基于绿色氢科学理念构筑从低碳制氢到高效储氢的氢能体系

本文从低碳制氢和高效储氢的角度思考及探讨氢能体系绿色化发展过程中的关键科学问题.提出＂绿色氢科学＂理念与＂低碳制氢,高效储氢＂技术发展路线图,以期通过相关科学问题的认识,来构建具有高度原子经济性及可持续性的绿色氢能体系.     

Metal-Organic Frameworks for Hydrogen Energy Applications: Advances and Challenges

Hydrogen is in limelight as an environmental benign alternative to fossil fuels from few decades. To bring the concept of hydrogen economy from academic labs to real world certain challenges need to be addressed in the areas of hydrogen production, storage, and its use in fuel cells. Crystalline metal-organic frameworks (MOFs) with unprecedented surface areas are considered as potential materials for addressing the challenges in each of these three areas. MOFs combine the diverse chemistry of molecular linkers with their ability to coordinate to metal ions and clusters. The unabated flurry of research using MOFs in the context of hydrogen energy related activities in the past decade demonstrates the versatility of this class of materials. In the present review, we discuss major strategical advances that have taken place in the field of “hydrogen economy and MOFs” and point out issues requiring further attention.     

原子间的另一种作用力——氢键

从氢键定义的延伸、键能大小及其共价性质的表现，认为氢键内容的发展已经可以将之称为"原子间的另一种作用力"。在此基础上，尝试推动氢键教学内容的改革，这样不但可以丰富基础无机化学中"氢键"的内容，而且可以有效增进学生从基础课教学提高科学研究的意识。     

Studies on hydrogen ferrite phase in γ-Fe2O3 synthesised from ferrous fumarate half hydrate precursor

Thermal techniques viz., TG/DTA/DSC methods have been employed in understanding the formation and decomposition of hydrogen ferrite phase (H-F) as a metastable intermediate in the conversion of -Fe₂O₃·xH₂O, to -Fe₂O₃. Magnetic hysteresis measurements carried out at liquid N₂ and at room temperature for the vacancy ordered -Fe₂O₃ and its H-F phase also supplement these studies.The author thanks prof. M.R. Udpa, IIT, Madras for supplying TG/DTA data on Stanton Redcroft Instrument and to the Head, Department of Chemistry, S.P. University, Vallabh Vidyanagar for providing the facilities.     

A Dimer of Hydrogen Cyanide Stabilized by a Lewis Acid

A highly labile dimer of hydrogen cyanide, HCN???HCN, was extracted from liquid HCN by adduct formation with the bulky Lewis acid B(C₆F₅)₃, affording HCN???HCN?B(C₆F₅)₃, which was fully characterized. The influence of the solvent (HCN, CH₂Cl₂, and aromatic hydrocarbons) on the crystallization process was studied, revealing dimer formation when using HCN or CH₂Cl₂ as solvent, whereas aromatic hydrocarbons led to the formation of monomeric arene??HCN?B(C₆F₅)₃ adducts, additionally stabilized by η⁶‐coordination of the aromatic ring system similar to well‐known half‐sandwich complexes.     

Ml(NiCuAlZn)5储氢合金粉末的包覆处理

镍氢电池;Ml(NiCuAlZn)5储氢合金粉末的包覆处理     

催化剂Ni/Y2O3上低温乙醇水蒸气重整制氢研究——氢气预还原对催化剂性能的影响

用浸渍－热分解－氢还原法(IHDHR)和浸渍－热分解法(IHD)分别制备了两种纳米尺寸的Ni/Y2O3催化剂，并应用X-光电子能谱、X-射线衍射、BET比表面测试等分析技术对两种催化剂的结构进行了表征和比较。采用固定床反应器对两种催化剂的催化性能进行实验测试。结果表明，氢气预还原与否对该纳米Ni/Y2O3催化剂的催化性能有一定的影响，经过氢气预还原的催化剂对低温乙醇水蒸气重整反应表现出较高的活性和稳定性，250?℃时，乙醇的转化率达到81.9%；320 ℃时，乙醇的转化率达到95.3%，对氢气的选择性为53.6%。对经过氢预还原的Ni/Y2O3催化剂进行了60 h的稳定性测试。     

Three-dimensional triazenido layers attained through classical and non-classical hydrogen interactions and its coordination to palladium under prolific occurrence of bifurcated hydrogen bonding

The new ligand 1,3-bis(3-methoxy-4-methylbenzoate) triazene (1, bmmbt), and the already known ligand 1,3-bis(4-acetylphenyl)triazene (bapht), yield the two new palladium(II) complexes [(bmmbt)Pd(PPh₃)₂Cl]·DMSO (2) and [(bapht)Pd(PPh₃)₂Cl] (3) (Ph = phenyl; DMSO = dimethylsulfoxide). Compound 1 shows the existence of more than one interaction promoting the coupling between the triazene chains. Other remarkable types of interactions in 1 are bifurcated hydrogen contacts and non-classical CH···π bonding. Complexes 2 and 3 present a planar geometry, supported also through bifurcated intramolecular Cl···H-C interactions, as well as the occurrence of trifurcated Cl···H-C intermolecular interactions.     

Reconsideration on hydrogen bond strengthening or cleavage of photoexcited coumarin 102 in aqueous solvent: a DFT/TDDFT study

In this work, the excited-state hydrogen bonding dynamics of photoexcited coumarin 102 in aqueous solvent is reconsidered. The electronically excited states of the hydrogen bonded complexes formed by coumarin 102 (C102) chromophore and the hydrogen donating water solvent have been investigated using the time-dependent density functional theory method. Two intermolecular hydrogen bonds between C102 and water molecules are considered. The previous works (Wells et al., J Phys Chem A 2008, 112, 2511) have proposed that one intermolecular hydrogen bond would be strengthened and the other one would be cleaved upon photoexcitation to the electronically excited states. However, our theoretical calculations have demonstrated that both the two intermolecular hydrogen bonds between C102 solute and H(2)O solvent molecules are significantly strengthened in electronically excited states by comparison with those in ground state. Hence, we have confirmed again that intermolecular hydrogen bonds between C102 chromophore and aqueous solvents are strengthened not cleaved upon electronic excitation, which is in accordance with Zhao's works.     

Unexpected beauty and diversity in the structures of three homologous 4,5‐dialkoxy‐1‐ethynyl‐2‐nitrobenzenes: the subtle interplay between intermolecular C—H…O hydrogen bonds and alkyl chain length

The synthesis, ¹H and ¹³C NMR spectra, and X‐ray structures are described for three dialkoxy ethynylnitrobenzenes that differ only in the length of the alkoxy chain, namely 1‐ethynyl‐2‐nitro‐4,5‐dipropoxybenzene, C₁₄H₁₇NO₄, 1,2‐dibutoxy‐4‐ethynyl‐5‐nitrobenzene, C₁₆H₂₁NO₄, and 1‐ethynyl‐2‐nitro‐4,5‐dipentoxybenzene, C₁₈H₂₅NO₄. Despite the subtle changes in molecular structure, the crystal structures of the three compounds display great diversity. Thus, 1‐ethynyl‐2‐nitro‐4,5‐dipropoxybenzene crystallizes in the trigonal crystal system in the space group , with Z = 18, 1,2‐dibutoxy‐4‐ethynyl‐5‐nitrobenzene crystallizes in the monoclinic crystal system in the space group P 2₁/c , with Z = 4, and 1‐ethynyl‐2‐nitro‐4,5‐dipentoxybenzene crystallizes in the triclinic crystal system in the space group , with Z = 2. The crystal structure of 1‐ethynyl‐2‐nitro‐4,5‐dipropoxybenzene is dominated by planar hexamers formed by a bifurcated alkoxy sp‐C—H…O,O′ interaction, while the structure of the dibutoxy analogue is dominated by planar ribbons of molecules linked by a similar bifurcated alkoxy sp‐C—H…O,O′ interaction. In contrast, the dipentoxy analogue forms ribbons of molecules alternately connected by a self‐complementary sp‐C—H…O₂N interaction and a self‐complementary sp²‐C—H…O₂N interaction. Disordered solvent was included in the crystals of 1‐ethynyl‐2‐nitro‐4,5‐dipropoxybenzene and its contribution was removed during refinement.     

Metal‐Borohydride‐Modified Zr(BH4)4⋅8 NH3: Low‐Temperature Dehydrogenation Yielding Highly Pure Hydrogen

Due to its high hydrogen density (14.8 wt %) and low dehydrogenation peak temperature (130 °C), Zr(BH₄)₄ ? 8 NH₃ is considered to be one of the most promising hydrogen‐storage materials. To further decrease its dehydrogenation temperature and suppress its ammonia release, a strategy of introducing LiBH₄ and Mg(BH₄)₂ was applied to this system. Zr(BH₄)₄ ? 8 NH₃–4 LiBH₄ and Zr(BH₄)₄ ? 8 NH₃–2 Mg(BH₄)₂ composites showed main dehydrogenation peaks centered at 81 and 106 °C as well as high hydrogen purities of 99.3 and 99.8 mol % H₂, respectively. Isothermal measurements showed that 6.6 wt % (within 60 min) and 5.5 wt % (within 360 min) of hydrogen were released at 100 °C from Zr(BH₄)₄ ? 8 NH₃–4 LiBH₄ and Zr(BH₄)₄ ? 8 NH₃–2 Mg(BH₄)₂, respectively. The lower dehydrogenation temperatures and improved hydrogen purities could be attributed to the formation of the diammoniate of diborane for Zr(BH₄)₄ ? 8 NH₃–4 LiBH₄, and the partial transfer of NH₃ groups from Zr(BH₄)₄ ? 8 NH₃ to Mg(BH₄)₂ for Zr(BH₄)₄ ? 8 NH₃–2 Mg(BH₄)₂, which result in balanced numbers of BH₄ and NH₃ groups and a more active H^δ+ ??? ^?δH interaction. These advanced dehydrogenation properties make these two composites promising candidates as hydrogen‐storage materials.     

Chemical and Physical Solutions for Hydrogen Storage

Hydrogen is a promising energy carrier in future energy systems. However, storage of hydrogen is a substantial challenge, especially for applications in vehicles with fuel cells that use proton‐exchange membranes (PEMs). Different methods for hydrogen storage are discussed, including high‐pressure and cryogenic‐liquid storage, adsorptive storage on high‐surface‐area adsorbents, chemical storage in metal hydrides and complex hydrides, and storage in boranes. For the latter chemical solutions, reversible options and hydrolytic release of hydrogen with off‐board regeneration are both possible. Reforming of liquid hydrogen‐containing compounds is also a possible means of hydrogen generation. The advantages and disadvantages of the different systems are compared.     

Breaking the Passivation: Sodium Borohydride Synthesis by Reacting Hydrated Borax with Aluminum

A significant obstacle in the large-scale applications of sodium borohydride (NaBH₄) for hydrogen storage is its high cost. Herein, we report a new method to synthesize NaBH₄ by ball milling hydrated sodium tetraborate (Na₂B₄O₇ ⋅ 10H₂O) with low-cost Al or Al₈₈Si₁₂, instead of Na, Mg or Ca. An effective strategy is developed to facilitate mass transfer during the reaction by introducing NaH to enable the formation of NaAlO₂ instead of dense Al₂O₃ on Al surface, and by using Si as a milling additive to prevent agglomeration and also break up passivation layers. Another advantage of this process is that hydrogen in Na₂B₄O₇ ⋅ 10H₂O serves as a hydrogen source for NaBH₄ generation. Considering the low cost of the starting materials and simplicity in operation, our studies demonstrate the potential of producing NaBH₄ in a more economical way than the commercial process.     

Closing the Loop for Hydrogen Storage: Facile Regeneration of NaBH4 from its Hydrolytic Product

Sodium borohydride (NaBH₄) is among the most studied hydrogen storage materials because it is able to deliver high‐purity H₂ at room temperature with controllable kinetics via hydrolysis; however, its regeneration from the hydrolytic product has been challenging. Now, a facile method is reported to regenerate NaBH₄ with high yield and low costs. The hydrolytic product NaBO₂ in aqueous solution reacts with CO₂, forming Na₂B₄O₇?10 H₂O and Na₂CO₃, both of which are ball‐milled with Mg under ambient conditions to form NaBH₄ in high yield (close to 80 %). Compared with previous studies, this approach avoids expensive reducing agents such as MgH₂, bypasses the energy‐intensive dehydration procedure to remove water from Na₂B₄O₇?10 H₂O, and does not require high‐pressure H₂ gas, therefore leading to much reduced costs. This method is expected to effectively close the loop of NaBH₄ regeneration and hydrolysis, enabling a wide deployment of NaBH₄ for hydrogen storage.     

气-固相光催化分解硫化氢制氢

利用气-固相反应初步考察了几种常用半导体光催化剂在无氧条件下分解硫化氢产氢的活性.在研究的TiO2,CdS,ZnS,ZnO和ZnIn2S4等催化剂中,ZnS具有较高的光催化产氢活性.在ZnS上担载贵金属Ir可明显提高产氢速率,在ZnS制     

紫外光分解硫化氢制氢的研究

以10W低压汞灯(特征谱线波长,λ=253.7nm,简称UVC)作为光源,硫化钠的水溶液作为反应介质,进行了UVC直接分解硫化氢制氢反应(简称UVC-H₂S-H₂)的研究.考察了反应介质中硫的存在形式、硫化钠的浓度、反应介质pH值以及连续通入硫化氢的流量等反应条件对UVC-H₂S-H₂的影响.实验结果表明,UVC可以在无催化剂条件下直接分解硫化氢制氢.当以0.6mol/L硫化钠水溶液为反应介质,以25mL/h流量连续向反应介质中通入硫化氢时,UVC-H₂S-H₂产氢速率可达3.0mL/W·h.     

过氧化氢存在下平行催化氢波法测定奥沙普秦

在0.2mol/LKH2PO4-Na2HPO4(pH5.5±0.1)支持电解质中,奥沙普秦产生一催化氢波,峰电位Ep=-1.25V(vs.SCE)。当1×10-2mol/LH2O2存在时,该催化氢波的峰电流增加12倍,峰电位基本不变,产生一较灵敏的平行催化氢波。其二阶导数峰峰电流ip″与奥沙普秦浓度在1.0×10-7~2.6×10-5mol/L范围内呈线性关系(r=0.9995,n=10),检出限为5.0×10-8mol/L。该方法可用于药物制剂中奥沙普秦含量的测定。     

Utilization of Low-grade Iron Ore in Ammonia Decomposition

Due to its cleanliness, fast energy cycle, and convenience of energy conversion, hydrogen has been regarded as the new energy source. Conventional process to produce hydrogen yield large amount of CO as byproduct. Moreover, the hydrogen storage and transportation have become the drawbacks in hydrogen economy. Thus, there has been increased interest in the hydrogen transportation medium as alternatives from the conventional process to produce and transport hydrogen. Ammonia has drawn worldwide attention as the most reliable hydrogen transportation medium. Through the decomposition of ammonia, hydrogen and nitrogen gas were produces as the byproduct without any CO or CO₂ emission. In this experiment, the ore were introduced as the medium for ammonia decomposition. The ore were put into quartz tube reactor and were dehydrated at 400 °C for 1 hour, then hydrogen reduced for 2 hours before and undergone ammonia decomposition at 500-700 °C for 3 hours. The effects of temperature to the % conversion of ammonia decomposition were also studied. Ammonia decomposition at higher temperature gives higher conversion. As seen in the results, the NH₃ conversion decreased with increasing time and the value after 3 hours of reaction increased in the sequence of 500 °C<600 °C< 700 °C. During ammonia decomposition, nitriding of iron occurred. The relation between temperature and the nitriding potential, K_N is also investigated. The purpose of this study is to investigate the utilization of low-grade ore as medium for ammonia decomposition to produce hydrogen.     

Conformers and intramolecular hydrogen bonding of the oxalic acid monomer and its anions

Density functional theory, B3LYP/6‐31G** and B3LYP/6‐311+G(2d,p), and ab initio MP2/6‐31G** calculations have been carried out to investigate the conformers, transition states, and energy barriers of the conformational processes of oxalic acid and its anions. QCISD/6‐31G** geometrical optimization is also performed in the stable forms. Its calculated energy differences between the two most stable conformers are very near to the related observed value at 7.0 kJ/mol. It is found that the structures and relative energies of oxalic acid conformers predicted by these methods show similar results, and that the conformer L1 (C_2h) with the double‐interfunctional‐groups hydrogen bonds is the most stable conformer. The magnitude of hydrogen bond energies depends on the energy differences of various optimized structures. The hydrogen bond energies will be about 32 kJ/mol for interfunctional groups, 17 kJ/mol for weak interfunctional groups, 24 kJ/mol for intra‐COOH in (COOH)₂, and 60 kJ/mol for interfunctional groups in (COOH)COO⁻¹ ion if calculated using the B3LYP/6‐311+G(2d,p) method. © 2000 John Wiley & Sons, Inc. Int J Quant Chem 76: 541–551, 2000     

On the Relationship between Hydrogen Bond Strength and the Formation Energy in Resonance-Assisted Hydrogen Bonds

Resonance-assisted hydrogen bonds (RAHB) are intramolecular contacts that are characterised by being particularly energetic. This fact is often attributed to the delocalisation of π electrons in the system. In the present article, we assess this thesis via the examination of the effect of electron-withdrawing and electron-donating groups, namely −F, −Cl, −Br, −CF₃, −N(CH₃)₂, −OCH₃, −NHCOCH₃ on the strength of the RAHB in malondialdehyde by using the Quantum Theory of Atoms in Molecules (QTAIM) and the Interacting Quantum Atoms (IQA) analyses. We show that the influence of the investigated substituents on the strength of the investigated RAHBs depends largely on its position within the π skeleton. We also examine the relationship between the formation energy of the RAHB and the hydrogen bond interaction energy as defined by the IQA method of wave function analysis. We demonstrate that these substituents can have different effects on the formation and interaction energies, casting doubts regarding the use of different parameters as indicators of the RAHB formation energies. Finally, we also demonstrate how the energy density can offer an estimation of the IQA interaction energy, and therefore of the HB strength, at a reduced computational cost for these important interactions. We expected that the results reported herein will provide a valuable understanding in the assessment of the energetics of RAHB and other intramolecular interactions.