一种基于磁性纳米粒子PCR的高通量SNP分型方法

利用磁性纳米粒子PCR扩增(MNPs-PCR)和等位基因特异性双色荧光探针(Cy3, Cy5)杂交, 建立了一种单核苷酸多态性(SNP)分型的新方法. 应用该方法对9个样本MTHFR基因的C677T多态进行检测, 野生和突变型样本正错配信号比大于9.0, 杂合型正错配信号比接近1.0, 分型结果经测序验证. 此方法无须产物纯化、浓缩, 扫描分型结果快速、直观, 是一种操作简单、快速、高通量、高灵敏度的分型方法.     

Rapid and sensitive DNA target detection using enzyme amplified electrochemical detection based on microchip

A rapid and sensitive DNA targets detection using enzyme amplified electrochemical detection (ED) based on microchip was described. We employed a biotin‐modified DNA, which reacted with avidin‐conjugated horseradish peroxidase (avidin–HRP) to obtain the HRP‐labeled DNA probe and hybridized with its complementary target. After hybridization, the mixture containing dsDNA‐HRP, excess ssDNA‐HRP, and remaining avidin–HRP was separated by MCE. The separations were performed at a separation voltage of +1.6 kV and were completed in less than 100 s. The HRP was used as catalytic labels to catalyze H₂O₂/o‐aminophenol reaction. Target DNA could be detected by the HRP‐catalyzed reduction with ED. With this protocol, the limits of quantification for the hybridization assay of 21‐ and 39‐mer DNA fragments were of 8×10^?12 M and 1.2×10^?11 M, respectively. The proposed method has been applied satisfactorily in the analysis of Escherichia coli genomic DNA. We selected the detection of PCR amplifications from the gene of E. coli to test the real applicability of our method. By using an asymmetric PCR protocol, we obtained ssDNA targets of 148 bp that could be directly hybridized by the single‐stranded probe and detected with ED.     

Rapid genotyping of CYP2D6, CYP2C19 and TPMT polymorphisms by primer extension reaction in a dipstick format

In recent years an increasing amount of interest has been directed at the study and routine testing of polymorphisms responsible for variations in drug metabolism. Most of the current methods involve either time-consuming electrophoresis steps or specialized and expensive equipment. In this context, we have developed a rapid, simple and robust method for genotyping of CYP2D6*3, CYP2D6*4, CYP2C19*2, CYP2C19*3 and TPMT*2 single nucleotide polymorphisms (SNP). Genomic DNA is isolated from whole blood and the segments that span the SNP of interest are amplified by PCR. The products are subjected directly (without purification) to two primer extension (PEXT) reactions (three cycles each) using normal and mutant primers in the presence of biotin-dUTP. The PEXT primers contain a (dA)₃₀ segment at the 5′ end. The PEXT products are detected visually by a dry-reagent dipstick-type assay in which the biotinylated extension products are captured from immobilized streptavidin on the test zone of the strip and detected by hybridization with oligo(dT)-functionalized gold nanoparticles. Patient samples (76 variants in total) were genotyped and the results were fully concordant with those obtained by direct DNA sequencing.     

Genotyping of single nucleotide polymorphisms by primer extension reaction and a dual-analyte bio/chemiluminometric assay

Primer extension reaction (PEXT) is the most widely used approach to genotyping of single nucleotide polymorphisms (SNP). It is based on the high accuracy of nucleotide incorporation by the DNA polymerase. We propose a dual-analyte bio/chemiluminometric method for the simultaneous detection of the PEXT reaction products of the normal and mutant allele in a high sample-throughput format. PCR-amplified DNA fragments that span the SNP of interest are subjected to two PEXT reactions using normal and mutant primers in the presence of digoxigenin-dUTP and biotin-dUTP. Both primers contain a d(A)₃₀ segment at the 5′-end but differ in the final nucleotide at the 3′-end. Under optimized conditions only the primer that is perfectly complementary with the interrogated DNA will be extended by DNA polymerase and lead to a digoxigenin- or biotin-labeled product. The products of the PEXT reactions are mixed, denatured, and captured in microtiter wells through hybridization with immobilized oligo(dT) strands. Detection is performed by adding a mixture of antidigoxigenin–alkaline phosphatase (ALP) conjugate and a streptavidin–aequorin conjugate. The flash-type bioluminescent reaction of aequorin is triggered by the addition of Ca²⁺. ALP is then measured by adding the appropriate chemiluminogenic substrate. The method was evaluated by genotyping two SNPs of the human mannose-binding lectin gene (MBL2) and one SNP of the cytochrome P450 gene CYP2D6. Patient genotypes showed 100% concordance with direct DNA sequencing data.     

Genotyping of single nucleotide polymorphism in MDM2 genes by universal fluorescence primer PCR and capillary electrophoresis

Single nucleotide polymorphism (SNP) 309 in the promoter region of the murine double minute 2 (MDM2) gene plays an important role in human tumorigenesis. We established a simple and effective CE method for SNP detection in the MDM2 gene. We designed one universal fluorescence-based nonhuman-sequence primer and one fragment-oriented primer, which were combined in one tube, and proceeded with the polymerase chain reaction (PCR). The amplicons were analyzed by capillary electrophoresis using single-strand conformation polymorphism method. PCR fragments generated from this two-in-one PCR displayed either T/T or G/G homozygosity or T/G heterozygosity. A total of 304 samples were blindly genotyped using this developed method, which included the DNA from 138 healthy volunteers, 43 chronic myeloid leukemia (CML) patients, and 123 colorectal cancer (CRC) patients. The results were confirmed by DNA sequencing and showed good agreement. The SSCP-CE method was feasible for SNP screening of MDM2 in large populations.     

Detection of an aberrant methylation of CDH4 gene in PCR product by ferrocenylnaphthalene diimide-based electrochemical hybridization assay

Hybridization behavior of 24-meric and 105-meric single stranded DNAs derived from CDH4 gene related to cadherin cell-adhesive protein was tested with 24-meric DNA probe in a ferrocenylnaphthalene diimide (FND)-based hybridization assay. Hybridization efficiency in this system was also clarified using chronocoulometric (CC) measurement with Hexaammineruthenium (III) probe (RuHx). This is first example to calculate hybridization efficiency of PCR product with a DNA probe immobilized on the electrode. Although hybridization efficiency was really small for the PCR product as expected (20% for 105-meric PCR product), PCR products carrying aberrant methylation were discriminated from the wild one due to the electrochemical signal of FND. It was possible since FND possessed high preference for double stranded DNA, especially on the electrode. When applied to aberrant methylation detection for the fragment of CDH4 gene, this system can discriminate over 0.5 ng μL⁻¹ sample DNA, which is superior to bisulfite sequencing or MSP and COBRA assays.     

Electrochemical enzyme-linked immunoassay in a DNA hybridization sensor

In most of the currently developed electrochemical DNA hybridization sensors short single-stranded probe DNA is immobilized on an electrode and both the hybridization and detection steps are carried out on the electrode surface. Here we use a new technology in which DNA hybridization is performed on commercially available magnetic beads and detection on solid electrodes. Paramagnetic Dynabeads Oligo(dT)₂₅ (DBT) with covalently bound (dT)₂₅ probe are used for the hybridization with target DNA containing adenine stretches. Target DNA is modified with osmium tetroxide,2,2′-bipyridine (Os,bipy) and the immunogenic DNA-Os,bipy adduct is determined by the enzyme-linked immunoassay with electrochemical detection. Electroinactive 1-naphthyl phosphate is used as a substrate and the electroactive product (1-naphthol) is measured on the carbon electrodes. Alternatively Os,bipy-modified target DNA can be determined directly by measuring the osmium signal on the pyrolytic graphite electrode (PGE). A comparison between determinations of the 67-mer oligodeoxynucleotide on carbon electrodes using (a) the guanine oxidation signal, (b) direct determination of the DNA-Os,bipy adduct and (c) its electrochemical immunoassay showed immunoassay to be the most sensitive method. In combination with DBT, the DNA hybridization of long target deoxyoligonucleotides (such as 67- and 97-mers) and a DNA PCR product (226-base pairs) have been detected by immunoassay at high sensitivity and specificity.     

Directed Evolution of Penicillium janczewskii zalesk α-Galactosidase Toward Enhanced Activity and Expression in Pichia pastoris

In this study, the activity of an ??-galactosidase obtained from Penicillium janczewskii zalesk was improved via modifying its gene by error-prone PCR and DNA shuffling. The mutated DNA was ligated to pBGP1, an autonomous-replicating vector, which was subsequently transformed into Pichia pastoris X-33. The expressed enzyme activities were measured after single colonies were cultured in yeast?Cpeptone?Cdextrose medium in deep-well plates. After two rounds of screening, two mutants with higher activity were obtained. By PCR analysis, four mutation sites (S167G, P455L, N637S, and P490L/P490H) were found in these two variants (mutant-59 and mutant-8). Mutant-59 showed the highest activity at pH?5.0 and 40?°C with an increased V _max value of 769???mol/min and the specific activity of 667?U/mg against p-nitrophenyl ??-D-galactopyranoside. The two mutant enzymes also showed similar resistance to the metal ions of Cu²⁺, Fe²⁺, and Zn²⁺. In a 10-L fermenter, the supernatant enzyme activity reached the maximum of 550.2?U/mL upon the methanol induction for 96?h. This fermentation activity of the mutant was improved approximately two more folds than the wild type ??-galactosidase. This mutant of ??-galactosidase is prospective in feed manufacturing as feed additives to improve nutrient digestibility in monogastric animals.     

Kinetic capillary electrophoresis-based affinity screening of aptamer clones

DNA aptamers are single stranded DNA (ssDNA) molecules artificially selected from random-sequence DNA libraries for their specific binding to a certain target. DNA aptamers have a number of advantages over antibodies and promise to replace them in both diagnostic and therapeutic applications. The development of DNA aptamers involves three major stages: library enrichment, obtaining individual DNA clones, and the affinity screening of the clones. The purpose of the screening is to obtain the nucleotide sequences of aptamers and the binding parameters of their interaction with the target. Highly efficient approaches have been recently developed for the first two stages, while the third stage remained the rate-limiting one. Here, we introduce a new method for affinity screening of individual DNA aptamer clones. The proposed method amalgamates: (i) aptamer amplification by asymmetric PCR (PCR with a primer ratio different from unity), (ii) analysis of aptamer-target interaction, combining in-capillary mixing of reactants by transverse diffusion of laminar flow profiles (TDLFP) and affinity analysis using kinetic capillary electrophoresis (KCE), and (iii) sequencing of only aptamers with satisfying binding parameters. For the first time we showed that aptamer clones can be directly used in TDLFP/KCE-based affinity analysis without an additional purification step after asymmetric PCR amplification. We also demonstrated that mathematical modeling of TDLFP-based mixing allows for the determination of K_d values for the in-capillary reaction of an aptamer and a target and that the obtained K_d values can be used for the accurate affinity ranking of aptamers. The proposed method does not require the knowledge of aptamer sequences before screening, avoids lengthy (3-5 h) purification steps of aptamer clones, and minimizes reagent consumption to nanoliters.     

Label-free detection of DNA mutations by SPR: application to the early detection of inherited breast cancer

A screening analysis of DNA hybridization and the presence of DNA mutations using an surface plasmon resonance (SPR) biosensor is shown. The influence of lateral and vertical spacers, as well as several hybridization conditions, was studied to optimize the differentiation between fully complementary and mismatched DNA strands. Our results demonstrated that SPR biosensors were able to detect mismatch sequences related to inherited breast cancer, with high specificity and sensitivity. Using PCR synthetic sequences as targets, mutant sequences were clearly discriminated from fully complementary ones, and detection limits below 50 nM were achieved.     

Electrochemical Genoassay Design for Allele‐Specific Detection of Toll‐Like Receptor‐2 Gene Polymorphism

An allele‐specific voltammetric genoassay for the detection of allele‐specific toll‐like receptor‐2 gene arg753gln polymorphism (TLR‐2) from polymerase chain reaction (PCR) amplified real samples was described in this study. Meldola blue (MDB), an intercalator molecule, was used as hybridization label. The wild‐type and mutant type oligonucleotide probes were immobilized onto disposable graphite electrode surfaces by covalent attachment method. The extent of hybridization between probe and target sequences was determined by using differential pulse voltammetry (DPV). As a result of the interaction between MDB and DNA at electrode surface, the MDB signal observed from probe sequence before hybridization and after hybridization with MM sequence is lower than that observed after hybridization with complementary sequence. The differences between the MDB reduction peaks obtained from probe modified, hybrid modified and MM modified electrode were used to detect TLR‐2 from PCR amplified real samples. The discrimination of homozygous and heterozygous alleles was also established by comparing the peak currents of MDB reduction signals. Numerous factors affecting the target hybridization and indicator binding reactions are optimized to maximize the sensitivity.     

A new peptide nucleotide acid biosensor for electrochemical detection of single nucleotide polymorphism in duplex DNA via triplex structure formation

In this paper, we report a new PNA biosensor for electrochemical detection of point mutation or single nucleotide polymorphism (SNP) in p53 gene corresponding oligonucleotide based on PNA/ds-DNA triplex formation following hybridization of PNA probe with double-stranded DNA (ds-DNA) sample without denaturing the ds-DNA into single-stranded DNA (ss-DNA). As p53 gene is mutated in many human tumors, this research is useful for cancer therapy and genomic study. In this approach, methylene blue (MB) is used for electrochemical signal generation and the interaction between MB and oligonucleotides is studied by differential pulse voltammety (DPV). Probe-modified electrode is prepared by self-assembled monolayer (SAM) formation of thiolated PNA molecules on the surface of Au electrode. A significant increase in the reduction signal of MB following hybridization of the probe with the complementary double-stranded oligonucleotide (ds-oligonucleotide) confirms the function of the biosensor. The selectivity of the PNA sensor is investigated by non-complementary ds-oligonucleotides and the results support the ability of the sensor to detect single-base mismatch directly on ds-oligonucleotide. The influence of probe and ds-DNA concentrations on the effective discrimination against complementary sequence and point mutation is studied and the concentration of 10^?6 M is selected as appropriate concentration. Diagnostic performance of the biosensor is described and the detection limit is found to be 4.15 × 10^?12 M.     

Nano Au/TiO2 hollow microsphere membranes for the improved sensitivity of detecting specific DNA sequences related to transgenes in transgenic plants

Gold nanoparticles (nano Au)/titanium dioxide (TiO₂) hollow microsphere membranes were prepared on the carbon paste electrode (CPE) for enhancing the sensitivity of DNA hybridization detection. The immobilization of nano Au and TiO₂ microsphere was investigated with cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The hybridization events were monitored with EIS using [Fe(CN)₆]^3?/4? as indicator. The sequence-specific DNA of the 35S promoter from cauliflower mosaic virus (CaMV35S) gene was detected with this DNA electrochemical sensor. The dynamic detection range was from 1.0×10^?12 to 1.0×10^?8 mol/L DNA and a detection limit of 2.3×10^?13 mol/L could be obtained. The polymerase chain reaction (PCR) amplification of the terminator of nopaline synthase (NOS) gene from the real sample of a kind of transgenic soybean was also satisfactorily detected.     

Approaching real-time molecular diagnostics: single-pair fluorescence resonance energy transfer (spFRET) detection for the analysis of low abundant point mutations in K-ras oncogenes

The aim of this study was to develop new strategies for analyzing molecular signatures of disease states approaching real-time using single pair fluorescence resonance energy transfer (spFRET) to rapidly detect point mutations in unamplified genomic DNA. In addition, the detection process was required to discriminate between normal and mutant (minority) DNAs in heterogeneous populations. The discrimination was carried out using allele-specific primers, which flanked the point mutation in the target gene and were ligated using a thermostable ligase enzyme only when the genomic DNA carried this mutation. The allele-specific primers also carried complementary stem structures with end-labels (donor/acceptor fluorescent dyes, Cy5/Cy5.5, respectively), which formed a molecular beacon following ligation. We coupled ligase detection reaction (LDR) with spFRET to identify a single base mutation in codon 12 of a K-ras oncogene that has high diagnostic value for colorectal cancers. A simple diode laser-based fluorescence system capable of interrogating single fluorescent molecules undergoing FRET was used to detect photon bursts generated from the molecular beacon probes formed upon ligation. LDR-spFRET provided the necessary specificity and sensitivity to detect single-point mutations in as little as 600 copies of human genomic DNA directly without PCR at a level of 1 mutant per 1000 wild type sequences using 20 LDR thermal cycles. We also demonstrate the ability to rapidly discriminate single base differences in the K-ras gene in less than 5 min at a frequency of 1 mutant DNA per 10 normals using only a single LDR thermal cycle of genomic DNA (600 copies). Real-time LDR-spFRET detection of point mutations in the K-ras gene was accomplished in PMMA microfluidic devices using sheath flows.     

Usefulness of microchip electrophoresis for the analysis of mitochondrial DNA in forensic and ancient DNA studies

We evaluate the usefulness of a commercially available microchip CE (MCE) device in different genetic identification studies performed with mitochondrial DNA (mtDNA) targets, including the haplotype analysis of HVR1 and HVR2 and the study of interspecies diversity of cytochrome b (Cyt b) and 16S ribosomal RNA (16S rRNA) mitochondrial genes in forensic and ancient DNA samples. The MCE commercial system tested in this study proved to be a fast and sensitive detection method of length heteroplasmy in cytosine stretches produced by 16 189T>C transitions in HVR1 and by 309.1 and 309.2 C-insertions in HVR2. Moreover, the quantitative analysis of PCR amplicons performed by LIF allowed normalizing the amplicon input in the sequencing reactions, improving the overall quality of sequence data. These quantitative data in combination with the quantification of genomic mtDNA by real-time PCR has been successfully used to evaluate the PCR efficiency and detection limit of full sequencing methods of different mtDNA targets. The quantification of amplicons also provided a method for the rapid evaluation of PCR efficiency of multiplex-PCR versus singleplex-PCR to amplify short HV1 amplicons (around 100 bp) from severely degraded ancient DNA samples. The combination of human-specific (Cyt b) and universal (16S rRNA) mtDNA primer sets in a single PCR reaction followed by MCE detection offers a very rapid and simple screening test to differentiate between human and nonhuman hair forensic samples. This method was also very efficient with degraded DNA templates from forensic hair and bone samples, because of its applicability to detect small amplicon sizes. Future possibilities of MCE in forensic DNA typing, including nuclear STRs and SNP profiling are suggested.     

Electrochemical Detection of Asymmetric PCR Products by Labeling with Osmium Tetroxide

Single stranded DNA‐targets from asymmetric polymerase chain reaction (PCR) of a sequence of the gram positive, spore forming bacterium Clostridium acetobutylicum were detected by square‐wave voltammetry after labeling with osmium tetroxide bipyridine and hybridization with DNA capture probes immobilized on gold electrodes. The asymmetric PCR, performed with a 10‐fold excess of the forward‐primer, was used without any further purification for hybridization with protective strands and covalent labeling with osmium tetroxide bipyridine. Square‐wave voltammetric signals of 20 nmol/L targets were significantly higher at 50 °C compared with 23 °C hybridization temperature. A fully noncomplementary protective strand yielded thoroughly modified targets unable for further hybridization. Coupling this with thermal discrimination opens new opportunities for sequence specific DNA detection.     

Detection of single-base mutation by affinity capillary electrophoresis using a DNA-polyacrylamide conjugate

We have developed an affinity capillary electrophoresis (ACE) method for detection of gene point mutations using a DNA-polyacrylamide conjugate as a pseudostationary affinity phase. In this study, the target DNA was prepared by mixing two PCR products: the wild type of K-ras gene and its codon 12 point mutant. The ligand DNA was designed to be complementary to codons 11 and 12 of the wild type. The target DNA was denatured by the addition of formamide and by heating at 95 degrees C for 5 min, and then electrophoretically separated by difference in affinity to the pseudoimmobilized ligand DNA. The method successfully separated a mixture of the wild-type DNA and each of six codon 12 point mutants by the same ligand DNA. The limit of mutation detection was determined by mixing the wild-type DNA with decreasing concentrations of the mutant DNA. The lowest level of detection was 10% mutant DNA in a background of the wild type. The practicability of this method has been confirmed using a colorectal carcinoma cell line. This study is the first demonstration of detection of gene point mutation in polymerase chain reaction (PCR) products using ACE, and opens up a new possibility of CE-based gene diagnosis.     

Characterization of solution-phase DNA hybridization by fluorescence correlation spectroscopy: Rapid genotyping of C677T from methylenetetrahydrofolate reductase gene

In this paper, fluorescence correlation spectroscopy (FCS) was applied to measure the hybridization fraction of the ssDNA probe with its perfectly matched 146 mer ssDNA and a base mismatched 146 mer ssDNA from human methylenetetrahydrofolate reductase (MTHFR) gene. The ssDNA fragments in this study were obtained by asymmetric PCR techniques. The measurements were performed on a laboratory-built FCS system based on the two components fitting procedure. The obtained results showed that FCS could discriminate the difference of thermal stability between perfectly matched and mismatched DNA duplex, and be used to characterize the genotype of C677T in MTHFR gene. Our data illustrated that FCS was a useful tool for rapid screening of single point genetic mutations/polymorphisms (SNP) combined with DNA hybridization.