Magnetic properties of Nd3+ in Nd−Ba−Cu−O-compounds

Neutron diffraction, neutron spectroscopy and magnetization measurements have been employed to study the structural, electronic, and magnetic behavior of eleven compounds with the general formula Nd_1+y Ca _v Ba_2–y–v Cu₃O _x (0y0.5; 0v0.25; 6x7). The structure turned out to react to oxygen reduction similar as other 123-compounds, yielding discontinuities close to the metal-insulator-transition and the well-known relations of bond lengths as a function ofT _c. The crystalline electric field (CEF) interaction, splitting the 10-fold degenerate ground-state J-multiplet of the Nd³⁺-ions into five doublet states, was investigated by neutron spectroscopy. The derived CEF parameters have been used to determine changes in the electronic surroundings of the Nd³⁺ ions. In addition, with the help of the CEF parameters the thermodynamic magnetic properties of these compounds were calculated which turn out to be in good agreement with the experimental data.     

Electrophysical properties of Pb1−xGdxTe

The solid solution system PbTe-GdTe has been investigated. Polycrystalline samples have been formed by the direct synthesis method. Metallographie and X-ray diffractometric analysis was performed. The microhardness was investigated and the Hall coefficient was measured over the temperature range 77–300 K. The experimental results show the donor action of the Gd and that the samples are single phase.     

Optical properties of Hg1−xCdxTe

Optical properties of Hg_1−xCd_xTe are summarized in this study. Based on Penn-like models, the Moss relation and the Wemple and DiDomenico approach, calculations of energy gap, plasmon energy, Fermi energy, oscillator strength and electronic polarizability have been made. Comparisons are made with the data available in the literature. Details of the dependency of the properties on composition are presented.     

Thermoelectric properties of Cr1−xMoxSi2

The thermoelectric properties of Mo-substituted CrSi₂ were studied. Dense polycrystalline samples of Mo-substituted hexagonal C40 phase Cr_1−xMo_xSi₂ (x=0–0.30) were fabricated by arc melting followed by spark plasma sintering. Mo substitution substantially increases the carrier concentration. The lattice thermal conductivity of CrSi₂ at room temperature was reduced from 9.0 to 4.5 W m⁻¹ K⁻¹ by Mo substitution due to enhanced phonon–impurity scattering. The thermoelectric figure of merit, ZT, increases with increasing Mo content because of the reduced lattice thermal conductivity. The maximum ZT value obtained in the present study was 0.23 at 800 K, which was observed for the sample with x=0.30. This value is significantly greater than that of undoped CrSi₂ (ZT=0.13).     

Structural and superconducting properties of Eu1−xPrxBaSrCu3O7−δ

We have investigated the structural and superconducting properties of Eu_1−xPr_xBaSrCu₃O_7−δ by X-ray diffraction analysis, AC and DC magnetization and DC resistivity measurements. The parent compound crystallizes in the orthorhombic symmetry which transforms to tetragonal symmetry at x=0.2. Superconducting transition temperature T_c decreases monotonically with increasing x which approaches zero at x=0.6. The enhancement in critical concentration x_cr observed in Eu_1−xPr_xBa₂Cu₃O_7−δ on replacing 50 at.% Ba by Sr is attributed to the resulting local structural changes.     

Synthesis,microstructure and dielectric properties of (1−x)PSN−xPLuN

Ceramic lead niobates and their solid solutions PSN–PLuN (pure lutecium niobate) were synthesized by solid state reactions. The sequence of phases formed at PSN–PLuN synthesis has been studied by X-ray analysis. Their symmetry changed from rhombohedral for PSN to pseudo-monoclinic for the 0.75PSN–0.25PLuN compositions. The performed EDS investigations revealed that the samples PSN–PLuN are perfectly sintered. They contain a little glassy phase and their grains are well shaped. The increase of lutecium content in the examined solid solution caused downward shift of the temperature of the phase transition. The decrease of the achieved permittivity values ? was observed as well.     

Dielectric properties of NaCl1−xBr and KCl1−xBrx mixed ionic solution

In the present paper a three-body potential model (TBPM) has been employed for the analysis of dielectric behaviour of NaCl-NaBr and and KCl-KBr mixed crystals with varying compositions. The physical properties like dielectric constants ( ₀ and ), optic mode frequencies ( _OLO and _TO), effective charge parameter (e _s ^* ), optic mode Grüneisen parameters and strain derivatives of ₀ and dielectric constants have been calculated. The results achieved in the present study are found in fairly good agreement with the available experimental data. The results obtained by previous investigators are also shown for the sake of comparison.     

Thermoelectric properties of the Nd2−x Ce x CuO4−y system

The temperature dependence of the Seebeck coefficient (in region 300–900 K) and the lattice constants of Nd_2–x Ce_xCuO_4–y (x=0, 0.05, 0.10, 0.15) with different oxygen content were measured. The value of S is always negative and it decreases with both Ce content and oxygen non-stoichiometry. At a certain concentration of Ce and oxygen in the material, the Seebeck coefficient becomes temperature-independent.The authors would like to thank Professor J. Horák of University of Chemical Technology, Pardubice for helpful discussions.     

Optical properties of Li1−xNb1−xEu2xO3 solid solutions

Abstract

The effects of europium substitution on crystalline solubility, structural changes and optical properties of LiNbO₃ is reported. Li_1?xNb_1?xEu_2xO₃ solid solutions exist over a very limited range of europium concentrations (x ≤ 0.01). The solid solutions were characterized by X-ray powder diffraction and density measurements. Within the range of compositions of the solid solutions, the optical properties (emission and excitation spectra) of the Eu³⁺ ions have been characterized. The obtained optical data indicate that two equally abundant europium luminescent species exist in the stoichiometric speciments; these correspond to the Eu³⁺ ions occupying the Li⁺ and Nb⁵⁺ sites, in agreement with the replacement mechanism which is inferred from density measurements. Other Eu³⁺ luminescent species which appear to be closely related with lithium deficiency were found to exist in nonstoichiometric samples, in addition to those which are present in the stoichiometric materials.     

Magnetic properties of Fe−Mn−Al alloy system in the FCC disordered phase

In this work we report the experimental studies of Fe?Mn?Al alloys in the FCC disordered phase at room temperature by Mössbauer spectroscopy and X-ray diffraction. In this phase the alloys are antiferromagnetic with a constant mean hyperfine field ( \(\bar H\) ) near 26 kOe in the composition range from 0 to 7.5 at.% Al and 50 to 65 at.% Fe. When the Al or Fe concentration increases, the \(\bar H\) value gradually decreases to zero and the alloy becomes paramagnetic. In the same way when the Al concentration increases the lattice parameter increases linearly but when the Fe concentration increases the lattice parameter remains nearly constant for alloys with 5 at.% Al and decreases for alloys with 10 at.% Al.     

Magnetic properties of amorphous MnxPd82−xGe18 alloys

Magnetoresistivity, magnetic, susceptibility and high field magnetization measurements were performed on the amorphous Mn _x Pd_82–x Ge₁₈ alloys for 1x7. These amorphous alloys were prepared by radio frequency (R. F.) sputtering using argon, depositing onto fused quartz substrates to a thickness of about 20 microns. The negative magnetoresistivity is approximately proportional to the square of the magnetization and the susceptibility obeying the Curie-Weiss law between 18 and 293 K. These results lead to the conclusion that a Kondo-type s-d exchange interaction exists in the amorphous Mn-Pd-Ge alloys and the d-d, spin correlation between magnetic atoms is, in general, weaker in the amorphous alloys than in the corresponding crystalline alloys.     

Magnetic properties of As-spun MmxFe92−xB8 ribbons

X-ray phase analysis and magnetic measurements have been made on melt-spun Mm_xFe_92−xB₈ alloys (10 < x < 23.5, Mm - Mishmetal). The existence of a Mm₂Fe₁₄B phase have been confirmed. The alloys investigated exhibit hard magnetic properties with (BH)_max and _iH_c up to 9.1 MGOe and 10.5 kOe, respectively.     

Synthesis and superconductivity properties of Ba1−xKxBiO3

Ba_1?xK_xBiO₃ with x from 0.315 to 0.6 were successfully synthesized by molten salts method and characterized by XRD and magnetic susceptibility measurements. It is found that Ba_1?xK_xBiO₃ powders could directly be precipitated from KOH melts. Superconductivity has been observed in all samples and the highest superconducting transition temperature was found to be T_c = 30.6 K with x = 0.4. The lattice constant linearly depended on the potassium content in accord with the equation of a = 4.3548–0.1743x, and the decrease of the mole ratio of Bi³⁺/Bi⁵⁺ resulted in the increase of the potassium content, which suggested the disproportionation of Bi valence.     

Dielectric and piezoelectric properties of (Bi1−x−yNdxNa1−y)0.5BayTiO3 lead-free ceramics

New lead-free (Bi_1−x−yNd_xNa_1−y)_0.5Ba_yTiO₃ ceramics were prepared by a conventional ceramic technique and their dielectric and piezoelectric properties were studied. X-ray diffraction studies reveal that Nd³⁺ and Ba²⁺ diffuse into the Bi_0.5Na_0.5TiO₃ lattices to form a new solid solution with a pure perovskite structure, and a morphotropic phase boundary (MPB) of rhombohedral and tetragonal phases is formed at 0.04 < y < 0.10. The partial substitutions of Nd³⁺ and Ba²⁺ decrease effectively the coercive field E_c and increase significantly the remanent polarization P_r. Because of lower E_c, larger P_r and the formation of the MPB, the piezoelectric properties of the ceramics are significantly enhanced at x/y = 0.02/0.06: d₃₃ = 150 pC/N and k_p = 30.5%. The ceramics exhibit relaxor characteristic, which is probably resulted from the cation disordering in the 12-fold coordination sites. The depolarization temperature T_d shows a strong compositional dependence and reaches a minimum value at the MPB. The temperature dependences of the ferroelectric and dielectric properties suggest that the ceramics may contain both the polar and non-polar regions near the depolarization temperature T_d, which cause the polarization hysteresis loop become deformed near/above T_d.     

Critical properties of superconducting Ba1−xKxFe2As2

Magnetisation and magneto-resistance measurements have been carried out on superconducting Ba_1?xK_xFe₂As₂ samples with x = 0.40 and 0.50. From high field magnetization hysteresis measurements carried out in fields up to 16 T at 4.2 K and 20 K, the critical current density has been evaluated using the Bean critical state model. The J_C determined from the high field data is >10⁴ A/cm² at 4.2 K and 5 T. The superconducting transitions were also measured resistively in increasing applied magnetic fields up to 12 T. From the variation of the T_C onset with applied field, dH_C2/dT at T_C was obtained to be ?7.708 T/K and ?5.57 T/K in the samples with x = 0.40 and 0.50.     

Crystallographic and optical properties of Li1−xTa1−xEu2xO3 solid solutions

Abstract

The effects of europium substitution on crystalline solubility, structural changes and optical properties of Li_1?xTa_1?xEu_2xO₃ solid solutions are reported. The solid solutions exist over a very limited range of europium concentrations (x ≤ 0.02). They were characterized by X-ray powder diffraction and density measurements. The liquid nitrogen fluorescence and excitation spectra of Eu³⁺ in the solid solutions were measured in the frequency range 12,200–45,450 cm^?1. The emission mainly arises from the ⁵ D ₀ level to Stark components of the five lowest ⁷ F _j (j = 0, 1, 2, 3, 4) states. It was inferred from the analyses of the optical and density data that the Eu³⁺ ions may lie on both Li and Ta sites, but not on the intrinsic vacant lattice sites.