Applications of solid-phase microextraction in food analysis

Food analysis is important for the evaluation of the nutritional value and quality of fresh and processed products, and for monitoring food additives and other toxic contaminants. Sample preparation, such as extraction, concentration and isolation of analytes, greatly influences the reliable and accurate analysis of food. Solid-phase microextraction (SPME) is a new sample preparation technique using a fused-silica fiber that is coated on the outside with an appropriate stationary phase. Analyte in the sample is directly extracted to the fiber coating. The SPME technique can be used routinely in combination with gas chromatography (GC), GC–mass spectrometry (GC–MS), high-performance liquid chromatography (HPLC) or LC–MS. Furthermore, another SPME technique known as in-tube SPME has also been developed for combination with LC or LC–MS using an open tubular fused-silica capillary column as an SPME device instead of SPME fiber. These methods using SPME techniques save preparation time, solvent purchase and disposal costs, and can improve the detection limits. This review summarizes the SPME techniques for coupling with various analytical instruments and the applications of these techniques to food analysis.     

On-line coupled liquid chromatography-gas chromatography

On-line coupled liquid chromatography–gas chromatography (LC–GC) is a powerful technique that combines the best features of LC and GC and is ideal for the analysis of complex samples. This review describes the unique features of on-line coupled LC–GC. The different interfaces and evaporation techniques are presented, along with their advantages and disadvantages. Guidelines are given for selecting a suitable LC–GC technique and representative applications are noted.     

Comparison between liquid chromatography-UV detection and liquid chromatography-mass spectrometry for the characterization of impurities and/or degradants present in trimethoprim tablets

The characterization of impurities and/or degradants present in pharmaceutical compounds is an important part of the drug development process. Although LC–UV is commonly employed for impurities and degradant compound determination, LC–MS techniques are proposed in this work to be a viable modern alternative for the characterization of these compounds. LC–UV and LC–MS were compared for the detection of impurities present in different brands of trimethoprim tablets by using an in-line LC–UV–MS system with atmospheric pressure chemical ionization source (APCI) coupled with a reversed-phase gradient HPLC system. It was shown that, although chemical noise was higher when using full-scan LC–MS compared to LC–UV, low level impurities were better detected by mass spectrometry (MS) when modern software algorithms are employed. These included the “Contour” chromatogram algorithm and/or the “component detection algorithm” (CODA). In addition, MS allowed for the simultaneous determination of the molecular masses and some structural information of the impurities and/or degradants. The results also showed a large difference in the purity of trimethoprim among different manufacturers. LC–MS and tandem MS techniques were employed to acquire fragmentation patterns for trimethoprim and its degradants to gain insight into their structures.     

Liquid chromatography-inductively coupled plasma mass spectrometry

It is known that while many elements are considered essential to human health, many others can be toxic. However, because the intake, accumulation, transport, storage and interaction of these different metals and metalloids in nature is strongly influenced by their specific elemental form, complete characterization of the element is essential when assessing its benefits and/or risk. Consequently, interest has grown rapidly in determining oxidation state, chemical ligand association, and complex forms of a many different elements. Elemental speciation, or the analyses that lead to determining the distribution of an element’s particular chemical species in a sample, typically involves the coupling of a separation technique and an element specific detector. A large number of methods have been developed which utilize a multitude of different separation mechanisms and detection instruments. Yet, because of its versatility, robustness, sensitivity and multi-elemental capabilities, the coupling of liquid chromatography to inductively coupled plasma mass spectrometry (LC–ICP–MS) has become one of the most popular techniques for elemental speciation studies. This review focuses on the basic principles of LC–ICP–MS, its historical development and the many ways in which this technique can be applied. Different liquid chromatography separations are discussed as well as the factors that must be considered when coupling each to ICP–MS. Recent applications of LC–ICP–MS to the speciation of environmental, biological and clinical samples are also presented.     

Rapid method for determination of chlormequat residues in tomato products by ion-exchange liquid chromatography/electrospray tandem mass spectrometry

A rapid method has been devised for the direct determination of chlormequat in tomato samples. No clean-up is required, and analysis uses ion-exchange liquid chromatography/tandem mass spectrometry interfaced with electrospray ionization (LC/ESI-MS/MS). A cation-exchange column was used with an aqueous ammonium acetate/acetonitrile mixture as the mobile phase under isocratic conditions. The method was validated in terms of detection limits (LOD), quantitation limits (LOQ), linearity, recovery, precision and accuracy. Good results in the low micro g kg(-1) level were obtained for the LOD and LOQ of chlormequat in tomato samples. Comparison of solvent and matrix-matched calibration curves demonstrated the absence of significant matrix effects and the feasibility of using external calibration. Linearity was established over two orders of magnitude by performing homoscedasticity and Mandel fitting statistical tests. The absence of both constant and proportional systematic errors was verified by evaluating the recovery function, demonstrating good method accuracy. Excellent precision in terms of intra-day repeatability was calculated (RSD% <3.4). Extraction recoveries from tomato products were calculated, by using a labelled internal standard (d(4)-chlormequat), to be in the 93 +/- 5-99 +/- 7% range. The applicability of the method to the determination of chlormequat residues in tomato products was demonstrated.     

Quantitative analysis of cytokinins in plants by liquid chromatography–single-quadrupole mass spectrometry

A sensitive method for the quantitative analysis of all natural isoprenoid cytokinins in plant material by electrospray single-quadrupole mass spectrometry is presented. A baseline chromatographic separation of 20 non-derivatised naturally occurring cytokinins has been developed. Precise analyses of O-glucoside and ribonucleotide fractions were also performed by the high-performance liquid chromatography–mass spectrometry (HPLC–MS) but run separately from the basic cytokinin metabolites. Using post-column splitting, the flux from narrow-bore (2.1 mm i.d.) reversed-phase liquid chromatography column was simultaneously introduced into the diode array and mass detector. Optimal conditions, including final flow rate, desolvation temperature, desolvation gas flow, capillary and cone voltage for effective ionisation in the electrospray ion source were found. When low cone voltage (20 V) was applied, all studied cytokinins were determined in aqueous methanol as dominant quasi-molecular ions of [M+H]⁺ with limits of detection ranging between 10 and 50 fmol. For routine analysis a linearity range between 25 (75) fmol and 100 pmol was obtained. Developed liquid chromatography–mass spectrometry (LC–MS) method in selective ion monitoring mode was employed to quantify cytokinin species in tobacco BY-2 suspension culture and poplar leaves (Populus×canadensis Moench, cv Robusta).

Purified plant cell (BY-2) and plant tissue (poplar leaves) extracts were obtained by using two different ion-exchange chromatography steps, in combination with immunoaffinity purification using a broad-spectrum monoclonal anti-cytokinin antibody. The antibody strongly recognises the presence of N⁶-substituent on purine skeleton and thus does not bind adenine and related compounds. The presence of authentic cytokinins in the extracts quantified by LC–MS was further verified by enzyme-linked immunosorbent assays (ELISAs) with prior LC preparation. The combination of liquid chromatography–single-quadrupole mass spectrometry with immunoaffinity chromatography offers an efficient and elegant method for detection and quantification of cytokinin metabolites.     

Liquid chromatography-(tandem) mass spectrometry of selected emerging pollutants (steroid sex hormones,drugs and alkylphenolic surfactants) in the aquatic environment

Among the various compounds considered as emerging pollutants, alkylphenolic surfactants, steroid sex hormones, and pharmaceuticals are of particular concern, both because of the volume of these substances used and because of their activity as endocrine disruptors or as causative agents of bacterial resistance, as is the case of antibiotics. Today, the technique of choice for analysis of these groups of substances is liquid-chromatography coupled to mass spectrometry (LC–MS) and tandem mass spectrometry (LC–MS–MS). In the last decades, this technique has experienced an impressive progress that has made possible the analysis of many environmental pollutants in a faster, more convenient, and more sensitive way, and, in some cases, the analysis of compounds that could not be determined before. This article reviews the LC–MS and LC–MS–MS methods published so far for the determination of alkylphenolic surfactants, steroid sex hormones and drugs in the aquatic environment. Practical considerations with regards to the analysis of these groups of substances by using different mass spectrometers (single quadrupole, ion trap and triple quadrupole instruments, etc.), interfaces and ionization and monitoring modes, are presented. Sample preparation aspects, with special focus on the application of advanced techniques, such as immunosorbents, restricted access materials and molecular imprinted materials, for extraction/purification of aquatic environmental samples and extracts are also discussed.     

Determination of theophylline and its metabolites in biological samples by liquid chromatography-mass spectrometry

Liquid chromatography–mass spectrometry (LC–MS) is a powerful tool for analysis of drugs and their metabolites. We used a column-switching system in combination with atmospheric pressure chemical ionization LC–MS (LC–APCI–MS) for the determination of theophylline and its metabolites in biological samples. The separation was carried out on a reversed-phase column using methanol–20 mM ammonium acetate as a mobile phase at a flow-rate of 1 ml/min in 30 min. In the mass spectrum, the molecular ions of these drugs and metabolites were clearly observed as base peaks. This method is sufficiently sensitive and accurate for the pharmacokinetic studies of these drugs.     

Surface and wastewater quality monitoring: combination of liquid chromatography with (geno)toxicity detection,diode array detection and tandem mass spectrometry for identification of pollutants

Identification of unknown water pollutants with liquid chromatography and tandem mass spectrometry (LC–MS–MS) is often more complex and time consuming than identification with gas chromatography and mass spectrometry (GC–MS). In order to focus the identification effort on relevant compounds, unknown peaks need to be selected carefully. Based on its frequency of occurrence in the LC–Diode Array Detection (LC–DAD) chromatograms of surface and infiltrated waters, an unknown peak was selected for identification with LC–MS–MS. This compound was identified as hexamethoxymethylmelamine (HMMM), a chemical often used in the coating industry. This is the first time the presence of this chemical in surface waters has been reported. In addition to HMMM, two other structurally related compounds were found to be present in the investigated surface water. A standard mixture of HMMM and its by-products did not exhibit (geno)toxicity under the test conditions applied in this study. In another example, a genotoxic fraction of an industrial wastewater was isolated and examined by LC–MS–MS using a modern quadrupole–orthogonal acceleration-time-of-flight mass spectrometer (Q-TOF). Four compounds were detected. The structures of two compounds present are proposed to be 9-amino-2-hydroxy-acridine and 9-hydroxy-acridine-N-oxide or its structural isomer dihydroxy-acridine. Confirmation with standards could not be carried out, as pure compounds are not available. The other two compounds (structural isomers) could not be identified based on the data available within this study.     

Analysis of glycolytic intermediates in Saccharomyces cerevisiae using anion exchange chromatography and electrospray ionization with tandem mass spectrometric detection

The purpose of this study is to selectively and quantitatively analyze several glycolytic intermediates in cells of Saccharomyces cerevisiae using high-performance anion exchange chromatography (HPAEC) coupled to electrospray ionization tandem mass spectrometry for the analysis. A sodium hydroxide gradient is used to separate the glycolytic compounds and after the column sodium hydroxide is reduced by proton exchange with a membrane device prior to introduction to the mass spectrometer. The detection limits for 10 μl samples are down to the 0.4–5 pmol range. This corresponds for the intracellular metabolites to a range of 2–20 nmol per gram biomass dry weight (DW). Standard addition did reveal some influence of the sample matrix on the measured concentrations. Separation and analysis is hardly affected by the high sulfate and phosphate concentrations (1 mM) in the fermentation medium and by the intracellular matrix. Validation of the glucose-6-phosphosphate LC–MS–MS analysis results with enzymatic analysis showed an excellent agreement between the two methods. The suitability of the method was clearly shown by analyzing a series of steady state S. cerevisiae samples from a carbon limited aerobic chemostat culture.     

Clean-up and analysis of carbazole and acridine type polycyclic aromatic nitrogen heterocyclics in complex sample matrices

A HPLC method for the analysis of polycyclic aromatic nitrogen heterocyclics (PANHs) in complex sample matrices is presented. It isolated and separated carbazole and acridine type PANHs with an absolute recovery of between 79–98%. Open column chromatography is used as an initial step to isolate a PANH fraction. By applying normal-phase liquid chromatography using a dimethylaminopropyl silica stationary phase and utilising back-flush technique it was possible to separate the PANH fraction into two fractions containing acridine type and carbazole type PANHs, respectively. The method applied on a sample of solvent refined coal heavy distillate (SRC II HD). A number of 3–5 ring acridines and carbazoles were identified with GC–electron impact MS and quantified with GC–nitrogen–phosphorous detection. Polycyclic aromatic hydrocarbons (PAHs) were determined in the SRC II HD sample by automated on-line clean-up and analysis of the obtained PAH fraction with coupled LC–GC–flame ionization detection. There was no overlap between the PANH and the PAH fractions with this method, and carbazoles and acridines were efficiently separated.     

New extraction procedure to improve the determination of quinolones in poultry muscle by liquid chromatography with ultraviolet and mass spectrometric detection

The present article aims to develop a new extraction procedure to improve the determination of quinolones in chicken muscle. This new determination method was validated using liquid chromatography–ultraviolet detection (LC–UV) and liquid chromatography–mass spectrometry detection (LC–MS), which has special bearing on stability studies. The results obtained by using the method were compared with the results obtained with a previous methodology. The new extraction procedure presents a sensitivity low enough to determine concentration of these drugs below the permissible maximum residue limits (MRL) in chicken muscle and is less time consuming than the previous methodology.     

Evaluation of synthetic liquid chromatography—diode array detection—mass spectrometry data for the determination of enzyme kinetics

In this paper, we investigate the accuracy and precision of the results from diode array detector (DAD) data and mass spectrometry (MS) data as obtained subsequent to chromatographic separations using computer simulations. Special attention was given to simulations of multiple injections from a developing enzymatic reaction. These simulations result in three-way LC–DAD–MS kinetic data; LC–DAD and LC–MS data were also evaluated independently in this investigation. The noise characteristics of the MS detector prevent accurate determination of the individual reaction rate constants by the analysis method. Using the data from the DAD in combination with the MS detector results in improved estimation of the rate constants. The results also indicate that the higher resolving power of the MS information compensates for the lower signal-to-noise ratio in these data, compared to DAD data.     

Analytical determination of nicotine in tobacco leaves by gas chromatography–mass spectrometry

A preliminary investigation using gas chromatography–mass spectrometry (GC–MS) to analyze the nicotine contained in tobacco leaves was carried out. Nicotine is an alkaloid and tobacco leaves was extracted with methanol and determined by GC–MS. The detection limit for nicotine was at the ppm level for non selective monitoring and the nanogram level for selective detection. This is a simple chromatography–mass spectrometry method for the analysis of nicotine in tobacco leave. Compared to other currently utilized methods for the detection of nicotine in tobacco leaves, the GC–MS provided advantages of high sensitivity, nicotine specific detection and lower instrumentation cost.     

Analysis of acidic drugs in the effluents of sewage treatment plants using liquid chromatography-electrospray ionization tandem mass spectrometry

Azaspiracid poisoning (AZP) is a new human toxic syndrome that is caused by the consumption of shellfish that have been feeding on harmful marine microalgae. A liquid chromatography–mass spectrometry (LC–MS) method has been developed for the determination of the three most prevalent toxins, azaspiracid (AZA1), 8-methylazaspiracid (AZA2) and 22-demethylazaspiracid (AZA3) as well as the isomeric hydroxylated analogues, AZA4 and AZA5. Separation of five azaspiracids was achieved on a C₁₈ column (Luna-2, 150×2 mm, 5 μm) with isocratic elution using acetonitrile–water containing trifluoroacetic acid and ammonium acetate as eluent modifiers. Using an electrospray ionisation (ESI) source with an ion-trap mass spectrometer, the spectra showed the protonated molecules, [M+H]⁺, with most major product ions due to the sequential loss of two water molecules. A characteristic fragmentation pathway that was observed in each azaspiracid was due to the cleavage of the A-ring at C₉–C₁₀ for each toxin. It was possible to select unique ion combinations to distinguish between the isomeric azaspiracids, AZA4 and AZA5. Highly sensitive LC–MS³ analytical methods were compared and the detection limits were 5–40 pg on-column. Linear calibrations were obtained for AZA1 in shellfish in the range 0.05–1.00 μg/ml (r²=0.9974) and good reproducibility was observed with a relative standard deviation (%RSD) of 1.8 for 0.9 μg AZA1/ml (n=5). The %RSD values for the minor toxins, AZA4 and AZA5, using LC–MS³ (A-ring fragmentation) were 12.3 and 8.1 (0.02 μg/ml; n=7), respectively. The selectivity of toxin determination was enhanced using LC–MS–MS with high energy WideBand activation.     

Gas chromatography/tandem mass spectrometry analysis of alkylresorcinols in red blood cells

Erythrocyte alkylresorcinols (5‐alkyl‐1,3‐dihydroxybenzenes) are potential biomarkers of wholegrain wheat and rye intake. However, their high‐throughput quantitative analysis by gas chromatography/mass spectrometry (GC/MS) is hindered by the time‐consuming sample preparation and, more importantly, by interfering compounds that still remain after sample cleanup. In the present work we describe a gas chromatography/tandem mass spectrometry (GC/MS/MS) method for the rapid and reliable quantification of alkylresorcinols in erythrocyte samples. The performance of the GC/MS/MS method is compared with that of GC/MS. The main characteristics of the method are: lower limits of detection: 2–10 µg/L standard solution; lower limits of quantification: 6–30 µg/L standard solution; linearity coefficients: 0.9611–0.9888; linear ranges: 2–20 µg/L in erythrocytes; and intra‐day precisions (n = 6): 4–13% at endogenous analyte levels in non‐spiked erythrocytes. Tandem mass spectrometry showed greatly improved selectivity over single‐stage mass spectrometry in the case of erythrocyte samples, eliminating all interferences detectable in single‐stage MS and enabling simple peak integration for quantification. Moreover, increased selectivity resulted in GC separation speeded up by a factor of two, allowing the duplicate analysis of over 40 samples per day. This GC/MS/MS method is suggested as an improved alternative to GC/MS for the quantification of alkylresorcinols in erythrocytes for assessing wholegrain wheat and rye intake. Copyright © 2008 John Wiley & Sons, Ltd.     

Analysis of pesticides in fruit, vegetables and cereals using methanolic extraction and detection by liquid chromatography–tandem mass spectrometry

A method for analysing carbamates and other relatively polar pesticides by LC–MS–MS with electrospray ionisation has been developed. The method is based on extraction by ultrasonication using a methanolic ammonium acetate–acetic acid buffer. After centrifugation the samples are filtered in Miniprep filter HPLC vials and detected by LC–MS–MS. To compensate for variations in the MS response [¹³C₆]-carbaryl was used as internal standard and matrix-matched pesticide solutions were used as external standards for the quantification. The method has been validated for the matrices apple, avocado, carrot, lettuce, orange, potato and wheat at the spiking levels—0.02; 0.04 and 0.20 mg kg⁻¹. Recoveries were generally in the range 70–120%. Results from participation in three intercomparisons proved the accuracy of the method. As the analytical procedure does not include any concentration or cleanup steps, it is easy and fast to perform, making it applicable for routine analysis in large pesticide monitoring programmes.     

Comparison of differential mobility spectrometry and mass spectrometry for gas chromatographic detection of ignitable liquids from fire debris using projected difference resolution

The significance of forensic arson analysis accelerates the applications of new technologies in this area. Based on the previously reported application of differential mobility spectrometry (DMS) as a detection method for gas chromatography (GC) in arson analysis, the performances of DMS and mass spectrometry (MS) were compared using a novel chemometric tool, projected difference resolutions (PDRs). The PDR results show that one-way mass spectra data exhibit higher resolution than DMS data, while total ion chromatograms from GC–DMS show higher resolution than that from GC/MS for differentiating seven kinds of ignitable liquids. Combining the information from both chromatography and spectra, two-way data always have higher resolution than one-way data for these two detection methods, and GC/MS would exhibit better performance than GC–DMS according to the minimum resolution value. To verify the PDR results, a fuzzy rule-building expert system was applied for classifying these seven kinds of ignitable liquids from fire debris based on GC–DMS and GC/MS data, respectively. The prediction accuracies were consistent with PDR results, which proved that PDR is a powerful tool in comparing the performances of different analysis methods for pattern recognition. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Determination of butylated hydroxytoluene in food samples by high-performance liquid chromatography with ultraviolet detection and gas chromatography/mass spectrometry

A reversed-phase high-performance liquid chromatography (RP-HPLC) method was developed and compared with a gas chromatography/mass spectrometry (GC/MS) method for determining butylated hydroxytoluene (BHT) in foodstuffs as a result of migration from plastic packaging. Similar extraction procedures were used in both methods. BHT was quantitated using an external standard in the HPLC method and an internal standard in the GC/MS method. Both methods presented good linearity (r(2) > or = 0.9917) and low detection limits. Recoveries obtained with the HPLC method (chicken meat, 95.8%, and Gouda cheese, 83.9%) were better than with the GC/MS method (chicken meat, 85.6%, and Gouda cheese, 71.3%).     

Indirect hydrogen analysis by gas chromatography coupled to mass spectrometry (GC–MS)

Gas chromatography (GC) is an analytical tool very useful to investigate the composition of gaseous mixtures. The different gases are separated by specific columns but, if hydrogen (H₂) is present in the sample, its detection can be performed by a thermal conductivity detector or a helium ionization detector. Indeed, coupled to GC, no other detector can perform this detection except the expensive atomic emission detector. Based on the detection and analysis of H₂ isotopes by low‐pressure chemical ionization mass spectrometry (MS), a new method for H₂ detection by GC coupled to MS with an electron ionization ion source and a quadrupole analyser is presented. The presence of H₂ in a gaseous mixture could easily be put in evidence by the monitoring of the molecular ion of the protonated carrier gas. Copyright © 2013 John Wiley & Sons, Ltd.