On the effect of catalyst status in the quantitative determination of platinum in Pt-Sn/MgO materials

The development of an analytical method for the determination of platinum in MgO based Pt/Sn catalysts is described. Electrothermal atomic absorption spectroscopy (ETAAS) was chosen because of its high sensitivity and robustness against spectral interferences. All the sources of chemical interferences were statistically analyzed and corrections were adopted for the presence of magnesium oxide support. The effectiveness of different mineralization procedures was critically evaluated as a function of the chemical of the solid catalyst. Microwave digestion allowed recovery of metal of 100% for all the catalysts analyzed and exhibited significant better precision values than other digestion methods, which could nevertheless be utilized under proper conditions in selected cases.     

Determination of lead in fine particulates by slurry sampling electrothermal atomic absorption spectrometry

A simple method for determining lead in fine particulates (PM_2.5) by using electrothermal atomic absorption spectrometry (ETAAS) has been developed. Particulates collected on Nuclepore filter by using a dichotomous sampler were suspended in diluted nitric acid after ultrasonic agitation. The dislodging efficiency is nearly 100% after agitation for 5 min. In order to study the suspension behavior of PM_2.5 in solvents, a Brookhaven ZetaPlus Particle Size Analyzer was used to determine the particle size distribution and suspension behavior of air particulates in the solvent. The pre-digestion and modification effect of nitric acid would be discussed. Palladium was added as a chemical modifier and the temperature program of ETAAS was changed in order to improve the recovery. The slurry was introduced directly into a graphite tube for atomization. The metal content in the sample was determined by the standard addition method. In addition, a conventional acid digestion procedure was applied to verify the efficiency of the slurry sampling method. It offers a quick and efficient alternative method for heavy metal characterization in fine particulates. Received: 2 August 2000 / Revised: 25 October 2000 / Accepted: 28 October 2000     

Application of exploratory data analysis for the characterization of tubular wells of the North of Brazil

Roraima is located in the extreme North of Brazil, in the Western Amazon Region. The groundwater has an important role in the public supply of potable water on the Roraima State. The objective of this work is the application of PCA (Principal Component Analysis) and HCA (Hierarchical Cluster Analysis) for the characterisation of tubular wells of the Roraima State, as regards physical–chemical composition of water. The parameters analyzed in laboratory were the following ones: pH, electric conductivity, Total Hardness, Total Alkalinity, Bicarbonate, Calcium, Potassium, Magnesium, Nitrate, Chloride, Total Iron. The physical–chemical analyses, were carried out during the months of September and October 2000 (winter, period of rains). The laboratory analysis was performed using classical methods (titrimetry and uv–visible spectroscopy), the samples were processed in agreement with the Standard Methods for Examination of Water and Wastewater.The physical–chemical analyses, were accomplished in September and October 2000. In physical–chemical terms, the groundwater samples analyzed do not indicate any restriction to human consumption and the two chemometric methods of exploratory data analysis: PCA and HCA are efficient for the discrimination of bicarbonated (tubular wells locateds in the South of the Roraima State) and not bicarbonated (tubular wells locateds in the North of Roraima) groundwater.     

Determination of silicon in biological samples by ICP-OES after non-oxidative decomposition under alkaline conditions

A non-oxidative alkaline sample digestion procedure using tetramethylammonium hydroxide and a high pressure, microwave assisted autoclave digestion system was developed. The silicon concentrations of the digested samples were measured by inductively coupled axial plasma optical emission spectrometry (ICP-OES). Details of the digestion conditions as well as the optimised instrumental parameters for ICP-OES are described. The method was developed and tested using silicon-spiked ascorbic acid and applied to samples of animal tissue and organs. The total silicon content of two different reference materials, NIST 1577b Bovine liver and BCR 184 Bovine Muscle having neither certified nor informational values for Si was determined. The results obtained are compared with the results of independent methods such as wavelength dispersive x-ray fluorescence spectrometry (WDXRF) and solid sampling electrothermal atomic absorption spectrometry (ETAAS). The method described achieves a limit of detection of 2 mg kg^–1 using 100 mg of solid biological or organic material and covers a concentration range of up to 500 mg kg^–1. Received: 27 October 2000 / Revised: 31 January 2001 / Accepted: 2 February 2001     

Determination of metal additives and bromine in recycled thermoplasts from electronic waste by TXRF analysis

A new method for analysis of metal additives in recycled thermoplasts from electronic waste was developed, based on dissolving the samples in an organic solvent and subsequent analysis of the corresponding solutions or suspensions by total-reflection X-ray fluorescence spectroscopy (TXRF). The procedure proved to be considerably less time consuming than the conventional digestion of the polymer matrix. Additives containing Ti, Zn, Br, Cd, Sn, Sb, and Pb were analyzed in a hundred randomly selected samples from recycling, which provided an overview of the range of elemental concentrations in thermoplasts utilized for consumer electronics. The results were validated independently by instrumental neutron activation analysis (INAA), subsequent regression analysis confirmed the trueness of the chosen approach. Received: 7 February 2000 / Revised: 25 February 2000 / Accepted: 1 March 2000     

Effective way of modeling chemical catalysis: Empirical valence bond picture of role of solvent and catalyst in alkylation reactions

A general methodology for the study of chemical catalysis is presented and demonstrated in a study of Friedel–Crafts‐type alkylation reactions that are constrained to collinear configurations. Ab initio potential energy surfaces in solution and relevant experimental results are used to calibrate general empirical valence bond (EVB) potential surfaces for studies of such reactions. The EVB surfaces allow one to interpolate the ab initio results to studies of the effect of different solvents, substituents, and catalysts on the alkylation reactions. This implicit approach introduces such effects by shifting the diagonal energies of the corresponding resonance structures. Such an EVB/shift approach appears valuable for assessing the effects of different catalysts and solvents on complex chemical reactions. © 2000 John Wiley & Sons, Inc. J Comput Chem 21: 607–625, 2000     

Optimization of digestion methods for sewage sludge using the Plackett-Burman saturated design

The Plackett-Burman saturated factorial design was used to select optimized dissolution conditions for sewage sludge samples. Three different digestion methods were applied: i) microwave oven digestion in a domestic oven with Parr-type reactors; ii) microwave oven digestion with controlled-pressure reactors; iii) pressure bomb reactor heated on a hot plate. The three methods were validated by statistically comparing the metal contents found with the certified ones of the sewage sludge sample (BCR 145R). No significant differences were obtained and the RSD values were lower than 3% in all cases. The metals were determined by flame-AAS. The variables studied were the following: microwave power; digestion time; predigestion; volume of hydrochloric acid; volume of hydrofluoric acid; volume of nitric acid. The operative advantages offered by microwave digestion with controlled-pressure reactors were also considered. Received: 23 July 1997 / Revised: 31 October 1997 / Accepted: 5 November 1997     

Optimization of digestion methods for sewage sludge using the Plackett-Burman saturated design

The Plackett-Burman saturated factorial design was used to select optimized dissolution conditions for sewage sludge samples. Three different digestion methods were applied: i) microwave oven digestion in a domestic oven with Parr-type reactors; ii) microwave oven digestion with controlled-pressure reactors; iii) pressure bomb reactor heated on a hot plate. The three methods were validated by statistically comparing the metal contents found with the certified ones of the sewage sludge sample (BCR 145R). No significant differences were obtained and the RSD values were lower than 3% in all cases. The metals were determined by flame-AAS. The variables studied were the following: microwave power; digestion time; predigestion; volume of hydrochloric acid; volume of hydrofluoric acid; volume of nitric acid. The operative advantages offered by microwave digestion with controlled-pressure reactors were also considered. Received: 23 July 1997 / Revised: 31 October 1997 / Accepted: 5 November 1997     

电感耦合等离子体发射光谱法测定植物油中的磷

用电感耦合等离子体发射光谱法(ICP-AES)测定了植物油中的磷.采用多谱线拟合技术(MSF)校正了铜对P213.617 nm和P214.914 nm光谱干扰.比较了活性炭炭化灰化法和微波消解法两种样品前处理方法对分析结果的影响.结果表明这两种前处理方法所得结果都能与国标磷钼蓝分光光度法的分析结果吻合,其中活性炭炭化灰化法的方法检出限(0.053 mg/kg)较微波消解法的方法检出限(0.42 mg/kg)更低,所以对低含量的磷的检测结果其相对误差及精密度更好.该法应用于植物油中磷的测定.     

Determination of lead in waters and sediments from the wetland Tablas de Daimiel National Park (Spain)

Electrothermal atomic absorption spectrometry (ETAAS) has been used for lead control in waters and sediments of the wetland Tablas de Daimiel National Park. The lead determination in the wetland water is hindered by an enhanced salt content, so matrix interference was evaluated. The use of stabilized temperature platform atomization technique, Zeeman background correction and palladium nitrate as matrix modifier were found advisable. For the sediments a closed-vessel microwave dissolution method has been proposed using a mixture of HCl-HNO₃-HF and a heating time of 90 s. With subsequent ETAAS using platform atomization and Zeeman background correction, no chemical modification was necessary. Using these conditions, the interferences were completely removed for both waters and sediments and the calibration curve in ultrapure water (1% nitric acid) was linear up to 30 μg/L. The detection limits for waters and sediments were 0.95 μg/L and 0.78 μg/g, respectively. The accuracy of the proposed method for sediments was validated by analyzing certified reference materials (obtained values were within the certified ones) and spiked wetland sediments (mean recovery of 99.0%). Received: 11 October 1998 / Revised: 3 December 1998 / Accepted: 11 March 1999     

Determination of lead in waters and sediments from the wetland Tablas de Daimiel National Park (Spain)

Electrothermal atomic absorption spectrometry (ETAAS) has been used for lead control in waters and sediments of the wetland Tablas de Daimiel National Park. The lead determination in the wetland water is hindered by an enhanced salt content, so matrix interference was evaluated. The use of stabilized temperature platform atomization technique, Zeeman background correction and palladium nitrate as matrix modifier were found advisable. For the sediments a closed-vessel microwave dissolution method has been proposed using a mixture of HCl-HNO₃-HF and a heating time of 90 s. With subsequent ETAAS using platform atomization and Zeeman background correction, no chemical modification was necessary. Using these conditions, the interferences were completely removed for both waters and sediments and the calibration curve in ultrapure water (1% nitric acid) was linear up to 30 μg/L. The detection limits for waters and sediments were 0.95 μg/L and 0.78 μg/g, respectively. The accuracy of the proposed method for sediments was validated by analyzing certified reference materials (obtained values were within the certified ones) and spiked wetland sediments (mean recovery of 99.0%). Received: 11 October 1998 / Revised: 3 December 1998 / Accepted: 11 March 1999     

Evaluation of combined measurement uncertainty of the determination of Mn content in sediment samples

Combined uncertainties of an analysis of elemental content of sediment samples were evaluated. A monitoring system has been designed and implemented for the characterization of the environmental conditions of Lake Balaton in Hungary. Sediments samples were collected and an acidic digestion method was used to determine the concentration of elements. For the calculation of the result of each measurement three different approaches were considered, namely a.) the calculation of the result using a calibration curve and estimating the confidence limit by the Student t-distribution, b.) calculation of the combined uncertainty and c.) estimation of the sampling errors using the transport and field blanks. The latter approach gave the most reliable result since it included all the parameters which had to be considered regarding sampling and sample handling, and measurement. Determination of acid soluble Mn content in sediment samples has been chosen as an example, and the combined uncertainty is calculated using blanks for sampling. Received: 17 March 2000 Accepted: 4 October 2000     

Comparison of four microwave digestion methods for the determination of selenium in fish tissue by using hydride generation atomic absorption spectrometry

Four microwave digestion methods of fish tissue for selenium determination by hydride generation atomic absorption spectrometry were compared, in which potassium hexacyanoferrate(III) was chosen as a masking agent for eliminating matrix interferences. The results showed that the methods employing HNO(3)/H(2)O(2), HNO(3)/K(2)S(2)O(8)/H(2)O(2) and HNO(3)/H(3)PO(4)/H(2)O(2) digestion media were unreliable. However, the decomposition using the digestion media of HNO(3)/H(2)SO(4)/H(2)O(2) enabled adequate digestion of fish tissue and retention of selenium in a state amenable for determination. Therefore, the digestion procedures with HNO(3)/H(2)SO(4)/H(2)O(2) media are proposed for the determination of selenium in fish tissue by hydride generation atomic absorption spectrometry. The recoveries of the spiked samples investigated ranged from 90 to 102%. The result obtained from analyzing the NIES CRM No. 6 mussel was in good agreement with the reference value (reference value: 1.5 mug/g; found: 1.45 +/- 0.05 mug/g). The limit of detection for selenium was 0.03 mug/g dry mass for a 100 mg sample. The contents of selenium in local fish species investigated ranged from 0.49 to 2.90 mug/g, and the relative standard deviation for the determination of selenium was less than 8%.     

Simultaneous multi-element analysis of trace elements in soil samples by means of high-resolution inductively coupled plasma sector field mass spectrometry (SF-ICP-MS)

The potential of SF-ICP-MS for trace element analysis in complex environmental matrices such as soil solutions was investigated. Spectral interferences found in mass spectra of soil matrices are presented in detail. Furthermore, the influences of single components of the soil matrix on the signal intensity of selected elements were studied. Detection limits of different elements are presented with respect to the composition of the matrix. A fast and accurate method for quasi-simultaneous determination of Al, Si, P, V, Cr, Mn, Fe, Ni, Co, Cu, Zn, As, Se, Sr, Mo, Cd, Sn, Hg and Pb in aqueous soil extracts was established. Received: 3 January 2000 / Revised: 28 March 2000 / Accepted: 31 March 2000     

Development of a calibration instrument for the dynamic generation of organic vapors

A computer controlled automatic calibration apparatus for the dynamic generation of organic vapors was developed. A calibration loop was filled by diffusion with organic compounds and diluted using nitrogen as a carrier gas. The compound holder pipe was thermostated at 40° C. Fittings were made of PTFE and the valves were constructed of stainless steel. Moisture interferences were reduced using a Nafion membrane filter. The vapor generator was validated by a gas chromatographic method. The measured and calculated values were compared and good correlation (r = 0.9903) was found. Received: 29 October 1996 / Revised: 14 April 1997 / Accepted: 18 April 1997     

Determination of platinum and ruthenium in Pt and Pt-Ru catalysts with carbon support by direct and derivative spectrophotometry

Platinum and ruthenium in carbon supported Pt and Pt-Ru catalysts were determined by direct and derivative spectrophotometric methods. Complexes of platinum and ruthenium with SnCl(3)(-) ligands (tin(II) chloride in HCl) were used to determine both metals in solutions obtained after digestion of the samples of the catalysts. Platinum in the Pt/C catalyst can be determined in solutions obtained by digestion of the samples in aqua regia. Derivative spectrophotometry was used to determine both metals in the presence of each other in solutions obtained after digestion of samples of the Pt-Ru/C catalyst in the mixture of HCl+HNO(3) (6:1). The first derivative at 377 nm (;zero-crossing' point of ruthenium) and the second-derivative values at 495 nm (;zero-crossing' point of platinum) were used to estimate the concentration of platinum and ruthenium, respectively.     

Quality assurance of qualitative analysis in the framework of the European project ’MEQUALAN’

 The European Commission has supported the G6MA-CT-2000–01012 project on ”Metrology of Qualitative Chemical Analysis” (MEQUALAN), which was developed during 2000–2002. The final result is a document produced by a group of scientists with expertise in different areas of chemical analysis, metrology and quality assurance. One important part of this document deals, therefore, with aspects involved in analytical quality assurance of qualitative analysis. This article shows the main conclusions reported in the document referring to the implementation of quality principles in qualitative analysis: traceability, reliability (uncertainty), validation, and internal/external quality control for qualitative methods. Received: 15 October 2002 Accepted: 20 October 2002 This paper is a summary of the Quality Assurance section included in the final report of the MEQUALAN project. The authors of this paper correspond to the members of the MEQUALAN Consortium. One of them (K.H.) does not fully agree with some parts of the text. Correspondence to A. Ríos     

A Study of Two Atomic Absorption Methods for the Determination of Sub-Microgram Amounts of Arsenic and Selenium

Abstract

Two atomic absorption accessory units were studied for the determination of arsenic and selenium in waters. One involves a flame mode while the other a flameless mode. Each was analyzed for requirements in speed per analyses, sample sizes required, potential interferences, coefficients of variation, and in overall ease in use.

Although the flameless mode could determine lower levels of arsenic and selenium than the flame mode, it was hampered by some severe interferences. Advantages of these accessories in their use over conventional wet chemical methods included: speed per analysis, elimination of time-consuming concentration steps, and elimination of using fragile equipment and noxious solvents.     

Study of chemical modifiers for the determination of chromium in biological materials by tungsten coil electrothermal atomic absorption spectrometry

The determination of Cr in digest solutions of mussels and non-fat milk powder by tungsten coil electrothermal atomic absorption spectrophotometry (TC-ETAAS) is affected by interferences. This study reports a critical evaluation of chemical modifiers that could be employed to correct these interferences. The chemical modifiers tested were: Mg [as Mg(NO₃)₂], Pd [as Pd(NO₃)₂], NH₄NO₃, ascorbic acid, and mixtures of these compounds. The less effective modifier was NH₄NO₃. The best effects, considering thermal stabilization and sensitivity, were obtained in mixtures of ascorbic acid plus Mg. Chromium was determined by TC-ETAAS in certified reference materials of mussels and non-fat milk powder, and results were comparable with those obtained by graphite furnace atomic absorption spectrophotometry (GFAAS). Received: 19 June 1998 / Revised: 11 January 1999 / Accepted: 16 January 1999     

True detection limit of rare earth elements in atomic emission analysis with an arc two-jet plasmatron

The “true detection limit” C_L,true was measured by a method proposed by Boumans et al. for 10 prominent lines of La, Ce, Pr, Nd and Sm, the most abundant rare earth elements (REEs) in geological samples. It is demonstrated how spectral interferences can increase of C_L,true. The spectra were excited in an argon arc plasma jet with evaporation powders of five complex natural samples. The data show that there is a significant increase of C_L,true in real samples containing large concentrations of such elements as Ti, Zr, Cr, Nb, Ta and REEs emitting complex spectra. Received: 17 June 1997 / Revised: 20 October 1997 / Accepted: 26 October 1997