Relationship between soot volume fraction and LII signal in AC-LII: effect of primary soot particle diameter polydispersity

Theoretical analysis and numerical calculations were conducted to investigate the relationship between soot volume fraction and laser-induced incandescence (LII) signal within the context of the auto-compensating LII technique. The emphasis of this study lies in the effect of primary soot particle diameter polydispersity. The LII model was solved for a wide range of primary soot particle diameters from 2 to 80 nm. For a log-normally distributed soot particle ensemble encountered in a typical laminar diffusion flame at atmospheric pressure, the LII signals at 400 and 780 nm were calculated. To quantify the effects of sublimation and differential conduction cooling on the determined soot volume fraction in auto-compensating LII, two new quantities were introduced and demonstrated to be useful in LII study: an emission intensity distribution function and a scaled soot volume fraction. When the laser fluence is sufficiently low to avoid soot mass loss due to sublimation, accurate soot volume fraction can be obtained as long as the LII signals are detected within the first 200 ns after the onset of the laser pulse. When the laser fluence is in the high fluence regime to induce significant sublimation, however, the LII signals should be detected as early as possible even before the laser pulse reaches its peak when the laser fluence is sufficiently high. The analysis method is shown to be useful to provide guidance for soot volume fraction measurements using the auto-compensating LII technique.     

Pulsed-laser generation of gold nanoparticles with on-line surface plasmon resonance detection

Size of nanoparticles is an important parameter for their applications. The real-time monitoring is required for reliable and reproducible production of nanoparticles with controllable size. We present results of our research on development of the system for the online nanoparticle characterization during their production by a laser. The laser ablation chamber which allows measurements of surface plasmon resonance spectra during the nanoparticle generation process has been designed and fabricated. The online characterization system was tested by producing and modification of gold nanoparticles. Nanoparticles were generated by nanosecond-laser (wavelength 1064 nm) ablation of gold target in deionized water, and optimal conditions for the highest nanoparticle productivity were estimated. The mean diameter of nanoparticles was determined using their absorption spectra measured in the real-time during the ablation experiments and from the TEM images analysis, and it varied from 20 to 45 nm. The mismatch between nanoparticle diameters, estimated using these two methods, is due to the polydispersity of the generated nanoparticles. The further experiments of laser-induced modification of colloidal gold nanoparticles were carried out using second harmonic (wavelength 532 nm) of nanosecond Nd:YAG laser and alteration in nanoparticle size were acquired by the online measurement system.     

Laser-induced incandescence for soot particle size and volume fraction measurements using on-line extinction calibration

A novel technique for two-dimensional measurements of soot volume fraction and particle size has been developed. It is based on a combined measurement of extinction and laser-induced incandescence using Nd:YAG laser wavelengths of 532 nm and 1064 nm. A low-energy laser pulse at 532 nm was used for extinction measurements and was followed by a more intense pulse at 1064 nm, delayed by 15 ns, for LII measurements. The 532-nm beam was split into a signal beam passing the flame and a reference beam, both of which were directed to a dye cell. The resulting fluorescence signals, from which the extinction was deduced, together with the LII signal, were registered on a single CCD detector. Thus the two-dimensional LII image could be converted to a soot volume fraction map through a calibration procedure during the same laser shot. The soot particle sizes were evaluated from the ratio of the temporal LII signals at two gate time positions. The uncertainty in the particle sizing arose mainly from the low signal for small particles at long gate times and the uncertainty in the flame temperature. The technique was applied to a well-characterized premixed flat flame, the soot properties of which had been previously thoroughly investigated. Received: 21 June 2000 / Revised version: 11 September 2000 / Published online: 7 February 2001     

Ultrafast laser ablative generation of gold nanoparticles: the influence of pulse energy, repetition frequency and spot size

Previous studies investigating the role of the operating parameters on ultrafast laser ablative generation of gold nanoparticles have reported a wide range of nanoparticle size distribution and plasmon resonant properties. In some cases the reported role of fluence and other processing parameters is contradictory. In this systematic investigation, we deconstruct and examine the role of the component parts of fluence, namely pulse energy and ablation spot size, on nanoparticle generation. Other parameters such as exposure time and scan speed are also studied. We show that the nanoparticle average size and distribution is related to different contributions from pulse energy, pulse repetition frequency and spot size. We also correlate the average particle size and distribution with the wavelength and width of the plasmon resonance peak, and apply Mie theory in order to develop clearer physical insights into the mechanisms dominating nanoparticle generation.     

Interaction of gold nanoparticles with nanosecond laser pulses: Nanoparticle heating

Theoretical and experimental results on the heating process of gold nanoparticles irradiated by nanosecond laser pulses are presented. The efficiency of particle heating is demonstrated by in-vitro photothermal therapy of human tumor cells. Gold nanoparticles with diameters of 40 and 100 nm are added as colloid in the cell culture and the samples are irradiated by nanosecond pulses at wavelength of 532 nm delivered by Nd:YAG laser system. The results indicate clear cytotoxic effect of application of nanoparticle as more efficient is the case of using particles with diameter of 100 nm. The theoretical analysis of the heating process of nanoparticle interacting with laser radiation is based on the Mie scattering theory, which is used for calculation of the particle absorption coefficient, and two-dimensional heat diffusion model, which describes the particle and the surrounding medium temperature evolution. Using this model the dependence of the achieved maximal temperature in the particles on the applied laser fluence and time evolution of the particle temperature is obtained.     

Silver nanoparticles produced by PLD in vacuum: role of the laser wavelength used

In this work we report the results of investigation of silver (Ag) nanoparticles prepared on a silica substrate by laser ablation. Our attention was focused on the mean diameter, size distribution and optical absorption properties of nanoparticles prepared in vacuum by using different laser wavelengths. The fundamental wavelength and the second, third, and fourth harmonics of a nanosecond Nd:YAG laser were used for nanoparticles fabrication. The corresponding values of the laser fluence for each wavelength were: 0.6 J/cm² at 266 nm, 0.8 J/cm² at 355 nm, 2.8 J/cm² at 532 nm, and 2 J/cm² at 1064 nm. The Ag nanoparticles produced have mean diameters in the range from 2 nm to 12 nm as the nanoparticles’ size decreases with the decrease of the wavelength used. The presence of the Ag nanoparticles was also evidenced by the appearance of a strong optical absorption band in the measured UV-VIS spectra associated with surface plasmon resonance (SPR). A redshift and widening of the absorption peak were observed as the laser wavelength was increased. Some additional investigations were performed in order to clarify the structure of the Ag nanoparticles.     

In-situ study of Ag nanoparticle hydrosol optical spectra evolution during laser ablation/fragmentation

The results of in-situ monitoring of a laser fragmentation process of a largely polydisperse and morphologically heterogeneous citrate-reduced Ag hydrosol containing a fraction of Ag nanowires are presented. The laser fragmentation was performed using several wavelengths of the incident laser pulses (1064, 532 and 355 nm). Surface plasmon extinction spectra monitoring the nanoparticle fragmentation process were acquired pulse by pulse and related to transmission electron microscopy (TEM) images and statistical TEM image analysis of Ag nanoparticles collected in selected stages of the fragmentation. It was found that, due to different interactions of the laser pulses of various wavelengths with a specific fraction of the Ag nanoparticles in the hydrosol, the course of the fragmentation process depends on the wavelength, leading to different size distributions of the nanoparticles in the resulting hydrosol. The laser pulses of 532 nm wavelength are the most effective for the fragmentation process of the citrate-reduced Ag hydrosol, yielding the narrowest size distribution and the smallest mean radius of the Ag nanoparticles. PACS 81.07.-b; 73.21.-b; 81.16.-c     

Application of laser-induced incandescence to suspended carbon black particles

For the first time, to the best of our knowledge, laser-induced incandescence (LII) has successfully been applied to carbon black suspensions. A linear correlation between the experimentally derived signal decay time and the mean primary particle size, determined by transmission electron microscopy, for different carbon black particles was found. Moreover, a nonlinear relation similar to that known from measurements of aerosols was observed for the peak LII signal and the laser fluence. Despite different heat transfer properties, the signal decay time was not influenced by the solvents used.     

Effect of aggregation on the absorption cross-section of fractal soot aggregates and its impact on LII modelling

This study concerns the effect of particle aggregation on laser heating rate of soot aggregates in laser-induced incandescence. Three aggregate absorption models were investigated: the Rayleigh-Debye-Gans approximation, the electrostatics approximation, and the numerically exact generalized multi-sphere Mie-solution method. Fractal aggregates containing 5-893 primary particles of 30 nm in diameter were generated numerically using a combined particle-cluster and cluster-cluster aggregation algorithm with specific fractal parameters typical of soot. The primary particle size parameters considered are 0.089, 0.177, and 0.354. The Rayleigh-Debye-Gans approximation neglects the effect of particle aggregation on absorption; so it underestimates the aggregate absorption cross-section area by approximately 10%, depending on the aggregate size and primary particle size parameter. The electrostatics approximation is somewhat better than the Rayleigh-Debye-Gans approximation, but cannot account for the effect of primary particle size parameter. The aggregate absorption submodel affects the calculated soot temperature in laser-induced incandescence mainly in the low laser fluence regime. At high laser fluences, the effect diminishes due to the enhanced importance of soot sublimation cooling and neglect of aggregation effect in the sublimation in the present numerical model of laser-induced incandescence.     

Analysis of thermal radiation from laser-heated nanoparticles formed by laser-induced decomposition of ferrocene

Thermal radiation, originating from laser-heated gas-phase nanoparticles, was detected in the 400–700 nm wavelength range by means of optical emission spectroscopy. The particles were formed upon laser-induced photolytic decomposition of ferrocene (Fe(C₅H₅)₂) and consisted of an iron core surrounded by a carbon shell. The laser-induced excitation was performed as the particles were still within the reactor zone, and the temperature of the particles could be determined from thermal emission. Both the temperature of the nanoparticles and the relative intensity changes of the emission were monitored as a function of time (with respect to the laser pulse), laser fluence and Ar ambient pressure. At high laser fluences, the particles reached high temperatures, and evidence was found for boiling of iron. Modeling of possible energy-releasing mechanisms such as black-body radiation, thermionic electron emission, evaporation and heat transfer by the ambient gas was also performed. The dominant cooling mechanisms at different ranges of temperature were clarified, together with a determination of the accommodation factor for the Ar–nanoparticle collisions. The strong evaporation at elevated temperatures also led to significant iron loss from the produced particles. PACS 61.46.+w; 81.16.Mk; 65.80.+n     

Nanoparticle sizing by a laser-induced breakdown detection using an optical probe beam deflection

A method for determining the size of a colloidal nanoparticle by measuring the magnitude of the probe beam signal which can be remotely measured in a non-contact manner has been developed. The method using a probe beam signal is intended to employ a principle by which the path of a probe beam is changed by a laser-induced shock wave, accompanying the occurrence of a laser-induced breakdown of colloidal nanoparticles. It was observed that the peak and full width at half-maximum of a frequency distribution curve of the measured magnitude of a probe beam signal appear in direct correlation with the size of a nanoparticle at the fixed pulse energy of a laser beam for the breakdown. A calibration curve for a particle sizing is presented for particle diameters ranging from 20 to 60 nm, with reference polystyrene particles. An application is demonstrated for measuring hexavalent uranium colloidal particles generated by the hydrolysis of free uranyl ions.     

Size dependence of complex refractive index function of growing nanoparticles

The evidence of the change of the complex refractive index function E(m) of carbon and iron nanoparticles as a function of their size was found from two-color time-resolved laser-induced incandescence (TiRe-LII) measurements. Growing carbon particles were observed from acetylene pyrolysis behind a shock wave and iron particles were synthesized by pulse Kr–F excimer laser photo-dissociation of Fe(CO)₅. The magnitudes of refractive index function were found through the fitting of two independently measured values of particle heat up temperature, determined by two-color pyrometry and from the known energy of the laser pulse and the E(m) variation. Small carbon particles of about 1–14 nm in diameter had a low value of E(m)∼0.05–0.07, which tends to increase up to a value of 0.2–0.25 during particle growth up to 20 nm. Similar behavior for iron particles resulted in E(m) rise from ∼0.1 for particles 1–3 nm in diameter up to ∼0.2 for particles >12 nm in diameter.     

Laser-induced incandescence of titania nanoparticles synthesized in a flame

Laser induced incandescence experiments were carried out in a flame reactor during titania nanoparticle synthesis. The structure of the reactor employed allowed for a rather smooth particle growth along the flame axis, with limited mixing of different size particles. Particle incandescence was excited by the 4th harmonic of a Nd:YAG laser. The radiation emitted from the particles was recorded in time and checked by spectral analysis. Results were compared with measurements from transmission electron microscopy of samples taken at the same locations probed by incandescence. This was done covering a portion of the flame length within which a particle size growth of a factor of about four was detected. The incandescence decay time was found to increase monotonically with particle size. The attainment of a process control tool in nanoparticle flame synthesis appears to be realistic.     

Peak soot temperature in laser-induced incandescence measurements

In order to understand the processes involved in the laser-induced incandescence (LII) technique, the value of soot temperature at the peak of the incandescence signal has been studied. To this purpose, an absolute two-color LII technique has been applied on ethylene and methane diffusion flames, based on the comparison with a calibrated tungsten ribbon lamp. The dependence of peak temperature on the fluence has been investigated by using a sharply edged probe beam. Above a certain fluence threshold a value close to 4000 K was obtained for both flames at all locations, that means in largely different soot conditions. At a suitably selected laser fluence, radial and axial profiles of peak soot temperature and volume fraction were performed. Soot volume fraction data have been validated with results from laser extinction technique measurements. The quite low values observed for methane prove the sensitivity of the LII technique. Moreover, a discussion about soot refractive index is presented. In the visible region a test of its influence on both soot volume fraction and soot peak temperature was carried out, while in the infrared the heating process was analyzed. PACS 42.62.b; 42.87-d; 44.40+a     

Laser initiation of PETN–iron nanoparticle composites

The dependences of the probability of explosion initiation in pentaerythritol tetranitrate samples with different contents of iron nanoparticles on the fluence of the first- (λ = 1064 nm) and second-harmonic (λ = 532 nm) pulses of a neodymium laser are measured. The laser initiation threshold for PETN–iron nanoparticle composites nonmonotonically depends on the mass fraction of nanoparticles. The optimal values of the mass fraction of iron nanoparticles at which the sensitivity to laser irradiation is maximal (0.4 wt % for the first harmonic and 0.15 wt % for the second) are determined. It is demonstrated that the amplitude of the optoacoustic signal under non-explosion conditions reaches its maximum for composites with the optimal values of the mass fraction of nanoparticles.     

TR-LII for sizing of carbon particles forming at room temperature

Time-resolved laser-induced incandescence (TR-LII) was applied for the determination of particle sizes during carbon-particle formation from supersaturated atomic carbon vapor that was generated by laser photolysis of carbon suboxide (C₃O₂) at room temperature. Thus, the solid carbon particles were formed under hydrogen-free conditions. The TR-LII technique was used for in situ size measurement of growing carbon particles and samples of final particles were analyzed by transmission electron microscopy (TEM). It was found that the particles grow to a final size of 4–12 nm within 0.02–1 ms. The properties of the obtained particles depend on the initial conditions in the reaction volume, i.e. concentration of carbon suboxide, pressure and type of gas diluter, photolysis wavelength, and laser pulse energy. The comparison of TR-LII and TEM particle sizing results yields information about the effective thermal energy accommodation coefficients for He, Ar, CO, and C₃O₂ molecules on carbon particles. PACS 61.46.Df; 07.60.-j; 78.70.-g     

Laser removal of copper particles from silicon wafers using UV, visible and IR radiation

Laser removal of small copper particles from silicon wafer surfaces was carried out using Nd:YAG laser radiation from near-infrared (1064 nm) through visible (532 nm) to ultraviolet (266 nm). It has been found that both 266 nm and 532 nm are successful in removing the particles from the surface whereas 1064 nm was shown to be ineffective in the removal of particles. The damage-threshold laser fluence at 266 nm was much higher than other wavelengths which provides a much wider regime for safe cleaning of the surface without causing any substrate damage. The cleaning efficiency was increased with a shorter wavelength. The effect of laser wavelength in the removal process is discussed by considering the adhesion force of the particle on the surface and the laser-induced cleaning forces for the three wavelengths. Received: 31 May 2000 / Accepted: 14 July 2000 / Published online: 20 June 2001     

The effects of pulsed laser injection seeding and triggering on the temporal behavior and magnitude of laser-induced incandescence from soot

The effect of sub-nanosecond fluence fluctuations and triggering on time-resolved laser-induced incandescence (LII) from soot has been studied using an injection-seeded pulsed Nd:YAG laser that produces a smooth laser temporal profile. Without injection seeding, this multi-mode laser generates pulses with large intensity fluctuations with sub-nanosecond rise times. The experimental results described here demonstrate that at fluences below 0.6 J/cm² LII signals are insensitive to fluence fluctuations on nanosecond time scales. At fluences above 0.6 J/cm² fluctuations in the laser profile cause the rising edge of the LII profile to move around in time relative to the center of the laser pulse causing a broader average profile that shifts to earlier times. Such fluctuations also lead to a decrease in the average LII temporal profile by up to 12% at a fluence of 3.5 J/cm². A timing jitter on the trigger of the data acquisition, such as that produced by triggering on the laser Q-switch synchronization pulse, has a negligible effect on the shape and temporal maximum of the LII signal. Additional jitter, however, considerably reduces the peak of the LII temporal profiles at fluences as low as 0.15 J/cm². Neither fast fluence fluctuations nor trigger jitter have a significant effect on gated LII signals, such as those used to infer soot volume fraction.     

纳米ZnO粉末中随机激光现象

实验采用三倍频Nd:YAG(波长355 nm，脉宽8ns，频率30Hz) 脉冲激光器作为抽运光源，在ZnO纳米粉末(直径～100 nm)中发现了类似激光现象.并用环形腔理论模拟了ZnO的颗粒密度对平均自由程的影响，从理论上证明在纳秒级激光器的抽运下，ZnO纳米粉末也可以发射激光. 关键词： 类似激光 ZnO纳米粉末 平均自由程     

CoFe2O4纳米粒子的共振散射光谱研究

液相纳米粒子CoFe2O4在400，470，510，800和940nm产生五个共振散射峰。它是一种非线性光散射介质。当激发波长为330nm时，CoFe2O4纳米粒子分别在于330，660和990nm产生一个共振散射峰、一个1/2频散射峰和一个1/3分频散射峰；当激发波长为800nm时，在800nm产生一个共振散射峰，而在400nm产生一个较该共振散射峰更强的2倍频散射峰。分频散射和倍频散射与共振散射有相似的散射行为。根据建立的灰白粒子体系共振散射光谱原理定性解析了CoFe2O4纳米粒子体系的共振散射光谱。