Effect of oxidation of activated carbon on its enrichment efficiency of metal ions: comparison with oxidized and non-oxidized multi-walled carbon nanotubes

The effect of oxidation of activated carbon (AC) with various oxidizing agents (nitric acid, hydrogen peroxide, ammonium persulfate) on preconcentration of metal ions (Cr3+, Mn2+, Pb2+, Cu2+, Cd2+ and Zn2+) from environmental waters prior to their flame atomic absorption spectroscopic analysis was investigated. The highest recoveries and adsorption capacities towards metal ions were achieved when using nitric acid-oxidized AC (sorbent AC-NA) as preconcentrating sorbent at pH 9. A preconcentration procedure was optimized using AC-NA as sorbent, which was then compared with non-oxidized AC in terms of analytical performance of the preconcentration method. Higher sensitivity, lower detection limits and wider linear ranges were achieved when AC-NA was used. The analytical performance of the method using AC-NA as preconcentrating sorbent was also compared with nitric acid-oxidized multi-walled carbon nanotubes (sorbent MWCNT-NA) and non-oxidized multi-walled carbon nanotubes (sorbent MWCNT). The analytical performance of the preconcentration method using AC-NA was close to MWCNT-NA, but AC-NA was better than non-oxidized MWCNT. Application of the optimized preconcentration method (using AC-NA sorbent) to environmental waters (tap water, reservoir water, stream water) gave spike recoveries of the metals in the range 63-104%.     

Porous graphitic carbon sorbents in biomedical and environmental applications

This review is written as a privilege of the work of Professor Mietek Jaroniec on surface phenomena, adsorption, chromatographic separations, chemistry of conventional and ordered nanoporous materials. The problems of the porous graphitic carbon (PGC) application in analytical field are presented. Special attention is paid on possibilities of use PGC as a specific sorbent and packing material for selective isolation and analytes enrichment from complex matrices by means of liquid-solid extraction techniques (SPE, SPME, MSPD) and as particular stationary phase in analytical chromatographic columns. Surface and adsorption properties as well as a unique mechanism of retention on porous graphitized carbon sorbents are described. As supplement the examples of application in biomedical and environmental area are added.     

Comparison of the Enrichment Efficiency of Multiwalled Carbon Nanotubes, C18 Silica, and Activated Carbon as the Adsorbents for the Solid Phase Extraction of Atrazine and Simazine in Water Samples

Multiwalled carbon nanotubes with exceptional merits as SPE adsorbents for enrichment of environmental pollutants have absorbed much attention. The goal of this paper was to make a comparison with it and regular adsorbents such as C18 silica and activated carbon in the extraction capacity of atrazine and simazine. The results indicated that multiwalled carbon nanotubes were very suitable for determination of atrazine and simazine because of an enrichment performance similar to that of C18 silica. In contrast, the spiked recovery of simazine was higher than that of atrazine using multiwalled carbon nanotubes as packing material for SPE. However, reverse results were obtained when the extraction was performed with packing of C18 silica. Moreover, as the extraction of simazine was concerned, multiwalled carbon nanotubes were much better than C18 silica. As for the enrichment of atrazine, C18 silica achieved greater extraction factor than multiwalled carbon nanotubes. Activated carbon did not give the expected extraction efficiency because of its large size and blank volume and less active sites for adsorption. All these experimental results indicated that multiwalled carbon nanotubes could be used as a valuable alternative adsorbent for SPE of atrazine and simazine in many real water samples.     

Solid phase extraction and uptake properties of multi-walled carbon nanotubes of different dimensions towards some nitro-phenols and chloro-phenols from water

Equilibrium sorption studies and solid phase extraction (SPE) of various phenols (Phenol (Ph), 2-chlorophenol (2-CP), 3-chlorophenol (3-CP), 4-chlorophenol (4-CP), 2-nitrophenol (2-NP), 4-nitrophenol (4-NP), 2,4-dinitrophenol (2,4-DNP)) on oxidized and raw multi-walled carbon nanotubes (MWCNTs) of various external diameters (10–20, 10–30, 20–40, 40–60 and 60–100?nm) and various lengths (short: 1–2?µm and long: 5–15?µm) were tested. Equilibrium sorption studies showed that 2-NP fits the Langmuir isotherm model (LIM), while the other phenolic compounds fit the Freundlich isotherm model (FIM). There was generally an inverse relation between external diameter of MWCNT and its sorption capacity towards phenolic compounds. Long MWCNT showed higher sorption capacity than short MWCNT. Thus dimensions of MWCNT play a role in retaining the sorbed molecules. Oxidation of MWCNT caused a decrease in sorption capacity of phenolic compounds of lower acidity where hydrophobic interaction is predominant, while it caused an increase in sorption capacity of phenolic compounds of higher acidity where H-bonding is predominant. The dependence of sorption on the acidity of phenols (pK_a values) indicates that the basic groups (pyrone-like groups) on the MWCNT surface play a role in the sorption process. In SPE experiments, it was found that hydrogen peroxide-oxidized MWCNT of external diameter 40–60?nm and length 5–15?µm was the best extractant at pH 6.5 using acetonitrile as eluting solvent. The optimized SPE procedure gave detection limits range: 0.027–0.202?ng?mL^?1 within the studied concentration range (10–100?ng?mL^?1). Application of the optimum SPE method on spiked tap water, reservoir water and stream water gave recovery range of 84.3–100% for 2-CP, 3-CP and 4-CP (%RSD range 2.8–9.2%); while Ph, 2-NP, 4-NP, and 2,4-DNP gave recoveries <67.6%.     

Comparison of multiwalled carbon nanotubes and a conventional absorbent on the enrichment of sulfonylurea herbicides in water samples.

Recently, multiwalled carbon nanotubes (MWCNTs) have been at the center of attention because of their applications in many fields. Efforts to investigate the possibility of MWCNTs as SPE absorbents for the enrichment of environmental pollutants yielded positive results. The goal of the present work was to compare the enrichment power of MWCNTs with that of regular adsorbents, such as C18 silica for SPE of five sulfonylurea herbicides. The results indicated that multiwalled carbon nanotubes were very suitable for the preconcentration of sulfonylurea herbicides in complex water samples, yielding better recoveries. C18 gave a lightly lower enrichment performance, and could not enrich nicosulfuron in complex samples. All of these experimental results indicated that multiwalled carbon nanotubes could be used as a valuable alternative adsorbent for the SPE of sulfonylurea herbicides in many real water samples.     

Preparation of phenothiazine bonded silica gel as sorbents of solid phase extraction and their application for determination of nitrobenzene compounds in environmental water by gas chromatography-mass spectrometry

In this paper, two phenothiazine bonded silica (PTZ-Si) sorbents were prepared and used as sorbents of solid-phase extraction (SPE) for the determination of nitrobenzene compounds in environmental water samples by gas chromatography-mass spectrometry (GC-MS). Different synthesis routes were proposed to obtain high bonded amount of PTZ on the surface of silica gel. PTZ molecule was derived to its amino or acyl chloride derivatives for reacting with isocyanate or amino silane coupling agent, which was further reacted with the surface silanol groups of silica gel to obtain the PTZ-Si sorbents. The resultant PTZ-Si sorbents were characterized by nitrogen sorption porosimetry (NSP), Fourier transform infrared spectroscopy (FT-IR) and elemental analysis (EA) to assure the successful bonding of PTZ on the surface of silica gel. Then the PTZ-Si sorbents were served as SPE sorbents for the enrichment of nitrobenzene compounds. Several parameters affecting the extraction performance were investigated. Under the optimized conditions, the proposed method was applied to the analysis of six nitrobenzene compounds in environmental water samples. Good linearities were obtained for all nitrobenzene compounds with R(2) larger than 0.9958. The limits of detection were found to be in the range of 0.06-0.3 ng/mL. The method recoveries of nitrobenzene compounds spiked in water samples were from 71.4% to 124.3%, with relative standard deviations (RSDs) less than 10.1%.     

MoS2 incorporated carbon allotropes (activated carbon,graphene, MWCNT) as electrodes in symmetric supercapacitors

Symmetric supercapacitor devices were fabricated from MoS₂ incorporated carbon allotropes such as activated carbon (AC)/MoS₂, graphene/MoS₂ and MWCNT/MoS₂. The device performance was evaluated using cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy (EIS). The electrochemical properties of the devices fabricated from carbon allotropes (activated carbon, graphene, MWCNT) were remarkably enhanced to above 50% by the incorporation MoS₂ phases. Out of the three fabricated devices, electrochemical performance of AC/MoS₂ as found to be superior. The specific capacitance and energy density of this device is 216 ​F/g and 6.2 ​Wh/Kg respectively with excellent higher rate capability and longer cyclic durability. The devices fabricated from graphene/MoS₂ and MWCNT/MoS₂ has exhibited a specific capacitance value of 202 ​F/g and 161 ​F/g with an energy density value of 5.68 ​Wh/Kg and 3.95 ​Wh/Kg respectively.     

Hydrophobization and evaluation of absorption capacity of Aloe vera,Opuntia ficus-indica and Gelidium for oil spill cleanup

Natural sorbent materials have practical advantages for the oil spill cleanup, whose advantages are their low-cost, feasibility for real-life applications and environmental adaptability. In this work, absorption capacity was determined for lyophilized aloe, nopal and agar and their composites with silica, Fe₃O₄/polysterene and multi-wall carbon nanotubes (MWCNTs). Freeze-drying was performed in order to preserve the structure and increase the internal volume of sorbents. The structures of lyophilized sorbents and composites were analyzed by scanning electron microscopy (SEM). SEM images for lyophilized sorbents show a tridimensional arrangement formed by plant-derived materials, which allows the oil absorption. The composites keep their tridimensional structure after freeze-drying and composite formation and exhibit coupling between both materials. Absorption capacity of aloe, nopal and agar are 9?g/g, 3?g/g, and 26?g/g, respectively without any pretreatment. Composites with Fe₃O₄/polysterene own capacities of 5.8?g/g, 2.8?g/g, and 14?g/g, respectively. Finally, for MWCNT composites, capacities are 7.8?g/g, 2.9?g/g and 23?g/g. A significant difference of adsorption capacity between lyophilized sorbents and composites is attributed to lyophilized materials absorbing oil, water and other compounds. Meanwhile, for composites the absorption is a more selective process, since the hydrophobization does not allow the absorption of water.     

Determination of estrogens and their metabolites in water using C30 SPE-LC-MS

Triacontyl bonded silica (C(30)) material was applied as solid-phase extraction (SPE) sorbent and an SPE-LC-MS method was established for the determination of eight estrogens and their metabolites in water samples. Compared to commercial C(18) SPE cartridge, the performance of C(30) was evaluated in various important SPE conditions, such as sorbent mass, elution solvent and its volume, loading flow rate, and sample loading volume. The results showed a superior performance of C(30)-C(18) by the shorter treatment time and fewer required elution solvent. In the optimum conditions, the results showed good recoveries (80.5-109.4%), excellent linear relationships (0.02-1 ng/mL, except 2-MeO-E(2)), high precisions (lower than 10.0% RSD for both low and high spiked concentration), and low LODs (1-16 ng/L). Method validation using C(30) packed cartridge was also testified with spiked real water samples, including tap water and river water. Satisfy results demonstrated the feasibility of C(30) SPE to the analysis for real environmental waters.     

Evaluation of graphene as an advantageous adsorbent for solid-phase extraction with chlorophenols as model analytes

Graphene, a novel class of carbon nanostructures, possesses an ultrahigh specific surface area, and thus has great potentials for the use as sorbent materials. We herein demonstrate the use of graphene as a novel adsorbent for solid-phase extraction (SPE). Eight chlorophenols (CPs) as model analytes were extracted on a graphene-packed SPE cartridge, and then eluted with alkaline methanol. The concentrations in the eluate were determined by HPLC with multi-wavelength UV detection. Under the optimized conditions, high sensitivity (detection limits 0.1-0.4 ng/mL) and good reproducibility of CPs (RSDs 2.2-7.7% for run-to-run assays) were achieved. Comparative studies showed that graphene was superior to other adsorbents including C18 silica, graphitic carbon, single- and multi-walled carbon nanotubes for the extraction of CPs. Some other advantages of graphene as SPE adsorbent, such as good compatibility with various organic solvents, good reusability and no impact of sorbent drying, have also been demonstrated. The proposed method was successfully applied to the analysis of tap and river water samples with recoveries ranging from 77.2 to 116.6%. This work not only proposes a useful method for environmental water sample pretreatment, but also reveals great potentials of graphene as an excellent sorbent material in analytical processes.     

A review to recent developments in modification of carbon fiber electrodes

The unique properties of carbon fiber electrodes (CFEs) offer a number of particular advantages for their use in analytical applications. However, some pretreatment is usually necessary for the modification of the carbon surface. One of these methods is enzyme modification, that enzyme reactions in the surface of the electrode can be useful for the certain determinations. Also application of nanoparticles is very useful for modification and gives very interesting responses for the electrode in the determination of various analytes. Electrochemical oxidation of a carbon surface is one of the other methods for modification. With this work the morphology of the surface changes as well as increasing the coverage by various oxygen-containing functional groups. These groups can then interact and bind with other species introduced to the surface. The modification of the surface of carbon fiber electrodes is an interesting topic with many applications in the fields of analytical chemistry, environmental and health science, fuel cell and biofuel cell and many others. In this review article we discussed about the various modification methods for carbon fiber electrodes and applications of these CFEs.     

Disposable screen-printed electrode coupled with recombinant Drosophila melanogaster acetylcholinesterase and multiwalled carbon nanotubes for rapid detection of pesticides

Recombinant Drosophila melanogaster acetylcholinesterase (R-DmAChE), multiwalled carbon nanotubes (MWCNTs), and Prussian blue have been combined for development of a three-electrode biosensor with more rapid responses and higher stability than in our previous study. A new disposable screen-printed electrode (SPE) was developed for rapid detection of organophosphate and carbamate pesticides. After optimization, 10 microg MWCNT and 5 microL enzyme immobilization solution consisting of 0.2% glutaraldehyde, 0.1% Nafion, 0.2% bovine serum albumin, 0.1 g/L MWCNT, and 1.5 mU R-DmAChE were fixed on each of the R-DmAChE/MWCNT SPEs. The LOD of this biosensor was 0.5 microg/L for pesticide standards of dichlorvos (DDV) and carbofuran. The performance of this biosensor was tested for vegetable and water samples at various spiked levels, and good stability and sensitivity were found. The obtained recoveries were from 82.6 to 110.5% for DDV at levels of 0.5-5 microg/L and 73.4 to 118.4% for carbofuran at 1-10 microg/L in lake and sea water samples, demonstrating that the proposed approach is an alternative means for rapid detection of pesticide residues and contaminants in food safety and environmental monitoring.     

Preparation of carbon coated Fe3O4 nanoparticles and their application for solid-phase extraction of polycyclic aromatic hydrocarbons from environmental water samples

The carbon coated Fe₃O₄ nanoparticles (Fe₃O₄/C) were synthesized by a simple hydrothermal reaction and applied as solid-phase extraction (SPE) sorbents to extract trace polycyclic aromatic hydrocarbons (PAHs) from environmental water samples. The Fe₃O₄/C sorbents possess high adsorption capacity and extraction efficiency due to strong adsorption ability of carbon materials and large surface area of nanoparticles, and only 50 mg of sorbents are required to extract PAHs from 1000 mL water samples. The adsorption attains equilibrium rapidly and analytes are eluted with acetonitrile readily. Salinity and solution pH have no obvious effect on the recoveries of PAHs, which avoids fussy adjustment to water sample before extraction. Under optimized conditions, the detection limits of PAHs are in the range of 0.2–0.6 ng L⁻¹. The accuracy of the method was evaluated by the recoveries of spiked samples. Good recoveries (76–110%) with low relative standard deviations from 0.8% to 9.7% are achieved. This new SPE method provides several advantages, such as high extraction efficiency, high breakthrough volumes, convenient extraction procedure, and short analysis times. To our knowledge, this is the first time that Fe₃O₄/C nanoparticles are used for the pretreatment of environmental water samples.     

Use of solid-phase extraction in various of its modalities for sample preparation in the determination of estrogens and progestogens in sediment and water.

The environmental analysis of estrogens and progestogens at physiologically active concentrations (low ng/l range) requires the use of very sensitive and selective methods, which, in most cases, make necessary an extraction/purification step. In this study, various procedures for the determination of several estrogens (estriol, estradiol, ethynyl estradiol, estrone, and diethylstilbestrol) and progestogens (progesterone, norethindrone, and levonorgestrel) in environmental matrices, including water and river sediment, are described. In all procedures, final analysis of the target compounds is performed by reversed-phase liquid chromatography-diode array detection-mass spectrometry, whereas sample preparation always includes a solid-phase extraction (SPE) step. For this SPE step. various types of sorbents, protocols, and devices have been used, and their respective advantages and disadvantages are discussed. For the off-line SPE of estrogens and progestogens from water samples, a syringe type cartridge LiChrolut RP-18 (500 mg) was selected out of two other sorbents--LiChrolut EN (200 mg) and Isolut ENV (500 mg)--for use with the automated sample preparation instrument ASPEC XL. For the on-line SPE and analysis of water samples the 10 mm x 2 mm I.D. HySphere-Resin-GP cartridge, was preferred to the C18 Baker, the PLRP-S, and the Oasis HLB. for use with the Prospekt system. A completely manual protocol based on the use of Sep-Pak C18 Plus cartridges was developed for purification of sediment extracts. All procedures were shown to be linear over a wide range of concentration, exhibited satisfactory repeatability and accuracy, and reached limits of detection usually in the low ng/l and ng/g range. Comparatively, the on-line method was shown to be advantageous in terms of automation and general method performance.     

Comparative assessment of solid-phase extraction clean-up procedures, GC columns and perfluoroacylation reagents for determination of type B trichothecenes in wheat by GC-ECD

Various solid-phase extraction (SPE) procedures for clean-up, two perfluoroacylation reagents (pentafluoropropionic anhydride (PFPA) and heptafluorobutyric anhydride (HFBA)) and two chromatographic columns (HP-1701 and HP-5) have been assessed comparatively to achieve the determination of type B trichothecenes (deoxynivalenol (DON), nivalenol (NIV), 3- and 15-acetyldeoxynivalenol (3- and 15-ADON)) in wheat grain by gas chromatography (GC)-electron-capture detection (ECD). Spiked wheat samples were extracted with acetonitrile-water (84:16, v/v). Tested SPE procedures were MycoSep 225 column, Florisil and different cartridges prepared in the laboratory with mixtures of various sorbents like alumina, Celite 545, C18, silica and charcoal. We propose MycoSep 225 column, and cartridges made with alumina-charcoal-silica and alumina-charcoal-C18 silica mixtures as clean-up procedures on the basis of recovery values (89.6, 87.3 and 86.1% for deoxynivalenol, respectively, at 1.0 mg/kg spiking level). The two last procedures are less expensive. Pentafluoropropionic anhydride was more stable against moisture and less expensive, while recoveries were similar to those obtained with heptafluorobutyric anhydride. HP-1701 column can separate 3- and 15-acetyldeoxynivalenol derivatives while HP-5 cannot, although this last column provided lower bleed and better sensitivity.     

Adsorption and Structural Properties of Mineral–Carbon Sorbents

In the present work an attempt was made to obtain mineral–carbon sorbents by thermal decompositon. The mineral matrix for the sorbents (aluminium hydroxide) was based on petrochemical waste stream containing considerable amounts of aluminium chloride. Reference tests were carried out with a model solution prepared with the use of analytical grade AlCl₃. Atactic polypropylene and hydrocarbon mixtures obtained in the flotation of petrochemical waste waters were used as carbon-containing raw materials. The aim of this work was to determine the adsorption and structural characteristics of the complex sorbents and to check the possibility of evaluation of their hydrophobic-hydrophilic properties. This revised version was published online in August 2006 with corrections to the Cover Date.     

Simultaneous determination of seven pesticides in waters using multi-walled carbon nanotube SPE and NACE

In this work, NACE with UV detection is combined with SPE using multi-walled carbon nanotubes (MWCNT) as stationary phase to determine a group of seven pesticides (pirimicarb, pyrifenox, penconazol, carbendazim, cyromazine, pyrimethanil and cyprodinil) in mineral water samples using ametryn as internal standard. The optimized BGE, consisting of a mixture of MeOH and ACN (1:2 v/v) with 90 mM SDS and 20.5 mM HClO(4), was satisfactory to get a good resolution of the seven compounds in less than 13 min. On-line preconcentration was carried out by electrokinetic injection of the sample dissolved in 78:22 v/v MeOH/ACN, 1.11 mM HClO(4). Repeatability was studied for the same day (n=4), for nine different days (n=36) and for four different capillaries. RSD values were appropriate in all cases, i.e. in the range 4.3-9.4% between different capillaries. MWCNT of 10-15 nm od, 2-6 nm id and 0.1-10 mum length were used as SPE materials for the preconcentration of these pesticides from water samples. SPE parameters influencing the enrichment were optimized and the most favorable conditions were as follows: the amount of stationary phase, eluent, sample pH and sample volume were 40 mg MWCNT, 10 mL ACN and 10 mL dichloromethane containing 5% v/v formic acid, pH 8.0, and 750 mL, respectively. Mean recovery values ranged between 53 and 94% for Milli-Q water and between 47 and 93% for mineral waters (RSD values were in the range 2-16%). The method allowed the determination of these pesticides at concentrations below the maximum residue limits established by the European Union legislation (LOD in the range 27-58 ng/L). When the cost, amount and type of the carbon nanotubes used in this work are compared with those carbon nanotubes previously used in the literature it is clear that the proposed materials can be used as economical stationary phases, even cheaper than conventional SPE cartridges.     

New method for development of carbon clad silica phases for liquid chromatography: Part I. Preparation of carbon phases

Owing to its combination of unique selectivity and mechanical strength, commercial carbon clad zirconia (C/ZrO₂) has been widely used for many applications, including fast two-dimensional liquid chromatography (2DLC). However, the low surface area available (only 20–30 m²/g for commercial porous ZrO₂) limits its retentivity. We have recently addressed this limitation by developing a carbon phase coated on the high surface area of HPLC grade alumina (C/Al₂O₃). This material provides higher retentivity and comparable selectivity, but its use is still limited by how few HPLC quality types of alumina particles (e.g., particle size, surface area, and pore size) are available. In this work, we have developed useful carbon phases on silica particles, which are available in various particle sizes, pore sizes and forms of HPLC grade. To make the carbon phase on silica, we first treat the silica surface with a monolayer or less of metal cations that bind to deprotonated silanols to provide catalytic sites for carbon deposition. After Al (III) treatment, a carbon phase is formed on the silica surface by chemical vapor deposition at 700 °C using hexane as the carbon source. The amount of Al (III) on the surface was varied to assess its effect on carbon deposition, and the carbon loading was varied at different Al (III) levels to assess its effect on the chromatographic properties of the various carbon adsorbents. We observed that use of a concentration of Al (III) corresponding to a full monolayer leads to the most uniform carbon coating. A carbon coating sufficient to cover all the Al (III) sites, required about 4–5 monolayers in this work, provided the best chromatographic performance. The resulting carbon phases behave as reversed phases with reasonable efficiency (50,000–79,000 plates/m) for non-aromatic test species.     

Application of multiwalled carbon nanotubes for solid-phase extraction of organophosphate pesticide

Multiwalled carbon nanotube (MWCNT) was developed as a new sorbent for solid-phase extraction (SPE) of organophosphate (OP) pesticides. A combination of SPE with square-wave voltammetric (SWV) analysis resulted in a fast, sensitive, and selective electrochemical method for determination of OP pesticide using methyl parathion (MP) as a representative. Because of the strong affinity of MWCNT for phosphoric group, nitroaromatic OP compounds can strongly bind to the MWCNT surface. The macroporosity and heterogeneity of MWCNT allow extracting a large amount of MP less than 5 min. The stripping response was highly linear over the MP range of 0.05–2.0 μg/mL, with a detection limit of 0.005 μg/mL. The determination of MP in garlic samples showed acceptable accuracy. The fast extraction ability of MWCNT makes it promising sorbent for various solid-phase extractions.     

Determination of Non-Steroidal Anti-Inflammatory Drugs in Natural Waters Using Off-Line and On-Line SPE Followed by LC Coupled with DAD-MS

Two different procedures for simultaneous determination of six NSAIDs (diflunisal, diclofenac, fenoprofen, ibuprofen, naproxen and tolmetin) in environmental waters are described. Final analysis of target compounds is performed by reversed-phase liquid chromatography – diode array detection and mass spectrometry (HPLC-DAD and LC-MS), whereas sample preparation is based on solid-phase extraction (SPE). A variety of sorbents and their respective advantages and disadvantages are discussed. For the off-line SPE of NSAIDs from water samples, a LiChrolut RP-18 was selected out of all investigated sorbents. In case of on-line coupling of SPE with chromatographic system LiChrosphere RP-18 was selected as the best one in terms of recovery of NSAIDs evaluated, RSD and availability. The applicability of the method was also evaluated. Method detection limits were in the range of 0.7−94 ng L⁻¹. Recoveries ranged from 96 to 109% and relative standard deviations were lower than 5%. The procedures were shown to be linear over a wide range of concentration, exhibited satisfactory repeatability and accuracy, and reached limits of detection in the low ng L⁻¹ range. No breakthrough volume was observed neither for off-line SPE (in the studied range of 100, 200, 300, 500, 700, 1000 and 2000 mL of tap water sample) nor for on-line SPE (in the wide range of 10 mL, 20 mL, 30 mL, 50 mL, 70 mL, 100 mL and 200 mL of tap water sample).