2,4,6‐trichloropyrimidine. Reaction with anilines

The reaction of 2,4,6‐trichloropyrimidine 1 with a variety of 4‐substituted anilines 2 has been investigated. Monosubstitution occurs readily for all anilines except those containing strongly electron‐withdrawing groups. The yields of the isomeric products 3 and 4 parallel the Hammet constants of the ring substituents. The main product when ethanol was used as the solvent was the 4‐substituted‐2,6‐dichloropyrimidine 3. Spectral and X‐ray data confirmed this assignment. However, a solvent dependence on the 3:4 ratio was demonstrated. In some cases, excess aniline under forcing conditions led to 2,4‐disubstituted products.     

Amination of aromatic olefins with anilines: a new domino synthesis of quinolines

A new catalytic amination of aromatic olefins with anilines is presented. In a domino reaction, substituted quinoline derivatives are obtained in the presence of cationic rhodium complexes, such as [Rh(cod)2]BF4, and PPh3. Ethylbenzene is formed as a by-product in this new oxidative reaction. The first transition metal catalyzed anti-Markovnikov hydroamination of styrene with anilines occurs as a side reaction. Mechanistic investigations strongly support the regioselective oxidative amination of styrene as the key reaction step.     

Copper-Mediated monochlorination of anilines and nitrogen-containing heterocycles

A simple and selective copper(II) chloride-mediated monochlorination of anilines and nitrogen-containing heterocycles has been developed. Stirring a mixture of aniline, copper(II) chloride, lithium chloride in EtOH under reflux condition produced 4-chloroaniline with high yield. Eighteen substrates including substituted anilines, N-substituted anilines, N,N-disubstituted anilines, 5-nitroindole and carbazole were all reactive and afforded desired products in moderate to excellent yields (52%–98%).     

Interaction of dimethyl carbonate with anilines in the presence of potassium methylate: Kinetics and the role of the base

The kinetic patterns of the reaction between dimethyl carbonate and anilines in the presence of a potassium methylate as a catalyst were studied. The mechanism of aminolysis was clarified, which includes the detachment of the proton from the amino group of aniline and the subsequent attack of the resulting anion on the carbonyl group of dimethyl carbonate. It is shown that when the reaction occurs in the dimethyl carbonate-methanol 3:1 system, the process can be described as an irreversible first-order reaction in the aniline though the target reaction is complicated by side interaction between potassium methylate and dimethyl carbonate. The rate constants of the target reaction with substituted anilines and of the side reaction in the temperature range of 70-90°C were determined. It is shown that the influence of the substituent on the reaction rate is described by the Hammett equation, with the constant of the reaction series being positive and the best correlation being achieved for σ-scale. The results obtained are consistent with the proposed mechanism of the reaction and are explained by the facilitation of the aniline deprotonation with increasing acceptor properties of the substituent. Effective activation energies for the reaction of various anilines with dimethyl carbonate are found.     

Reaction of the carbonate radical with substituted anilines

Rate constants for the reaction of carbonate radical with aniline and some parasubstituted anilines have been determined by the flash photolysis technique. Using σ⁺ para values the rate constants at pH 8.5 correlate very well with the Hammett equation yielding ρ= − 1. The carbonate radical oxidises aniline giving the anilino radical. The products so formed have been identified through studies under conditions of continuous irradiation.     

Para-selective gold-catalyzed direct alkynylation of anilines

A method for the para-selective alkynylation of anilines is reported using AuCl as catalyst and triisopropylsilylethynyl-1,2-benziodoxol-3(1H)-one (TIPS-EBX) as an electrophilic acetylene equivalent. Para-alkynyl anilines substituted at positions 2 or 3 were obtained in one step from simple anilines under mild conditions (room temperature to 60 °C) under air. The methodology could also be extended to the alkynylation of trimethoxybenzenes.     

Synthesis of N-[chloro(diorganyl)silyl]anilines

A series of N-[chloro(diorganyl)silyl]anilines RR′Si(NR″Ph)Cl (R, R′ = Me, Ph, CH₂=CH, ClCH₂, Cl(CH₂)₃; R″ = H, Me) was prepared via the reaction of diorganyldichlorosilanes with aniline or N-ethylaniline in the presence of triethylamine.     

Effective metal-free electrooxidative thiocyanation of anilines

An original anodic C–H thiocyanation of anilines with NH₄SCN has been developed, allowing to obtain the products in 88–98% yields under potentiostatic diaphragm electrolysis on glassy carbon electrodes at E_anode = 0.60 V and moderate consumption of electricity. The preliminary voltammetric analysis included the assessment of the changes in the thiocyanate ion curve after the addition of aniline, as well as the measurements of the potentials of the reagents and products, which gave insight into mechanisms of the process (formation of thiocyanate radical and thiocyanogen) and was necessary for its optimization.     

Trifluoromethoxy substituted anilines: metalation as the key step for structural elaboration

Trifluoromethoxy-substituted anilines undergo hydrogen/lithium permutation ("metalation") with optional site selectivity depending on the N-protective group employed. N-tert-Butoxycarbonyl-2- and -4-(trifluoromethoxy)aniline react with tert-butyllithium at the nitrogen-adjacent 6- and 2-position affording, after electrophilic trapping, products 1-6. In contrast, deprotonation of the para isomer occurs at the oxygen-neighboring 3-position, giving rise to the acid 12, when the amino group is carrying two trimethylsilyl groups. sec-Butyllithium attacks 3-trifluoromethoxy-N-mono(trimethylsilyl)aniline at the 2-position, but 3-trifluoromethoxy-N,N-bis(trimethylsilyl)aniline at the 4-position to provide respectively the acids 10 and 11 after carboxylation. The synthesis of two new benzodiazepines illustrates (19 and 22) the preparative potential of the aniline functionalization mediated by organometallic reagents.     

Rhodium-catalyzed decarboxylative cycloaddition route to substituted anilines

A convenient method for preparing substituted anilines via a Rh-catalyzed [2 + 2 + 2] cycloaddition reaction of diynes and 2-oxazolone was discovered. The initial cycloaddition adducts undergo facile decarboxylation of carbon dioxide to afford aniline products. Reaction conditions are mild, and only 3 mol % Rh catalyst is required. High regioselectivity was observed when an unsymmetrical diyne was used as a starting material.     

Iron-promoted tandem reaction of anilines with styrene oxides via C-C cleavage for the synthesis of quinolines

A novel iron-promoted tandem reaction of anilines with styrene oxides via C-C cleavage and C-H activation has been developed. The reaction utilizes an inexpensive FeCl(3) as promoter and is suitable for forming a variety of 3-arylquinolines from the simple and readily available starting materials.     

Selective N-monomethylation of primary anilines with dimethyl carbonate in continuous flow

Selective N-monomethylation of anilines has been achieved under continuous flow conditions using dimethyl carbonate as a green methylating agent in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene. Our methodology takes advantage of the expanded process windows available in the continuous flow regime to safely induce monomethylation in superheated solvents at high pressure. We propose selective N-monomethylation is achieved via an in situ protection-deprotection pathway, which is supported by the observed reactivities of several putative reaction intermediates. The robust and scalable method was applicable to a broad range of primary aniline substrates including ortho-, meta-, and para-substituted anilines, as well as electron-rich and electron-deficient anilines. The synthetic precursor of diazepam, 5-chloro-2-(methylamino)benzophenone, was selectively synthesized under our optimized conditions.     

Structure-reactivity correlation of anilines in acetic acid

The oxidation of aniline in glacial acetic acid with percarbonate, a dry carrier of hydrogen peroxide, is a second-order reaction conforming to the isokinetic relationship. The hitherto followed method of correlation of the reaction rates in terms of the structure-reactivity relationships is unsatisfactory and erroneous. But the reaction rates of molecular anilines, obtained for the first time, conform to the structure-reactivity relationships.     

Rate-limiting proton-transfer in the sigma-adduct forming reactions of 1,3,5-trinitrobenzene and 4-nitrobenzofuroxan with substituted anilines in dimethyl sulfoxide

Kinetic and equilibrium results are compared for the reactions in dimethyl sulfoxide of 1,3,5-trinitrobenzene, 1, and 4-nitrobenzofuroxan, 4, with a series of substituted anilines in the presence of Dabco or in, some cases, quinuclidine. pKa values for the corresponding anilinium ions are reported. The reactions of 1and 4 are likely to proceed through nucleophilic attack by the aniline to yield zwitterionic intermediates which may transfer an acidic proton to the bases present to yield the anionic adducts 9 or 12 respectively. In the formation of 9 from 1 the proton transfer step is rate-limiting; however, the slower interconversion of 4 and its zwitterion leads to only partial rate-limiting proton transfer in the formation of 12. Results with substituted anilines including 2-substituted and N-methyl aniline indicate that steric effects are not a major factor in determining rates of proton-transfer in these systems. Contrary to previous reports no evidence was found for a strong interaction between 1 and Dabco in DMSO.     

Asymmetric carbon-carbon coupling of phenols or anilines with aryllead triacetates

The asymmetric coupling of various phenol or aniline derivatives with bulky aryllead triacetates was thoroughly investigated using optically active amines, including strychnine and brucine. We found that conformationally restricted tertiary amines, as well as lithium aryloxides and molecular sieves, are essential for accelerating the rate of phenol coupling. Consequently, the reaction can be carried out at a low temperature (-40 to -20 degrees C) and gives a high degree of diastereo- and enantioselectivity. In contrast to the effectiveness of lithiation in phenol coupling, magnesation of anilines was a critical technique for aniline coupling with aryllead triacetates. Using these coupling methods, a diverse set of di-, tri, and polyaryl compounds with axial chirality can be easily obtained, and these should be useful for the construction of a variety of aryl-aryl frameworks involved in metal ligands, natural products, and artificial helical polymers.     

Electron transfer reaction of oxo(salen)chromium(V) ion with anilines

The kinetics of oxidation of 16 meta-, ortho-, and para-substituted anilines with nine oxo(salen)chromium(V) ions have been studied by spectrophotometric, ESIMS, and EPR techniques. During the course of the reaction, two new peaks with lambda(max) at 470 and 730 nm appear in the absorption spectrum, and these peaks are due to the formation of emeraldine forms of oligomers of aniline supported by the ESIMS peaks with m/z values 274 and 365 (for the trimer and tetramer of aniline). The rate of the reaction is highly sensitive to the change of substituents in the aryl moiety of aniline and in the salen ligand of chromium(V) complexes. Application of the Hammett equation to analyze kinetic data yields a rho value of -3.8 for the substituent variation in aniline and +2.2 for the substituent variation in the salen ligand of the metal complex. On the basis of the spectral, kinetic, and product analysis studies, a mechanism involving an electron transfer from the nitrogen of aniline to the metal complex in the rate controlling step has been proposed. The Marcus equation has been successfully applied to this system, and the calculated values are compliant with the measured values.     

A new pathway for hydroamination. Mechanism of palladium-catalyzed addition of anilines to vinylarenes

The mechanism of the hydroamination of vinylarenes with anilines catalyzed by phosphine-ligated palladium triflates was uncovered. eta3-Arylethyl diphosphine palladium triflate complexes, which result from migratory insertion of vinylarene into a palladium hydride triflate, were shown to be the resting state of the catalytic cycle. A series of these complexes has been isolated and fully characterized. The [(R)-Tol-BINAP][1-(2-naphthyl)ethyl]palladium triflate derivative 1a was crystallographically characterized. This complex reacted with aniline to form the N-phenethylaniline product in 83% yield. Reaction of the benzylic derivative [(R)-Tol-BINAP](eta3-benzyl)palladium triflate with aniline also formed the N-benzylaniline product in a high 87% yield. Predominant inversion of configuration from the reaction between 1a, which is enantiopure, and aniline showed that external attack of the amine on the eta3-arylethyl ligand occurred to form the product. This product from reaction of aniline with 1a is the opposite enantiomer to that obtained from the catalytic process. Thus, a minor diastereomer gives the major enantiomer in the catalytic cycle, and the major diastereomer gives the minor enantiomer. Consistent with this assertion, kinetic studies showed that the major diastereomer formed product with a rate constant roughly 3.5 times slower than the rate constant for the catalytic process that contains all diastereomers.     

Effect of molecular motion and solvent interactions on nitrogen-15 relaxation in anilines

Dipolar relaxation of ¹⁵N in anilines and anilinium ions is influenced by overall motion of the molecule, by rotation about the aryl–-nitrogen bond, by inversion of the aniline nitrogen and by interactions of the NH₂ or NH₃⁺ group with the solvent. These factors are assessed by comparison of the ¹³C and ¹⁵N dipolar relaxation times as a function of para-substitution on the aryl ring. In the anilines (solvent CDCl₃), electron withdrawal brings about faster relative motion of the amine side-chain, contrary to expectation from consideration of C? N rotation but in agreement with the effects from nitrogen inversion. The ¹⁵N dipolar relaxation time correlates with the Hammett σ_p. For the anilinium ions (solvent Me₂SO-d₆), there is no correlation with σ_p and no qualitative relationship with either C? N rotation or N inversion. Nitrogen-15 relaxation, corrected for overall motion as judged by ring ¹³C relaxation, correlates with the inductive parameter σ_I. Electron withdrawal through induction reduces hydrogen bonding and increases side-chain mobility. For most of the anilines and for all of the anilinium ions, solvent interactions cause the nitrogen side-chain to be less mobile than the aryl ring. Under these circumstances, the Woessner approach cannot be used to calculate barriers. The hydrogen bond donor properties of the anilines are reduced in the absence of electron-donating substituents, and the first barriers to NH₂ rotation/inversion were calculated by this procedure: aniline in CDCl₃ 3.5 kcal/mol, p-chloroaniline in CDCl₃ 3.4 kcal/mol and p-nitroaniline in acetone 3.8 kcal/mol.     

Gold(I)-catalyzed polycyclizations of polyenyne-type anilines based on hydroamination and consecutive hydroarylation cascade

A hydroamination-double hydroarylation cascade using aniline derivatives bearing a trienyne moiety as the substrate was efficiently promoted by a gold(I) catalyst to produce benzo[a]naphtho[2,1-c]carbazole derivatives in good yields. This reaction is applicable to various substituted trienyne-type anilines, including 2,3-diethynylthiophene derivatives. The reaction of anilines bearing a tetraenyne and pentaenyne moiety allows direct construction of highly fused carbazoles by tetra- and pentacyclization, respectively, through hydroamination and consecutive hydroarylation without producing any theoretical waste products from the substrates.     

ESR study of the free radical intermediates formed during the electrolytic process: III. Electrooxidation of substituted anilines

Active free radicals formed by the electrooxidation of substituted anilines RC₆H₄NH₂ (R = H, p-Br, p-Cl, p-I, p-Me, p-COOH, p-MeCO, p-NO₂, m-CO₂H, and m-Cl) are trapped by spin trap 2-methyl-2-nitroso propane (MNP). A multiple ESR signal of the solution containing electrolytic aniline and MNP is identified with the spin adduct of MNP and radical cation 1 by theoretical simulation of observed spectrum. Furthermore, ESR spectra of para- or meta-substituted anilines give a reasonable explanation about spin adducts of MNP and the cation 2 or 3 by the same method.