Spectrophotometric study of competitive complexation equilibria involving overlapped spectral responding species: Determination of the stability constant of bismuth-pyrophosphate complex

Spectrophotometric study of competitive complex formation equilibria involving overlapped spectral responding species applying a simple and versatile algorithm was carried out. The algorithm involves multivariable regression for calculation of equilibrium concentrations from multiwavelength data and mass action law for the stability constant calculation. The used regression functions are part of common statistical software. Stability constants and complex stoichiometry of competing equilibria were simultaneously determined. The species concentration profiles at several spectral overlapping and ??-coefficient of competing reaction were obtained. Non-absorbing bismuth ?? pyrophosphate (PPh) system was studied as a competitive reaction of bismuth ?? 4-(2-Pyridylazo) resorcinol (PAR) complex. The formation of Bi-PPh complex with 1:1 stoichiometry was proved in the studied concentration region (C_Bi = 1×10^?5 mol L^?1; C_PPh = 5×10^?6 ? 1×10^?4 mol L^?1). The stability constant of the complex at pH 1 and ?? = 1.0 have been determined: log?? = 4.2±0.2.      

Mechanochemical synthesis of thenoyltrifluoroacetone-1,10-phenanthroline europium complex

The paper considers the possibilities for mechanochemical synthesis of rare earth complexes. The complex Eu(TTA)₃·phen (HTTA — 2-thenoyltrifluoroacetone, phen — 1,10-phenanthroline) is synthesized by mechanical treatment of a mixture of EuCl₃.6H₂O, HTTA, phen and NaOH in planetary ball mill Pulverisette 7 for 30 min at 800 min^?1. The non reacted starting reagents and reaction side products are separated by treating activated mixture with water-ethanol solution following a procedure proposed in the literature. The elemental composition, X-ray diffraction pattern, IR spectra, optical properties (excitation and emission spectra, luminescence lifetime) and morphology of the mechanochemically synthesized complex are compared with those of the complex prepared from solution by the conventional method. The results confirm close similarity in the molecular structure and identity of the elemental composition, X-ray diffractograms and fluorescence properties of the compounds prepared by both methods.      

Voltammetric quantitation at the mercury electrode of the anticholinergic drug flavoxate hydrochloride in bulk and in a pharmaceutical formulation

Flavoxate hydrochloride, 2-piperidinoethyl 3-methyl-4-oxo-2-phenyl-4-H-chromene-8-carboxylate, is a smooth muscle antispasmodic. Its electrochemical behavior was studied at the mercury electrode in buffered solutions containing 30% (v/v) methanol using dc-polarography, differential-pulse polarography, cyclic voltammetry, and linear sweep-and square-wave adsorptive stripping voltammetry. Sensitive and precise procedures were developed for determination of bulk flavoxate hydrochloride and in the pharmaceutical formulation Genurin® S.F, without sample pretreatment or extraction. Limits of quantitation (LOQ) of 1 × 10^?5, 5 × 10^?6, 1 × 10^?8 and 1 × 10^?9 M flavoxate hydrochloride were achieved by dc-polarography, differential-pulse polarography, linear sweep and square-wave adsorptive stripping voltammetric, respectively.      

Flow-injection spectrophotometric determination of dipyrone in pharmaceutical formulations using a solid-phase reactor with copper(II) phosphate

In this work, a flow-injection spectrophotometric method for dipyrone determination in pharmaceutical formulations was developed. Dipyrone sample solutions were injected into a carrier stream of deionized water and the reaction was carried out in a solid-phase reactor (12 cm, 2.0 mm i.d.) packed with Cu₃(PO₄)_2(s) entrapped in a matrix of polyester resin. The Cu(II) ions were released from the solid phase reactor by the formation of Cu(II)-(dipyrone)_n complex. When the complex is released, it reacts with 0.02% m/v alizarin red S in deionized water to produce a Cu(VABO₃)₃ complex whose absorbance was monitored at 540 nm. The calibration graph was linear over the range 5.0×10^?5–4.0×10^?4 mol L^?1 with a detection limit of 2.0×10^?5 mol L^?1 and relative standard deviation for 10 successive determinations of 1.5% (2.0×10^?4 mol L^?1 dipyrone solution). The calculated sample throughput was 60 h^?1. The column was stable for at least 8 h of continuous use (500 injections) at 25°C. Pharmaceutical formulations were analyzed and the results from an official procedure measurement were compared with those from the proposed FIA method in order to validate the latter method.      

Electrochemical determination of tyrosine in the presence of uric acid at a carbon paste electrode modified with multi-walled carbon nanotubes enhanced by sodium dodecyl sulfate

Tyrosine (Tyr) was quantitated with high sensitivity and selectivity in the presence of uric acid (UA) using a carbon paste electrode modified with multi-walled carbon nanotubes. Tyr and UA were catalytically oxidized with diffusion-controlled characteristics. They were determined simultaneously by differential pulse voltammetry with a potential difference of 350 mV. The electrocatalytic currents increase linearly with Tyr and UA concentrations 4×10^?7?1×10^?4 M and 3×10^?7?2×10^?4 M. Their detection limits were 1×10^?7 and 5.1×10^?8 M respectively. In the presence of sodium dodecyl sulfate the Tyr detection limit improved from 1×10^?7 to 6.9×10^?8 M. The electrode was successfully used to quantitate Tyr and UA in serum.      

Voltammetric behavior and quantitative determination of ambazone concentrations in urine and in a pharmaceutical formulation

The use of square wave adsorptive stripping voltammetry (SWAdSV) in conjunction with a cyclic renewable silver amalgam film electrode (Hg(Ag)FE) for the analytical determination of ambazone in urine samples and pharmaceutical formulations is described. A single reduction peak in Britton-Robinson buffer at pH 4.0 was detected at about ?1.4 V versus Ag/AgCl. Mechanistic studies have shown that the compound can act as an electrocatalyst. The method was validated. The analytical curve was linear in the concentration range from 1.0×10^?9 to 1.0×10^?7 mol L^?1. The detection and quantification limits were found to be 3.0×10^?10 mol L^?1 and 1.0×10^?9 mol L^?1, respectively. The proposed method was successfully applied to ambazone determination in real samples.      

Mechanism of rhodamine 6G molecular aggregation in montmorillonite colloid

Stopped-flow mixing device and visible absorption spectroscopy were used for the analysis of dye rhodamine 6G (R6G) molecular aggregation in the colloids based on Na-saturated montmorillonite. Two stages of the reaction were identified: The first stage was very short and taking only several seconds, involving the adsorption of R6G cations and their initial aggregation on the surface of colloid particles. The initially formed J-aggregates exhibited similar spectral properties as monomeric form of R6G. In the second stage, initially formed aggregates converted to sandwich-type H-aggregates absorbing light at significantly lower wavelengths and adsorbed monomers. The aggregate rearrangement took several hours. Monomers, with the spectral properties identical to R6G solution, were also identified as a component in complex spectra using principal component analysis (PCA) and multivariate curve resolution (MCR). Partial bleaching of the dye was also proven. Reaction kinetics of the rearrangement of the aggregates followed the model considering a complex mechanism of the molecular aggregation. Data fits using stretched-exponential function led to the determination of rate constants, which had been in the range 10^?3?4×10^?3s^?1.      

Debromination of 2,4,6-tribromophenol coupled with biodegradation

The application effect of aluminium and their alloys and mixtures with nickel was studied for the complete hydrodebromination of 2,4,6-tribromophenol (TBP) to phenol in aqueous NaOH solution at room temperature. It was found that the Raney Al-Ni alloy can rapidly transform TBP to phenol. Removal efficiency of 25 mM TBP solution in aqueous NaOH (15 g L^?1) solution at the end of 1h reaction was 100% using 4 g L^?1 Al-Ni. The hydrodebromination is accompanied by the dissolution of aluminium and formation of soluble Al(OH)₄ ^?1 anions under these reaction conditions. After completion of the hydrodebromination reaction removal of the dissolved metals was achieved by precipitation of appropriate hydroxides by adjustment of the pH value and filtration, the filtrate was treated with Pseudomonas or Rhodococcus bacterial strains to degrade dissolved phenol. The combined application of both (chemical-biological) treatments produced degradations of 100% of aromatic compounds.      

One-pot multicomponent synthesis of substituted 5,7-dihydro-1,6-naphthyridines and 5,6,7,8-tetrahydroquinolines

An one-pot approach was developed for the synthesis of substituted 5,7-dihydro-1,6-naphthyridines and 5,6,7,8-tetrahydroquinolines with moderate to good yields. This pathway is a modified two-step synthesis of Kröhnke pyridine and involves a four-component tandem reaction of N-phenacylpyridinium bromide, aromatic aldehydes, substituted or nitrogen-containing cyclic ketones and a nitrogen source. This multi-component reaction is performed using microwave irradiation heating of the reaction substrates under an environment of NH₄OAc/HOAc.

Open image in new window

     

Kinetics and mechanism of solid state imidapril hydrochloride degradation and its degradation impurities identification

A detailed stability testing of solid state imidapril hydrochloride (IMD) was performed and its degradation products were identified. The analysis was conducted according to ICH guidelines Q1A(R2). Pure IMD samples were exposed to stress conditions of elevated temperature and relative humidity (T = 363 K, RH = 76.4%) in order to accelerate degradation. The regular loss of IMD content with time, and the formation of two degradation impurities were observed. The appropriate reaction rate constants k (for IMD degradation and for the formation of product I and II) were calculated using Prout-Tompkins equation. The obtained degradation products were separated and identified by means of LC-MS technique. Based on the obtained m/z values, the masses and the structures of the formed degradation impurities were established. Also IMD degradation scheme was constructed. It was demonstrated that under the applied analytical conditions, IMD degradation follows an autocatalytic reaction model with the rate constant k = (4.764 ± 0.34)×10 ^?6 s ^?1 and with the parallel formation of two degradation products: imidaprilat and the diketopiperazine derivative. The obtained experimental results are in agreement with IMD degradation pathways proposed theoretically.      

Pulse perturbation technique for determination of piroxicam in pharmaceuticals using an oscillatory reaction system

A simple and reliable novel kinetic method for the determination of piroxicam (PX) was proposed and validated. For quantitative determination of PX, the Bray-Liebhafsky (BL) oscillatory reaction was used in a stable non-equilibrium stationary state close to the bifurcation point. Under the optimized reaction conditions (T = 55.0°C, [H₂SO₄]₀ = 7.60×10^?2 mol L^?1, [KIO₃]₀ = 5.90×10^?2 mol L^?1, [H₂O₂]₀ = 1.50×10^?1 mol L^?1 and j ₀ = 2.95×10^?2 min^?1), the linear relationship between maximal potential shift ΔE _m , and PX concentration was obtained in the concentration range 11.2–480.5 μg mL^?1 with a detection limit of 9.9 μg mL^?1. The method had a rather good sample throughput of 25 samples h^?1 with a precision RSD = 4.7% as well as recoveries RCV ≤ 104.4%. Applicability of the proposed method to the direct determination of piroxicam in different pharmaceutical formulations (tablets, ampoules and gel) was demonstrated.      

Comparative studies of Pd, Ru, Ni, Cu/ZnAl2O4 catalysts for the water gas shift reaction

The activity of monometallic Pd, Ru, Ni and Cu catalysts supported on spinel ZnAl₂O₄ for water gas shift reaction (WGS) was investigated. The physicochemical properties of each catalyst was studied by XRD, TPR, BET and chemisorption methods. The highest activity was obtained for Cu/ZnAl₂O₄ among the catalysts tested. The activation process carried out in a reducing atmosphere 5%H₂-95%Ar in the case of Cu/ZnAl₂O₄ system lead to the catalytic activity improvement. In the case of copper catalysts, the water gas shift reaction proceeded by the redox surface mechanism between Cu⁰/Cu⁺. The PdZn alloy formation after reduction at 350°C was shown.      

Voltammetric behavior of rutin at a boron-doped diamond electrode. Its electroanalytical determination in a pharmaceutical formulation

This paper examined for the first time, the possibilities of the usage of a boron-doped diamond electrode for the redox behavior of rutin using cyclic and adsorptive stripping voltammetry. The cyclic voltammograms showed a pair of redox peaks at lower potentials followed by an irreversible oxidation peak at higher positive potential. Using square-wave adsorptive stripping voltammetry, the compound yielded a well-defined voltammetric response in Britton-Robinson buffer, pH 4.0 at +0.48 V (vs. Ag/AgCl) (after 60 s accumulations at a fixed potential of 0.2 V). The calibration curve was linear in the concentration range from 0.01 µg mL^?1 to 0.1 µg mL^?1 (1.64×10^?8 M ? 1.64×10^?7 M). A detection limit of 0.0017 µg mL^?1 (2.78×10^?9 M) was observed without any chemical modifications and electrochemical surface pretreatments. As an example, the practical applicability of boron-doped diamond electrode was tested with the measurement of rutin in dietary supplement products.      

Influence of amino acid sequence on the interaction of short peptides containing 3-[2-(9-anthryl)benzoxazol-5-yl]-alanine with β-cyclodextrin

The influence of peptide sequence and Leu chirality in linear and cyclic peptides containing 3-[2-(9-anthryl)benzoxazol-5-yl]alanine on interaction with β-cyclodextrin were studied using fluorescence and NMR spectroscopy. The analysis of enthalpy-entropy compensation effect (α=1.05±0.02 and TΔS₀ ⁰=15.1±0.5 kJ mol^?1) indicates that the entropic contribution connected with the solvent reorganization is the major factor governing the peptides-β-cyclodextrin complexation. Moreover, spatial orientation of guest-host molecule depends more than association constant on Leu residue configuration. However, the cyclization of the peptide chain substantially decrease the association constant with β-CD. An analysis of 2D NMR spectra reveals that inclusion complex is formed by penetration of cyclodextrin cavity from wider and narrow rims by anthryl group in the case of Box(Ant)-SPKL or anthryl and Leu residues for Box(Ant)-SPK(D)L analogue.      

Complexes of platinum and palladium with 4-nitrobenzoic hydrazide: synthesis and cytotoxic activity

New complexes of platinum and palladium were isolated with 4-nitrobenzoic hydrazide (4-NH) and characterized by spectroscopic techniques. Results show that the ligand is coordinated to metallic ions by the basic nitrogen of NH₂ group and have the general structure cis-[M(4-NH)₂X₂] where M= Pt or Pd and x = Cl or I. The compound III, [Pt(4-NH)₂I₂], was found to display cytotoxicity (IC₅₀ = 0.96 μmol L^?1) against the K562 tumoral cell line. This complex is significantly more cytotoxic than cisplatin.      

Determination of lead in solution by solid phase extraction, elution, and spectrophotometric detection using 4-(2-pyridylazo)-resorcinol

Lead (+2) was selectively adsorbed on a solid phase extraction (SPE) gel (molecular recognition technology, MRT), quantitatively extracted, and spectrophotometrically determined as the Pb(II)-PAR (4-(2-pyridylazo)-resorcinol) complex. The linear range was 0.01 to 0.75 mg L^?1 and the detection limit was 6.4 µg L^?1. The MRT-SPE allows selective Pb(II) extraction from complex ion-rich matrices, which is difficult with other techniques. Interference from common matrix ions such as Fe²⁺, Ni²⁺, Cu²⁺ or Co²⁺ is minimized.      

Separation of trace amounts palladium by SiO2/TiO2/Ce nanoparticles prior to flame atomic absorption spectrometry determination in anodic slime and wastewater samples

In the present work, a new SiO₂/TiO₂/Ce, nanoparticle was synthesed using sol-gel method and evaluated as an adsorbent for preconcentration trace amounts of Pd(II) ions. The characterization of the nanoparticles has been studied by transmission electron microscope and X-ray diffraction. The preconcentration method is based on palladium adsorption onto the surface of nanoparticle at pH 8.5. The main factors affecting Pd(II) adsorption, such as pH of sample solution, concentration and volume of eluent, sample volume, interfering of the coexisting ions and flow rate of sample and eluent were investigated and optimized. At optimum conditions, linearity was maintained between 4.0 to 1000.0 ng mL^?1. Detection limit based on 3S_b/m was 2.3 ng mL^?1. Seven replicate determinations of a solution containing of 12.5 µg palladium gave a relative standard deviation ±1.7%. According to the Langmuir linear model, the maximum adsorption capacity of palladium was found to be 34.5 mg g^?1. Finally, the feasibility of the proposed method for Pd(II) determination was assessed by analysis of certified reference materials, anodic slime and wastewater samples and satisfactory results were obtained.      

Two charge-transfer complex spectrophotometric methods for the determination of sulpiride in pharmaceutical formulations

Two simple, rapid, accurate and sensitive spectrophotometric methods are described for the determination of sulpiride. They are based on charge transfer complexation between the drug as n-electron donor and p-chloranilic acid as π acceptor or iodine as σ-acceptor. These give highly coloured complexes with absorption maxima at 518 and 363, 294 nm, respectively. Beer’s law linear ranges were 13.7–341.4 and 1.7–20.5 µg mL^?1 for the p-chloranilic acid and iodine methods. The methods were successfully applied to the determination of the drug in Dogmatil® Fort tablets and the results compared with the official method. The complex association constants and standard free energy changes were calculated using Benesi-Hildebrand plots.      

The synthesis, structure and physical properties of lanthanide(III) complexes with nicotinic acid

This article reports the synthesis of novel, rare-earth coordination complexes with nicotinic acid. Three compounds with the general formula Ln₂[(C₅H₄NCOO)₆(H₂O)₄] (Ln = Yb, 1; Ln = Gd, 2; Ln = Nd, 3) were prepared from relatively cheap and readily available reactants. Their compositions and structure were characterized by IR spectroscopy and single-crystal X-ray diffraction. The magnetic and thermogravimetric properties were also studied. The complexes consist of centrosymetric, dimeric molecules having all six nicotinato ligands coordinated with the central atom in the bidentate mode. The coordination environment of the Ln³⁺ for all three compounds is 8. Here we describe the crystal structure of Yb and Gd complexes with nicotinic acid.      

Stereoselective preparation of mono- and bis-derivatives of pentacyclo[6.3.0.02,6.03,10.05,9] undecane (D 3-trishomocubane)

The rearrangement of easily accessible Cookson’s diketone with chlorosulfonic acid in chloroform followed by the acidic hydrolysis gave 6-chloro-7-hydroxy-dichloropentacyclo[6.3.0.0^2,6.0^3,10.0^5,9]undecane-4-one, whose syn-stereochemistry was assigned through the X-ray crystal structure analysis. This key structure was used for the stereoselective synthesis of the D ₃-trishomocubane derivatives as well as for the preparation of potential drugs bearing hydroxy- and amino-functional groups. A new multigram preparative synthesis of D ₃-trishomocubane was developed.