Mg(NH2)2-2LiH储氢材料的研究进展

Mg(NH₂)₂-2LiH 材料是近年来发展起来的几种最具应用潜力的高容量储氢材料之一. 由于具有较合适的吸放氢热力学性能、相对较低的吸放氢操作温度、较高的可逆储氢容量和较优的吸放氢循环稳定性,Mg(NH₂)₂-2LiH 材料现已成为储氢材料研究领域的一个热点. 本文综述了Mg(NH₂)₂-2LiH 材料近年来的研究进展, 重点关注了材料的组分、晶体结构、颗(晶)粒尺寸和催化动力学改性等对材料储氢性能的影响及储氢机理,总结了Mg(NH₂)₂-2LiH 储氢材料存在的技术问题并指出了今后的研究方向.     

固溶体MAX相(Ti0.5V0.5)3AlC2的制备及其对MgH2储氢性能的催化影响

通过无压烧结法制备了固溶体MAX相(Ti_(0.5)V_(0.5))_3AlC_2,研究了其添加对MgH_2储氢性能的影响。结果发现,固溶体MAX相(Ti_(0.5)V_(0.5))_3AlC_2中的Ti和V元素通过协同作用,呈现出更高的催化活性。添加质量分数10%(Ti_(0.5)V_(0.5))_3AlC_2的MgH_2样品的起始放氢温度为230℃,较原始MgH_2降低了60℃。在275℃下等温放氢,(Ti_(0.5)V_(0.5))_3AlC_2添加样品的放氢速率可达0.35%·min~(-1),是原始MgH_2样品的4倍左右。此外,完全放氢后的MgH_2-10%(Ti_(0.5)V_(0.5))_3AlC_2样品在150℃、5 MPa氢压下,可在60 s内吸收4.7%的氢。计算显示,MgH_2-10%(Ti_(0.5)V_(0.5))_3AlC_2样品的表观活化能为79.6 kJ·mol~(-1),较原始MgH_2(153.8 kJ·mol~(-1))降低了48%,这是MgH_2放氢性能得到改善的主要原因。     

添加C10H10Cl2Ti对6LiBH4-CaH2-3MgH2体系储氢性能的影响

C_(10)H_(10)Cl_2Ti的添加可以有效改善6LiBH_4-CaH_2-3MgH_2样品吸放氢性能,添加的质量分数为5%时具有较好的催化效果。样品的起始和终止放氢温度比原始样品分别降低约30和25℃,可逆储氢量(质量分数)约为8.1%。添加C_(10)H_(10)Cl_2Ti催化剂的样品在360℃下等温放氢速率比原始样品提高了178%。两步放氢反应的表观活化能分别为131.4和138.8 kJ·mol~(-1),相比原始样品降低了约18.6%和15.8%。利用X射线光电子能谱(X-ray photoelectron spectroscopy,XPS)对样品进行分析发现,热分解过程中C_(10)H_(10)Cl_2Ti生成了多价态的Ti化合物,催化了LiBH_4与CaH_2的反应,从而改善了复合体系的储氢性能。     

配合物(ArO)2Yb(NPh2)2K(THF)4(Ar=C6H2-t-Bu3-2,4,6)的合成、分子结构和催化行为

Reaction of anhydrous YbC13 with 2 equiv, of sodium 2,4,6-tri-tert-butylphenoxide (ArONa, Ar=C6H2-t-Bu3-2,4,6) and 2 equiv, of potassium diphenyl amide in THF afforded the first bis(aryloxo) amido-lanthanide complex of (ArO)2Yb(NPh2)2K(THF)4 (1). In 1, the ytterbium and potassium were bridged via diphenyl amido ligands.The ytterbium metal center was coordinated to two oxygen atoms of aryloxide ligands and two nitrogen atoms of diphenyl amido ligands in a conventional distorted tetrahedral fashion, while the potassium interacted in η^2-fashion with two phenyl rings of the diphenyl amido ligands besides four THF molecules. 1 displayed moderate catalytic activities for the polymerization of methyl methacrylate and acrylonitrile.     

Li-Mg-N-H体系储氢材料的热力学和动力学调控

Mg（NH₂）₂-2LiH体系储氢材料具有较高的储氢容量和较适宜的热力学性能,并且其吸放氢过程完全可逆,是目前最有望实现大规模应用的固态储氢材料之一。然而,由于该体系在吸放氢过程中具有较高的动力学壁垒,导致其在200℃以上才能实现快速地吸放氢。因此,国际上对该体系储氢材料的研究主要集中在热力学和动力学的调控方面。本文从成分调变、纳米化和掺杂改性等方面,详细综述了Mg（NH₂）₂-2LiH体系储氢材料热力学和动力学调控的研究现状,并提出了其中存在的问题和相应对策,同时指出了将来的研究方向。     

［Mo(dtc)4］［Eu(dtc)4］和［Mo(dtc)4］［Er(dtc)4］的光谱电化学研究

本文报道利用循环伏安法和紫外可见光谱法测定了过渡金属钼、镧系元素铕和铒与N、N-二乙基二硫代氨基甲酸根(dtc)构成的八配位离子对配合物：［Mo(dtc)₄］［Eu(dtc)₄］和［Mo(dtc)₄］［Er(dtc)₄］的氧化还原特性和光谱性质。实验证实，配合物的配正离子［Mo(dtc)₄］⁺比配负离子［Eu(dtc)₄］^-和［Er     

一个新颖的三维异核锑(III)-镨(III)配合物[Sb2-μ4-(EDTA)2Pr(H2O)5]NO3•4H2O的合成、晶体结构及热分解研究

合成了锑-镨与乙二胺四乙酸形成的新颖三维配合物[Sb₂-μ₄-(EDTA)₂Pr(H₂O)₅]NO₃•4H₂O, 用元素分析、红外光谱、热分析及X射线单晶衍射法等进行了组成和结构表征. 结果表明该配合物属正交晶系, 空间群Pnn2; 晶胞参数: a＝1.07031(2) nm, b＝2.30805(4) nm, c＝0.72343(2) nm, V＝1.78711(7) nm³, Z＝2, D_c＝2.202 g/cm³, F(000)＝1164, μ＝2.955 mm^－1, GOF＝1.000, 最终偏离因子R₁＝0.0203, wR₂＝0.0545 [I＞2σ(I)]. 在标题化合物中, 每个镨(III)离子的配位数为9, 与五个水分子中的五个氧原子和四个羧基氧原子配位, 形成三帽三角棱柱空间配位多面体. 锑(III)与EDTA离子中的四个氧原子和两个氮原子配位, 在赤道平面上有一孤对电子. 同时讨论了配合物的热分解过程.     

[Mn(NH2NHCO2C2H5)3](NO3)2的晶体结构和热分解机理

[Mn(ECZ)₃](NO₃)₂ is newly prepared by the aqueous solutions of Mn(NO₃)₂ and ethyl carbazate (ECZ). The crystal structure has been determined by X-ray crystal diffraction analysis. It belongs to monoclinic with space group of P2₁/n. The crystal parameters are: a=1.3974(2) nm, b=0.8796(2) nm, c=3.4322(7) nm, β=91.25(1) °, V= 4.2175(1) nm³, Z=8. Its molecular weight is 491.30. Mn²⁺ is located on the center of the molecular structure. Ethyl carbazate serves as a bidentate ligand which coordinates to the metal cations with its carbonyl oxygen atom and the terminal hydrazine nitrogen atom, forming five-member chelating rings, and three such rings are formed in each molecule. The coordination number of the metal ion is six and the coordination configuration of the central ion is octahedral. Specially, antimer configuration phenomenon is found in the molecule. The complex is further characterized by element analysis and IR measurements. The thermal decomposition mechanism is studied by using TG-DTG and DSC techniques. CCDC: 215675.     

蝎型铜配合物：Cu2[ μ-pz]2[HB(pz)3]2和Cu[B(pz)4]2的合成、结构及热分解动力学性质

本文设计合成了两种以聚吡唑硼酸盐、吡唑为配体的铜配合物Cu₂[ μ-pz]₂[HB(pz)₃]₂(1)和Cu[B(pz)₄]₂(2)(pz：吡唑(C₃H₄N₂))。运用元素分析、红外光谱对配合物进行了表征，并用X-ray衍射测定了它们的晶体结构。非等温热分解动力学研究表明：配合物1的热分解反应分两步，配合物2的热分解反应一步进行。通过计算，配合物1热分解的第一步反应的可能机理为成核与生长，n=1/4；第二步反应的可能机理为化学反应。其非等温动力学方程分别为：dα/dT=A/β e^-E/RT·1/4(1-α)[-ln(1-α)]^-3和dα/dT=A/β e^-E/RT·(1-α)²。分解反应的表观活化能分别是520.37 kJ·mol^-1和149.65 kJ·mol^-1；指前因子lnA分别是118.06 s^-1和28.10 s^-1。配合物2热分解的可能机理为化学反应。其非等温动力学方程为：dα/dT=A/β e^-E/RT·(1-α)²。分解反应的表观活化能是111.41 kJ·mol^-1；指前因子lnA是21.20 s^-1。     

Spectroscopic properties of guanidinium zinc sulphate [C(NH2)3]2Zn(SO4)2 and ab initio calculations of [C(NH2)3]2 and HC(NH2)3

Raman and FTIR spectra of guanidinium zinc sulphate [C(NH₂)₃]₂Zn(SO₄)₂ are recorded and the spectral bands assignment is carried out in terms of the fundamental modes of vibration of the guanidinium cations and sulphate anions. The analysis of the spectrum reveals distorted SO₄²⁻ tetrahedra with distinct S–O bonds. The distortion of the sulphate tetrahedra is attributed to Zn–O–S–O–Zn bridging in the structure as well as hydrogen bonding. The CN₃ group is planar which is expressed in the twofold symmetry along the C–N (1) vector. Spectral studies also reveal the presence of hydrogen bonds in the sample. The vibrational frequencies of [C(NH₂)₃]₂ and HC(NH₂)₃ are computed using Gaussian 03 with HF/6-31G* as basis set.     

Crystal structure and single crystal EPR of (NH4)2(15-crown-5)3[Cu(mnt)2] and (NH4)2(benzo-15-crown-5)4[Cu(mnt)2]·0.5H2O

The X-ray crystal structures of (NH4)2(15-crown-5)3[Cu(mnt)2] (1) and (NH4)2(benzo-15-crown-5)4- [Cu(mnt)2]·0.5H2O (2) were determined. Two single crystals are composed of distinct structures of ammonium-crown ether supramolecular cation and [Cu(mnt)2]2- anion. The triple-decker dication in complex 1 and a sandwich dimmer in complex 2 were observed. X-Band EPR studies on the single crystals of both complex 1 and complex 2 have been carried out at room temperature, which revealed that complex 2 showed a perfect hyperfine structure of Cu whereas that of complex 1 could not be observed. The principal values and direction cosines of the principal axes of the g and A tensors were computed by a least-squares fitting procedure. The spin density of Cu(Ⅱ) was estimated according to the principal values of the A tensors and compared well with the results calculated based on DFT method.     

硝酸镁在γ-Al2O3上的热分解及MgO/γ-Al2O3

研究了不同载量时Mg(NO     

Eu2(p-ClC6H4COO)6(C12H8N2)2配合物热分解机理及非等温动力学

The thermal decomposition behaviour of europium p-chlorobenzoate complex with 1, 10-phenanthroline and its kinetics were studied in nitrogen by non-isothermal thermogravimetry.Its thermal decomposition occurs mainly in three steps..The intermediate and residue for each step of decomposition were identified from TGcurve.The kinetic parameters were obtained from analysis of the TG-DTG curves by the Achar method.the Madhusudanan- Krishnan-Niman (MKN) method and Ozawa method respectively.The most probable mechanisms function for the first and second stage were suggested by comparing the kinetic parameters.     

矿化剂对水热法改性氢氧化镁晶体的影响

近几年来,氢氧化镁作为一种无机阻燃剂由于其具有制备条件相对温和,生产工艺简单且产品与自然环境友好等特点,在研究及生产活动方面备受关注且得到了长足的发展[1～4].目前采用氢氧化钠法进行反应一水热制备高分散阻燃级氢氧化镁的工艺路线已经比较成熟[5～8].然而,不利的是,氢氧化钠偏高的价格导致了产品的制造成本较高.而采用石灰法制备氢氧化镁阻燃剂具有价格低廉的特点,引起了人们的关注.     

LaMg_2Cu_(1-x)Ni_x(x=0～0.90)合金的相结构及储氢性能

利用真空感应熔炼技术制备了LaMg2Cu1-xNix(x=0,0.10,0.25,0.50,0.75,0.90)合金,并在0.06MPa氩气保护下于723K退火6h得到测试所用合金铸锭。XRD表明合金LaMg2Cu1-xNix含有ThCr2Si2型的LaMg2Cu2相和CeMg3型的LaMg3相以及少量未知相,随着x的增加,LaMg2Cu2相的晶胞体积先增加后减小,而LaMg3相的晶胞体积几乎不变。通过SEM观察,发现Ni可以有效的减小合金在吸放氢过程中的粉化。当x0.50时,Ni对合金的吸氢速率降低;而当x≥0.50时,Ni的加入可以极大的提高合金的吸氢速率,合金在50s左右就能达到最大吸氢量的90%。当x=0.50时,合金具有较好的综合储氢性能,合金在473K下吸氢量为3.741wt%,49s就可达到最大吸氢量的90%以上。     

Theoretical Studies on Dehydrogenation Reactions in Mg2(BH4)2(NH2)2 Compounds

Borohydrides have been recently hightlighted as prospective new materials due to their high gravimetric capacities for hydrogen storage. It is, therefore, important to under-stand the underlying dehydrogenation mechanisms for further development of these ma-terials. We present a systematic theoretical investigation on the dehydrogenation mecha-nisms of theMg₂(BH₄)₂(NH₂)₂ compounds. We found that dehydrogenation takes place most likely via the intermolecular process, which is favorable both kinetically and thermo-dynamically in comparison with that of the intramolecular process. The dehydrogenation of Mg₂(BH₄)₂(NH₂)₂ initially takes place via the direct combination of the hydridic H in BH₄^- and the protic H in NH₂^-, followed by the formation of Mg-H and subsequent ionic recombination of Mg-H^δ- …H^δ+N.