a new rate-enhancement strategy to alkene metathesis

Reactions of the bis(pyridine) complex (H2IMes)(Py)2(Cl)2Ru(=CHPh) and fluorous phosphines P(CH2CH2R(fn))3 (n = a, 6; b, 8; c, 10; R(fn) = (CF2)(n-1)CF3) give (H2IMes)(P(CH2CH2R(fn))3)(Cl)2Ru(=CHPh) (2a-c, 64-73%), which are analogs of Grubbs' second generation catalyst and effective alkene metathesis catalysts under organic monophasic and fluorous/organic biphasic conditions. The latter give rate accelerations, which are believed to arise from phase transfer of the dissociated fluorous phosphine.     

Catalytic Effect of Cobalt and Iron Complexes Incorporating Bis(2-aldiminoethyl)amine Ligands on Ethylene Oligomerization

IntroductionThe finding of a new promising family ofFe( ) - and Co( ) - based bis( imino) pyridyl cata-lysts for ethylene polymerization and oligomeriza-tion,discovered by Brookhart,Gibson andcoworkers[1— 3 ] ,has intrigued us into researchingthe preparation,the structure and the chemistry ofiron and cobalt complexes incorporating N,N ,N -tridentate ligands.The spectacular enhancement ofthe reactivity of iron and cobalt complexes towardsZiegler- Natta olefin polymerization has been re-po…     

Atmospheric chemistry of propionaldehyde: kinetics and mechanisms of reactions with OH radicals and Cl atoms, UV spectrum, and self-reaction kinetics of CH3CH2C(O)O2 radicals at 298 K

The kinetics and mechanism of the reactions of Cl atoms and OH radicals with CH3CH2CHO were investigated at room temperature using two complementary techniques: flash photolysis/UV absorption and continuous photolysis/FTIR smog chamber. Reaction with Cl atoms proceeds predominantly by abstraction of the aldehydic hydrogen atom to form acyl radicals. FTIR measurements indicated that the acyl forming channel accounts for (88 +/- 5)%, while UV measurements indicated that the acyl forming channel accounts for (88 +/- 3)%. Relative rate methods were used to measure: k(Cl + CH3CH2CHO) = (1.20 +/- 0.23) x 10(-10); k(OH + CH3CH2CHO) = (1.82 +/- 0.23) x 10(-11); and k(Cl + CH3CH2C(O)Cl) = (1.64 +/- 0.22) x 10(-12) cm3 molecule(-1) s(-1). The UV spectrum of CH3CH2C(O)O2, rate constant for self-reaction, and rate constant for cross-reaction with CH3CH2O2 were determined: sigma(207 nm) = (6.71 +/- 0.19) x 10(-18) cm2 molecule(-1), k(CH3CH2C(O)O2 + CH3CH2C(O)O2) = (1.68 +/- 0.08) x 10(-11), and k(CH3CH2C(O)O2 + CH3CH2O2) = (1.20 +/- 0.06) x 10(-11) cm3 molecule(-1) s(-1), where quoted uncertainties only represent 2sigma statistical errors. The infrared spectrum of C2H5C(O)O2NO2 was recorded, and products of the Cl-initiated oxidation of CH3CH2CHO in the presence of O2 with, and without, NO(x) were identified. Results are discussed with respect to the atmospheric chemistry of propionaldehyde.     

Synthesis, structures and stabilities of thioanisole-functionalised phosphido-borane complexes of the alkali metals

Treatment of the secondary phosphine {(Me(3)Si)(2)CH}PH(C(6)H(4)-2-SMe) with BH(3)·SMe(2) gives the corresponding phosphine-borane {(Me(3)Si)(2)CH}PH(BH(3))(C(6)H(4)-2-SMe) (9) as a colourless solid. Deprotonation of 9 with n-BuLi, PhCH(2)Na or PhCH(2)K proceeds cleanly to give the corresponding alkali metal complexes [[{(Me(3)Si)(2)CH}P(BH(3))(C(6)H(4)-2-SMe)]ML](n) [ML = Li(THF), n = 2 (10); ML = Na(tmeda), n = ∞ (11); ML = K(pmdeta), n = 2 (12)] as yellow/orange crystalline solids. X-ray crystallography reveals that the phosphido-borane ligands bind the metal centres through their sulfur and phosphorus atoms and through the hydrogen atoms of the BH(3) group in each case, leading to dimeric or polymeric structures. Compounds 10-12 are stable towards both heat and ambient light; however, on heating in toluene solution in the presence of 10, traces of free phosphine-borane 9 are slowly converted to the free phosphine {(Me(3)Si)(2)CH}PH(C(6)H(4)-2-SMe) (5) with concomitant formation of the corresponding phosphido-bis(borane) complex [{(Me(3)Si)(2)CH}P(BH(3))(2)(C(6)H(4)-2-SMe)]Li (14).     

Olefin metatheses in metal coordination spheres: versatile new strategies for the construction of novel monohapto or polyhapto cyclic, macrocyclic, polymacrocyclic, and bridging ligands

The broad applicability of the title reaction is established through studies of neutral and charged, coordinatively saturated and unsaturated, octahedral and square planar rhenium, platinum, rhodium, and tungsten complexes with cyclopentadienyl, phosphine, and thioether ligands which contain terminal olefins. Grubbs' catalyst, [Ru(=CHPh)(PCy3)2(Cl)2], is used at 2-9 mol% levels (0.0095-0.00042 M, CH2-Cl2). Key data are as follows: [(eta5-C5H4(CH2)6CH=CH2)Re(NO)(PPh3)-(CH3)], intermolecular metathesis (95 %); [(eta5-C5H5)Re(NO)(PPh3)(E(CH2CH=CH2)2)]+ TfO (E=S, PMe, PPh), formation of five-membered heterocycles (96-64%; crystal structure E = PMe); [(eta5-C5Me5)Re(NO)(PPh((CH2)6CH=CH2)2)(L)]n+ nBF4-(L/n = CO/1, Cl/0), intramolecular macrocyclization (94-89%; crystal structure L= Cl); fac-[(CO)3Re(Br)(PPh2(CH2)6CH=CH2)2] and cis-[(Cl)2Pt(PPh2(CH2)6CH=CH2)2], intramolecular macrocyclizations (80-71%; crystal structures of each and a hydrogenation product); cis-[(Cl)2Pt(S(R)(CH2)6CH= CH2)2], intra-/intermolecular macrocyclization (R=Et, 55%/24%; tBu, 72%/ <4%); trans-[(Cl)(L)M(PPh2(CH2)6CH=CH2)2] (M/L = Rh/CO, Pt/C6F5) intramolecular macrocyclization (90-83%; crystal structure of hydrogenation product, M=Pt); fac-[W(CO)3(PPh((CH2)6CH=CH2)2)3], intramolecular trimacrocyclization (83 %) to a complex mixture of triphosphine, diphosphine/ monophosphine, and tris(monophosphine) complexes, from which two isomers of the first type are crystallized. The macrocycle conformations, and basis for the high yields, are analyzed.     

Tethered olefin studies of alkene versus tetraphenylborate coordination and lanthanide olefin interactions in metallocenes

The tethered olefin cyclopentadienyl ligand, [(C(5)Me(4))SiMe(2)(CH(2)CH=CH(2))](-), forms unsolvated metallocenes, [(C(5)Me(4))SiMe(2)(CH(2)CH=CH(2))](2)Ln (Ln = Sm, 1; Eu, 2; Yb, 3), from [(C(5)Me(4))SiMe(2)(CH(2)CH=CH(2))]K and LnI(2)(THF)(2) in good yield. Each complex in the solid state has both tethered olefins oriented toward the Ln metal center with the Ln-C(terminal alkene carbon) distances 0.2-0.3 A shorter than the Ln-C(internal alkene carbon) distances. The olefinic C-C bond distances in 2 and 3, 1.328(4) and 1.328(5) A, respectively, are normal. Like its permethyl analogue, (C(5)Me(5))(2)Sm(THF)(2), complex 1 reductively couples CO(2) to form the oxalate-bridged dimer [[(C(5)Me(4))SiMe(2)(CH(2)CH=CH(2))](2)Sm](2)(mu-eta(2):eta(2)-O(2)CCO(2)), 4, in which the tethered olefins are noninteracting substituents. Complex 1 reacts with AgBPh(4) to form an unsolvated cation that has the option of coordinating [BPh(4)](-) or a pendant olefin, a competition common in olefin polymerization catalysis. The structure of [[(C(5)Me(4))SiMe(2)(CH(2)CH=CH(2))](2)Sm][BPh(4)], 5, shows that both pendant olefins are located near samarium rather than the [BPh(4)](-) counterion.     

Ionic-liquid-promoted decaborane dehydrogenative alkyne-insertion reactions: a new route to o-carboranes

Unlike in conventional organic solvents, where Lewis base catalysts are required, decaborane dehydrogenative alkyne-insertion reactions proceed rapidly in biphasic ionic-liquid/toluene mixtures with a wide variety of terminal and internal alkynes, thus providing efficient, one-step routes to functional o-carborane 1-R-1,2-C2B10H11 and 1-R-2-R'-1,2-C2B10H10 derivatives, including R = C6H5- (1), C6H13- (2), HC[triple bond]C-(CH2)5- (3), (1-C2B10H11)-(CH2)5- (4), CH3CH2C(O)OCH2- (5), (C2H5)2NCH2- (6), NC-(CH2)3- (7), 3-HC[triple bond]C-C6H4- (8), (1-C2B10H11)-1,3-C6H4- (9), HC[triple bond]C-CH2-O-CH2- (10); R,R' = C2H5- (11); R = HOCH2-, R' = CH3- (12); R = BrCH2-; R' = CH3- (13); R = H2C=C(CH3)-, R' = C2H5- (14). The best results were obtained from reactions with only catalytic amounts of bmimCl (1-butyl-3-methylimidazolium chloride), where in many cases reaction times of less than 20 min were required. The experimental data for these reactions, the results observed for the reactions of B10H13(-) salts with alkynes, and the computational studies reported in the third paper in this series all support a reaction sequence involving (1) the initial ionic liquid promoted formation of the B10H13(-) anion, (2) addition of B10H13(-) to the alkyne to form an arachno-R,R'-C2B10H13(-) anion, and (3) protonation of arachno-R,R'-C2B10H13(-) to form the final neutral 1-R-2-R'-1,2-C2B10H10 product with loss of hydrogen.     

温控离子液体/有机两相体系中纳米Rh催化烯烃氢甲酰化反应

将具有"高温混溶、室温分相"功能的离子液体[CH3(OCH2CH2)16N+Et3][CH3SO3–](ILPEG750)与甲苯-正庚烷组成的两相体系用于纳米Rh催化的烯烃氢甲酰化反应中,在优化的反应条件下,1-辛烯转化率和醛收率分别为99%和91%.催化剂经简单分相即可与产物分离,且可连续使用8次,其活性基本保持不变.     

Alkene hydrogenation on an 11-vertex rhodathiaborane with full cluster participation

The facile synthesis of the metallaheteroborane [8,8-(PPh 3) 2- nido-8,7-RhSB 9H 10] ( 1) makes possible the systematic study of its reactivity. Addition of pyridine to 1 gives in high yield the 11-vertex nido-hydridorhodathiaborane [8,8,8-(PPh 3) 2H-9-(NC 5H 5)- nido-8,7-RhSB 9H 9] ( 2). 2 reacts with C 2H 4 or CO to form [1,1-(PPh 3)(L)-3-(NC 5H 5)- closo-RhSB 9H 8] [L = C 2H 4 ( 3), CO ( 4)]. In CH 2Cl 2 at reflux temperature 2 undergoes a nido to closo transformation to afford [1,1-(PPh 3) 2-3-(NC 5H 5)- closo-1,2-RhSB 9H 8] ( 5). Reaction of 2 with alkenes leads to hydrogenation and isomerization of the olefins. NMR spectroscopy indicates the presence of a labile phosphine ligand in 2, and DFT calculations have been used to determine which of the two phosphine groups is labile. Rationalization of the hydrogenation mechanism and the part played by the 2 --> 3 nido to closo cluster change during the reaction cycle is suggested. In the proposed mechanism the classical hydrogen transfer from hydride metal complexes to olefins occurs twice: first upon coordination of the alkene to the rhodium centre in 2, and second concomitant with formation of a closo-hydridorhodathiaborane intermediate by migration of a BHB-bridging hydrogen atom to the metal. Reaction of H 2 with 3 or 5 regenerates 2, closing a reaction cycle that under catalytic conditions is capable of hydrogenating alkenes. Single-site versus cluster-bifunctional mechanisms are discussed as possible routes for H 2 activation.     

Chemistry and stereochemistry of the interaction of the water-soluble phosphine [HO(CH2)3]3P with cinnamaldehyde in aqueous media

To learn more about the bleaching action of pulps by (hydroxymethyl)phosphines, cinnamaldehyde was reacted with tris(3-hydroxypropyl)phosphine, [HO(CH2)3]3P (THPP), in aqueous solution at room temperature under argon. Self-condensation of the aldehyde into two isomeric products, 2-benzyl-5-phenyl-pent-2,4-dienal and 5-phenyl-2-(phenylmethylene)-4-pentenal, is observed; this implies initial nucleophilic attack of the phosphine at the beta-carbon of the alpha,beta-unsaturated aldehyde. Reaction in D2O gives the same products in which all but the phenyl and CHO protons are replaced by deuterons. NMR studies are consistent with carbanion formation and subsequent condensation of two phosphonium-containing aldehyde moieties to generate the products with concomitant elimination of phosphine oxide. In D2O in the presence of HCl, THPP reversibly attacks the aldehyde-C atom to form the (alpha-hydroxy)phosphonium derivative [PhCH=C(H)CH(OD)PR3]Cl (where R=(CH2)3OD), which slowly converts into the deuterated bisphosphonium salt [R3PCH(Ph)CD(H)CH(OD)PR3]Cl2 via the deuterated monophosphonium salt [R3PCH(Ph)CD(H)CHO]Cl. The phosphonium intermediates and phosphonium products in this chemistry, although having up to three chiral carbon centers, are formed with high stereoselectivity just in enantiomeric forms. In acetone-H2O (1:1 v/v), a cross-condensation of cinnamaldehyde with acetone to give 6-phenyl-3,5-hexadien-2-one is promoted by THPP via generation of OH-.     

Substitution and derivatization reactions of a water soluble iron(II) complex containing a self-assembled tetradentate phosphine ligand

Facile substitution reactions of the two water ligands in the hydrophilic tetradentate phosphine complex cis-[Fe{(HOCH2)P{CH2N(CH2P(CH2OH)2)CH2}2P(CH2OH)}(H2O)2](SO4) (abbreviated to [Fe(L1)(H2O)2](SO4), 1) take place upon addition of Cl-, NCS-, N3(-), CO3(2-) and CO to give [Fe(L1)X2] (2, X = Cl; 4, X = NCS; 5, X=N3), [Fe(L1)(kappa2-O(2)CO)], 6 and [Fe(L1)(CO)2](SO4), 7. The unsymmetrical mono-substituted intermediates [Fe(L1)(H2O)(CO)](SO(4)) and [Fe(L(1))(CO)(kappa(1)-OSO(3))] (8/9) have been identified spectroscopically en-route to 7. Treatment of 1 with acetic anhydride affords the acylated derivative [Fe{(AcOCH2)P{CH2N(CH2P(CH2OAc)2)CH2}2P(CH2OAc)}(kappa2-O(2)SO2)] (abbreviated to [Fe(L2)(kappa2-O(2)SO2)], 10), which has increased solubility over 1 in both organic solvents and water. Treatment of 1 with glycine does not lead to functionalisation of L1, but substitution of the aqua ligands occurs to form [Fe(L(1))(NH(2)CH(2)CO(2)-kappa(2)N,O)](HSO(4)), 11. Compound 10 reacts with chloride to form [Fe(L(2))Cl(2)] 12, and 12 reacts with CO in the presence of NaBPh4 to form [Fe(L2)Cl(CO)](BPh4) 13b. Both of the chlorides in 12 are substituted on reaction with NCS- and N3(-) to form [Fe(L2)(NCS)2] 14 and [Fe(L2)(N3)2] 15, respectively. Complexes 2.H2O, 4.2H2O, 5.0.812H2O, 6.1.7H2O, 7.H2O, 10.1.3CH3C(O)CH3, 12 and 15.0.5H2O have all been crystallographically characterised.     

苯乙烯与4-氨基苯酚的氢氨甲基化反应研究北大核心CSCD

氢氨甲基化反应(HAM)是由简单烯烃、胺和合成气一锅法合成有价值胺的方法,具有较高的原子经济效率.然而,4-氨基苯酚作为一种特殊的反应底物,因其同时具有羟基和胺基官能团,在羰基化反应过程中能够选择性地在不同位点发生反应获得不同的产物.因此,我们系统研究了4-氨基苯酚与烯烃的HAM,通过筛选反应参数,确定了最优反应条件,并通过调控添加剂种类,选择性地在4-氨基苯酚的不同活性位点发生反应.结果表明,以甲醇为溶剂,三(3-甲氧基苯基)膦为配体,RhCl(PPh_(3))_(3)为催化剂前驱体,合成气压力4 MPa(H_(2)∶CO=3∶1),反应温度100℃,反应时间20 h时,该催化体系具有最高的反应活性.当以CH3COOH作为添加剂时,选择性的4-氨基苯酚的胺基官能团发生氢氨甲基化反应得到产物4-[(2-苯丙基)氨基]苯酚,收率为82%;当以DBU作为添加剂时,得到苯乙酮产物,收率为92%.最后,提出了该反应可能的机理,为4-氨基苯酚的选择性反应提供理论依据.     

C12-2-En-C12•2Br与SDS混合水溶液的胶团化研究

与[C12H25N＋(CH3)2CH2]2•2Br－(简记为C12-2-C12•2Br)/ C12H25SO4Na(SDS)混合水溶液相比,随着联接链上乙氧基团(E)数目增加,[C12H25N＋(CH3)2]2C2H4(OC2H4)n•2Br－(简记为C12-2-En-C12•2Br, n=2,3)与SDS混合水溶液澄清区域明显增大. C12-2-E3-C12•2Br/SDS混合胶团化过程中二组分产生了协同效应,理论预测在澄清区域所能达到的最小临界胶团总浓度(cmcT,min)= 0.0339 mmol•L－1,对应的SDS在溶液体相中的摩尔分数(x2*)=0.447.当水溶液体相中SDS摩尔分数(x2)=0.5时,混合胶团总聚集数(NT)=36,混合胶团中SDS的摩尔分数(x2M)=0.43.     

Convenient syntheses of fluorous aryl iodides and hypervalent iodine compounds: ArI(L)n reagents that are recoverable by simple liquid/liquid biphase workups,and applications in oxidations of hydroquinones

Iodinations of the ortho, meta, and para fluorous arenes (R(f8)CH(2)CH(2)CH(2))(2)C(6)H(4) (R(f8)=(CF(2))(7)CF(3)) with I(2)/H(5)IO(6) in AcOH/H(2)SO(4)/H(2)O give 3,4-(R(f8)CH(2)CH(2)CH(2))(2)C(6)H(3)I (5) and the analogous 2,4- (6) and 2,5- (7) isomers, respectively. Spectroscopic yields are >90 %, but 5 and 7 must be separated by chromatography from by-products (yields isolated: 70 %, 97 %, 61 %). Reaction of 1,3,5-(R(f8)CH(2)CH(2)CH(2))(3)C(6)H(3) with PhI(OAc)(2)/I(2) gives 2,4,6-(R(f8)CH(2)CH(2)CH(2))(3)C(6)H(2)I (8) on multigram scales in 97 % yield. The CF(3)C(6)F(11)/toluene partition coefficients of 5-8 (24 degrees C: 69.5:30.5 (5), 74.7:25.3 (6), 73.9:26.1 (7), 98.0:2.0 (8)) are lower than those of the precursors, but CF(3)C(6)F(11)/MeOH gives higher values (97.0:3.0 (5), 98.6:1.4 (6), 98.0:2.0 (7), >99.3:<0.3 (8)). Reactions of 5-8 with excess NaBO(3) in AcOH yield the corresponding ArI(OAc)(2) species 9-12 (9, 85 % as a 90:10 9/5 mixture; 10, 97 %; 11, 95 %; 12, 93 % as a 95:5 12/8 mixture). These rapidly oxidize 1,4-hydroquinones in MeOH. Subsequent additions of CF(3)C(6)F(11) give liquid biphase systems. Solvent removal from the CF(3)C(6)F(11) phases gives 5-8 in >99-98 % yields, and solvent removal from the MeOH phases gives the quinone products, normally in >99-95 % yields. The recovered compounds 5-8 are easily reoxidized to 9-12 and used again.     

Copolymerization of silyl vinyl ethers with olefins by (alpha-diimine)PdR+

This paper reports that (alpha-diimine)PdMe+ catalyzes the copolymerization of olefins and silyl vinyl ethers. The reactions of (alpha-diimine)PdMe+ (alpha-diimine = (2,6-iPr2-C6H3)N=CMe-CMe=N(2,6-iPr2-C6H3)) with excess vinyl ethers CH2=CHOR (1a-d: R = tBu (a), SiMe3 (b), SiPh3 (c), Ph (d)) in CH2Cl2 at 20 degrees C afford polymers for 1a (rapidly) and 1b (slowly) but not for 1c or 1d. The structures of poly(1a,b) indicate a cationic polymerization mechanism. The reaction of (alpha-diimine)PdMe+ with 1-2 equiv of 1a-d proceeds by sequential C=C pi-complexation to form (alpha-diimine)PdMe(CH2=CHOR)+ (2a-d), 1,2 insertion to form (alpha-diimine)Pd(CH2CHMeOR)+ (3a-d), reversible isomerization to (alpha-diimine)Pd(CMe2OR)+ (4a-d), beta-OR elimination to generate (alpha-diimine)Pd(OR)(CH2=CHMe)+ (not observed), and allylic C-H activation to yield (alpha-diimine)Pd(eta3-C3H5)+ (5) and ROH. The reaction of (alpha-diimine)PdMe+ with 1-hexene/1b and 1-hexene/1c mixtures in CH2Cl2 at 20 degrees C affords copolymers containing up to 20 mol % silyl vinyl ether. The copolymers were purified to be free of any -[CH2CHOSiR3]n- homopolymer. The copolymer structures are similar to that of homopoly(1-hexene) generated under the same conditions. The major comonomer units are CH3CH(OSiR3)CH2-, CH2(OSiR3)CH2- and -CH2CH(OSiR3)CH2-. The 1-hexene/CH2=CHOSiR3 copolymers can be desilylated to give 1-hexene/CH2=CHOH copolymers. The results of control experiments argue against cationic and radical mechanisms for the copolymerization, and an insertion/chain-walking mechanism is proposed.     

含萘（2,6）生色基的合成双分子膜研究

本文首次了报道系列单链、2,6-取代萘刚性生色基的双亲化合物C_nNaph(2,6)C_4N~+(CH_3)_3(n=16,12,7,4),C_(12)Naph(2,6)PO_4~-和C_(12)Naph(2,6)C_4N~+(CH_3)_2CH_2CH_2OH的合成。分别用AEM、~1HNMR和DSC考察了该系列化合物在稀水溶液中的自组织行为、聚集体内分子运动和物相变化。当n≥7时,该系列双亲化合物在稀水溶液中可自组织形成双分子层结构,亲水基团的种类直接影响双亲分子的自组织形态。     

联苯型[11], [14]和[17]环系氮杂支链套索冠醚的合成

以碳酸钾为缩合剂, 2,2'-二羟基联苯分别与二对甲苯磺酸酯Ⅱa~c, Ⅳb,Ⅵb反应合成尚未见文献报道的联苯型单氮杂冠醚(1~3), 二氮杂冠醚9和11。3,9和11分别用氢溴酸去对甲苯磺酰基得到亚胺型氮杂冠醚4, 10和12。4与溴代烃RBr(R=-(CH2)3CH3, -CH2CH=CH2, -(CH2)7CH3, -(CH2)2O(CH2)2OC4H9)反应分别合成[11]环系氮支套索冠醚(5~8), 12与正溴丁烷反应合成[17]环系氮支冠醚13。以上13种化合物皆为新型未见文献报道, 其结构皆经元素分析, IR, ^1H NMR,MS确证。     

Synthesis, structure, and reactivity of fluorous phosphorus/carbon/phosphorus pincer ligands and metal complexes

Reactions of the diphosphine 1,3-C6H4(CH2PH2)2 and fluorous alkenes H2C=CHR(fn)(R(fn)=(CF2)(n-1)CF3; n = 6, 8) at 75 degrees C in the presence of AIBN give the title ligands 1,3-C6H4(CH2P(CH2CH2R(fn))2)2(3-R(fn)) and byproducts 1,3-C6H4(CH3)(CH2P(CH2CH2R(fn))2)(4-R(fn)) in 1 : 3 to 1 : 5 ratios. Workups give -R(fn) in 4--17% yields. Similar results are obtained photochemically. Reaction of 1,3-C6H4(CH2Br)2 and HP(CH2CH2R(f8))2 (5) at 80 degrees C (neat, 1 : 2 mol ratio) gives instead of simple substitution the metacyclophane [1,3-C6H4(CH2P(CH2CH2R(f8))2 CH2-1,3-C(6)H(4)CH(2)P[lower bond 1 end](CH2CH2R(f8))2C[upper bond 1 end]H2](2+)2Br-, which upon treatment with LiAlH(4) yields 3-R(f8)(20%), 4-R(f8), and other products. Efforts to better access 3-R(f8), either by altering stoichiometry or using various combinations of the phosphine borane (H3B)PH(CH2CH2R(f8))2 and base, are unsuccessful. Reactions of 3-R(fn) with Pd(O2CCF3)2 and [IrCl(COE)2]2(COE=cyclooctene) give the palladium and iridium pincer complexes (2,6,1-C6H3(CH2 P(CH2CH2R(fn))(2)(2)Pd(O2CCF3)(10-R(fn); 80-90%) and (2,6,1-C6H3(CH2P(CH2CH2R(f8))2)2)Ir(Cl)(H)(11-R(f8); 29%), which exhibit CF3C6F(11)/toluene partition coefficients of >96 : <4. The crystal structure of 10-R(f8) shows CH2CH2R(f8) groups with all-anti conformations that extend in parallel above and below the palladium square plane to create fluorous lattice domains. NMR monitoring shows a precursor to 11-R(f8) that is believed to be a COE adduct.     

金属卟啉-聚乙二醇催化烯烃环氧化反应

研究了聚乙二醇在模拟细胞色素P-450酶、CH_2Cl_2-H_2O两相体系中的相转移催化作用;并和季铵盐类相转移催化作用进行了比较。把PEG-400键联到金属卟啉上,进一步考察了连接大分子后对金属卟啉的催化活性及稳定性的影响;同时比较了键联后的聚乙二醇和自由聚乙二醇所起的相转移催化作用;最后,对反应机理进行了讨论。     

Ethylene Oligomerization by (dppe)MCl_2 [M = Fe(II), Co(II),Ni(II)] Complexes/EAO

Transition-metal-catalyzed oligomerzation of ethylene is an important process to provide a-olefins in the C6~C20 range. In recent years, the catalytic behavior of late transition metal complexes containing bi- and tri-dentate ligands for oligomerization of ethylene to a-olefins has attracted much attention. When oligomerization of ethylene catalyzed by nickel diimine and Fe(II), Co(II) 2,6-bis(imino)pyridine catalysts, the oligomers with high average molecular weight were obtained1-5. Eth…