2D aggregate sizing by combining laser-induced incandescence (LII) and elastic light scattering (ELS)

The combination of laser-induced incandescence and elastic light scattering has been further developed to allow for a quantitative two-dimensional determination of characteristic properties of soot aggregates, namely radius of gyration R _g and number N _p of primary particles per aggregate. In demonstrating the principle of the method, we have in a first approach approximated the particle ensemble as monodisperse and used a structure factor with an exponential cut-off function. Nonetheless, experiments performed on a laminar premixed ethene flame demonstrate basically good agreement with observations from literature and data from electron microscopy on thermophoretically obtained samples.     

Soot volume fraction measurements in aero-engine exhausts using extinction-calibrated backward laser-induced incandescence

Control and reduction of soot particle emissions from aeronautic turbines requires a monitoring system suitable for quantification of these emissions. Currently, such emissions are estimated using the technique of smoke number. This is an extractive method, which is not sensitive enough for the low emission levels of modern gas turbines. Within a recent European project, AEROTEST, part of the project aimed at investigating an alternative soot monitoring technique, laser-induced incandescence (LII) as an in-situ optical diagnostic for quantification of soot emissions. For aero-engine applications, especially those involving large-scale turbines, it is necessary to perform the measurements at long distance from the turbine. The LII technique is favourable in this respect as it provides for non-intrusive measurements and, by detecting the isotropic LII signal along the same axis as the incoming laser beam (so called backward LII), both the laser and the detector can be built inside one system located several meters from the turbine. The concept was initiated in the previous European projects, AEROJET I and II. This paper describes the modified version of the system and the procedure developed to achieve reliable and quantitative soot volume fraction measurements in the exhausts of aero-engines. Application of the backward LII technique is demonstrated in the exhaust of a military turbojet engine for different engine speeds.     

Modeling laser-induced incandescence of soot: a summary and comparison of LII models

We have performed a comparison of ten models that predict the temporal behavior of laser-induced incandescence (LII) of soot. In this paper we present a summary of the models and comparisons of calculated temperatures, diameters, signals, and energy-balance terms. The models were run assuming laser heating at 532 nm at fluences of 0.05 and 0.70 J/cm² with a laser temporal profile provided. Calculations were performed for a single primary particle with a diameter of 30 nm at an ambient temperature of 1800 K and a pressure of 1 bar. Preliminary calculations were performed with a fully constrained model. The comparison of unconstrained models demonstrates a wide spread in calculated LII signals. Many of the differences can be attributed to the values of a few important parameters, such as the refractive-index function E(m) and thermal and mass accommodation coefficients. Constraining these parameters brings most of the models into much better agreement with each other, particularly for the low-fluence case. Agreement among models is not as good for the high-fluence case, even when selected parameters are constrained. The reason for greater variability in model results at high fluence appears to be related to solution approaches to mass and heat loss by sublimation. PACS 65.80.+n; 78.20.Nv; 42.62.-b; 44.05.+e     

Measurement of soot morphology by integrated LII and elastic light scattering

A compact experimental setup that integrates laser-induced incandescence (LII) and one-angle elastic light scattering (1A-ELS) to measure the size of polydisperse soot aggregates is described. A 532 nm laser and a detection angle of 35 degrees were employed, which provided sensitivity for aggregate radius of gyrations (R _g) of R _g≤200 nm. Both lognormal and self-preserving distribution functions are compared with width parameters derived from both aggregation theory and transmission electron microscopy (TEM) measurements. Using these distributions, mean aggregate sizes derived from the scattering measurements are compared. The LII+1A-ELS technique is validated with a two-angle elastic light scattering (2A-ELS) approach with an additional detection angle at 145 deg. Unlike LII+1A-ELS, the 2A-ELS technique has the advantage of not requiring knowledge of soot optical properties. Good agreement is found between the two techniques for a given distribution. A fundamental discrepancy exists between distributions derived from TEM and those according to aggregation theory, limiting the accuracy of both 2A-ELS and LII+1A-ELS. The dependence of both techniques on laser fluence and hence soot temperature is examined and discussed.     

Experimental and theoretical comparison of spatially resolved laser-induced incandescence (LII) signals of soot in backward and right-angle configuration

In-situ measurements of soot volume fraction in the exhausts of jet engines can be carried out using the laser-induced incandescence (LII) technique in backward configuration, in which the signal is detected in the opposite direction of the laser beam propagation. In order to improve backward LII for quantitative measurements, we have in this work made a detailed experimental and theoretical investigation in which backward LII has been compared with the more commonly used right-angle LII technique. Both configurations were used in simultaneous visualization experiments at various pulse energies and gate timings in a stabilized methane diffusion flame. The spatial near-Gaussian laser energy distribution was monitored on-line as well as the time-resolved LII signal. A heat and mass transfer model for soot particles exposed to laser radiation was used to theoretically predict both the temporal and spatial LII signals. Comparison between experimental and theoretical LII signals indicates similar general behaviour, for example the broadening of the spatial LII distribution and the hole-burning effect at centre of the beam due to sublimation for increasing laser pulse energies. However, our comparison also indicates that the current heat and mass transfer model overpredicts signal intensities at higher fluence, and possible reasons for this behaviour are discussed. PACS 42.62.Fi; 44.40.+a     

Quantitative measurement of hydroxyl radical(OH) concentration in premixed flat flame by combining laser-induced fluorescence and direct absorption spectroscopy

An accurate and reasonable technique combining direct absorption spectroscopy and laser-induced fluorescence(LIF)methods is developed to quantitatively measure the concentrations of hydroxyl in CH_4/air flat laminar flame. In our approach, particular attention is paid to the linear laser-induced fluorescence and absorption processes, and experimental details as well. Through measuring the temperature, LIF signal distribution and integrated absorption, spatially absolute OH concentrations profiles are successfully resolved. These experimental results are then compared with the numerical simulation. It is proved that the good quality of the results implies that this method is suitable for calibrating the OH-PLIF measurement in a practical combustor.     

Investigations of soot formation in an optically accessible gasoline direct injection engine by means of laser-induced incandescence (LII)

This study presents the results of laser-induced incandescence (LII) measurements in an optically accessible gasoline direct injection engine. The focus was to evaluate LII as a particle measurement technique which is able to provide a deeper understanding of the underlying reaction and formation processes of soot in order to optimize the injection system to reduce exhaust gas emissions. A comparison of time-resolved LII, based on the model described by Michelsen, with an Engine Exhaust Particle Sizer (EEPS) was performed. In this context, the air–fuel ratio, the injection pressure and the injection timing have been varied while applying the measurement techniques in the exhaust system. In case of a variation of the air–fuel ratio, two-dimensional LII has been performed in the combustion chamber additionally. For each measurement, the Filter Smoke Number (FSN) was taken into account as well. Finally, a good agreement of the different techniques was achieved. Moreover, we found that by combining time-resolved LII and EEPS a differentiation of primary particles and agglomerates is possible. Consequently, a determination of the processes in the combustion chamber and agglomeration in the exhaust gas is feasible.     

On the dependence of the laser-induced incandescence (LII) signal on soot volume fraction for variations in particle size

“The laser-induced incandescence (LII) signal is proportional to soot volume fraction” is an often used statement in scientific papers, and it has – within experimental uncertainties – been validated in comparisons with other diagnostic techniques in several investigations. In 1984 it was shown theoretically in a paper by Melton that there is a deviation from this statement in that the presence of larger particles leads to some overestimation of soot volume fractions. In the present paper we present a detailed theoretical investigation of how the soot particle size influences the relationship between LII signal and soot volume fraction for different experimental conditions. Several parameters have been varied; detection wavelength, time and delay of detection gate, ambient gas temperature and pressure, laser fluence, level of aggregation and spatial profile. Based on these results we are able, firstly, to understand how experimental conditions should be chosen in order to minimize the errors introduced when assuming a linear dependence between the signal and volume fraction and secondly, to obtain knowledge on how to use this information to obtain more accurate soot volume fraction data if the particle size is known. PACS 42.62.-b; 44.40.+a; 61.46.Df; 78.70.-g; 65.80.+n     

2D imaging of laser wing effects and of soot sublimation in laser-induced incandescence measurements

The distribution of Laser-Induced Incandescence (LII) signal in sooting flames along the laser beam is imaged using two directions of observation: one counter to the propagation direction of the incident laser (backward LII) and one at right angles. It is shown that the effective probe volume, in which the LII signal is observed, is highly dependent on the laser irradiance profile. At high fluence, the LII from the central part of the beam decreases because of soot sublimation. This decrease can be compensated by an increase in the LII from the wings of the laser beam. This interaction is particularly important in the extraction of quantitative information in the backward LII case, which is the configuration best suited to the practical application of LII for in-situ particle concentration measurements in the exhaust of aero-engines.     

Soot particulate size characterization in a heavy-duty diesel engine for different engine loads by laser-induced incandescence

Time-resolved laser-induced incandescence was used to estimate primary particle size distributions inside the combustion chamber of a heavy-duty diesel engine as a function of the crank angle, for two different engine loads at two different probe locations. Assuming a log-normal particle size distribution, an increase of the mean primary particle size was seen during the first stages of the combustion cycle, followed by a decrease later on during the combustion process.     

Instantaneous in-flame measurement of soot volume fraction, primary particle diameter, and aggregate radius of gyration via auto-compensating laser-induced incandescence and two-angle elastic light scattering

A new combination of soot diagnostics employing two-angle elastic light scattering and laser-induced incandescence is described that is capable of producing non-intrusive, instantaneous, and simultaneous, in situ measurements of soot volume fraction, primary particle size, and aggregate radius of gyration within flames. Controlled tests of the new apparatus on a well-characterized laminar flame show good agreement with existing measurements in the literature. From a detailed and comprehensive Monte Carlo uncertainty analysis of the results, it was found that the uncertainty in all three measured parameters is dominated by knowledge of soot properties and aggregation behavior. The soot volume fraction uncertainty is dominated by uncertainty in the soot refractive index light absorption function; the primary particle diameter uncertainty is dominated by uncertainty in the fractal prefactor; while the uncertainty in the aggregate radius of gyration is dominated by the uncertainty in the width of the distribution of aggregate sizes.     

Stabilization of a premixed CH4/O2/N2 flame using femtosecond laser-induced plasma

The influence of femtosecond laser-induced plasma (FLIP) on the stability of a premixed CH(4)/O(2)/N(2) flame is investigated at atmospheric pressure. The laser energy, laser repetition rate, the equivalence ratios, and the volume percentage of oxygen in O(2)/N(2) blends are varied. Our findings indicate that the flame blow-off velocity is a function of these parameters. It has been experimentally found that the flame blow-off velocity increases by a factor of two with FLIP than without FLIP. A high-repetition-rate and a great energy laser-induced plasma flameholding, as a non-intrusive optical flameholding, may be a feasible alternative for any combustor.     

Soot formation characteristics in a lab-scale turbulent pulverized coal flame with simultaneous planar measurements of laser induced incandescence of soot and Mie scattering of pulverized coal

Soot formation characteristics of a lab-scale pulverized coal flame were investigated by performing carefully controlled laser diagnostics. The spatial distributions of soot volume fraction and the pulverized coal particles were measured simultaneously by laser induced incandescence (LII) and Mie scattering imaging, respectively. In addition, the radial distributions of the soot volume fraction were compared with the OH radical fluorescence, gas temperature and oxygen concentration obtained in our previous studies [1], [2]. The results indicated that the laser pulse fluence used for LII measurement should be carefully controlled to measure the soot volume fraction in pulverized coal flames. To precisely measure the soot volume fraction in pulverized coal flames using LII, it is necessary to adjust the laser pulse fluence so that it is sufficiently high to heat up all the soot particles to the sublimation temperature but also sufficiently low to avoid including a too large of a change in the morphology of the soot particles and the superposition of the LII signal from the pulverized coal particles on that from the soot particles. It was also found that the radial position of the peak LII signal intensity was located between the positions of the peak Mie scattering signal intensity and peak OH radical signal intensity. The region, in which LII signal, OH radical fluorescence and Mie scattering coexisted, expanded with increasing height above the burner port. It was also found that the soot formation in pulverized coal flames was enhanced at locations where the conditions of high temperature, low oxygen concentration and the existence of pulverized coal particles were satisfied simultaneously.     

Determination of spatial temperature distributions in a laminar premixed ethylene/air flame by laser-induced atomic fluorescence

A quick and simple detection system for spatially resolved temperature measurements in flames based on laser-induced thermally assisted atomic line fluorescence of seeded rubidium atoms is described. The fluorescence light from two atomic states is dispersed and simultaneously recorded by a CCD camera. The fluorescence ratio distributions lead directly to absolute temperature distributions. The practical use, the spatial and temperature resolution and error limits of the method are discussed and compared with other procedures for temperature measurements.     

Analysis of uncertainties in instantaneous soot volume fraction measurements using two-dimensional, auto-compensating, laser-induced incandescence (2D-AC-LII)

Laser-induced incandescence (LII) is an optical measurement technique capable of measuring soot volume fraction over a wide range of conditions. However, development of two-dimensional auto-compensating LII (2D-AC-LII) in the literature has been limited and until now, instantaneous measurements have not been demonstrated. In this paper, we successfully demonstrate instantaneous 2D-AC-LII soot volume fraction (SVF) measurements in an ethylene-air co-annular diffusion flame. Results were then used to support a detailed uncertainty analysis based on a Monte-Carlo simulation. Agreement between both the instantaneous and average SVF measurements with published data from attenuation measurements under identical conditions was found to be good. Uncertainties are discussed both in terms of an overall accuracy of the SVF measurement, which is strongly dominated by uncertainty in the optical properties of soot, and the comparative uncertainties with optical properties fixed. The uncertainty in an instantaneous 2D determination of SVF for a comparative measurement is dominated by photon shot noise, and in regions of high soot volume fraction it is below 25% (95% confidence interval). Shot noise uncertainty could be further reduced with additional pixel averaging at the expense of spatial resolution. This diagnostic shows significant promise for quantitative planar soot concentration measurements within turbulent flames.