加肋圆柱壳在轴压作用下的屈曲和后屈曲

本文讨论完善和非完善的,纵向加肋和正交加肋圆柱壳在轴压作用下的屈曲和后屈曲性态.依据文[1]提供的圆柱薄壳屈曲的边界层理论及其分析方法,给出了加肋圆柱壳在轴压作用下的屈曲和后屈曲理论分析.本文同时讨论肋骨与壳板材料不同时对加肋圆柱壳屈曲和后屈曲性态的影响.     

非完善加筋圆柱壳在外压和热荷载共同作用下的后屈曲

基于壳体屈曲的边界层理论,本文给出有限长加筋圆柱壳在侧向外压和均布热荷载共同作用下的后屈曲分析。分析中同时考虑壳体非线性前屈曲变形,大挠度和初始几何缺陷的影响。肋条的处理采用“平均刚度”法。采用奇异摄动方法导得壳体屈曲载荷关系曲线和后屈曲平衡路径,并给出完善和非完善,纵向加筋或环向加筋圆柱壳数值算例。     

Nonlinear response of shear deformable FGM curved panels resting on elastic foundations and subjected to mechanical and thermal loading conditions

This paper presents an analytical investigation on the nonlinear response of thick functionally graded doubly curved shallow panels resting on elastic foundations and subjected to some conditions of mechanical, thermal, and thermomechanical loads. Material properties are assumed to be temperature independent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of constituents. The formulations are based on higher order shear deformation shell theory taking into account geometrical nonlinearity, initial geometrical imperfection and Pasternak type elastic foundation. By applying Galerkin method, explicit relations of load-deflection curves for simply supported curved panels are determined. Effects of material and geometrical properties, in-plane boundary restraint, foundation stiffness and imperfection on the buckling and postbuckling loading capacity of the panels are analyzed and discussed. The novelty of this study results from accounting for higher order transverse shear deformation and panel-foundation interaction in analyzing nonlinear stability of thick functionally graded cylindrical and spherical panels.     

环肋加劲圆柱壳在静水压力作用下的初始后屈曲分析

本文用Koiter理论分析环肋加劲圆柱壳在静水压力作用下的后屈曲性能.前屈曲状态采用与边界条件一致的非线性有矩方程,本征值问题的解用伽辽金方法求出,得到的临界载荷与经典线性解作了比较.具体计算了三种不同环肋参数的外肋加劲圆柱壳.结果表明,肋的强弱不仅显著影响临界载荷值,同时也改变了柱壳的缺陷敏感度.     

Finite element buckling and postbuckling solutions for multilayered composite panels

A study is made of the buckling and postbuckling responses of flat, unstiffened composite panels subjected to various combinations of mechanical and thermal loads. The analysis is based on a first-order shear deformation von Karman-type plate theory. A mixed formulation is used with the fundamental unknowns consisting of the strain components, stress resultants and the generalized displacements of the plate. The stability boundary, postbuckling response and the sensitivity coefficients are evaluated. The sensitivity coefficients measure the sensitivity of the buckling and postbuckling responses to variations in the different lamination and material parameters of the panel. Numerical results are presented for both solid panels and panels with central circular cutouts. The results show the effects of the variations in the fiber orientation angles, aspect ratio of the panel, and the hole diameter (for panels with cutouts) on the stability boundary, postbuckling response and sensitivity coefficients.     

Nonlinear buckling and postbuckling of a shear-deformable anisotropic laminated cylindrical panel under axial compression

The nonlinear buckling and postbuckling of a shear-deformable anisotropic laminated cylindrical panel of finite length is investigated based on a boundary-layer theory for buckling. The layers of the panel are assumed to be linearly elastic. The governing equations are based on Reddy’s higher-order shear deformation theory of shells and include the von Karman-type kinematic nonlinearity and extension/twist, extension/flexure, and flexure/twist couplings. The nonlinear prebuckling deformations and the initial geometric imperfections of the panel are both taken into account. The postbuckling behavior of the panel under axial compression is analyzed. A singular perturbation technique is employed to determine its buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling behavior of perfect and imperfect moderately thick anisotropic laminated cylindrical panels with different geometric parameters and stacking sequences. The new finding reveals that there arises a compressive stress along with an associate shear stress and twisting when a moderately thick anisotropic laminated cylindrical panel is subjected to axial compression.     

热-压电效应对轴压混合层合圆柱曲板后屈曲的影响

基于Karman-Donnell型非线性壳体方程，给出带压电作动器混合层合圆柱曲板在机械荷载、电荷载和热荷载作用下的后屈曲分析．假定温度场为均匀分布，电场仅有沿板厚方向的分量Ez，且假定材料性能常数与温度和电场的变化无关。将壳体屈曲的边界层理论推广到混合层合圆柱曲板受复合荷载作用的情况.相应的奇异摄动法用于确定圆柱曲板的屈曲荷载和后屈曲平衡路径.分析中同时考虑非线性前屈曲变形和初始几何缺陷的影响．数值算例给出完善和非完善，含整体覆盖或内埋压电作动器正交铺设层合圆柱曲板的后屈曲平衡路径。讨论了温度变化、控制电压、铺层方式、面内边界条件和初始几何缺陷等各种参数变化的影响。     

Mechanical stability of functionally graded stiffened cylindrical shells

This paper is concerned with the elastic buckling of stiffened cylindrical shells by rings and stringers made of functionally graded materials subjected to axial compression loading. The shell properties are assumed to vary continuously through the thickness direction. Fundamental relations, the equilibrium and stability equations are derived using the Sander’s assumption. Resulting equations are employed to obtain the closed-form solution for the critical buckling loads. The results show that the inhomogeneity parameter and geometry of shell significantly affect the critical buckling loads. The analytical results are compared and validated using the finite element method.     

复合材料层合剪切圆柱曲板在侧压作用下的后屈曲

基于Reddy高阶剪切变形理论的Kármám-Donnell型非线性壳体方程,给出复合材料层合剪切圆柱曲板在侧压作用下的后屈曲分析。将壳体屈曲的边界层理论推广到复合材料层合剪切圆柱曲板受侧压作用的情况。相应的奇异摄动法,用于确定圆柱曲板的屈曲荷载和后屈曲平衡路径。分析中同时考虑非线性前屈曲变形和初始几何缺陷的影响。数值算例给出完善和非完善,中等厚度正交铺设层合圆柱曲板的后屈曲荷载-挠度曲线。讨论了横向剪切变形,曲板几何参数,铺层数,铺展方式和初始几何缺陷等各种参数变化的影响。     

Postbuckling of a shear-deformable anisotropic laminated cylindrical shell under external pressure in thermal environments

A postbuckling analysis is presented for a shear-deformable anisotropic laminated cylindrical shell of finite length subjected to external pressure in thermal environments. The material properties are expressed as linear functions of temperature. The governing equations are based on Reddy’s higher-order shear-deformation shell theory with the von Karman-Donnell-type kinematic nonlinearity. The nonlinear prebuckling deformations and initial geometric imperfections of the shell are both taken into account. The boundary-layer theory of shell buckling, which includes the effects of nonlinear prebuckling deformations, large deflections in the postbuckling region, and the initial geometric imperfections of the shell, is extended to the case of shear-deformable anisotropic laminated cylindrical shells under lateral or hydrostatic pressure in thermal environments. The singular perturbation technique is employed to determine the interactive buckling loads and postbuckling equilibrium paths. The results obtained show that the variation in temperature, layer setting, and the geometric parameters of such shells have a significant influence on their buckling load and postbuckling behavior. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 43, No. 6, pp. 789–822, November–December, 2007.     

Nonlinear Buckling and Postbuckling of FGM Shear-Deformable Truncated Conical Shells Reinforced by FGM Stiffeners

Mechanics of Composite Materials - In this study, the nonlinear buckling of stiffened FGM truncated conical shells resting on an elastic foundation and subjected to a uniform axial compressive load...     

A general nonlocal nonlinear model for buckling of nanobeams

This study presents a unified model for the nonlocal response of nanobeams in buckling and postbuckling states. The formulation is suitable for the classical Euler–Bernoulli, first-order Timoshenko, and higher-order shear deformation beam theories. The small-scale effect is modeled according to the nonlocal elasticity theory of Eringen. The equations of equilibrium are obtained using the principle of virtual work. The stress resultants are developed taking into account the nonlocal effect. Analytical solutions for the critical buckling load and the amplitude of the static nonlinear response in the postbuckling state are obtained. It is found out that as the nonlocal parameter increases, the critical buckling load reduces and the amplitude of buckling increases. Numerical results showing variation of the critical buckling load and the amplitude of buckling with the nonlocal parameter and the length-to-height ratio for simply supported and clamped–clamped nanobeams are presented.     

中厚板的弹性屈曲和后屈曲

本文采用Reissner假定考虑横向剪切变形的影响,导出弹性矩形板大挠度方程.本文讨论考虑横向剪切变形的矩形板的弹性屈曲和后屈曲.采用文[8]提供的摄动方法,给出了完善和非完善中厚板的后屈曲平衡路径,并与经典薄板理论结果进行了比较.     

流固冲击下加筋板的非线性动态屈曲

分析了流固冲击下加筋板的非线性弹性动态屈曲．考虑板与筋的膜力,忽略面内位移,运用Hamilton变分原理,得出非线性控制方程,采用双级数形式的挠度假设,由Galerkin方法得到离散方程组,根据Budiansky-Roth(B-R)曲线,判断加筋板的动态屈曲．     

湿热环境中复合材料层合圆柱薄壳屈曲和后屈曲

在宏-细观力学模型框架下,讨论湿热环境对复合材料层合圆柱薄壳在轴向压缩作用下屈曲和后屈曲行为的影响。基于细观力学模型复合材料性能与湿度和温度变化有关。壳体控制方程基于经典层合壳理论,并包括湿热效应。壳体屈曲的边界层理论被推广用于湿热环境的情况,相应的奇异摄动法用于确定层合圆柱薄壳的屈曲荷载和后屈曲平衡路径。分析中同时计及壳体非线性前屈曲变形和初始几何缺陷的影响。数值算例给出完善和非完善正交铺设层合圆柱薄壳在不同湿热环境中的后屈曲行为。讨论了温度和湿度,纤维体积比率,壳体几何参数,铺层数,铺层方式和初始几何缺陷等各种参数变化的影响。     

The non-axisymmetric postbuckling behaviour of shallow spherical domes

The non-axisymmetric postbuckling behaviour of an elastic, shallow spherical dome, which is rigidly clamped along its contour and loaded with a uniform transverse pressure, is considered. The solution of the problem is constructed using the Rayleigh-Ritz method based on the Marguerre equations in which the displacements in the circumferential direction are approximated by a Fourier series, and the radial displacements by Bessel functions. The resulting system of non-linear algebraic equations is solved by prolongation methods. It is shown for the first time that a shell has postbuckling, non-axisymmetric equilibrium states with loads which are significantly less than the upper critical load as well as the loads corresponding to bifurcation points. It is suggested that, taking into account the forms of these equilibrium states as the initial inaccuracies of a spherical dome should enable one to model the spread in its experimentally obtained critical loads.     

湿热环境中复合材料层合圆柱薄壳的屈曲和后屈曲

在宏-细观力学模型框架下,讨论湿热环境对复合材料层合圆柱薄壳在轴向压缩作用下屈曲和后屈曲行为的影响.基于细观力学模型复合材料性能与湿度和温度变化有关.壳体控制方程基于经典层合壳理论,并包括湿热效应.壳体屈曲的边界层理论被推广用于湿热环境的情况,相应的奇异摄动法用于确定层合圆柱薄壳的屈曲荷载和后屈曲平衡路径.分析中同时计及壳体非线性前屈曲变形和初始几何缺陷的影响.数值算例给出完善和非完善正交铺设层合圆柱薄壳在不同湿热环境中的后屈曲行为.讨论了温度和湿度,纤维体积比率,壳体几何参数,铺层数,铺层方式和初始几何缺陷等各种参数变化的影响.     

Residual capacities of uniaxially compressed,delaminated composite panels

The mechanical buckling and postbuckling behaviour of a delaminated panel under uniaxial compression is investigated using a semi-analytical geometrically nonlinear panel model. A Rayleigh-Ritz procedure based on trigonometric displacement functions is used in conjunction with minimum energy principles to ascertain the mechanical response of the panels. The model includes the effect of delamination propagation resulting from the buckling of the laminates utilizing a discrete cohesive zone model. With the model developed, a detailed assessment of the residual capacity of the panel is provided due to its capability of tracing the equilibrium paths far into the postbuckling range. (© 2010 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Elastic and inelastic local buckling of stiffened plates subjected to non-uniform compression using the Galerkin method

A solution for the elastic and inelastic local buckling of flat rectangular plates with centerline boundary conditions subjected to non-uniform in-plane compression and shear stress is presented. The loaded edges are simply supported, the longitudinal edges may have any boundary conditions and the centerline is simply supported with a variable rotational stiffness. The Galerkin method, an effective method for solving differential equations, is applied to establish an eigenvalue problem. In order to obtain plate buckling coefficients, combined trigonometric and polynomial functions that satisfy the boundary conditions are used. The method is programmed, and several numerical examples including elastic and inelastic local buckling, are presented to illustrate the scope and efficacy of the procedure. The variation of buckling coefficients with aspect ratio is presented for various stress gradient ratios. The solution is applicable to stiffened plates and the flange of the I-shaped beams that are subjected to biaxial bending or combined flexure and torsion and shear stresses, and is important to estimate the reduction in elastic buckling capacity due to stress gradient.