Cobalt‐Nanocrystal‐Assembled Hollow Nanoparticles for Electrocatalytic Hydrogen Generation from Neutral‐pH Water

Highly active and stable electrocatalysts for hydrogen generation from neutral‐pH water are highly desired, but very difficult to achieve. Herein we report a facile synthetic approach to cobalt nanocrystal assembled hollow nanoparticles (Co‐HNP), which serve as an electrocatalyst for hydrogen generation from neutral‐pH water. An electrode composed of Co‐HNP on a carbon cloth (CC) produces cathodic current densities of 10 and 100 mA cm^?2 at overpotentials of ?85 mV and ?237 mV, respectively. The Co‐HNP/CC electrode retains its high activity after 20 h hydrogen generation at a high current density of 150 mA cm^?2, indicating the superior activity and stability of Co‐HNP as electrocatalyst.     

Enantioselective LC‐ESI‐MS/MS determination of dropropizine enantiomers in rat plasma and application to a pharmacokinetic study

We developed and validated a simple, sensitive, selective and reliable LC–ESI‐MS/MS method for direct quantitation of dropropizine enantiomers namely levodropropizine (LDP) and dextrodropropizine (DDP) in rat plasma without the need for derivatization as per regulatory guidelines. Dropropizine enantiomers and carbamazepine (internal standard) were extracted from 50 μL rat plasma using ethyl acetate. LDP and DDP resolved with good baseline separation (R_s = 4.45) on a Chiralpak IG‐3 column. The mobile phase consisted of methanol with 0.05% diethylamine pumped at a flow rate of 0.5 mL/min. Detection and quantitation were done in multiple reaction monitoring mode following the transitions m/z 237 → 160 and 237 → 194 for dropropizine enantiomers and the internal standard, respectively, in the positive ionization mode. The proposed method provided accurate and reproducible results over the linearity range of 3.23–2022 ng/mL for each enantiomer. The intra‐ and inter‐day precisions were in the ranges of 3.38–13.6 and 5.11–13.8 for LDP and 4.19–11.8 and 8.89–10.1 for DDP. Both LDP and DDP were found to be stable under different stability conditions. The method was successfully used in a stereoselective pharmacokinetic study of dropropizine enantiomers in rats following oral administration of racemate dropropizine at 100 mg/kg. The pharmacokinetic results indicate that the disposition of dropropizine enantiomers is not stereoselective and chiral inversion does not occur in rats.     

N‐Acetyl‐l‐tyrosine methyl ester monohydrate at 293 and 123 K

The crystal structure of a protected l ‐tyrosine, namely N‐acetyl‐l ‐tyrosine methyl ester monohydrate, C₁₂H₁₅NO₄·H₂O, was determined at both 293 (2) and 123 (2) K. The structure exhibits a network of O—H...O and N—H...O hydrogen bonds, in which the water molecule plays a crucial role as an acceptor of one and a donor of two hydrogen bonds. Molecules of water and of the protected l ‐tyrosine form hydrogen‐bonded layers perpendicular to [001]. C—H...π interactions are observed in the hydrophobic regions of the structure. The structure is similar to that of N‐acetyl‐l ‐tyrosine ethyl ester monohydrate [Soriano‐García (1993). Acta Cryst. C 49 , 96–97].     

A case of concomitant polymorphism and spontaneous resolution: the tetragonal phase of 5‐hydroxymethyl‐7,7,N‐trimethyl‐6‐oxabicyclo[3.2.1]octane‐1‐carboxamide

The title compound, C₁₂H₂₁NO₃, crystallizes in two polymorphic forms, viz. the tetragonal form described here and the monoclinic form described previously [Foces‐Foces, López‐Rodríguez, Pérez, Martín & Pérez‐Hernández (2007). Cryst. Growth Des. 7 , 905–911]. The differences in the conformations of the hydroxymethyl and methylaminocarbonyl substituents have important consequences in the hydrogen‐bond interaction motifs and, therefore, in the packing arrangements. These forms are concomitant polymorphs with melting points differing by 3 K.     

Voltammetric Detection of Thrombin by Labeling with Osmium Tetroxide Bipyridine and Binding with Aptamers on a Gold Electrode

This communication reports on electrochemical detection of thrombin based on labeling with osmium tetroxide bipyridine [OsO₄(bipy)]. Tryptophan amino acids can be labeled at the C−C‐double bond, and at least some tryptophan moieties are accessible for labeling in thrombin. Using the catalytic hydrogen signal from adsorptive stripping voltammetry performed on hanging mercury drop electrode, we could detect as little as 1.47 nM [OsO₄(bipy)]‐modified thrombin. We also tested the binding of [OsO₄(bipy)]‐modified thrombin with the classic thrombin binding aptamer (TBA) on gold electrodes. This preliminary study revealed that even after modification, a major part of the affinity was conserved, and that the aptamer self‐assembled monolayer (SAM) could be regenerated several times. Molecular simulations confirm that [OsO₄(bipy)]‐modified thrombin largely preserves the high binding affinity also of the alternative HD22 aptamer to thrombin, albeit at slightly reduced affinities due to steric hindrance when tryptophans 96 and 237 are labelled. Based on these simulations, compensatory modifications in the aptamer should result in significantly improved binding with labelled thrombin. This combined experimental‐computational approach lays the groundwork for the rational design of improved aptamer sensors for analytical applications.     

Facile preparation of monodisperse hollow cross‐linked chitosan microspheres

We have successfully prepared biocompatible and biodegradable hollow microspheres using carboxyl‐functionalized polystyrene particles as core template and the chitosan cross‐linked with glutaraldehyde as the shell. The monodisperse carboxyl‐functionalized polystyrene particles were made by emulsifier‐free emulsion polymerization. The structure, morphology, and constitution of the carboxyl‐functionalized polystyrene particles were characterized by FTIR, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X‐ray photoelectron spectroscopy (XPS). The structure, morphology, and formation process of the hollow cross‐linked chitosan microspheres were characterized by FTIR, SEM, and TEM. The results revealed that the latex particles were removed by exposed to solvent and the microspheres exhibited the hollow structure. This work confirmed that the hollow microspheres were accomplished by fabricating on the basis of chemical cross‐linking on the surface of the carboxyl‐functionalized polystyrene particles and then removing off the cores of particles. Moreover, with the increase of carboxyl‐functionalization degree at the surface of latexes and the increase of cross‐linking period, the thicker and firmer monodisperse hollow microspheres were obtained. In addition, a water‐soluble drug, salicylic acid, encapsulated in the microcapsules slowly released at pH 1.2. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 228–237, 2008     

Hyperfine‐Interaction‐Driven Suppression of Quantum Tunneling at Zero Field in a Holmium(III) Single‐Ion Magnet

An extremely rare non‐Kramers holmium(III) single‐ion magnet (SIM) is reported to be stabilized in the pentagonal‐bipyramidal geometry by a phosphine oxide with a high energy barrier of 237(4) cm⁻¹. The suppression of the quantum tunneling of magnetization (QTM) at zero field and the hyperfine structures originating from field‐induced QTMs can be observed even from the field‐dependent alternating‐current magnetic susceptibility in addition to single‐crystal hysteresis loops. These dramatic dynamics were attributed to the combination of the favorable crystal‐field environment and the hyperfine interactions arising from ¹⁶⁵Ho (I =7/2) with a natural abundance of 100 %.     

Theoretical Investigation on Electronic Transition of Tris(8-quinolinolate) Aluminum Grafted on Poly(p-phenylenevinylene) Units with the Localized-density-matrix Method

An unsystematic molecule PPV‐Alq₃ [3‐(4‐((E)‐2‐(8‐hydroxy‐3‐(4‐styrylstyryl)quinolin‐Alq₂‐6‐yl)vinyl)‐ styryl)‐6‐(4‐styrylstyryl)quinolin‐8‐olate‐Alq₂; q=8‐quinolinolate], which combines poly(p‐phenylenevinylene) with tris(8‐quinolinolate)aluminum, has been studied using a localized‐density‐matrix method. The absorption spectra and electronic transition properties were analyzed and compared with both intermediate neglect of the differential overlap method and the localized‐density‐matrix method. Great efforts have been made on investigating conjugated system on the absorption properties as these can be particularly important for many applications. Two different absorptions of the special molecule, tris(8‐quinolinolate)aluminum grafted on poly(p‐phenylenevinylene) units, were further discussed with density matrices. For the molecule, the first absorption peak is at 413 nm near the purple light. Two 8‐hydroxyquinolines have very slight electronic transition properties. Another absorption peak is at 237 nm. The second characteristic peak of molecule is completely different from that of the first one, which comes from contribution of 8‐hyroxyquinolines in the two different side chains. Our studies show that electronic transition properties of poly(p‐phenylenevinylene) can be effectively tuned by grafting tris(8‐quinolinolate)‐aluminum on poly(p‐phenylenevinylene) from the standpoint of transition energies, frontier molecular orbitals and density matrices.     

Crystal Structure of the T(6‐4)C Lesion in Complex with a (6‐4) DNA Photolyase and Repair of UV‐Induced (6‐4) and Dewar Photolesions

UV‐light irradiation induces the formation of highly mutagenic lesions in DNA, such as cis‐syn cyclobutane pyrimidine dimers (CPD photoproducts), pyrimidine(6‐4)pyrimidone photoproducts ((6‐4) photoproducts) and their Dewar valence isomers ((Dew) photoproducts). Here we describe the synthesis of defined DNA strands containing these lesions by direct irradiation. We show that all lesions are efficiently repaired except for the T(Dew)T lesion, which cannot be cleaved by the repair enzyme under our conditions. A crystal structure of a T(6‐4)C lesion containing DNA duplex in complex with the (6‐4) photolyase from Drosophila melanogaster provides insight into the molecular recognition event of a cytosine derived photolesion for the first time. In light of the previously postulated repair mechanism, which involves rearrangement of the (6‐4) lesions into strained four‐membered ring repair intermediates, it is surprising that the not rearranged T(6‐4)C lesion is observed in the active site. The structure, therefore, provides additional support for the newly postulated repair mechanism that avoids this rearrangement step and argues for a direct electron injection into the lesion as the first step of the repair reaction performed by (6‐4) DNA photolyases.     

Fluorescence spectroscopy and thermal relaxation processes of anthracenyl‐labeled polysiloxanes

A fluorescent silicone network was prepared by a hydrosilylation reaction using poly(dimethylsiloxane‐co‐methylhydrogensiloxane) terminated by dimethylhydrogensilyloxy groups, poly(dimethylsiloxane‐co‐methylvinylsiloxane) terminated by dimethylvinylsilyloxy groups and 9‐vinylanthracene, as the fluorescent group. These silicone‐based materials were strongly fluorescent. Steady state emission was a convenient technique to prove that reaction occurred, based on the blue‐shift of the emission from anthracenyl moieties compared with the 9‐vinylanthracene. Thermal transitions were studied by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA) and by fluorescence spectroscopy, indicating that networks with and without lumophores had similar thermal properties. Networks with and without lumophores had the same swelling capability in toluene. Fluorescence spectroscopy was a more sensitive technique to the onset of the glass transition temperature (T = 145 K) than DSC or DMA. Nevertheless, the crystallization temperature at 192 K was determined more precisely by DSC, and the melting point at 237 K was indentified more clearly by both DSC and DMA. These three techniques provided complementary information about transitions in silicone networks. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 74–81, 2010     

Synthesis and characterization of fully aliphatic polyimides from an aliphatic dianhydride with piperazine spacer for enhanced solubility,transparency, and low dielectric constant

A new series of fully aliphatic polyimide (API) based on a novel aliphatic dianhydride monomer‐2,2′‐(1,4‐piperazinediyl)‐disuccinic anhydride (PDA), in which two units of succinic anhydride have been connected by an aliphatic heterocyclic piperazine spacer that possesses aminomethylene (‐NCH₂) moiety in the aliphatic/alicylic backbone capable of inducing charge transfer (CT) interactions in the polyimide network, was successfully synthesized. The APIs were soluble in common polar organic solvents. The polyimide films of PDA with alicyclic diamines were almost colorless. T₁₀ (temperature of 10% weight loss) of APIs were ranged from 299–418 °C and T_g of API3‐API6 were in the temperature range of 170 to 237 °C. The light‐colored polyimide films of API3‐API6 possessed good mechanical properties with tensile strength of 54–72 Mpa, tensile modulus of 1.6–2.3 Gpa and elongation at break of 4–9%. The polyimide films of API3‐API6 were highly flexible and free‐standing which is quite rare in fully APIs. The dielectric constant of one of the synthesized API (API4) was as low as 2.14. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2316–2328     

Nickel peroxide: A more probable intermediate in the Ni(II)‐catalyzed decomposition of peroxomonosulfate

The Ni(II) ion catalyzed thermal decomposition of peroxomonosulfate (PMS) was studied in the pH range 3.42–5.89. The rate is first order in [PMS] and Ni(II) ion concentrations. At pH greater than or equal to 5.23, the reaction becomes zero order in [PMS] and this changeover in the order of the reaction occurs at a higher concentration of nickel ions. The first‐order kinetics in PMS can be explained as a rate‐limiting step and is the transformation of nickel peroxomonosulfate into nickel peroxide. This peroxide intermediate reacts rapidly with another PMS to give oxygen and Ni(II). The formation of nickel peroxide is associated with a small negative or nearly zero entropy of activation. The zero‐order kinetics in [PMS] can be explained by the fact that the hydrolysis of aquated nickel(II) ions into hydroxocompounds is the rate‐limiting step. The turnover number is 2 at pH 3.42 and increases with pH. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 320–237, 2007     

Rapid Determination of the Antioxidant Capacity of Lettuce by an E‐Tongue Based on Flow Injection Coulometry

This work proposes the use of an electronic tongue based on flow injection coulometry for the rapid determination of the antioxidant capacity of fresh lettuce. The e‐tongue consisted of a series of 16 porous carbon electrodes, each poised at a fixed potential from +100 to +850 mV. Each injection leaded to a characteristic hydrodynamic voltammogram, whose profile reflects the composition of antioxidants. The correlation between the peak area recorded by each sensor and the 1,1‐Diphenyl‐2‐picryl‐hydrazyl (DPPH) assay was maximum ín the range of potentials between +400 and 750 mV (R2>0.97). Accordingly, the charge measured provided a direct and simple index of the antioxidant capacity. The practical utility of such index was initially demonstrated by determining the best extraction conditions. This consisted in freeze‐drying of lettuce followed by methanolic extraction. Later, the e‐tongue was used to evaluate the effect of storage (one week at 5 °C) on lettuce. The e‐tongue revealed that lettuce lost up to 25 % of their initial antioxidant activity during storage. However, when lettuce samples were pre‐treated with fast cooling or vacuum cooling, the decrease of the antioxidant index was limited to 14 and 15 %. Overall, the e‐tongue is a rapid, simple and sensitive method for the determination of the antioxidant capacity of fresh lettuce samples. Indirectly, these findings suggest also that lettuce may serve as potential dietary sources of natural phenolic antioxidants.     

Total Synthesis of (−)‐Haouamine B Pentaacetate and Structural Revision of Haouamine B

The enantiocontrolled total synthesis of (?)‐haouamine B pentaacetate was accomplished via an optically active indane‐fused β‐lactam, which was prepared by a newly developed Friedel–Crafts reaction. Subsequent cleavage of the β‐lactam and an intramolecular McMurry coupling reaction provided the core indane‐fused tetrahydropyridine, which led to the elucidation of the structure, as proposed by Trauner and Zubía.     

Novel organosoluble and colorless poly(ether imide)s based on 3,3‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]phthalide dianhydride and aromatic bis(ether amine)s bearing pendent trifluoromethyl groups

A novel series of colorless and highly organosoluble poly(ether imide)s were prepared from 3,3‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]phthalide dianhydride with various fluorinated aromatic bis(ether amine)s via a conventional two‐stage process that included ring‐opening polyaddition to form the poly(amic acid)s followed by cyclodehydration to produce the polymer films. The poly(ether imide)s showed excellent solubility, with most of them dissoluble at a concentration of 10 wt % in amide polar solvents, in ether‐type solvents, and even in chlorinated solvents. Their films had a cutoff wavelength between 358 and 373 nm, and the yellowness index ranged from 3.1 to 9.5. The glass‐transition temperatures of the poly(ether imide) series were recorded between 237 and 297 °C, the decomposition temperatures at 10% weight loss were all above 494 °C, and the residue was more than 54% at 800 °C in nitrogen. These films showed high tensile strength and also were characterized by higher solubility, lighter color, and lower dielectric constants and moisture absorption than an analogous nonfluorinated polyimide series. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3140–3152, 2006     

Synthesis and ring transformation of substituted S‐(1‐phenylpyrrolidine‐2‐ones‐3‐yl)isothiuronium salts to substituted 2‐imino‐5‐[2‐(phenylamino)ethyl]thiazolidin‐4‐ones

Dedicated to Professor Jaromír Kaválek on the occasion of his 65^th birthday Substituted S‐(1‐phenylpyrrolidin‐2‐on‐3‐yl)isothiuronium salts in weakly basic media undergo intramolecular recyclisation reaction in which the γ‐lactam cycle is split and a thiazolidine cycle is formed. A series of six substituted 2‐imino‐5‐[2‐(phenylamino)ethyl]‐thiazolidin‐4‐ones have been prepared by this reaction.     

The Role of Oxidative Debris on Graphene Oxide Films

We study the effect of oxidative impurities on the properties of graphene oxide and on the graphene oxide Langmuir–Blodgett films (LB). The starting material was grupo Antolín nanofibers (GANF) and the oxidation process was a modified Hummers method to obtain highly oxidized graphene oxide. The purification procedure reported in this work eliminated oxidative impurities decreasing the thickness of the nanoplatelets. The purified material thus obtained presents an oxidation degree similar to that achieved by chemical reduction of the graphite oxide. The purified and non‐purified graphene oxides were deposited onto silicon by means of a Langmuir–Blodgett (LB) methodology. The morphology of the LB films was analyzed by field emission scanning microscopy (FE‐SEM) and micro‐Raman spectroscopy. Our results show that the LB films built by transferring Langmuir monolayers at the liquid‐expanded state of the purified material are constituted by close‐packed and non‐overlapped nanoplatelets. The isotherms of the Langmuir monolayer precursor of the LB films were interpreted according to the Volmer’s model.     

Thermal characterization and solid‐state 13C‐NMR investigation of blends of poly(N‐phenyl‐2‐hydroxytrimethylene amine) and poly(N‐vinyl pyrrolidone)

The miscibility and thermal properties of poly(N‐phenyl‐2‐hydroxytrimethylene amine)/poly(N‐vinyl pyrrolidone) (PHA/PVP) blends were examined by using differential scanning calorimetry (DSC), high‐resolution solid‐state nuclear magnetic resonance (NMR) techniques, and thermogravimetric analysis (TGA). It was found that PHA is miscible with PVP, as shown by the existence of a single composition‐dependent glass transition temperature (T_g) in the whole composition range. The DSC results, together with the ¹³C crosspolarization (CP)/magic angle spinning (MAS)/high‐power dipolar decoupling (DD) spectra of the blends, revealed that there exist rather strong intermolecular interactions between PHA and PVP. The increase in hydrogen bonding and in T_g of the blends was found to broaden the line width of CH—OH carbon resonance of PHA. The measurement of the relaxation time showed that the PHA/PVP blends are homogeneous at least on the scale of 1–2 nm. The proton spin‐lattice relaxation in both the laboratory frame and the rotating frame were studied as a function of the blend composition, and it was found that blending did not appreciably affect the spectral densities of motion (sub‐T_g relaxation) in the mid‐MHz and mid‐KHz frequency ranges. Thermogravimetric analysis showed that PHA has rather good thermal stability, and the thermal stability of the blend can be further improved with increasing PVP content. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 237–245, 1999     

Core Crosslinking of Biodegradable Block Copolymer Micelles Based on Poly(ester carbonate)

A biodegradable amphiphilic block copolymer, PEG‐b‐P(LA‐co‐MAC), was used to prepare spherical micelles consisting of a hydrophobic P(LA‐co‐MAC) core and a hydrophilic PEG shell. To improve their stability, the micelles were crosslinked by radical polymerization of the double bonds in the hydrophobic blocks. The crosslinked micelles had similar sizes and a narrow size distribution compared to their uncrosslinked precursor. The improved stability of the crosslinked micelles was confirmed by measurements of the CMC and a thermodynamic investigation. These micelles can internalize into Hela cells in vitro as demonstrated by inverted fluorescence microscopy and CLSM. These stabilized nanoscale micelles have potential use in biomedical applications such as drug delivery and disease diagnosis.

     

Estimation of <Superscript>235</Superscript>U concentration in some depleted uranium samples by high resolution gamma-ray spectrometry using 185 keV and 1001 keV gamma-energies of <Superscript>235</Superscript>U and <Superscript>234m</Superscript>Pa

The migration of ²³⁷Np in an undisturbed Chinese loess column was investigated by direct γ-ray method. The column was taken from a field test site and installed in a laboratory simulation hall. Radionuclide ²³⁷Np in the form of neptunium nitrate, mixed with quartz, was introduced into the column and covered with loess. Artificial rainfall was applied to the column for about 3 years and, the counting rates of ²³⁷Np in the column from 56 to 616 days at different vertical positions were detected with a γ-ray detection system. Based on the counting rates of ²³⁷Np in the simulation column at different vertical positions and the distance from the source layer, the relationship of the mass center of ²³⁷Np in the column at different experimental periods to the experimental time was established, C _m = 0.36 log(t)-2.75. Here C _m is the mass center of ²³⁷Np in the column, cm, and t is the experimental time in days. Based on this relationship, the mass center of ²³⁷Np for the 1,073-day experiment was predicted and compared to that obtained with the final destructive method. The good agreement between the prediction and the experimental values indicates that the direct γ-ray method could be used to predict the migration of strongly adsorbed radionuclides such as ²³⁷Np in environmental media with the help of laboratory simulation columns.