热-压电效应对轴压混合层合圆柱曲板后屈曲的影响

基于Karman-Donnell型非线性壳体方程，给出带压电作动器混合层合圆柱曲板在机械荷载、电荷载和热荷载作用下的后屈曲分析．假定温度场为均匀分布，电场仅有沿板厚方向的分量Ez，且假定材料性能常数与温度和电场的变化无关。将壳体屈曲的边界层理论推广到混合层合圆柱曲板受复合荷载作用的情况.相应的奇异摄动法用于确定圆柱曲板的屈曲荷载和后屈曲平衡路径.分析中同时考虑非线性前屈曲变形和初始几何缺陷的影响．数值算例给出完善和非完善，含整体覆盖或内埋压电作动器正交铺设层合圆柱曲板的后屈曲平衡路径。讨论了温度变化、控制电压、铺层方式、面内边界条件和初始几何缺陷等各种参数变化的影响。     

湿热环境中复合材料层合圆柱薄壳屈曲和后屈曲

在宏-细观力学模型框架下,讨论湿热环境对复合材料层合圆柱薄壳在轴向压缩作用下屈曲和后屈曲行为的影响。基于细观力学模型复合材料性能与湿度和温度变化有关。壳体控制方程基于经典层合壳理论,并包括湿热效应。壳体屈曲的边界层理论被推广用于湿热环境的情况,相应的奇异摄动法用于确定层合圆柱薄壳的屈曲荷载和后屈曲平衡路径。分析中同时计及壳体非线性前屈曲变形和初始几何缺陷的影响。数值算例给出完善和非完善正交铺设层合圆柱薄壳在不同湿热环境中的后屈曲行为。讨论了温度和湿度,纤维体积比率,壳体几何参数,铺层数,铺层方式和初始几何缺陷等各种参数变化的影响。     

湿热环境中复合材料层合圆柱薄壳的屈曲和后屈曲

在宏-细观力学模型框架下,讨论湿热环境对复合材料层合圆柱薄壳在轴向压缩作用下屈曲和后屈曲行为的影响.基于细观力学模型复合材料性能与湿度和温度变化有关.壳体控制方程基于经典层合壳理论,并包括湿热效应.壳体屈曲的边界层理论被推广用于湿热环境的情况,相应的奇异摄动法用于确定层合圆柱薄壳的屈曲荷载和后屈曲平衡路径.分析中同时计及壳体非线性前屈曲变形和初始几何缺陷的影响.数值算例给出完善和非完善正交铺设层合圆柱薄壳在不同湿热环境中的后屈曲行为.讨论了温度和湿度,纤维体积比率,壳体几何参数,铺层数,铺层方式和初始几何缺陷等各种参数变化的影响.     

非完善加筋圆柱壳在外压和热荷载共同作用下的后屈曲

基于壳体屈曲的边界层理论,本文给出有限长加筋圆柱壳在侧向外压和均布热荷载共同作用下的后屈曲分析。分析中同时考虑壳体非线性前屈曲变形,大挠度和初始几何缺陷的影响。肋条的处理采用“平均刚度”法。采用奇异摄动方法导得壳体屈曲载荷关系曲线和后屈曲平衡路径,并给出完善和非完善,纵向加筋或环向加筋圆柱壳数值算例。     

高阶剪切变形板理论K■rm■n型方程及在热后屈曲分析中的应用

本文基于Reddy高阶剪切变形板理论导出Karman型非线性大挠度方程并用于层合板热后屈曲分析．分析中计及板初始几何缺陷和热效应．给出了四边简支．对称正交铺设层合板在均匀或非均匀抛物型热分布作用下的后屈曲分析．采用摄动-Galerkin混合法确定板的热屈曲载荷与热后屈曲平衡路径．同时讨论了横向剪切变形，板长宽比，铺层数以及初始几何缺陷等各种参数变化的影响．     

高阶剪切变形板理论Karman型方程及在热后屈曲分析中的应用

本文基于Ｒｅｄｄｙ高阶剪切变形板理论导出Ｋａｒｍａｎ型非线性大挠度方程并用于层合板热后屈曲分析，分析中计及板初始几何缺陷和热效应。给出了四边简支，对称正交铺设层合板在均匀或非均匀抛物型热分布作用下的后屈曲分析。采用摄动－Ｇａｌｅｒｋｉｎ混合法确定板的热屈曲载荷与热后屈曲平衡路径。同时讨论了横向剪切变形。采用摄动－Ｇａｌｅｒｋｉｎ混合法确定板的热屈曲载荷与热后屈曲平衡路径。同时讨论了横向剪切变形，板     

加载和卸载过程中复合材料叠层圆柱曲板后屈曲路径的研究

本文用动态松弛法研究了在加载和卸载过程中复合材料叠层圆柱曲板的后屈曲路径,发现了加载路径与卸载路径不重合的现象,给出了在均匀单轴压力作用下的十字叠层圆柱曲板在两种边界条件下的数值结果,并讨论了层数、曲率半径、初始几何缺陷等因素对后屈曲路径的影响.     

中厚板热后屈曲分析

依据Reissner-Mindlin板理论考虑转动惯量和横向剪切变形影响,本文给出中厚板在(1)均布和非均布(线性)热荷载作用下;(2)单向压缩和均布热荷载共同作用下的后屈曲分析。采用摄动法导出完善和非完善中厚板的热屈曲载荷和热后屈曲平衡路径,并与经典薄板理论结果进行了比较。     

中厚板的弹性屈曲和后屈曲

本文采用Reissner假定考虑横向剪切变形的影响,导出弹性矩形板大挠度方程.本文讨论考虑横向剪切变形的矩形板的弹性屈曲和后屈曲.采用文[8]提供的摄动方法,给出了完善和非完善中厚板的后屈曲平衡路径,并与经典薄板理论结果进行了比较.     

复合材料叠层板的非线性动力稳定性

研究复合材料叠层板的非线性动力稳定性,分析中考虑大挠度和初始几何缺陷的存在,得到了不同边界条件和不同铺设方法叠层板在荷载作用下的突变失稳模型及其屈曲临界条件．     

Postbuckling of a shear-deformable anisotropic laminated cylindrical shell under external pressure in thermal environments

A postbuckling analysis is presented for a shear-deformable anisotropic laminated cylindrical shell of finite length subjected to external pressure in thermal environments. The material properties are expressed as linear functions of temperature. The governing equations are based on Reddy’s higher-order shear-deformation shell theory with the von Karman-Donnell-type kinematic nonlinearity. The nonlinear prebuckling deformations and initial geometric imperfections of the shell are both taken into account. The boundary-layer theory of shell buckling, which includes the effects of nonlinear prebuckling deformations, large deflections in the postbuckling region, and the initial geometric imperfections of the shell, is extended to the case of shear-deformable anisotropic laminated cylindrical shells under lateral or hydrostatic pressure in thermal environments. The singular perturbation technique is employed to determine the interactive buckling loads and postbuckling equilibrium paths. The results obtained show that the variation in temperature, layer setting, and the geometric parameters of such shells have a significant influence on their buckling load and postbuckling behavior. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 43, No. 6, pp. 789–822, November–December, 2007.     

Nonlinear buckling and postbuckling of a shear-deformable anisotropic laminated cylindrical panel under axial compression

The nonlinear buckling and postbuckling of a shear-deformable anisotropic laminated cylindrical panel of finite length is investigated based on a boundary-layer theory for buckling. The layers of the panel are assumed to be linearly elastic. The governing equations are based on Reddy’s higher-order shear deformation theory of shells and include the von Karman-type kinematic nonlinearity and extension/twist, extension/flexure, and flexure/twist couplings. The nonlinear prebuckling deformations and the initial geometric imperfections of the panel are both taken into account. The postbuckling behavior of the panel under axial compression is analyzed. A singular perturbation technique is employed to determine its buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling behavior of perfect and imperfect moderately thick anisotropic laminated cylindrical panels with different geometric parameters and stacking sequences. The new finding reveals that there arises a compressive stress along with an associate shear stress and twisting when a moderately thick anisotropic laminated cylindrical panel is subjected to axial compression.     

Postbuckling characteristics of angle-ply laminated truncated circular conical shells

The postbuckling characteristics of the angle-ply laminated composite conical shells subjected to the torsion, the external pressure, the axial compression, and the thermal loading considering uniform temperature change are studied using the semi-analytical finite element approach. The finite element formulation is based on the first-order shear deformation theory and the field consistency principle. The variations in the stiffness coefficients along the meridional direction due to the changes in the ply-angle and the ply-thickness of the filament wound conical shells are incorporated in the finite element formulation. The nonlinear governing equations are solved using the Newton–Raphson iteration procedure coupled with the displacement control method to trace the prebuckling followed by the postbuckling equilibrium path. The presence of asymmetric perturbation in the form of a small magnitude load spatially proportional to the linear buckling mode shape is considered to initiate the bifurcation of the shell deformation. The influence of semi-cone angle, ply-angle and number of circumferential waves on the prebuckling/postbuckling response of the anti-symmetric angle-ply laminated circular conical shells is investigated.     

Nonlinear response of shear deformable FGM curved panels resting on elastic foundations and subjected to mechanical and thermal loading conditions

This paper presents an analytical investigation on the nonlinear response of thick functionally graded doubly curved shallow panels resting on elastic foundations and subjected to some conditions of mechanical, thermal, and thermomechanical loads. Material properties are assumed to be temperature independent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of constituents. The formulations are based on higher order shear deformation shell theory taking into account geometrical nonlinearity, initial geometrical imperfection and Pasternak type elastic foundation. By applying Galerkin method, explicit relations of load-deflection curves for simply supported curved panels are determined. Effects of material and geometrical properties, in-plane boundary restraint, foundation stiffness and imperfection on the buckling and postbuckling loading capacity of the panels are analyzed and discussed. The novelty of this study results from accounting for higher order transverse shear deformation and panel-foundation interaction in analyzing nonlinear stability of thick functionally graded cylindrical and spherical panels.     

Compressive and thermal postbuckling behaviors of laminated plates with piezoelectric fiber reinforced composite actuators

This paper studied compressive postbuckling under thermal environments and thermal postbuckling due to a uniform temperature rise for a shear deformable laminated plate with piezoelectric fiber reinforced composite (PFRC) actuators based on a higher order shear deformation plate theory that includes thermo-piezoelectric effects. The material properties are assumed to be temperature-dependent and the initial geometric imperfection of the plate is considered. The compressive and thermal postbuckling behaviors of perfect, imperfect, symmetric cross-ply and antisymmetric angle-ply laminated plates with fully covered or embedded PFRC actuators are conducted under different sets of thermal and electric loading conditions. The results reveal that, the applied voltage usually has a small effect on the postbuckling load–deflection relationship of the plate with PFRC actuators in the compressive buckling case, whereas the effect of applied voltage is more pronounced for the plate with PFRC actuators, compared to the results of the same plate with monolithic piezoelectric actuators.