Solid-State Structures and Photoluminescence of Lamellar Architectures of Cu(I) and Ag(I) Paddlewheel Clusters with Hydrogen-Bonded Polar Guests

Two hexanuclear paddlewheel-like clusters appending six carboxylic-acid pendants have been isolated with the inclusion of polar solvent guests: [Cu₆(Hmna)₆]·7DMF (1·7DMF) and [Ag₆(Hmna)₆]·8DMSO (2·8DMSO), where H₂mna = 2-mercaptonicotininc acid, DMF = N,N’-dimethylformamide, and DMSO = dimethyl sulfoxide. The solvated clusters, together with their fully desolvated forms 1 and 2, have been characterized by FTIR, UV–Vis diffuse reflectance spectroscopy, TG-DTA analysis, and DFT calculations. Crystal structures of two solvated clusters 1·7DMF and 2·8DMSO have been unambiguously determined by single-crystal X-ray diffraction analysis. Six carboxylic groups appended on the clusters trap solvent guests, DMF or DMSO, through H-bonds. As a result, alternately stacked lamellar architectures comprising of a paddlewheel cluster layer and H-bonded solvent layer are formed. Upon UV illumination (λ_ex = 365 nm), the solvated hexasilver(I) cluster 2·8DMSO gives intense greenish-yellow photoluminescence in the solid state (λ_PL = 545 nm, Φ_PL = 0.17 at 298 K), whereas the solvated hexacopper(I) cluster 1·7DMF displays PL in the near-IR region (λ_PL = 765 nm, Φ_PL = 0.38 at 298 K). Upon complete desolvation, a substantial bleach in the PL intensity (Φ_PL < 0.01) is observed. The desorption–sorption response was studied by the solid-state PL spectroscopy. Non-covalent interactions in the crystal including intermolecular H-bonds, CH⋯π interactions, and π⋯π stack were found to play decisive roles in the creation of the lamellar architectures, small-molecule trap-and-release behavior, and guest-induced luminescence enhancement.     

New Cocrystals of Antipsychotic Drug Aripiprazole: Decreasing the Dissolution through Cocrystallization

Cocrystallization is an important route to tuning the solubility in drugs development, including improving and reducing. Five cocrystals of aripiprazole (ARI) with resveratrol (RSV) and kaempferol (KAE), ARI-RSV, ARI₂-RSV₁·MeOH, ARI-KAE, ARI-KAE·EtOH, ARI-KAE·IPA, were synthesized and characterized. The single crystal of ARI₂-RSV₁·MeOH, ARI-KAE·EtOH, and ARI-KAE·IPA were analyzed by single crystal X-ray diffraction (SCXRD). The SCXRD showed multiple intermolecular interactions between API and the coformers, including hydrogen bond, halogen bond, and π-π interactions. Dissolution rate of the two nonsolvate ARI-RSV and ARI-KAE cocrystals were investigated through powder dissolution experiment in pH = 4.0 acetate buffer and pH = 6.8 phosphate buffer. The result showed that RSV could reduce the dissolution rate and solubility of ARI in both medium through cocrystallization. However, KAE improved the dissolution rate and solubility of ARI in pH = 4.0 medium, on the contrary, the two solubility indicators of ARI were both reduced for ARI-KAE cocrystal.     

Tetrel Bonds between Phenyltrifluorosilane and Dimethyl Sulfoxide: Influence of Basis Sets,Substitution and Competition

Ab initio calculations have been performed for the complexes of DMSO and phenyltrifluorosilane (PTS) and its derivatives with a substituent of NH₃, OCH₃, CH₃, OH, F, CHO, CN, NO₂, and SO₃H. It is necessary to use sufficiently flexible basis sets, such as aug’-cc-pVTZ, to get reliable results for the Si···O tetrel bonds. The tetrel bond in these complexes has been characterized in views of geometries, interaction energies, orbital interactions and topological parameters. The electron-donating group in PTS weakens this interaction and the electron-withdrawing group prominently strengthens it to the point where it exceeds that of the majority of hydrogen bonds. The largest interaction energy occurs in the p-HO₃S-PhSiF₃···DMSO complex, amounting to −122 kJ/mol. The strong Si···O tetrel bond depends to a large extent on the charge transfer from the O lone pair into the empty p orbital of Si, although it has a dominant electrostatic character. For the PTS derivatives of NH₂, OH, CHO and NO₂, the hydrogen bonded complex is favorable to the tetrel bonded complex for the NH₂ and OH derivatives, while the σ-hole interaction prefers the π-hole interaction for the CHO and NO₂ derivatives.     

Correlation of Solubility Thermodynamics of Glibenclamide with Recrystallization and In Vitro Release Profile

The solubility of glibenclamide was evaluated in DMSO, NMP, 1,4-dioxane, PEG 400, Transcutol^® HP, water, and aqueous mixtures (T = 293.15~323.15 K). It was then recrystallized to solvate and compressed into tablets, of which 30-day stability and dissolution was studied. It had a higher solubility in 1,4-dioxane, DMSO, NMP (X_exp = 2.30 × 10³, 3.08 × 10⁴, 2.90 × 10⁴) at 323.15 K, its mixture (X_exp = 1.93 × 10³, 1.89 × 10⁴, 1.58 × 10⁴) at 298.15 K, and 1,4-dioxane (w) + water (1−w) mixture ratio of w = 0.8 (X_exp = 3.74 × 10³) at 323.15 K. Modified Apelblat (RMSD ≤ 0.519) and CNIBS/R-K model (RMSD ≤ 0.358) suggested good comparability with the experimental solubility. The minimum value of ΔG° vs ΔH° at 0.70 < x₂ < 0.80 suggested higher solubility at that molar concentration. Based on the solubility, it was recrystallized into the solvate, which was granulated and compressed into tablets. Among the studied solvates, the tablets of glibenclamide dioxane solvate had a higher initial (95.51%) and 30-day (93.74%) dissolution compared to glibenclamide reference (28.93%). There was no stability issue even after granulation, drying, or at pH 7.4. Thus, glibenclamide dioxane solvate could be an alternative form to improve the molecule’s properties.     

Counterintuitive solvation effect of ionic-liquid/DMSO solvents on acidic C–H dissociation and insight into respective solvation

How would acidic bond dissociation be affected by adding a small quantity of a weakly polar ionic liquid IL (the “apparent” or “measured” dielectric constant ε of the IL is around 10–15) into a strongly polar molecular solvent (e.g., ε of DMSO: 46.5), or vice versa? The answer is blurred, because no previous investigation was reported in this regard. Toward this, we, taking various IL/DMSO mixtures as representatives, have thoroughly investigated the effects of the respective solvent in ionic–molecular binary systems on self-dissociation of C–H acid phenylmalononitrile PhCH(CN)₂via pK_a determination. As disclosed, in this category of binary media, (1) no linear correspondence exists between pK_a and molar fractions of the respective solvent components; (2) only ∼1–2 mol% of weakly polar ILs in strongly polar DMSO make C–H bonds even more dissociative than in neat DMSO; (3) a small fraction of DMSO in ILs (<10 mol%) can dramatically ease acidic C–H-dissociation; and (4) while the DMSO fraction further increases, its acidifying effect becomes much attenuated. These findings, though maybe counterintuitive, have been rationalized on the basis of the precise pK_a measurement of this work in relation to the respective roles of each solvent component in solvation.

The dependence of PhCH(CN)₂ pK_a on the molar fraction of ionic liquids in ionic–molecular binary mixtures showed a nonlinear three-fragment plot, which was rationalized for the first time by the respective roles of each solvent component for solvation.     

Insights into Structure and Biological Activity of Copper(II) and Zinc(II) Complexes with Triazolopyrimidine Ligands

In an attempt to increase the biological activity of the 1,2,4-triazolo[1,5-a]pyrimidine scaffold through complexation with essential metal ions, the complexes trans-[Cu(mptp)₂Cl₂] (1), [Zn(mptp)Cl₂(DMSO)] (2) (mptp: 5-methyl-7-phenyl-1,2,4-triazolo[1,5-a]pyrimidine), [Cu₂(dmtp)₄Cl₄]·2H₂O (3) and [Zn(dmtp)₂Cl₂] (4) (dmtp: 5,7-dimethyl-1,2,4-triazolo[1,5-a]pyrimidine), were synthesized and characterized as new antiproliferative and antimicrobial species. Both complexes (1) and (2) crystallize in the P2₁/n monoclinic space group, with the tetrahedral surroundings generating a square-planar stereochemistry in the Cu(II) complex and a tetrahedral stereochemistry in the Zn(II) species. The mononuclear units are interconnected in a supramolecular network through π–π interactions between the pyrimidine moiety and the phenyl ring in (1) while supramolecular chains resulting from C-H∙∙∙π interactions were observed in (2). All complexes exhibit an antiproliferative effect against B16 tumor cells and improved antibacterial and antifungal activities compared to the free ligands. Complex (3) displays the best antimicrobial activity against all four tested strains, both in the planktonic and biofilm-embedded states, which can be correlated to its stronger DNA-binding and nuclease-activity traits.     

HPLC-DAD Based Polyphenolic Profiling and Evaluation of Pharmacological Attributes of Putranjiva roxburghii Wall.

The current study was intended to explore the phytochemical profiling and therapeutic activities of Putranjiva roxburghii Wall. Crude extracts of different plant parts were subjected to the determination of antioxidant, antimicrobial, antidiabetic, cytotoxic, and protein kinase inhibitory potential by using solvents of varying polarity ranges. Maximum phenolic content was notified in distilled water extracts of the stem (DW-S) and leaf (DW-L) while the highest flavonoid content was obtained in ethyl acetate leaf (EA-L) extract. HPLC-DAD analysis confirmed the presence of various polyphenols, quantified in the range of 0.02 ± 0.36 to 2.05 ± 0.18 μg/mg extract. Maximum DPPH scavenging activity was expressed by methanolic extract of the stem (MeOH-S). The highest antioxidant capacity and reducing power was shown by MeOH-S and leaf methanolic extract (MeOH-L), respectively. Proficient antibacterial activity was shown by EA-L extract against Bacillus subtilis and Escherichia coli. Remarkable α-amylase and α-glucosidase inhibition potential was expressed by ethyl acetate fruit (EA-F) and n-Hexane leaf (nH-L) extracts, respectively. In case of brine shrimp lethality assay, 41.67% of the extracts (LC₅₀ < 50 µg/mL) were considered as extremely cytotoxic. The test extracts also showed mild antifungal and protein kinase inhibition activities. The present study explores the therapeutic potential of P. roxburghii and calls for subsequent studies to isolate new bioactive leads through bioactivity-guided isolation.     

Dinuclear Lanthanide(III) Complexes from the Use of Methyl 2-Pyridyl Ketoxime: Synthetic,Structural, and Physical Studies

The first use of methyl 2-pyridyl ketoxime (mepaoH) in homometallic lanthanide(III) [Ln(III)] chemistry is described. The 1:2 reactions of Ln(NO₃)₃·nH₂O (Ln = Nd, Eu, Gd, Tb, Dy; n = 5, 6) and mepaoH in MeCN have provided access to complexes [Ln₂(O₂CMe)₄(NO₃)₂(mepaoH)₂] (Ln = Nd, 1; Ln = Eu, 2; Ln = Gd, 3; Ln = Tb, 4; Ln = Dy, 5); the acetato ligands derive from the Ln^III—mediated hydrolysis of MeCN. The 1:1 and 1:2 reactions between Dy(O₂CMe)₃·4H₂O and mepaoH in MeOH/MeCN led to the all-acetato complex [Dy₂(O₂CMe)₆(mepaoH)₂] (6). Treatment of 6 with one equivalent of HNO₃ gave 5. The structures of 1, 5, and 6 were solved by single-crystal X-ray crystallography. Elemental analyses and IR spectroscopy provide strong evidence that 2–4 display similar structural characteristics with 1 and 5. The structures of 1–5 consist of dinuclear molecules in which the two Ln^III centers are bridged by two bidentate bridging (η¹:η¹:μ₂) and two chelating-bridging (η¹:η²:μ₂) acetate groups. The Ln^III atoms are each chelated by a N,N’-bidentate mepaoH ligand and a near-symmetrical bidentate nitrato group. The molecular structure of 6 is similar to that of 5, the main difference being the presence of two chelating acetato groups in the former instead of the two chelating nitrato groups in the latter. The geometry of the 9-coordinate Ln^III centers in 1, 5 and 6 can be best described as a muffin-type (MFF-9). The 3D lattices of the isomorphous 1 and 5 are built through H-bonding, π⋯π stacking and C-H⋯π interactions, while the 3D architecture of 6 is stabilized by H bonds. The IR spectra of the complexes are discussed in terms of the coordination modes of the organic and inorganic ligands involved. The Eu(III) complex 2 displays a red, metal-ion centered emission in the solid state; the Tb^III atom in solid 4 emits light in the same region with the ligand. Magnetic susceptibility studies in the 2.0–300 K range reveal weak antiferromagnetic intramolecular Gd^III…Gd^III exchange interactions in 3; the J value is −0.09(1) cm⁻¹ based on the spin Hamiltonian Ĥ = −J(Ŝ_Gd1·Ŝ_Gd2).     

Dissolution of rayon fibers for size exclusion chromatography: a challenge

Application of size exclusion chromatography (SEC) for the analysis of cellulose samples is often limited due to poor solubility in the solvent system N,N-dimethylacetamide/lithium chloride (DMAc/LiCl). Hence different activation or derivatization methods have been developed and published. Most of these methods are laborious, influence the molar mass distribution or do not support dissolution of manmade fibers, such as viscose rayon. In this study, we have evaluated different activation methods for their applicability in viscose rayon dissolution and we present a novel method for activation. We found that an additional solvent exchange step with dimethyl sulfoxide (DMSO) increases and accelerates solubility of viscose fibers in DMAc/LiCl for subsequent SEC analysis. The improved dissolution by DMSO activation is mainly due to increased swelling and improved action towards the outer skin of the fiber. The novel approach has also been applied to the even more difficult dissolution of oxidized viscose fibers.     

Arene Ruthenium(II) Complexes Bearing the κ-P or κ-P,κ-S Ph2P(CH2)3SPh Ligand

Neutral [Ru(η⁶-arene)Cl₂{Ph₂P(CH₂)₃SPh-κP}] (arene = benzene, indane, 1,2,3,4-tetrahydronaphthalene: 2a, 2c and 2d) and cationic [Ru(η⁶-arene)Cl(Ph₂P(CH₂)₃SPh-κP,κS)]X complexes (arene = mesitylene, 1,4-dihydronaphthalene; X = Cl: 3b, 3e; arene = benzene, mesitylene, indane, 1,2,3,4-tetrahydronaphthalene, and 1,4-dihydronaphthalene; X = PF₆: 4a–4e) complexes were prepared and characterized by elemental analysis, IR, ¹H, ¹³C and ³¹P NMR spectroscopy and also by single-crystal X-ray diffraction analyses. The stability of the complexes has been investigated in DMSO. Complexes have been assessed for their cytotoxic activity against 518A2, 8505C, A253, MCF-7 and SW480 cell lines. Generally, complexes exhibited activity in the lower micromolar range; moreover, they are found to be more active than cisplatin. For the most active ruthenium(II) complex, 4b, bearing mesitylene as ligand, the mechanism of action against 8505C cisplatin resistant cell line was determined. Complex 4b induced apoptosis accompanied by caspase activation.     

Cellulose Acetate-g-Polycaprolactone Copolymerization Using Diisocyanate Intermediates and the Effect of Polymer Chain Length on Surface,Thermal, and Antibacterial Properties

The need for biodegradable and biocompatible polymers is growing quickly, particularly in the biomedical and environmental industries. Cellulose acetate, a natural polysaccharide, can be taken from plants and modified with polycaprolactone to improve its characteristics for a number of uses, including biomedical applications and food packaging. Cellulose acetate-g-polycaprolactone was prepared by a three-step reaction: First, polymerization of ε-caprolactone via ring-opening polymerization (ROP) reaction using 2-hydroxyethyl methacrylate (HEMA) and functionalization of polycaprolactone(PCL) by introducing NCO on the hydroxyl end of the HEMA-PCL using hexamethyl lenediisocyanate(HDI) were carried out. Then, the NCO–HEMA-PCL was grafted onto cellulose acetate (using the “grafting to” method). The polycaprolactone grafted cellulose acetate was confirmed by FTIR, the thermal characteristics of the copolymers were investigated by DSC and TGA, and the hydrophobicity was analyzed via water CA measurement. Introducing NCO-PCL to cellulose acetate increased the thermal stability. The contact angle of the unreacted PCL was higher than that of cellulose acetate-g-PCL, and it increased when the chain length increased. The CA-g-PCL50, CA-g-PCL100, and CA-g-PCL200 showed very high inhibition zones for all three bacteria tested (E. coli, S. aureus, and P. aeruginosa).     

Dual effects of dimethylsulfoxide on cellulose solvating ability of 1-allyl-3-methylimidazolium chloride

Polar aprotic solvents are considered to act as cosolvents with ionic liquids (ILs) for cellulose, strengthening the solvating ability of ILs by improving their cellulose solvating kinetics without influencing the solubility of cellulose in ILs. In this work, it was found that dimethylsulfoxide (DMSO) at low concentration improves the cellulose solvating ability of [AMIM][Cl], but weakens it at high concentration. To clarify the mechanism of these dual effects of DMSO on the cellulose solvating ability of [AMIM][Cl], the [AMIM][Cl]/DMSO system was investigated using excess infrared spectroscopy, nuclear magnetic resonance (NMR) T ₂ relaxometry, ¹H NMR, ³⁵Cl NMR, and dynamic light scattering. The results indicate that the tight association between the cation and anion in the [AMIM][Cl] network is loosened at low DMSO concentration. As a result, mass transport is accelerated due to the enhanced dynamics of [AMIM][Cl], promoting the cellulose solvating kinetics of [AMIM][Cl]. However, ion clusters of [AMIM][Cl] start to form when the molar fraction of DMSO (x _DMSO) exceeds 0.5. The hydrogen bonds between cations and anions in the ion clusters become much stronger than in pure [AMIM][Cl], leading to decreased ability of [AMIM][Cl] to form hydrogen bonds with cellulose and thus decreased cellulose solubility in the [AMIM][Cl]/DMSO mixture.     

Proposed Mechanism for the Antitrypanosomal Activity of Quercetin and Myricetin Isolated from Hypericum afrum Lam.: Phytochemistry,In Vitro Testing and Modeling Studies

The in vitro activity of L. donovani (promastigotes, axenic amastigotes and intracellular amastigotes in THP1 cells) and T. brucei, from the fractions obtained from the hydroalcoholic extract of the aerial part of Hypericum afrum and the isolated compounds, has been evaluated. The chloroform, ethyl acetate and n-butanol extracts showed significant antitrypanosomal activity towards T. brucei, with IC₅₀ values of 12.35, 13.53 and 12.93 µg/mL and with IC₉₀ values of 14.94, 19.31 and 18.67 µg/mL, respectively. The phytochemical investigation of the fractions led to the isolation and identification of quercetin (1), myricitrin (2), biapigenin (3), myricetin (4), hyperoside (5), myricetin-3-O-β-d-galactopyranoside (6) and myricetin-3’-O-β-d-glucopyranoside (7). Myricetin-3’-O-β-d-glucopyranoside (7) has been isolated for the first time from this genus. The chemical structures were elucidated by using comprehensive one- and two-dimensional nuclear magnetic resonance (1D and 2D NMR) spectroscopic data, as well as high-resolution electrospray ionization mass spectrometry (HR-ESI–MS). These compounds have also been evaluated for their antiprotozoal activity. Quercetin (1) and myricetin (4) showed noteworthy activity against T. brucei, with IC₅₀ and IC₉₀ values of 7.52 and 5.71 µM, and 9.76 and 7.97 µM, respectively. The T. brucei hexokinase (TbHK1) enzyme was further explored as a potential target of quercetin and myricetin, using molecular modeling studies. This proposed mechanism assists in the exploration of new candidates for novel antitrypanosomal drugs.     

Effect of the Composition of the Water–Dimethyl Sulfoxide Solvent on the Thermodynamics of the Formation of the [Ag(18-Crown-6)]+Complex

The effect of a water–dimethyl sulfoxide solvent (X _DMSO= 0–0.97, where X _DMSOis the mole fraction of DMSO) on the thermodynamics of complexation between Ag⁺and 18-crown-6 and the solvation of all reagents involved in this equilibrium were studied. In aqueous solutions, the complex is stable mainly because of the enthalpy contribution to _r G°. For X _DMSO> 0.3, the contributions from entropy and enthalpy become comparable in magnitude, but they are opposite in sign. In the binary solvent, the complex is most stable at X _DMSO= 0.2 to 0.3. Analysis of the enthalpy characteristics of reagent solvation showed that this solvent effect was due to the superposition of two opposite solvation contributions occurring with an increase in the DMSO concentration in the binary solvent, namely, the destabilization of the ligand solvate sphere and the formation of stable Ag⁺complexes with DMSO.     

Synthesis and Structural Characterization of a Silver(I) Pyrazolato Coordination Polymer

Coinage metal(I)···metal(I) interactions are widely of interest in fields such as supramolecular assembly and unique luminescent properties, etc. Only two types of polynuclear silver(I) pyrazolato complexes have been reported, however, and no detailed spectroscopic characterizations have been reported. An unexpected synthetic method yielded a polynuclear silver(I) complex [Ag(μ-L1Clpz)]_n (L1Clpz⁻ = 4-chloride-3,5-diisopropyl-1-pyrazolate anion) by the reaction of {[Ag(μ-L1Clpz)]₃}₂ with (ⁿBu₄N)[Ag(CN)₂]. The obtained structure was compared with the known hexanuclear silver(I) complex {[Ag(μ-L1Clpz)]₃}₂. The Ag···Ag distances in [Ag(μ-L1Clpz)]_n are slightly shorter than twice Bondi’s van der Waals radius, indicating some Ag···Ag argentophilic interactions. Two Ag–N distances in [Ag(μ-L1Clpz)]_n were found: 2.0760(13) and 2.0716(13) Å, and their N–Ag–N bond angles of 180.00(7)° and 179.83(5)° indicate that each silver(I) ion is coordinated by two pyrazolyl nitrogen atoms with an almost linear coordination. Every five pyrazoles point in the same direction to form a 1-D zig-zag structure. Some spectroscopic properties of [Ag(μ-L1Clpz)]_n in the solid-state are different from those of {[Ag(μ-L1Clpz)]₃}₂ (especially in the absorption and emission spectra), presumably attributable to this zig-zag structure having longer but differently arranged intramolecular Ag···Ag interactions of 3.39171(17) Å. This result clearly demonstrates the different physicochemical properties in the solid-state between 1-D coordination polymer and metalacyclic trinuclear (hexanuclear) or tetranuclear silver(I) pyrazolate complexes.     

Synthesis,Structure, and Photophysical Properties of Yellow-Green and Blue Photoluminescent Dinuclear and Octanuclear Copper(I) Iodide Complexes with a Disilanylene-Bridged Bispyridine Ligand

The synthesis, structural, and photophysical investigations of CuI complexes with a disilanylene-bridged bispyridine ligand 1 are herein presented. Dinuclear (2) and ladder-like (3) octanuclear copper(I) complexes were straightforwardly prepared by exactly controlling the ratio of CuI/ligand 1. Single-crystal X-ray analysis confirmed that dinuclear complex 2 had no apparent π…π stacking whereas octanuclear complex 3 had π…π stacking in the crystal packing. In the solid state, the complexes display yellow-green (λ_em = 519 nm, Φ = 0.60, τ = 11 µs, 2) and blue (λ_em = 478 nm, Φ = 0.04, τ = 2.6 µs, 3) phosphorescence, respectively. The density functional theory calculations validate the differences in their optical properties. The difference in the luminescence efficiency between 2 and 3 is attributed to the presence of π…π stacking and the different luminescence processes.     

Tuning Photophysical Properties by p-Functional Groups in Zn(II) and Cd(II) Complexes with Piperonylic Acid

Aggregation between discrete molecules is an essential factor to prevent aggregation-caused quenching (ACQ). Indeed, functional groups capable of generating strong hydrogen bonds are likely to assemble and cause ACQ and photoinduced electron transfer processes. Thus, it is possible to compare absorption and emission properties by incorporating two ligands with a different bias toward intra- and intermolecular interactions that can induce a specific structural arrangement. In parallel, the π electron-donor or electron-withdrawing character of the functional groups could modify the Highest Ocuppied Molecular Orbital (HOMO)–Lowest Unocuppied Molecular Orbital (LUMO) energy gap. Reactions of M(OAc)₂·2H₂O (M = Zn(II) and Cd(II); OAc = acetate) with 1,3-benzodioxole-5-carboxylic acid (Piperonylic acid, HPip) and 4-acetylpyridine (4-Acpy) or isonicotinamide (Isn) resulted in the formation of four complexes. The elucidation of their crystal structure showed the formation of one paddle-wheel [Zn(μ-Pip)₂(4-Acpy)]₂ (1); a mixture of one dimer and two monomers [Zn(µ-Pip)(Pip)(Isn)₂]₂·2[Zn(Pip)₂(HPip)(Isn)]·2MeOH (2); and two dimers [Cd(μ-Pip)(Pip)(4-Acpy)₂]₂ (3) and [Cd(μ-Pip)(Pip)(Isn)₂]₂·MeOH (4). They exhibit bridged (1, µ₂-η¹:η¹), bridged, chelated and monodentated (2, µ₂-η¹:η¹, µ₁-η¹:η¹ and µ₁-η¹), or simultaneously bridged and chelated (3 and 4, µ₂-η²:η¹) coordination modes. Zn(II) centers accommodate coordination numbers 5 and 6, whereas Cd(II) presents coordination number 7. We have related their photophysical properties and fluorescence quantum yields with their geometric variations and interactions supported by TD-DFT calculations.     

Determination of dimethyl sulfoxide and dimethyl sulfone in urine by gas chromatography–mass spectrometry after preparation using 2,2‐dimethoxypropane

A method for routinely determination of dimethyl sulfoxide (DMSO) and dimethyl sulfone (DMSO₂) in human urine was developed using gas chromatography–mass spectrometry. The urine sample was treated with 2,2‐dimethoxypropane (DMP) and hydrochloric acid for efficient removal of water, which causes degradation of the vacuum level in mass spectrometer and shortens the life‐time of the column. Experimental DMP reaction parameters, such as hydrochloric acid concentration, DMP–urine ratio, reaction temperature and reaction time, were optimized for urine. Hexadeuterated DMSO was used as an internal standard. The recoveries of DMSO and DMSO₂ from urine were 97–104 and 98–116%, respectively. The calibration curves showed linearity in the range of 0.15–54.45 mg/L for DMSO and 0.19–50.10 mg/L for DMSO₂. The limits of detection of DMSO and DMSO₂ were 0.04 and 0.06 mg/L, respectively. The relative standard deviations of intra‐day and inter‐day were 0.2–3.4% for DMSO and 0.4–2.4% for DMSO₂. The proposed method may be useful for the biological monitoring of workers exposed to DMSO in their occupational environment. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and Photophysical Properties of a Series of Dimeric Indium Quinolinates

A novel class of quinolinol-based dimeric indium complexes (1–6) was synthesized and characterized using ¹H and ¹³C(¹H) NMR spectroscopy and elemental analysis. Compounds 1–6 exhibited typical low-energy absorption bands assignable to quinolinol-centered π–π* charge transfer (CT) transition. The emission spectra of 1–6 exhibited slight bathochromic shifts with increasing solvent polarity (p-xylene < tetrahydrofuran (THF) < dichloromethane (DCM)). The emission bands also showed a gradual redshift, with an increase in the electron-donating effect of substituents at the C5 position of the quinoline groups. The absolute emission quantum yields (Φ_PL) of compounds 1 (11.2% in THF and 17.2% in film) and 4 (17.8% in THF and 36.2% in film) with methyl substituents at the C5 position of the quinoline moieties were higher than those of the indium complexes with other substituents.     

Caralluma tuberculata N.E.Br Manifests Extraction Medium Reliant Disparity in Phytochemical and Pharmacological Analysis

Solubility of phytoconstituents depends on the polarity of the extraction medium used, which might result in the different pharmacological responses of extracts. In line with this, ethnomedicinally important food plant (i.e., Caralluma tuberculata extracts) have been made in fourteen distinct solvent systems that were then analyzed phytochemically via total phenolic amount estimation, total flavonoid amount estimation, and HPLC detection and quantification of the selected polyphenols. Test extracts were then subjected to a battery of in vitro assays i.e., antioxidants (DDPH scavenging, antioxidant capacity, and reducing power estimation), antimicrobial (antibacterial, antifungal, and antileishmanial), cytotoxic (brine shrimps, THP-1 human leukemia cell lines and normal lymphocytes), and protein kinase inhibition assays. Maximum phenolic and flavonoid contents were computed in distilled water–acetone and acetone extracts (i.e., 16 ± 1 μg/mg extract and 8 ± 0.4/mg extract, respectively). HPLC-DAD quantified rutin (0.58 µg/mg extract) and gallic acid (0.4 µg/mg extract) in methanol–ethyl acetate and methanol extracts, respectively. Water–acetone extract exhibited the highest DPPH scavenging of 36 ± 1%. Total reducing potential of 76.0 ± 1 μg/mg extract was shown by ethanol chloroform while maximum total antioxidant capacity was depicted by the acetone extract (92.21 ± 0.70 μg/mg extract). Maximal antifungal effect against Mucor sp., antileishmanial, brine shrimp cytotoxicity, THP-1 cell line cytotoxicity, and protein kinase inhibitory activities were shown by ethyl acetate-methanol (MIC: 50 µg/disc), n-hexane (IC₅₀: 120.8 ± 3.7 µg/mL), ethyl acetate (LD₅₀: 29.94 ± 1.6 µg/mL), distilled water–acetone (IC₅₀: 118 ± 3.4 µg/mL) and methanol–chloroform (ZOI: 19 ± 1 mm) extracts, respectively. Our findings show the dependency of phytochemicals and bioactivities on the polarity of the extraction solvent and our preliminary screening suggests the C. tuberculata extract formulations to be tested and used in different ailments, however, detailed studies remain necessary for corroboration with our results.