Ordering of TiO2-based nanostructures on SrTiO3(001) surfaces

A class of nanostructured surface phases on SrTiO3(001) is reported and characterized through atomic-resolution scanning tunneling microscopy and Auger electron spectroscopy. These surface phases are created via argon ion sputtering and UHV annealing and form close-packed domains of highly ordered nanostructures. Depending on the type of nanostructures present, the domain ordering exhibit either (6 x 2), (9 x 2), (12 x 2), (6 x 8), or (7 x 4) surface patterning. The nanostructures are composed of TiO2-derived complexes surrounded by a TiO2 surface termination. Such surface ordering phenomena introduce another level of complexity in the chemistry of perovskite oxide surfaces and provide a basis from which potential photocatalytic and molecular-ordering applications may be developed.     

C70 ordering on nanostructured SrTiO3(001)

The nanostructured (7 x 4) surface of SrTiO(3)(001) is used as a template to order C(70) into single-molecule-wide chains and linear islands.     

Surface structures of SrTiO3 (001): a TiO2-rich reconstruction with a c(4 x 2) unit cell

We report the solution of the c(4 x 2) reconstruction of SrTiO(3) (001), obtained through a combination of high-resolution transmission electron microscopy, direct methods analysis, and density functional theory. The structure is characterized by a single overlayer of TiO(2) stoichiometry in which TiO(5) polyhedra are arranged into edge-shared structures, in contrast to the corner-shared TiO(6) polyhedra in bulk. This structural pattern is similar to that reported by us earlier for the (2 x 1) reconstruction of the same crystal face formed at higher temperature. We discuss probable mechanisms of surface stabilization as revealed by these two solutions which are likely to apply to other reconstructions of SrTiO(3) (001) and, possibly, other perovskites in general.     

Atomic structures of the defective SrTiO3 (001) surface

Surface structures of defective SrTiO(3) (001) have been studied by using scanning probe microscopy and density functional theory calculations. We observed several defective surface structures with true atomic resolution under reducing ultrahigh vacuum conditions. It is found that all the defects are terminated by (001), (100) and (010) microfacets of the TiO(2) plane. We propose microfaceting TiO(2) termination with Sr adatom models. The formation of various types of defects is driven by the changes of the surface stoichiometry depending on surface preparations.     

Encapsulated Pd nanocrystals supported by nanoline-structured SrTiO3(001)

Palladium nanocrystals were grown on a nanostructured SrTiO(3)(001) surface and annealed in ultrahigh vacuum at 620 degrees C. This leads to the so-called strong metal-support interaction (SMSI) state, characterized by encapsulation of the metal clusters with an oxide layer. Scanning tunneling microscopy (STM) of the oxide adlayer on the Pd(111) cluster surface reveals two superstructures with different lattice parameters and crystallographic rotations. Interpretation of the STM images is most readily achieved via noncommensurate TiO(x)() surface layers which result in two distinct Moiré patterns.     

First-principles study of the (001) surface of cubic SrHfO(3) and SrTiO(3)

We have performed first-principles calculations on the (001) surface of cubic SrHfO(3) and SrTiO(3) with SrO and BO(2) (B = Ti or Hf) terminations. Surface structure, partial density of states, band structure, and surface energy have been obtained. For the BO(2)-terminated surface, the largest relaxation appears on the second-layer atoms but not on the first-layer ones. The analysis of the structure relaxation parameters reveals that the rumpling of the (001) surface for SrHfO(3) with SrO termination is stronger than that for SrTiO(3). For the HfO(2)-terminated surface of SrHfO(3), the surface state appears near the M point of its band structure.     

Metal/oxide interfacial reactions: Oxidation of metals on SrTiO3 (100) and TiO2 (110)

We studied chemical reactions between ultrathin metal films (Al, Cr, Fe, Mo) and single-crystal oxides (SrTiO3 (100), TiO2 (110)) with X-ray photoelectron spectroscopy (XPS). The work function of the metal and the electron density in the oxide strongly influence the reaction onset temperature (T(RO)), where metal oxidation is first observed, and the rate of metal oxidation at the metal/oxide interfaces. The Fermi levels of the two contacting phases affect both the space charges formed at the interfaces and the diffusion of ionic defects across the interfaces. These processes, which determine metal oxidation kinetics at relatively low temperatures, can be understood in the framework of the Cabrera-Mott theory. The results suggest that the interfacial reactivity is tunable by modifying the Fermi level (E(F)) of both contacting phases. This effect is of great technological importance for a variety of devices with heterophase boundaries.     

On the structural and magnetoelectrical characterization of epitaxial SrRuO3 thin films grown on (001) SrTiO3 substrates

High-quality epitaxial thin films of the ferromagnetic metallic oxide SrRuO₃ (SRO) were fabricated by dc-sputtering at high oxygen pressure and their structural and magnetoelectrical properties were carefully studied. The films featured a Curie temperature T_C ～ 160 K and a magnetic moment of ～0.7 μ_B per Ru ion. The temperature dependent magnetization could be well described by the scaling relation M(T) ∝ (T_C ? T)^β with a critical exponent β = 0.53 over the entire ferromagnetic temperature range. A negative magnetoresistance, MR, on the order of a few percent was found up to room temperature. MR showed a maximum of ～4% right at T_C where a kink structure of the resistivity, ρ, at zero field was flattened out on magnetic field application. This ρ contribution could be related to scattering due to orientational disorder of the Ru magnetic moments which become aligned by an external magnetic field. In addition, an equally strong MR effect, related to localization phenomena, could be observed at lower temperature. Particularly, the second MR peak at ～35 K might be related to a Fermi-liquid to non-Fermi-liquid crossover. A scaling behavior dρ/dT ∝ |T ? T_C|^α was observed only above T_C. Here, values for the exponent α ≈ ?0.4 and α ≈ ?1.4 were obtained in zero field and in a field of 9 T, respectively. The commonly observed ρ minimum, appearing at low temperatures (～3 K in the present case), is correlated with the structural disorder of the SRO films and is believed to have its origin in quantum corrections to the conductivity (QCC).     

Methanol Conversion into Dimethyl Ether on the Anatase TiO2(001) Surface

Exploring reactions of methanol on TiO₂ surfaces is of great importance in both C1 chemistry and photocatalysis. Reported herein is a combined experimental and theoretical calculation study of methanol adsorption and reaction on a mineral anatase TiO₂(001)‐(1×4) surface. The methanol‐to‐dimethyl ether (DME) reaction was unambiguously identified to occur by the dehydration coupling of methoxy species at the fourfold‐coordinated Ti⁴⁺ sites (Ti_4c), and for the first time confirms the predicted higher reactivity of this facet compared to other reported TiO₂ facets. Surface chemistry of methanol on the anatase TiO₂(001)‐(1×4) surface is seldom affected by co‐chemisorbed water. These results not only greatly deepen the fundamental understanding of elementary surface reactions of methanol on TiO₂ surfaces but also show that TiO₂ with a high density of Ti_4c sites is a potentially active and selective catalyst for the important methanol‐to‐DME reaction.     

偏振光作用下金红石型TiO2单晶(001)面的表面光电压谱研究

TiO2是一种优异的光电功能材料,被广泛用于有机污染物光降解及太阳能光电转换[1～3].近年来的研究表明,表面原子排布对TiO2光电效能有决定性的影响.如Lowckamp[3]的研究表明,TiO2的(101)晶面与其它晶面相比具有高的光化学还原Ag+的能力.本文结合偏振光技术与表面光电压谱技术对金红石型TiO2单晶(001)面的光伏响应特性进行了研究,通过对TiO2不同晶面的电子跃迁形式的区分及其对偏振光的不同响应,揭示了表面原子排布与TiO2光电性质之间的关系,实现了对材料功能特性的调控.     

Probing the reaction pathways of DL-proline on TiO2 (001) single crystal surfaces

The reaction of DL-Proline on O2-annealed (stoichiometric) and O-defected (sub-stoichiometric) TiO2 (001) single-crystal surfaces has been investigated. This is of significance in trying to understand the concept of how biomolecules interact with the surfaces of biomedical implants (molecular recognition). On an O2-annealed TiO2 surface, proline is found to largely adsorb then desorb intact at approximately 350 K. DFT (B3LYP) calculations of proline bound to a Ti(OH)4 cluster suggest a binding through the carboxylate functional group rather than through the NH group of the ring. In contrast, proline reaction was considerably different on the O-defected surface. First, proline was further stabilized, evidenced by a shift of its desorption temperature (during temperature-programmed desorption) to approximately 530 K. Along with proline desorption, two distinctive sets of reaction processes occurred at 530 and 630 K, respectively. The first pathway (alpha) at 530 K shows desorption of large amounts of m/e 55 (attributed to 1-azetine) and m/e 42 (attributed to ketene). At still higher temperature, 630 K, a pathway (beta) dominated by the appearance of low masses, mainly m/e 28, 27, and 26, is seen. These masses are tentatively attributed to desorption of HCN, ethylene, and/or acetylene as they represent the logical further decomposition of the different fragments of proline.     

Ab initio study of structural and electronic properties of SrTiO3 (001) oxygen-vacancy surfaces

First-principles calculations are employed to study the surface relaxation and electronic structure of the fully relaxed SrTiO(3) (001) oxygen-vacancy surfaces with both Sr and Ti terminations. In contrast to the perfect surface, the larger surface rumples and smaller interlayer distances have been found. Some in-gap Ti 3d states at about -1.13 eV below the Fermi level were observed in the Ti-terminated surface caused by oxygen vacancies. For the Sr-terminated oxygen-vacancy surface, some in-gap Ti 3d states move into the bulk midgap region to become partially occupied. These theoretical results are in agreement with the experimental data.     

The photocatalysis and mechanism of new SrTiO3/TiO2

The SrTiO₃/TiO₂ was obtained via hydrothermal and sol–gel method and the optimal proportion (5wt %) was confirmed. The compounds have been characterized by XRD, UV–vis DRS, TEM and XPS. The photocatalytic degradation toward gas-phase benzene is almost 40% under UV irradiation, much better than pure TiO₂ and SrTiO₃. Besides, the SrTiO₃/TiO₂ also possessed outstanding performance toward methyl orange in liquid-phase testing. Finally, the electro-chemistry and electron spin-resonance spectroscopy (ESR) provided evidence that the improved photocatalysis is attributed to (1) the matching energy band which can transfer charge carriers efficiently and (2) enhanced generation of photo-electron and free radicals.     

MOCVD过程中金属有机源(C~3H~7)~2Te和(CH~3)~2Cd热裂解机理 质谱实时研究

采用质谱技术实时研究了金属有机源DIPTe和DMCd在MOCVD反应器中热裂解的性质。着重分析了可能发生的气相反应及热裂解机理,并探讨了在CdTe,HgCdTe实际生长条件下两个有机源之间可能发生的相互作用及其对热裂解温度的影响。     

Reactivity of anatase TiO(2) nanoparticles: the role of the minority (001) surface

Methanol adsorption on clean and hydrated anatase TiO(2)(001)-1 x 1 is studied using density functional theory calculations and first principles molecular dynamics simulations. It is found that (i) dissociative adsorption is favored on clean TiO(2)(001) at both low and high methanol coverages; (ii) on the partially hydrated surface, methanol dissociation is not affected by the coadsorbed water and can still occur very easily; (iii) the dissociative adsorption energy of methanol is always larger than that of water under similar conditions. This implies that water replacement by methanol is energetically favored, in agreement with recent experimental observations on colloidal anatase nanoparticles.     

TiO2单晶的表面光电压谱研究

TiO2由于其优异的光电性质及高的化学稳定性而受到广泛关注,并且被应用于有机污染物光降解[1]、太阳能光电转换[2]等诸多领域.由于制备方法不同,TiO2往往会呈现出不同的光电性质,尽管其晶型与粒度可能相差甚微[3].近年来研究表明,除晶型、粒度等因素外,表面原子排布在决定材料光电性质方面同样有重要贡献[4,5].本文采用表面光电压谱(SPS)及场诱导表面光电压谱(EFSPS)研究了TiO2单晶(001)面的光伏响应.     

In situ investigation of dye adsorption on TiO2 films using a quartz crystal microbalance with a dissipation technique

Dye adsorption plays a crucial role in dye-sensitized solar cells. Herein, we demonstrate an in situ liquid-phase analytical technique to quantify in real time adsorption of dye and coadsorbates on flat and mesoporous TiO(2) films. For the first time, a molar ratio of co-adsorbed Y123 and chenodeoxycholic acid has been measured.     

The sensitization of SrTiO3 and TiO2 photoelectrodes by surface doping

Photoanodes for the visible-light photoelectrolysis of water have been prepared by surface doping of SrTiO₃ and TiO₂ single crystals. The applied dopants are LaCrO₃ and Cr₂O₃. Photocurrent densities have been measured as a function of wavelength. The response to visible light decreases in the sequence SrTiO₃: LaCrO₃, TiO₂: Cr₂O₃ and SrTiO₃: Cr₂O₃. The TiO₂: LaCrO₃ electrode does not respond to visible light. The results are discussed using electron microscope analysis.